Skip to main content
AuthorsTitleJournalYearDOI/URL
G., G., Gupta, N.K., S., S., Karade, S.R., Zeidler, H., Krishnaiyengari, N. and K. P., K.Effect of Varying Layer Thickness by Interlayer Machining on Microstructure and Mechanical Properties in Wire Arc Additive ManufacturingPreprint2025

DOI

Abdulrazaq, M.M., AL-Khafaji, M.M.H., Salahaddin, A.K., Krinke, S. and Zeidler, H.Out-Of-Position Bead Geometry Prediction in Wire Arc Additive Manufacturing (WAAM) Using Fuzzy Logic-Based SystemManagement Systems in Production Engineering; Vol. 33(1), pp. 46-53 2025DOI
Freitag, L., Storti, E., Bretschneider, L., Zeidler, H., Hubálková, J. and Aneziris, C.G.Binder jetting of spinel-based refractory materials - processing, microstructure and propertiesAdditive Manufacturing; Vol. 102, pp. 104727 2025DOI
Karade, S.R., Siddhartha, S., Gupta, N.K., G, G., Karunakaran, K.P. and Zeidler, H.Hybridisation in Metal Wire Additive Manufacturing: A Case Study of an ImpellerMetals; Vol. 15(1), pp. 71 2025DOI
Valentinčič, J., Koroth, J.E. and Zeidler, H.Advancements in surface finish for additive manufacturing of metal parts: a comprehensive review of plasma electrolytic polishing (PEP)Virtual and Physical Prototyping; Vol. 19(1) 2024DOI
Aubel, I., Krinke, S., Mende, R., Dietrich, A., Bertau, M., Zeidler, H. and Zug, S.Industry 4.0-Driven STEM-Lab Modernisation: Balancing Flexibility and SustainabilityChemie Ingenieur Technik; Vol. 96(11), pp. 1482-1489 2024DOI
Shah, A., Gupta, N.K., Aliyev, R. and Zeidler, H.Study of Various Process Parameters on Bead Penetration and Porosity in Wire Arc Additive Manufacturing (WAAM) of Copper Alloy Cu1897Applied Sciences; Vol. 14(20), pp. 9188 2024DOI
Valentinčič, J., Zeidler, H., Böttger, T. and Jerman, M.Influence of Anode Immersion Speed on Current and Power in Plasma Electrolytic PolishingMicromachines; Vol. 15(6), pp. 783 2024DOI
Edaklavan Koroth, J., Valentini, J., Jerman, M., Sabotin, I., Lebar, A., Govekar, E., Jeromen, A., Zeidler, H., Böttger, T., Tischner, F., Zohar-Hauber, K. and Osovski, S.Plasma electrolytic polishing of additively manufactured metal parts: Optimising the post processing workflow [version 1; peer review: awaiting peer review]Open Research Europe; Vol. 4(48) 2024DOI
Berkemeier, A., Kühnel, L., Dürigen, D., Hoffmann, H., Zeidler, H., Bullinger, A.C. and Wagenführ, A.SAMSax-An Innovative Living Lab for the Advancement of a Circular Economy through Additive Manufacturing TechnologiesSustainability (Switzerland); Vol. 16(2) 2024DOI
Navickaitė, K., Langenhan, S., Köckritz, J., Sherstneva, A., Nestler, K., Penzel, M., Wendler, M., Szlosarek, R., Hauser, M., Volkova, O., Kröger, M. and Zeidler, H.Three modes of plasma electrolytic polishing of high-alloy austenitic steelResults in Surfaces and Interfaces; Vol. 17, pp. 100288 2024DOI
Navickaitė, K., Nestler, K., Penzel, M., Böttger-Hiller, F. and Zeidler, H.Preliminary experimental study on simultaneous polishing and shape setting of Nitinol wireSN Applied Sciences; Vol. 5(10) 2023DOI
Navickaitė, K., Böttger, T., Nestler, K., Penzel, M., Schröder, S., Stepputat, V., Böttger-Hiller, F. and Zeidler, H.Electrolyte optimisation for effective plasma electrolytic polishing of brassResults in Surfaces and Interfaces; Vol. 12, pp. 100133 2023DOI
Shah, A., Aliyev, R., Zeidler, H. and Krinke, S.A Review of the Recent Developments and Challenges in Wire Arc Additive Manufacturing (WAAM) ProcessJournal of Manufacturing and Materials Processing; Vol. 7(3), pp. 97 2023DOI
Salih, R.M., Kadauw, A., Zeidler, H. and Aliyev, R.Investigation of LCD 3D Printing of Carbon Fibre Composites by Utilising Central Composite DesignJournal of Manufacturing and Materials Processing; Vol. 7(2), pp. 58 2023DOI
Aliyev, R., Zeidler, H., Krinke, S. and Voigt, K.Developing new areas of application and supporting structural change: Use of additive manufacturing in the construction of musical instruments,Einsatz der Additiven Fertigung im MusikinstrumentenbauVDI-Z Integrierte Produktion; Vol. 165(1-2), pp. 67-69 2023
Wamuti, G.N., Mwangi, J.W., Karanja, S.K., Micke, L. and Zeidler, H.Optimisation of Extrusion Process Parameters of Recycled High-Density Polyethylene-Thermoplastic Starch Composite for Fused Filament FabricationOpen Journal of Composite Materials; Vol. 13(04), pp. 69-86 2023DOI
Hadi, A., Kadauw, A. and Zeidler, H.The effect of printing temperature and moisture on tensile properties of 3D printed glass fibre reinforced nylon 6Materials Today: Proceedings; Vol. 91, pp. 48-55 2023DOI
Zeidler, H., Böttger, T., Schröder, S., Schneider, M., Lämmel, C., Sahr, F., Tardelli, J. and Exbrayat, L.Analysis of Plasma-Electrolytic Polishing Process InitiationProcedia CIRP; Vol. 108(C), pp. 782-786 2022
Quitzke, S., Kröning, O., Safranchik, D., Zeidler, H., Danilov, I., Martin, A., Böttger-Hiller, F., Essel, S. and Schubert, A.Design and setup of a jet-based technology for localised small scale Plasma electrolytic PolishingJournal of Manufacturing Processes; Vol. 75, pp. 1123-1133 2022
Lamottke, M., Micke, L., Zeidler, H., Berger, T., Loebel, S., Martin, A., Schubert, A., Steinert, P. and Müller, P.EFFICIENT FUSED FILAMENT FABRICATION OF LARGE-SCALE PARTS WITH HIGH RESOLUTION2022 ASPE and euspen Summer Topical Meeting on Advancing Precision in Additive Manufacturing, pp. 126-130 2022
Navickaite, K., Nestler, K., Böttger-Hiller, F., Matias, C., Diskin, A., Golan, O., Garkun, A., Strokin, E., Biletskiy, R., Safranchik, D. and Zeidler, H.Efficient polishing of additive manufactured titanium alloysProcedia CIRP; Vol. 108(C), pp. 346-351 2022
Zeidler, H. and Böttger-Hiller, F.Plasma-Electrolytic Polishing as a Post-Processing Technology for Additively Manufactured PartsChemie-Ingenieur-Technik; Vol. 94(7), pp. 1024-1029 2022
Schulze, H.-P., Zeidler, H., Kröning, O., Böttger-Hiller, F. and Herzig, M.Process analysis of plasma-electrolytic polishing (PeP) of forming toolsInternational Journal of Material Forming; Vol. 15(1) 2022
Zeidler, H., Aliyev, R. and Gindorf, F.Zeidler, H., Aliyev, R. and Gindorf, F.Journal of Manufacturing and Materials Processing; Vol. 5(4), pp. 106 2021DOI
Navickaitė, K., Ianniciello, L., Tušek, J., Engelbrecht, K., Bahl, C.R.H., Penzel, M., Nestler, K., Böttger-Hiller, F. and Zeidler, H.Plasma Electrolytic Polishing of Nitinol: Investigation of Functional PropertiesMaterials; Vol. 14(21), pp. 6450 2021DOI
Stepputat, V.N., Zeidler, H., Safranchik, D., Strokin, E. and Böttger-Hiller, F.Investigation of Post-Processing of Additively Manufactured Nitinol Smart Springs with Plasma-Electrolytic PolishingMaterials; Vol. 14(15), pp. 4093 2021DOI
Nitzsche, S., Zeidler, H., Frank, R. and Schubert, T.Experimental investigation of the manufacturability of a very fine optimised venting system using a combination of SLM and EDMProceedings of the 21st International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2021, pp. 73-74 2021
Belitz, S., Scheider, D. and Zeidler, H.Hybrid-Additive Manufacturing Of Press Tools With Laser Direct Energy Deposition Using Buffer Layers To Reduce Cracking IssuesEuro PM2021 Congress Proceedings 2021
Krinke, S., Zeidler, H., Witt, S. and Gaßmann, C.Influence of deposition angle in hybrid wire arc additive manufacturingProceedings of the 21st International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2021, pp. 85-86 2021
Stepputat, V., Safranchik, D., Zeidler, H. and Böttger-Hiller, F.Influence of plasma electrolytic polishing on the surface morphology of additively manufactured Ni-Ti-parts investigated on the basis of smart springsProceedings of the 21st International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2021, pp. 83-84 2021
Mäller, C., Oelmann, M. and Zeidler, H.Optimisation of a large-volume FFF-PrinterProceedings of the 21st International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2021, pp. 87-88 2021
Schirmer, R., Abendroth, M., Roth, S., Kühnel, L., Zeidler, H. and Kiefer, B.Simulation-supported characterisation of 3D-printed biodegradable structuresGAMM Mitteilungen; Vol. 44(4) 2021
Jerman, M., Krinke, S., Kühnel, L., Müller, M., Valentini, J. and Zeidler, H.Additive manufacturing using renewable materials: Concept of upcycling peach kernels for use in Binder Jetting and FFFProceedings of the 20th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2020, pp. 123-124 2020
Kühnel, L. and Zeidler, H.Characterisation and usability of powders from renewable raw materials for 3D printingProceedings of the 20th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2020, pp. 141-142 2020
Belitz, S., Todzy, T., Jäger, A. and Zeidler, H.Hybrid-additive manufacturing of tool components: Simulative design of the laser metal deposition process,Numerische auslegung des pulverbasierten laserauftragschweißprozesses: Hybrid-additive fertigung von WerkzeugkomponentenWT Werkstattstechnik Vol. 110(6), pp. 418-423 2020
Kranhold, C., Kröning, O., Schulze, H.-P., Herzig, M. and Zeidler, H.Investigation of stable boundary conditions for the Jet-electrolytic Plasma Polishing (Jet-ePP)Procedia CIRP; Vol. 95, pp. 987-992 2020
Kröning, O., Schulze, H.-P., Kranhold, C., Herzig, M. and Zeidler, H.Investigation of the ignition phase in electrolytic plasma polishing under different starting conditionsProcedia CIRP; Vol. 95, pp. 993-998 2020
Todaro, I., Squatrito, R., Essel, S. and Zeidler, H.Highly conductive aluminium metal matrix composites with carbon inserts obtained by casting processesMaterials Today: Proceedings; Vol. 10, pp. 277-287 2019
Tosello, G., Gulcur, M., Whiteside, B., Coates, P., Luca, A., De Sousa Lia Fook, P., Riemer, O., Danilov, I., Zanjani, M., Hackert-Oschätzchen, M., Schubert, A., Baruffi, F., Achour, S., Calaon, M., Nielsen, C., Bissacco, G., Cannella, E., Rasmussen, A., Bellotti, M., Saxena, K., Qian, J., Reynaerts, D., Santoso, T., Syam, W., Leach, R., Kose, S., Parenti, P., Annoni, M., Cai, Y., Luo, X., Qin, Y. and Zeidler, H.Micro product and process fingerprints for zero-defect net-shape micromanufacturingEuropean Society for Precision Engineering and Nanotechnology, Conference Proceedings - 19th International Conference and Exhibition, EUSPEN 2019, pp. 98-99 2019
Mwangi, J., Nguyen, L., Bui, V., Berger, T., Zeidler, H. and Schubert, A.Nitinol manufacturing and micromachining: A review of processes and their suitability in processing medical-grade nitinolJournal of Manufacturing Processes; Vol. 38, pp. 355-369 2019
Zeidler, H., Böttger-Hiller, F., Krinke, S., Parenti, P. and Annoni, M.Surface finish of additively manufactured parts using plasma electrolytic polishingEuropean Society for Precision Engineering and Nanotechnology, Conference Proceedings - 19th International Conference and Exhibition, EUSPEN 2019, pp. 228-229 2019
Reinhardt, F., Böttger-Hiller, F., Kranhold, C., Schulze, H.-P., Kröning, O., Zeidler, H. and Lampke, T.Surface modification for corrosion resistance of electrically conductive metal surfaces with plasma electrolytic polishingAIP Conference Proceedings; Vol. 2113 2019
Conner, B., Essel, S., Paul, S., Wertheim, R., Pasang, T., Butcher, D., Zeidler, H., Dahotre, N., Pande, S., Banerjee, R., Cuesta-Lopez, S., Babcsan, N. and Solomon, V.Technological Innovations in Metals EngineeringJOM; Vol. 71(2), pp. 651-654 2019
Zeidler, H., Klemm, D., Böttger-Hiller, F., Fritsch, S., Le Guen, M. and Singamneni, S.3D printing of biodegradable parts using renewable biobased materialsProcedia Manufacturing; Vol. 21, pp. 117-124 2018
Streb, F., Lampke, T., Lampke, T. and Zeidler, H.Novel materials for heat dissipation in semiconductor technologies( 77 ), pp. Online-Ressource School: Chemnitz, Chemnitz University of Technology 2018
Mwangi, J., Bui, V., Berger, T., Zeidler, H. and Schubert, A.RC - Generator circuit pulse analysis for micro-EDM of high aspect ratio nitinol boresEuropean Society for Precision Engineering and Nanotechnology, Conference Proceedings - 18th International Conference and Exhibition, EUSPEN 2018, pp. 407-408 2018
Rajput, A., Zeidler, H. and Schubert, A.Analysis of voltage and current during the Plasma electrolytic Polishing of stainless steelProceedings of the 17th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2017, pp. 193-194 2017
Zanjani, M., Zeidler, H., Martin, A. and Schubert, A.Application of laser scanning as a Pre-machining metrology technique in Jet-ECMProceedings of the 17th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2017, pp. 185-186 2017
Kühn, R., Berger, T., Prieske, M., Börner, R., Hackert-Oschätzchen, M., Zeidler, H. and Schubert, A.Deposition and micro electrical discharge machining of CVD-diamond layers incorporated with siliconAIP Conference Proceedings; Vol. 1896 2017
Mwangi, J., Zeidler, H., Berger, T. and Schubert, A.Influence of dielectric fluid and tool electrode choice on micro-EDMed nitinol surface integrityProceedings of the 17th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2017, pp. 301-302 2017
Edelmann, J., Albrecht, M., Zeidler, H., Gehde, M. and Schubert, A.Investigation of various graphene fillers for improving properties of thermoplastic polymersProceedings of the 17th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2017, pp. 133-134 2017
Katz-Demyanetz, A., Squatrito, R., Todaro, I., Essel, S., Zeidler, H. and Bamberger, M.Manufacturing of aluminium metal matrix cast composites with carbon based additives for thermal management applicationsMaterials Science Forum; Vol. 879, pp. 909-914 2017
Böttger-Hiller, F., Nestler, K., Adamitzki, W., Glowa, G. and Zeidler, H.Plasma-electrolytical polishing of copper and its alloys,Plasma-electrolytical polishing of copper and its alloysGalvanotechnik; Vol. 108(10), pp. 1990-1996 2017
Zinecker, M., Penzel, M., Zeidler, H. and Schubert, A.Combination of aluminium with carbon-based applications,Combination of aluminium with carbon-based insertsConstruction; Vol. 68(7-8), pp. IW4-IW6 2016
Streb, F., Zeidler, H., Penzel, M., Schubert, A. and Lampke, T.Evaluation of metal-matrix composites baseplates with anisotropic thermal conductivity insertsPCIM Europe 2016; International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management, pp. 976-983 2016
Zeidler, H., Nestler, K., Böttger-Hiller, F., Schubert, A., Previtali, B. and Demir, A.Finishing of laser-machined coronary stents by plasma electrolytic polishingProceedings of the 16th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2016 2016
Schubert, A., Hackert-Oschätzchen, M., Martin, A., Winkler, S., Kuhn, D., Meichsner, G., Zeidler, H. and Edelmann, J.Generation of Complex Surfaces by Superimposed Multi-dimensional Motion in Electrochemical MachiningProcedia CIRP; Vol. 42, pp. 384-389 2016
Clauß, B., Nestler, A., Zeidler, H., Schubert, A. and Rizzi, L.Generation of thermally effective surface structures by ultrasonic vibration assisted turningProceedings of the 16th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2016 2016
Schubert, A., Zeidler, H., Kühn, R., Hackert-Oschätzchen, M., Flemmig, S. and Treffkorn, N.Investigation of Ablation Behaviour in Micro-EDM of Nonconductive Ceramic Composites ATZ and Si3N4-TiNProcedia CIRP, Vol. 42, pp. 384-389 2016
Schulze, R., Jahn, S., Zeidler, H., Lindner, T. and Schubert, A.Multi material ultrasonic joining using microstructured joining partnersProceedings of the 16th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2016 2016
Nestler, K., Böttger-Hiller, F., Adamitzki, W., Glowa, G., Zeidler, H. and Schubert, A.Plasma Electrolytic Polishing - An Overview of Applied Technologies and Current Challenges to Extend the Polishable Material RangeProcedia CIRP; Vol. 42, pp. 503-507 2016
Böttger-Hiller, F., Nestler, K., Zeidler, H., Glowa, G. and Lampke, T.Plasma electrolytic polishing of metalised carbon fibresAIMS Materials Science; Vol. 3(1), pp. 260-269 2016
Streb, F., Ruhl, G., Schubert, A., Zeidler, H., Penzel, M., Flemmig, S., Todaro, I., Squatrito, R. and Lampke, T.Simulations and measurements of annealed pyrolytic graphite-metal composite baseplatesIOP Conference Series: Materials Science and Engineering; Vol. 118(1) 2016
Mwangi, J., Zeidler, H., Kühn, R. and Schubert, A.Suitability assessment of micro-EDM in machining Nitinol for medical applicationsProceedings of the 16th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2016 2016
Zeidler, H., Boettger-Hiller, F., Edelmann, J. and Schubert, A.Surface Finish Machining of Medical Parts Using Plasma Electrolytic PolishingProcedia CIRP; Vol. 49, pp. 83-87 2016
Schubert, A., Zeidler, H., Flemmig, S., Penzel, M., Krönert, M., Meichsner, G. and Essel, S.Challenge of machining aluminium matrix composites reinforced by diamondsProceedings of the 15th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2015, pp. 309-310 2015
Kröning, O., Herzig, M., Hackert-Oschätzchen, M., Kühn, R., Zeidler, H. and Schubert, A.Micro electrical discharge machining of tungsten carbide with UltraShort pulseKey Engineering Materials; Vol. 651-653, pp. 759-764 2015
Börner, R., Scholz, P., Kühn, R., Schubert, A., Zeidler, H. and Müller, R.Micro structuring of coated tools for dry sheet metal forming of aluminium alloysProceedings of the 15th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2015, pp. 85-86 2015
Klemm, D., Meyer, W., Glowa, G. and Zeidler, H.Utilisation of 3D printing for the production of packaging from recycled miscanthus straw, pp. online resource 2015
Quagliotti, D., Tosello, G., Islam, A., Hansen, H., Zeidler, H., Martin, A., Schubert, A., Brandao, C. and Riemer, O.Optical micro-metrology of structured surfaces micro-machined by jet-ECMProceedings of the 15th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2015, pp. 167-168 2015
Schubert, A., Zeidler, H., Martin, A., Hackert-Oschätzchen, M., Kempen, K. and Kruth, J.-P.Jet-Electrochemical machining of selective laser melted aluminium and steel alloys for micro injection mouldsConference Proceedings - 14th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 20142014
Zhang, R., Schubert, A. and Zeidler, H.Manufacturing of twist-free surfaces by start-stop-turning,Twist-free machining by start-stop-turningZWF Zeitschrift fuer Wirtschaftlichen Fabrikbetrieb; Vol. 109(12), pp. 889-894 2014
Nestler, K., Adamitzki, W., Glowa, G. and Zeidler, H.Plasma electrolytic surface treatment of copper and copper alloys,Plasma-electrolytische Oberflächenbehandlung von Kupfer und KupferlegierungenMetall; Vol. 68(11), pp. 73-93 2014
Kröning, O., Herzig, M., Schulze, H.-P., Hackert-Oschätzchen, M., Kühn, R., Zeidler, H. and Schubert, A.Resource-efficient machining of hard metalsKey Engineering Materials; Vol. 611-612, pp. 708-714 2014
Schubert, A., Zeidler, H., Flemmig, S. and Penzel, M.Simulation of the anisotropic thermal conductivity generated by graphene integration in aluminium matricesConference Proceedings - 14th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 20142014
Schubert, A., Zeidler, H., Jahn, S., Flemmig, S. and Schulze, R.Vibration analysis of an ultrasonic-assisted joining systemProcedia Engineering; Vol. 69, pp. 1021-1028 2014
Oschätzchen, M., Martin, A., Meichsner, G., Kowalick, M., Zeidler, H. and Schubert, A.Inverse jet electrochemical machining for functional edge shaping of micro boresProcedia CIRP; Vol. 6, pp. 378-383 2013
Schubert, A., Zeidler, H., Hahn, M., Hackert-Oschätzchen, M. and Schneider, J.Micro-EDM milling of electrically nonconducting zirconia ceramicsProcedia CIRP; Vol. 6, pp. 297-302 2013
Zeidler, H., Hahn, M., Schneider, J., Hackert-Oschätzchen, M. and Schubert, A.Accelerated precision manufacturing through electro discharge machining with ultrasonic vibration assistance29th DANUBlA-ADRIA Symposium on Advances in Experimental Mechanics, DAS 2012, pp. 56-57 2012
Hackert-Oschätzchen, M., Meichsner, G., Martin, A., Zeidler, H. and Schubert, A.Fast micromilling with jet electrochemical machining29th DANUBlA-ADRIA Symposium on Advances in Experimental Mechanics, DAS 2012, pp. 54-55 2012
Schubert, A., Meichsner, G., Hackert-Oschätzchen, M. and Zeidler, H.Functional edge shaping of micro bores by applying Electrochemical MachiningProceedings of the 12th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2012; Vol. 2, pp. 420-423 2012
Henning Zeidler, A.S.Vibration Assisted Micro Spark Erosion( Vol. 4 ), pp. 180 pp. 2012
Schubert, A., Zeidler, H., Wolf, N., Hackert-Oschätzchen, M. and Schneider, J.Ultrasonic-assisted micro-EDM of deep bores: Process and discharge analysisProceedings of the 12th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2012; Vol. 2, pp. 391-394 2012
Garn, R., Schubert, A. and Zeidler, H.Analysis of the effect of vibrations on the micro-EDM process at the workpiece surfacePrecision Engineering; Vol. 35(2), pp. 364-368 2011
Schubert, A., Wolf, N., Zeidler, H. and Schneider, J.Indirect approach to ultrasonic superposition in micro-EDMASME 2011 International Manufacturing Science and Engineering Conference, MSEC 2011; Vol. 1, pp. 427-434 2011
Schubert, A., Nestler, A., Pinternagel, S. and Zeidler, H.Influence of ultrasonic vibration assistance on the surface integrity in turning of the aluminium alloy AA2017Materialwissenschaft und Werkstofftechnik; Vol. 42(7), pp. 658-665 2011
Schubert, A., Wolf, N. and Zeidler, H.Micro - EDM: Process effects on the tool wear ratioProceedings of the 11th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2011; Vol. 2, pp. 546-549 2011
Schubert, A., Zeidler, H., Wolf, N. and Hackert, M.Micro electro discharge machining of electrically nonconductive ceramicsAIP Conference Proceedings; Vol. 1353, pp. 1303-1308 2011
Hackert-Oschätzchen, M., Meichsner, G., Zeidler, H., Zinecker, M. and Schubert, A.Micro machining of different steels with closed electrolytic free jetAIP Conference Proceedings; Vol. 1353, pp. 1337-1343 2011
Schubert, A. and Zeidler, H.Implementation of micro-EDM process for machining of nonconductive ceramics16th International Symposium on Electromachining, ISEM 2010, pp. 565-569 2010
Schubert, A., Edelmann, J., Gross, S., Zeidler, H., Meichsner, G., Hackert, M., Wolf, N. and Schneider, J.Micromanufacturing of hard to machine materials by physical and chemical ablation processesAIP Conference Proceedings; Vol. 1315, pp. 1279-1284 2010
Schubert, A. and Zeidler, H.Machining of nonconductive ZrO2 ceramics with micro-EDMProceedings of the 9th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2009; Vol. 2, pp. 6-9 2009
Schubert, A. and Zeidler, H.A novel approach to efficiency determination in micro electro discharge machiningProceedings of the 10th Anniversary International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2008; Vol. 2, pp. 488-492 2008
Leech, P. and Zeidler, H.Microrelief structures for anti-counterfeiting applicationsMicroelectronic Engineering; Vol. 65(4), pp. 439-446 2003
Leech, P. and Zeidler, H.Fabrication of micro-relief structures in thick resist for anti-counterfeiting applicationsMaterials Research Society Symposium - Proceedings; Vol. 741, pp. 73-78 2002