[1] J. Zhu, D. Zheng, M. Liu, G. Ma, J. Li, X. Zhang, X. Wei, O. Volkova, Thermodynamic Analysis of the Oxidation Behavior of Cerium in High-Speed Steel during Electroslag Remelting, Steel Research International 96 (2025) 2300824. https://doi.org/10.1002/srin.202300824.

[2] X. Yuan, Q. Wang, R. Wu, S. Sang, Y. Xu, X. Liang, L. Pan, B. Fan, Y. Li, R. Zhang, J. Li, O. Volkova, Environment-friendly Ca2+/Cr3+ co-doping LaAlO3 ceramics with excellent infrared radiation performance for energy-saving, Journal of Advanced Ceramics 14 (2025). https://doi.org/10.26599/JAC.2024.9221017.

[3] A. Yehorov, X. Wei, S. Mazepa, A. Sherstneva, O. Volkova, Oxidation Behavior of MgO-C Refractories Containing Metallic Aluminum, Calcium Magnesium Aluminate Aggregates, and Carbores P, Steel Research International 96 (2025) 2400260. https://doi.org/10.1002/srin.202400260.

[4] R. Wu, Q. Wang, X. Wang, L. Pan, S. Sang, Y. Liu, G. Wang, X. Liang, Y. Xu, Y. Li, J. Li, O. Volkova, High-entropy La(Al0.2Co0.2Fe0.2Ni0.2Cr0.2)O3−δ and La(Al0.2Co0.2Fe0.2Ni0.2Mn0.2)O3−δ ceramics with broad-band high emissivity for long-term energy-saving, Journal of Materials Science & Technology 234 (2025) 122–133. https://doi.org/10.1016/j.jmst.2024.12.104.

[5] M. Wendler, M. Hauser, C. Quitzke, O. Volkova, Effect of Austenite Reversion Treatment and Partitioning on the Phase Transformation Behavior and Mechanical Properties of Martensitic–Austenitic CrMnNi-Cast Steel, Steel Research International 96 (2025) 2400466. https://doi.org/10.1002/srin.202400466.

[6] X. Wei, A. Yehorov, O. Volkova, Corrosion of MgO–C Refractory with Ladle Slags, Steel Research International 96 (2025) 2400147. https://doi.org/10.1002/srin.202400147.

[7] X. Wei, A. Yehorov, M. Loeffler, Y. Korobeinikov, O. Fabrichnaya, S. Sridhar, O. Volkova, The interaction between Fe₂ O₃ ‐bearing molten slag and MgO‐C refractory containing calcium magnesium aluminate antioxidant, J Am Ceram Soc. 108 (2025) e70058. https://doi.org/10.1111/jace.70058.

[8] X. Wei, O. Volkova, Interactions between 3Al₂ O₃ ·2SiO₂ , CA₂ , CA₆ , and Molten Slags, Steel Research Int. 96 (2025) 2400536. https://doi.org/10.1002/srin.202400536.

[9] X. Wei, B. Fankhänel, W. Zhao, A. Perminov, E. Storti, M. Liu, G. Ma, O. Fabrichnaya, A. Charitos, O. Volkova, The wettability of pure liquid aluminum on oxide substrates, Journal of the American Ceramic Society 108 (2025) e20103. https://doi.org/10.1111/jace.20103.

[10] S. Wang, B. Li, B. Han, O. Volkova, D. Tan, Y. Wei, W. Yan, N. Li, Preparation of porous anorthite-spinel composite ceramics with spherical pores via direct foaming method: Role of fused magnesia as pore structure stabilizer, Ceramics International (2025). https://doi.org/10.1016/j.ceramint.2025.05.300.

[11] O. Volkova, N. Tinkova, R.I. Onaa, L. Neubert, K. Niziaiev, D. Zotov, Phosphorus Partition in an Industrial Basic Oxygen Furnace Process in Ukraine, Steel Research Int. 96 (2025) 2400693. https://doi.org/10.1002/srin.202400693.

[12] O. Voigt, M. Wendler, M. Güpner, C. Quitzke, M. Hauser, J. Bliedtner, H. Zeidler, O. Volkova, U.A. Peuker, Laser beam direct energy deposition coatings of blended high–carbon particles originating from recycled electro discharge machining waste of a H11 alloy, Surface and Coatings Technology 518 (2025) 132924. https://doi.org/10.1016/j.surfcoat.2025.132924.

[13] J. Song, W. Yan, O. Volkova, Q. Wang, M.R. Bellé, L. Neubert, S. Andrä, Wetting behavior and interfacial reactions of molten steel in contact with the Al2O3-MgAl2O4-C substrate: Effect of porous Al2O3-MgAl2O4 raw material, Journal of the European Ceramic Society (2025) 117988. https://doi.org/10.1016/j.jeurceramsoc.2025.117988.

[14] J. Song, W. Yan, O. Volkova, S. Andrä, M.R. Bellé, L. Neubert, C. Tian, Y. Li, Effect of microporous Al2O3–MgAl2O4 content on the thermal shock resistance and molten steel purification performance of β-SiC whisker-reinforced Al2O3–MgAl2O4–C ceramic filters, Journal of Materials Research and Technology 39 (2025) 7124–7137. https://doi.org/10.1016/j.jmrt.2025.11.087.

[15] A. Sherstneva, C. Quitzke, M.R. Bellé, M. Wendler, O. Volkova, Characterization of CrMnNi Steel Powders Obtained via Gas Atomization, Steel Research International 96 (2025) 2400267. https://doi.org/10.1002/srin.202400267.

[16] J. Richter, T. Wegener, F. Stredak, G. Bartzsch, S. Scherbring, J. Mola, O. Volkova, S. Böhm, T. Niendorf, On the Deformation Behavior of Metastable CrMnNi Steels Processed by Directed Energy Deposition in Different Temperature Regimes, Advanced Engineering Materials 27 (2025) 2500639. https://doi.org/10.1002/adem.202500639.

[17] L. Raami, M. Wendler, O. Volkova, P. Peura, The Effect of Bake Hardening on Quenched and Partitioned AISI 420 Stainless Steel, Steel Research International 96 (2025) 2400251. https://doi.org/10.1002/srin.202400251.

[18] C. Quitzke, M. Hauser, L. Krüger, O. Volkova, M. Wendler, Solidification of Tungsten Inert Gas–Welded Austenitic Stainless Steel with 0.17 wt% N, Steel Research International 96 (2025) 2400244. https://doi.org/10.1002/srin.202400244.

[19] A. Perminov, M.O. Ilatovskaia, X. Wei, S. Dudczig, O. Fabrichnaya, O. Volkova, Remelting of In Situ Fe-xTiC Metal Matrix Composites by the Sessile Drop Method: Characteristic Temperatures and Microstructural Analysis, Steel Research International 96 (2025) 2300872. https://doi.org/10.1002/srin.202300872.

[20] M.S. Paizullakhonov, S. Abduraimov, O. Kovtun, O. Volkova, S. Abduraimov, STUDY ON CHANGES IN PORE SIZE ON SINGLE POWDER AND REDUCTION SWELLING INDEX DURING THE REDUCTION OF IRON MILL SCALE WITH HYDROGEN AND FORMING GAS, HTM 29 (2025). https://doi.org/10.1615/HighTempMatProc.2024054324.

[21] P. Nitzsche, M. Hauser, A. Liehr, S. Henkel, M. Wendler, O. Volkova, T. Niendorf, H. Biermann, Influence of Different Notch Insertion Methods on the Fatigue Behavior of Metastable Cr‐Ni‐Cu‐N and AISI 316L Austenitic Stainless Steels, Fatigue Fract Eng Mat Struct 48 (2025) 3889–3906. https://doi.org/10.1111/ffe.70005.

[22] T. Nishi, S. Matsumoto, H. Yamano, K. Hayashi, R. Endo, M.R. Bellé, L. Neubert, O. Volkova, Density, Surface Tension, and Viscosity of Molten Ni-Based Superalloys Using the Maximum Bubble Pressure and Oscillating Crucible Methods, Steel Research International 96 (2025) 2300766. https://doi.org/10.1002/srin.202300766.

[23] Z. Ni, Z. Cheng, W. Jing, M. Wendler, O. Volkova, X. Zhang, J. Liu, Effects of Cu Content on Mechanical and Magnetic Properties of High-Strength Nonoriented Silicon Steel, Steel Research International 96 (2025) 2300865. https://doi.org/10.1002/srin.202300865.

[24] L. Neubert, O. Volkova, Vaporization of Vanadium Pentoxide from Iron and Steel-Making Slags, in: K. Forsberg, A. Karamalidis, T. Ouchi, G. Azimi, S. Alam, N.R. Neelameggham, A.A. Baba, H. Peng, H. Kim (Eds.), Rare Metal Technology 2025, Springer Nature Switzerland, Cham, 2025: pp. 117–124. https://doi.org/10.1007/978-3-031-81182-1_13.

[25] L. Neubert, T. Shyrokykh, N. Tinkova, S. Seetharaman, O. Volkova, Extraction of Vanadium from CaO–SiO₂ –MgO–Al₂ O₃ Slags Based on Vaporization of Vanadium Pentoxide, Steel Research Int. 96 (2025) 2300681. https://doi.org/10.1002/srin.202300681.

[26] L. Neubert, M.R. Bellé, A. Yehorov, A. Mospan, T.M.J. Stadtmüller, S. Sridhar, C.G. Aneziris, O. Volkova, Interactions between Molten High‐Silicon Electrical Steels and Carbon‐Bonded MgO Refractories Based on Recyclates, Adv Eng Mater (2025) e202502160. https://doi.org/10.1002/adem.202502160.

[27] L. Neubert, M.R. Bellé, T. Yamamoto, T. Nishi, H. Yamano, F. Ahrenhold, O. Volkova, Densities, Surface Tensions, and Viscosities of Molten High-Silicon Electrical Steels with Different Silicon Contents, Steel Research International 96 (2025) 2400237. https://doi.org/10.1002/srin.202400237.

[28] L. Neubert, M.R. Bellé, S. Seetharaman, O. Volkova, Effect of Oxygen on Thermophysical Properties of Molten High-Silicon Electrical Steels and Its Impact on Bubble Formation Behavior, Metall Mater Trans B 56 (2025) 3793–3802. https://doi.org/10.1007/s11663-025-03594-9.

[29] P. Liu, S. Cheng, X. Wei, Z. Liu, W. Zhao, O. Volkova, Numerical Simulation of Blast Furnace Hearth Maintenance Measures, Steel Research International 96 (2025) 2400337. https://doi.org/10.1002/srin.202400337.

[30] M. Levchenko, N. Tinkova, A. Yehorov, R. Endo, O. Volkova, Factors influencing slag viscosity measurements using the Concentric Cylinder Measuring System at high temperatures, Journal of Non-Crystalline Solids 666 (2025) 123647. https://doi.org/10.1016/j.jnoncrysol.2025.123647.

[31] M. Levchenko, H.P. Markus, M. Schreiner, M. Gräbner, O. Volkova, Reduction of Liquid Steelmaking Slag Using Hydrogen Gas as a Reductant, Metals 15 (2025) 984. https://doi.org/10.3390/met15090984.

[32] M. Levchenko, O. Kovtun, S.D. Patel, R. Endo, O. Volkova, Thermophysical Properties of CaO–SiO2–Al2O3–MgO–TiO2–FeOx–V2O3 Slag with CaO/SiO2 = 1.13 with Different TiO2 and V2O3 Additions, Steel Research International 96 (2025) 2300848. https://doi.org/10.1002/srin.202300848.

[33] M. Levchenko, O. Kovtun, S. Guhl, M. Gräbner, O. Volkova, Direct Reduction of Solid V₂ O₅ with Hydrogen at 600–1400 °C, Steel Research Int. 96 (2025) 2300705. https://doi.org/10.1002/srin.202300705.

[34] M. Levchenko, O. Kovtun, A. Angelini, H.P. Markus, D. Sosin, R. Endo, O. Volkova, Effect of SiO₂ and Al₂ O₃ on the Thermophysical Properties and the Foaming Index of Electric Arc Furnace Slag from the Production of Construction Steel, Steel Research Int. 96 (2025) 2400476. https://doi.org/10.1002/srin.202400476.

[35] S. Langenhan, M. Wendler, A. Weidner, M. Hauser, O. Volkova, H. Biermann, C. Burkhardt, In situ alloying of a CrMnNi steel via electron beam powder bed fusion process—microstructure and mechanical properties, Prog Addit Manuf (2025). https://doi.org/10.1007/s40964-025-01406-9.

[36] O. Kovtun, M. Levchenko, M.O. Ilatovskaia, C.G. Aneziris, O. Volkova, Results of Hydrogen Reduction of Iron Ore Pellets at Different Temperatures, Steel Research International 96 (2025) 2300707. https://doi.org/10.1002/srin.202300707.

[37] M. Hauser, M. Radajewski, H. Biermann, L. Krüger, O. Volkova, M. Wendler, Extraordinary Mechanical Properties of a Field-Assisted Sintering Technique/Spark Plasma Sintering Consolidated Stainless Steel with High Copper Content of 9 wt%, Steel Research International 96 (2025) 2400517. https://doi.org/10.1002/srin.202400517.

[38] J. Göthel, A. Franke, C. Hain, O. Volkova, Power‐to‐X Processes with Synthetic Iron Oxides, Steel Research Int. 96 (2025) 2400891. https://doi.org/10.1002/srin.202400891.

[39] J. Göthel, A. Corsten, O. Volkova, Evaluating the hydrogen supply chain so far—An assessment and review of critical aspects for an economy supported by a “hydrogen infrastructure,” Next Energy 9 (2025) 100448. https://doi.org/10.1016/j.nxener.2025.100448.

[40] J. Göthel, K.J. Burkmann, O. Volkova, Review and Evaluation of Ceramic-Stabilized Iron Oxides for Use as Energy Storage Based on Iron-Steam Process, Steel Research International 96 (2025) 2400265. https://doi.org/10.1002/srin.202400265.

[41] W. Chen, Z. Cheng, Q. Wen, M. Wendler, O. Volkova, J. Liu, High-Strength Nonoriented Electrical Steel with Excellent Magnetic Properties Accomplished by Cu–Ni Multialloying, Steel Research International 96 (2025) 2400254. https://doi.org/10.1002/srin.202400254.

[42] D. Chebykin, H. Ohta, R. Endo, O. Volkova, Methods for Thermal Conductivity and Thermal Diffusivity Measurements of Solid and Molten Mold Fluxes, Steel Research Int. 96 (2025) 2400524. https://doi.org/10.1002/srin.202400524.

[43] D. Chebykin, H.-P. Heller, K. Schulz, R. Endo, O. Volkova, Viscosity, Density, Surface Tension, and Crystallization Behavior of Commercial Mold Fluxes, Steel Research International 96 (2025) 2400103. https://doi.org/10.1002/srin.202400103.

[44] M.R. Bellé, A. Yehorov, D. Chebykin, D. Zotov, O. Volkova, Characterization of Thermophysical Properties and Crystallization Behavior of Industrial Mold Fluxes, Metals 15 (2025) 715. https://doi.org/10.3390/met15070715.

[45] M.R. Bellé, O. Volkova, Effect of Sulfur on the Surface Tension of Low-Sulfur Manganese-Boron Steel, in: Z. Peng, K.Y. Xie, M. Zhang, J. Li, B. Li, S.N. Monteiro, R. Soman, J.-Y. Hwang, Y.E. Kalay, J.P. Escobedo-Diaz, J.S. Carpenter, A.D. Brown, S. Ikhmayies (Eds.), Characterization of Minerals, Metals, and Materials 2025, Springer Nature Switzerland, Cham, 2025: pp. 155–165. https://doi.org/10.1007/978-3-031-80680-3_14.

[46] M.R. Bellé, A. Sherstneva, M. Hauser, M. Wendler, O. Volkova, Correlation between particle size, secondary dendrite arm spacing, and local cooling rate in gas-atomized stainless steel powders for additive manufacturing, Powder Technology 461 (2025) 121096. https://doi.org/10.1016/j.powtec.2025.121096.

[47] M.R. Bellé, L. Neubert, A. Yehorov, T.M.J. Stadtmüller, C.G. Aneziris, O. Volkova, Interaction between Molten Al‐Killed Mn–B Steel and Carbon‐Bonded MgO Refractories Based on Recyclates, Adv Eng Mater (2025) e202502360. https://doi.org/10.1002/adem.202502360.

[48] M.R. Bellé, L. Neubert, A. Sherstneva, T. Yamamoto, T. Nishi, H. Yamano, M. Weinberg, O. Volkova, Density, Surface Tension, and Viscosity of Liquid Low-Sulfur Manganese–Boron Steel via Maximum Bubble Pressure and Oscillating Crucible Methods, Steel Research International 96 (2025) 2400252. https://doi.org/10.1002/srin.202400252.

[49] G. Bartzsch, S. Scherbring, J. Richter, J. Mola, T. Niendorf, O. Volkova, Investigation of Sulfur Influence on the Atomization of Stainless Steels, Steel Research International 96 (2025) 2400263. https://doi.org/10.1002/srin.202400263.