Kirschner, Markus; R. Eckner, S. Guk, L. Krüger, R. Kawalla, U. Prahl: Deformation behavior of particle reinforced TRIP steel / Mg PSZ composite at hot working temperatures. Steel Research Int. (2018), DOI: 10.1002/srin.201800334
Darvishi Kamachali, Reza; Schwarze, Christian; Lin, Mingxuan; Diehl, Martin; Shanthraj, Pratheek; Prahl, Ulrich; Steinbach, Ingo; Raabe, Dierk: Numerical Benchmark of Phase-Field Simulations with Elastic Strains: Precipitation in the Presence of Chemo-Mechanical Coupling, Computational Materials Science, DOI: 10.1016/j.commatsci.2018.09.011
Kawalla, Rudolf; Stöcker, Anett; Prahl, Ulrich; Wei, Xuefei; Dierdorf, Jens; Hirt, Gerhard; Heller, Martin; Roggenbuck, Stefan; Korte-Kerzel, Sandra; Alois Weiss, Hannes; Tröber, Philipp; Böhm, Lucas; Volk, Wolfram; Leuning, Nora; Hameyer, Kay: Low-loss FeSi sheet for energy-efficient electrical drives, AIMS Materials Science, DOI: 10.3934/matersci.2018.6.1184
Li, Xiaoxiao; Ramazani, Ali; Prahl, Ulrich; Bleck, Wolfgang: Quantification of complex-phase steel microstructure by using combined EBSD and EPMA measurements, Materials Characterization, DOI: 10.1016/j.matchar.2018.05.038
Madivala, Manjunatha; Schwedt, Alexander; Prahl, Ulrich; Bleck, Wolfgang: Anisotropy and strain rate effects on the failure behavior of TWIP steel: A multiscale experimental study, International Journal of Plasticity, DOI: 10.1016/j.ijplas.2018.11.015
Madivala, Manjunatha; Schwedt, Alexander; Wong, Su Leen; Roters, Franz; Prahl, Ulrich; Bleck, Wolfgang: Temperature dependent strain hardening and fracture behavior of TWIP steel, International Journal of Plasticity, DOI: 10.1016/j.ijplas.2018.02.001
Motaman, A. H.; Komerla, K.; Storms, T.; Prahl, Ulrich; Brecher, C.; Bleck, W.: Experimental and numerical investigation of dual phase steels formability during laser-assisted hole-flanging, DOI: 10.1063/1.5034894
Qayyum, Faisal; Guk, Sergey; Kawalla, Rudolf; Prahl, Ulrich: Experimental Investigations and Multiscale Modeling to Study the Effect of Sulfur Content on Formability of 16MnCr5 Alloy Steel, steel research int. (steel research international), DOI: 10.1002/srin.201800369
Rautenstrauch, Anja; Luft, Johannes; Birnbaum, Peter; Baumann, Markus; Ullmann, M.; Kräusel, Verena; Landgrebe, Dirk; Kawalla, Rudolf; Prahl, Ulrich: Improving the formability of magnesium by cushion-ram-pulsation, MATEC Web Conf. (MATEC Web of Conferences), DOI: 10.1051/matecconf/201819012003
Santillana, Begoña; Paruchuri, Vamsi; Kripak, Viktor; Prahl, Ulrich; Horn, Carel ten: Assessment of Shell Strength During Solidification in the Mold Cracking Simulator (MCS) Test, Metallurgical and Materials Transactions A, DOI: 10.1007/s11661-018-4958-8
Schneider, Jürgen; Franke, Armin; Stöcker, Anett; Kawalla, Rudolf: Quantification of the effect of texture on the magnetization behavior, Journal of Electrical Engineering, S. 458-460, DOI: 10.2478/jee-2018-0074
Song, Wenwen; Prahl, Ulrich; Ma, Yan; Bleck, Wolfgang: Multiphase-Field Simulation of Cementite Precipitation during Isothermal Lower Bainitic Transformation, steel research int. (steel research international), DOI: 10.1002/srin.201800028
Bleck, W.; Brecher, C.; Herty, M.; Hirt, G.; Hopmann, C.; Klocke, F.; Borchmann, N.; Dierdorf, J.; Farivar, H.; Fayek, P.; Häck, A.; Kripak, V.; Krömer, M.; Laschet, G.; Prahl, Ulrich; Rüngeler, M.; Schmitz, G. J.; Spekowius, M.; Springer, P.; Teixeira, A. M.: Integrated computational materials and production engineering (ICMPE), Integrative Production Technology: Theory and Applications, DOI: 10.1007/978-3-319-47452-6\textunderscore
Farivar, H.; Richter, S.; Hans, M.; Schwedt, A.; Prahl, U.; Bleck, W. (2018): Experimental quantification of carbon gradients in martensite and its multi-scale effects in a DP steel. In: Materials Science and Engineering: A 718, S. 250–259. DOI: 10.1016/j.msea.2018.01.106.
Kawalla, Claudia; Teuber, Marie; Höck, Michael (2018): Empirical Examination of the Formation of Mechanical Properties of Heated Twin-Roll -Cast Magnesium Strips. In: Dmytro Orlov, Vineet Joshi, Kiran N. Solanki und Neale R. Neelameggham (Hg.): Magnesium Technology 2018. Cham: Springer International Publishing, S. 129–135.
Kawalla, R.; Hermann, Harti; Stöcker, A.; Schneider, J. (2018): Research & Development of Non-Oriented Electrical Steel at the Institute of Metal Forming Freiberg - Technologies for Optimized Properties. In: WMM'18. 8th International Conference on Magnetism and Metallurgy : Dresden, Germany, June 12th to 14th, 2018 : proceedings. Freiberg: Universitätsverlag, S. 1–19.
Kawalla, R.; Stöcker, A.; Prahl, U.; Wei, X.; Dierdorf, J.; Hirt, G. et al. (2018): Low-loss FeSi sheet for energy-efficient electrical drives. In: AIMS Materials Science 5 (6), S. 1184-1198. DOI: 10.3934/matersci.2018.6.1184. www.aimspress.com/article/10.3934/matersci.2018.6.1184
Leuning, N.; Steentjes, Simon; Stöcker, A.; Kawalla, R.; Wei, X.; Dierdorf, J. et al. (2018): Impact of the interaction of material production and mechanical processing on the magnetic properties of non-oriented electrical steel. In: AIP Advances 8 (4), S. 47601. DOI: 10.1063/1.4994143. https://doi.org/10.1063/1.4994143
Moses, Marie; Kawalla, Claudia; Kawalla, R.; Höck, Michael (2018): Development of an Innovative and Quality-Focused Production Technology for Magnesium Wire. In: MSF 918, S. 34–39. DOI: 10.4028 www.scientific.net/MSF.918.34.
Nam, Alexander; Prüfert, Uwe; Pietrzyk, Maciej; Kawalla, Rudolf (2018): Coil model for magnesium alloy strips and its heat transfer analysis. In: Procedia Manufacturing 15, S. 185–192. DOI: 10.1016/j.promfg.2018.07.193.
Nam, Alexander; Turdimatov, Murodjon; Kawalla, Rudolf; Prahl, Ulrich (2018): Inter-Pass Softening Behavior of Fe-16Cr- x Mn-4Ni-0.05C-0.17N Steel. In: Advanced Engineering Materials 39, S. 1371. DOI: 10.1002/adem.201800692.
Neh, Kristina; Ullmann, Madlen; Kawalla, R. (2018): Mechanical Properties and Microstructure of the Magnesium Alloy Mg-6.8Y-2.5Zn-0.5Al Produced by Casting and Hot Rolling. In: MSF 918, S. 3–12. DOI: 10.4028 www.scientific.net/MSF.918.3.
Orlov, Dmytro; Joshi, Vineet; Solanki, Kiran N.; Neelameggham, Neale R. (Hg.) (2018): Magnesium Technology 2018. Cham: Springer International Publishing.
Schneider, J.; Stöcker, A.; Franke, A.; Kawalla, R. (2018): Effects by the microstructure after hot and cold rolling on the texture and grain size after final annealing of ferritic non-oriented FeSi electrical steel. In: AIP Advances 8 (4), S. 47606. DOI: 10.1063/1.4993526.
Song, Wenwen; Prahl, Ulrich; Ma, Yan; Bleck, Wolfgang (2018): Multiphase-Field Simulation of Cementite Precipitation during Isothermal Lower Bainitic Transformation. In: steel research int. 21, S. 1800028. DOI: 10.1002/srin.201800028.
Springer, P.; Prahl, U. (2018): Pinning effect of strain induced Nb(C,N) on case hardening steel under warm forging conditions. In: Journal of Materials Processing Technology 253, S. 121–133. DOI: 10.1016/j.jmatprotec.2017.11.008.
Technische Universität Bergakademie Freiberg (2018): WMM'18. 8th International Conference on Magnetism and Metallurgy : Dresden, Germany, June 12th to 14th, 2018 : proceedings. Freiberg: Universitätsverlag.
Wemme, H.; Moses, M.; Oswald, M.; Ullmann, M.; Kawalla, R.; Prahl, U. (2018): Anwendung des innovativen Gießwalzverfahrens zur wirtschaftlichen Herstellung von Magnesium-Langprodukten. In: Tagungsband 10. Ranshofener Leichtmetalltage.
Wemme, Heike; Krbetschek, Christina; Ullmann, Madlen; Freigang, Anna; Plach, Stefan; Kawalla, R. (2018): Determination of the Hot Cracking Tendency of a Twin-Roll Cast AZ31 Magnesium Alloy by Means of Gleeble Tests. In: MSF 918, S. 40–47. DOI: 10.4028 www.scientific.net/MSF.918.40