Presentations, 6 March 2026 

“Crushing and screening – producing,
characterising, drying, separating and recycling products”

• Welcome address by Dr Falk Silbermann

  • Deputy Chair of the Friends and Supporters’ Association of the Institute for
    Processing Machines and Recycling Systems Technology

     

• Welcome address by Prof. Dr Holger Lieberwirth

  • Freiberg University of Mining and Technology (TU Bergakademie Freiberg), Institute for Processing Machines and Recycling Systems Technology
     

• The maintenance requirements of motorways and their impact on material flows
  of mineral materials (to be confirmed)

  • Dr Hendrik Gaitzsch, Autobahn GmbH des Bundes

     

• Slag processing – diverse feed materials – bespoke solutions

  • Dr Jens Löwe, SBM Mineral Processing GmbH

     

• Innovative recycling technologies: Sustainable solutions in the field of mecha-
  nical slag processing

  • Dr Jan Lampke, Haver Engineering GmbH

  • Dr Metodi Zlatev, Haver Niagara GmbH

     

• Research findings on the processing of LD slag from voestalpine AG

  • Assoc. Prof. Dipl.-Ing. Dr.mont. Andreas Böhm, Montanuniversität Leoben,
    Chair of Mineral Processing and Refining

     

• From waste to resource: Recycling and zero-waste plants in the metallurgical
  industry

  • Mr Fabian Horbert, Köppern Aufbereitungstechnik GmbH

     

• Metallurgical slag – What happens after crushing?

  • Mr Karsten Pollok, HAZEMAG Systems GmbH

     

• Scrap processing in a ball mill

  • Ms Nadine Fischedick, JÖST GmbH

     

• Slag crushing – challenges and solutions

  • Dr Falk Silbermann, Metso Germany GmbH

     

• Dynamic flow chart simulation of a processing plant

  • Mr Philipp Niebel, TU Bergakademie Freiberg,
    Institute for Processing Machines and Recycling Systems Technology

     

• Digital Twin Modelling of Industrial Systems: A comparative study of deterministic
  approaches using neural networks to estimate mass throughput

  • Mr Julius Ortmanns, Köppern Entwicklungs-GmbH

     

• Highly optimised dust extraction filters for processing technology and related
  sectors

  • Mr Matthias Leeke, AML Anlagentechnik GmbH

    
     

Presentations 8 March 2024 

Crushing and classification – producing, characterising, drying, separating and recycling products

• Welcome address by Mr Dipl.-Kfm. F. Festge

  • Haver & Boecker OHG, Oelde
  • Chairman of the Friends and Supporters’ Association of the Institute for Processing Machines and Recycling Systems Technology

• Welcome address by Prof. Dr.-Ing. H. Lieberwirth

  • Freiberg University of Mining and Technology (TU Bergakademie Freiberg), Institute for Processing Machines and Recycling Systems Technology

• The gyratory crusher as a ‘smart sensor’ – Process monitoring through anomaly detection

  • Dr Falk Silbermann, FLSmidth Mining Technologies GmbH

• Technical solutions for the separation and dewatering of clayey components from processing water in sand and gravel open-cast mines

  • Mr Ferdinand Doppstadt, LIG GmbH

     

• AI for circuit control in mineral processing plants

  • Mr Johannes Müller, TU Bergakademie Freiberg, Institute for Processing Machines and Recycling Systems Technology

• Use of AI methods for intelligent and autonomous grinding

  • Mr Rupert Kirchner, CEMTEC Cement and Mining Technology GmbH

• Wear measurement on crushing units

  • Mr Julius Ortmanns, Köppern Entwicklungs-GmbH

• Recycling of plasterboard

  • Mr Steffen Hinderer, BHS-Sonthofen GmbH

• Recycling of gypsum-containing construction waste – experiences from nearly 10 years of operation

  • Mr Jörg-Michael Bunzel, MUEG Mitteldeutsche Umwelt- und Entsorgung GmbH

• Improving the recycling of construction and demolition waste: Use of AI-based process control and automated quality management via sensor-based in-line monitoring of particle size distributions

  • Ms Lieve Göbbels1 , Mr Nils Kroell1 , Ms Karoline Raulf1 , Mr Steffen Häberle2 , Mr Jesko Merkel3 , Mr Jason Rambach4 1 RWTH Aachen University, Institute for Anthropogenic Material Cycles, 2 Kleemann GmbH, 3 Point 8 GmbH, 4 German Research Centre for Artificial Intelligence GmbH

• Komarek – small compaction/granulation machines for mineral materials

  • Mr Adrian Thamm, Köppern Aufbereitungstechnik GmbH

• Implementation and recommissioning of the low-voltage switchgear container, including PLC retrofit, visualisation and CAD at SKBB’s Hartmannsdorf plant

  • Dr Jörn Matschke, Actemium BEA GmbH

• Opportunities, costs and CO₂ reduction through transparency and plant optimisation

  • Mr Lothar Duve, Mitec Gesellschaft für Mechanical Engineering und Industrietechnik mbH

• Modern solutions in screening technology – The new generation ‘NIAGARA-T-Class’

  • Mr Klaus Fennenkötter, HAVER NIAGARA GmbH

• Processing of secondary raw materials with integrated process water treatment, using the example of construction and demolition waste recycling

  • Mr Sebastian Kemper, WIMA Wilsdruffer Maschinen- und Anlagenbau GmbH

• Wet processing, including water treatment, of a sand/gravel mixture to produce concrete aggregate using mobile technology

  • Mr Gustav Beck, WIRTGEN DEUTSCHLAND Vertriebs- und Service GmbH

Presentations 3 March 2023 - 

Crushing and classification – producing, characterising, drying, separating and recycling products

• Welcome address by Mr F. Festge, Dipl.-Kfm.

  • Haver & Boecker OHG, Oelde
  • Chairman of the Friends and Supporters’ Association of the Institute for Processing Machines and Recycling Systems Technology

• Welcome address by Prof. Dr.-Ing. H. Lieberwirth

  • Freiberg University of Mining and Technology, Institute for Processing Machines and Recycling Systems Technology

• Plenary lecture: Calcined clays from gravel and sand deposits for cement

  • Dr Simone Schulze, VDZ Technology gGmbH

• Technical solutions for the separation and dewatering of clayey components from processing water in sand and gravel open-cast mines

  • Mr Ferdinand Doppstadt, LIG GmbH

     

• Challenges and advances in the mineralogical analysis of raw and residual materials containing clay minerals

  • Dr Reinhard Kleeberg, Freiberg University of Mining and Technology, Institute of Mineralogy

• Clay calcination – from research to practice

  • Dr Martin Reformat, Loesche GmbH

• Compaction machines in concrete recycling: applications and operational experience

  • Mr Thomas Neumann, allmineral Aufbereitungstechnik GmbH

• Let’s keep the planet blue – practical examples from the recycling of slag, dust and sludge

  • Dr Jan Lampke, Mr Benjamin Gurra, Haver Niagara GmbH

• SMART. SAFE. SUSTAINABLE. – How digital products are transforming mobile processing technology

  • Mr Tobias Böckle, Kleemann GmbH

• Digital system development in processing technology – Virtual behaviour analysis using the RM Active Grid® case study

  • Dr Eric Fimbinger¹, Mr Philipp Falkner², Prof. Dr Helmut Flachberger^{1
    1} Montanuniversität Leoben, Chair of Mineral Processing and Refining
    ² RM RUBBLE MASTER HMH GmbH

• Development of an automated control strategy for rotor impact mills

  • Mr Moritz Pultke, BHS-Sonthofen GmbH

• Bulk material tracking and process modelling of a continuous belt conveyor system with mixing and storage areas - Quality management of the overall system using the example of a hard coal mine in Kazakhstan

  • Dr Jörn Matschke, Mr Karsten Kochte, Actemium BEA GmbH

• DEM simulation of crushing processes in sieves using the TAKRAF Breakage Model (TBM)

  • Dr Marko Schmidt, TAKRAF GmbH

• Different requirements for processing machinery in the ‘Mining’ and ‘Construction’ sectors, using screening machines as an example

  • Mr Andreas Kanter, Metso Outotec Germany GmbH

• Energy savings through dry grinding using roller mills

  • Mr Marcel Pfeifer, Dr Felix Heinicke, Köppern Aufbereitungstechnik GmbH

Presentations 4 March 2022 – Web conference

Grinding and classification – producing, characterising, drying, separating and recycling products

• Welcome address by Mr F. Festge, Dipl.-Kfm.

  • Haver & Boecker OHG, Oelde
  • Chair of the Friends and Supporters’ Association of the Institute for Mineral Processing Machinery

• Welcome address by Prof. Dr.-Ing. H. Lieberwirth

  • Freiberg University of Mining and Technology, Institute for Mineral Processing Machinery

• Plenary lecture: MissionZero – Innovations in Tailings Management: a case study

  • Mr T. Jabs
    FLSmidth GmbH, Wiesbaden

• Dewatering and operational experience with disc and cascade classifiers in the production of 0/4 sand

  • Dr J. Löwe
    SBM Mineral Processing GmbH, Oberweis

     

• Construction of a new processing plant for quartz sand and kaolin at the Schnaittenbach site – Design, special features and operational experience

  • Dr S. Huber
    Amberger Kaolinwerke Eduard Kick GmbH, Hirschau

• New developments in sensor-based sorting of building materials

  • Prof. Dr H. Wotruba
    RWTH Aachen, Department of Mineral Processing

• Modern overload systems for crushing plants and their benefits for the cost-effective processing of natural rocks and mineral construction waste

  • Mr D. Kalt
    Kleemann GmbH, Göppingen

• Cement production: Current challenges and solutions

  • Dr M. Reichert
    Loesche GmbH, Düsseldorf

• Grinding and drying in hammer mills

  • Mr T. Schlüter
    HAZEMAG Systems GmbH, Düsseldorf

• Processing of mineral composites

  • Mr R. Sperberg
    Gebr. Jehmlich GmbH, Nossen

• Connecting comminution and classification technologies to the Internet of Things – advantages, methods and challenges

  • Dr V. Huhn
    RHEWUM GmbH, Remscheid

• Analysis of operational data, error messages and information on maintenance procedures for technologies in the aggregates and minerals sector

  • Mr A. Dittrich, Mr F. Bartsch
    Linda
    Gicon GmbH, Dresden

• Dynamic simulation of a processing plant using new open-source software

  • Dr A. Gladky
    Freiberg University of Mining and Technology, Institute for Processing Machines and Recycling Systems Technology

Presentations 5 March 2021

Crushing and classification – producing, characterising, drying, separating and recycling products

• Welcome address by Mr F. Festge, Dipl.-Kfm.

  • Haver & Boecker OHG, Oelde
  • Chair of the Friends and Supporters’ Association of the Institute for Mineral Processing Machinery

• Welcome address by Prof. Dr.-Ing. H. Lieberwirth

  • Freiberg University of Mining and Technology, Institute for Mineral Processing Machinery

• New opportunities through Industry 4.0 and industrial intelligence in factory and plant design

  • Mr J. Soder
    SEW-EURODRIVE GmbH & Co. KG, Bruchsal

• Machine-learning-based process state monitoring using the example of an impact crusher

  • Mr S. Lange
    Freiberg University of Mining and Technology, Institute for Processing Machines and Recycling Systems Technology

   

• Digitalisation in mineral processing – from data analysis via the intelligent machine to the conductor of value creation

  • Mr L. Gillenkirch
    HAVER NIAGARA GmbH, Münster

     

• Goovi: A new approach to screening and classification

  • Dr F. Silbermann
    thyssenkrupp Industrial Solutions AG, Beckum

     

• Implications of the future EN 1009 standard for manufacturers and operators of processing machinery

  • Mr A. Kanter
    Metso Germany GmbH, Mannheim

     

• Contribution to the recycling of manganese slag through mechanical processing

  • Mr A. Bravo, Ms C. Carvajal, Dr O. Popov, Prof. Dr H. Lieberwirth
    Freiberg University of Mining and Technology, Institute for Processing Machines and Recycling Systems Technology

&n

• Applicability of comminution models for process modelling of potash salt granulation

  • Mr P. Schönfeld, Prof. Dr H. Lieberwirth, Dr F. Heinicke
    Freiberg University of Mining and Technology (TU Bergakademie Freiberg), Institute for Processing Machines and Recycling Systems Technology
    Köppern Aufbereitungstechnik GmbH, Freiberg

     

• Efficient classification in deflector screens

  • Dr D.-C. Karhoff, Mr F. Mertens, Mr M. Giersemehl
    NEUMAN & ESSER Process Technology GmbH, Übach-Palenberg

• Regeneration of green sand – conserving resources and reducing landfill requirements

  • Dr M. Weider, Dr K. Meltke
    TU Bergakademie Freiberg, Foundry Institute
    TU Bergakademie Freiberg, Institute for Processing Machines and Recycling Systems Technology

Presentations 5–6 March 2020

Crushing and classification – producing, characterising, drying, separating and recycling products

• Welcome address by Mr F. Festge, Dipl.-Kfm.

  • Haver & Boecker OHG, Oelde
  • Chair of the Friends and Supporters’ Association of the Institute for Mineral Processing Machinery

• Welcome address by Prof. Dr.-Ing. H. Lieberwirth

  • Freiberg University of Mining and Technology, Institute for Mineral Processing Machinery

• The 4th Berggeschrey – Raw Material Extraction in Germany: Opportunity or Threat?

  • Dr M. Roscher, Saxore Bergbau GmbH, Freiberg

     

• Advantages and limitations of mobile processing plants from the perspective of an aggregate producer

  • Dr C. Bilger, bilger+partner AG, Altdorf

     

• Semi-mobile plants for the production and processing of sand and grit fractions

  • Dr J. Löwe, SBM Mineral Processing GmbH, Oberweis

     

     

• Problems in the processing of carbon concrete

  • Dr H.-G. Jäckel/Dr T. Krampitz TU Bergakademie Freiberg, Institute for Mineral Processing Machinery

     

     

• Systematic investigations into a profiled double-roll crusher

  • Mr P. Thiere/Dr F. Silbermann, Freiberg thyssenkrupp Industrial Solutions AG, Beckum

     

• Simulation of crushing in an impact crusher using ROCKY DEM

  • Mr Z. Xu, Freiberg

• Wear investigations – Discrepancies between theory and practice in mechanical process engineering

  • Mr D. Knauer/Dr S. Sander HOSOKAWA Alpine AG, Augsburg

• New ways of extending the service life of mining and construction machinery through the use of highly wear-resistant materials

  • Dr M. Herrmann/Dr J. Pötschke Fraunhofer Institute for Ceramic Technologies and Systems IKTS, Dresden

     

• Particle size analysis of aggregate

  • Dr K. Meltke, TU Bergakademie Freiberg, Institute for Mineral Processing Machinery

Presentations 7–8 March 2019

Grinding and classification – producing, characterising, drying, separating and recycling products

• Welcome address by Mr F. Festge, Dipl.-Kfm.

  • Haver & Boecker OHG, Oelde
  • Chair of the Friends and Supporters’ Association of the Institute for Mineral Processing Machinery

• Welcome address by Prof. Dr.-Ing. H. Lieberwirth

  • Freiberg University of Mining and Technology, Institute for Mineral Processing Machinery

• Construction sites on public roads – possibilities and limitations for speeding up works

  • Ms D. Drescher, President of LASuV, Dresden

• Mobile processing replaces stationary plants – practical examples

  • Ms A. Haufe, Kleemann GmbH, Göppingen

     

• Flexible processing plant for the production of high-quality aggregates from raw materials of primary and secondary origin

  • Mr H. Pernkopf, SBM Mineral Processing GmbH, Oberweis

     

• Challenges in material-specific and  customer-specific design of grinding plants with fine impact mills

  • Dr S. Jäckel/Mr R. Sperberg, Gebr. Jehmlich GmbH, Nossen

• Grinding circuits with well-bed roller mills

  • Dr F. Heinicke, Köppern Aufbereitungstechnik GmbH, Freiberg / Mr R. Kühnel, TU Bergakademie Freiberg, Institute for Mineral Processing Machinery
     

   

• Development of a guide ring classifier

  • Dr D. C. Karhoff / Mr F. Mertens / Mr M. Giersemehl, Neuman & Esser Process Technology GmbH, Übach-Palenberg

• Use of eccentric screening machines on trains for track ballast processing

  • Dr R. Heinrich, Haver & Boecker OHG, Oelde / Mr R. Hauke, Plasser & Theurer GmbH, Linz

• Processing and use of desert sand for concrete production

  • Dr J. Lampke, Haver Engineering GmbH, Freiberg

     

Presentations 1–2 March 2018

Crushing and classification – producing, characterising, drying, separating and recycling products

• Welcome address by Mr F. Festge, Dipl.-Kfm.

  • Haver & Boecker OHG, Oelde

  • Chair of the Friends and Supporters’ Association of the Institute for Mineral Processing Machinery

     

• Welcome address by Prof. Dr.-Ing. H. Lieberwirth

  • Freiberg University of Mining and Technology, Institute for Mineral Processing Machinery

    
     

• Plenary lecture: The Zinnwald Lithium Project of Deutsche Lithium GmbH – Development and Current Status

  • Prof. Dr A. Müller, 

    
     

• Financial legacy costs of mining in Saxony – Part 2

  • Prof. Dr.-Ing. G. Unland

     

• Reduction of vibrations in steel structures through a new low-vibration jaw crusher

  • Dr F. Silbermann, ThyssenKrupp Industrial Solutions AG, Beckum

    
     

• True milestones are rare – Metso’s new MX4 gyratory crusher

  • Mr H. van Benthem, Metso Germany GmbH, Düsseldorf

    
     

• Optimisation of process plants using the ‘NIAflow’ simulation software

  • Dr R. Heinrich, Haver & Boecker OHG, Oelde
     

     

• Global market requirements for mobile processing technology – material flow control and overload systems

  • Mr J. Meier, Kleemann GmbH, Göppingen

    
     

• Implementation of a concept for selective crushing of Jurassic limestone

  • Mr F. Eichhorn, Max Bögl Stiftung KG, Elterlein

     

• Investigations into the suitability of selected waste materials for the brick industry

  • Dr J. Friedrich / Ms L. Kühnel, TU Bergakademie Freiberg, Institute for Mineral Processing Machinery

     

• Crushing technology investigations using iron ore on a pilot roller mill

  • Dr M. Reichert, LOESCHE GmbH, Düsseldorf

    
     

• Pioneering redesign of the measurement technology for a laboratory impact crusher

  • Mr S. Lange, TU Bergakademie Freiberg, Institute for Mineral Processing Machinery

Presentations 2–3 March 2017

Crushing and classification – producing, characterising, drying, separating and recycling products

• Welcome address by Mr F. Festge, Dipl.-Kfm.

  • Haver & Boecker OHG, Oelde

  • Chair of the Friends and Supporters’ Association of the Institute for Mineral Processing Machinery

     

  • Welcome address by Prof. Dr.-Ing. H. Lieberwirth

    • TU Bergakademie Freiberg, Institute for Mineral Processing Machinery

      
       

    • Plenary lecture by Prof. Dr K.-D. Barbknecht

      • Rector of the TU Bergakademie Freiberg

        
         

    • Financial legacy costs of mining in Saxony

      • Prof. Dr.-Ing. G. Unland, Saxon Minister of State for Finance

       

    • New primary crusher as an alternative to gyratory or jaw crushers

      • Dr F. Silbermann, ThyssenKrupp Industrial Solutions AG, Beckum

        
         

    • TAKRAF sizers and roller crushers – design and operational experience

      • Dr M. Schmidt, TAKRAF GmbH, Lauchhammer

        
         

    • Fundamental investigations into fracture behaviour in smooth-roll crushers

      • Mr P. Hillmann / Mr M. Klichowicz, TU Bergakademie Freiberg, Institute for Mineral Processing Machinery

        
         

    • Yield optimisation in screen classifiers – solutions for extreme problems

      • Dr M. Zlatev, HAVER NIAGARA GmbH, Münster

        
         

    • BHS Combimix System – Processing of contaminated and clay-laden rock

      • Mr M. Immler, BHS-Sonthofen GmbH, Sonthofen

        
         

    • Mechanical vertical conveying with bucket elevators – selection criteria and latest developments

      • Mr R. Furthmann, AUMUND Fördertechnik GmbH, Rheinberg

         

    • Determining mass flow using scales – possibilities, limitations, sources of error

      • Mr U. Flaumann, Janner Waagen GmbH, Weiden

        
         

    • Use of fluidised-bed roller mills to increase the specific surface area of iron ore concentrates for pelletisation

      • Dr H. Günter / Dr F. Heinicke, Köppern Aufbereitungstechnik GmbH, Freiberg

Presentations 3–4 March 2016

Crushing and classification – producing, characterising, drying, separating and recycling products

  Lieberwirth

• Freiberg University of Mining and Technology, Institute for Mineral Processing Machinery

  
   

Presentations 5–6 March 2015

Crushing and classification – producing, characterising, drying, separating and recycling products

Welcome address by Prof. Dr.-Ing. H. Lieberwirth

• Freiberg University of Mining and Technology, Institute for Mineral Processing Machinery

   

Presentations 6–7 March 2014

Crushing and screening – producing, characterising, drying, separating and recycling products

Welcome address by Prof. Dr.-Ing. H. Lieberwirth

• Freiberg University of Mining and Technology, Institute for Mineral Processing Machinery
  
   

Presentations 7–8 March 2013

Crushing and classification – producing, characterising, drying, separating and recycling products

Welcome address by Prof. Dr.-Ing. H. Lieberwirth

• Freiberg University of Mining and Technology, Institute for Mineral Processing Machinery
  
   

Presentations 8–9 March 2012

Crushing and screening – producing, characterising, drying, separating and recycling products

Welcome address by Dr K. Meltke

• Institute for Mineral Processing Machinery
  
   

Presentations 24–26 February 2011

Crushing and screening – producing, characterising, drying, separating and recycling products

• Welcome address by Dr Kemmann

  • Chairman of the Construction and Building Materials Machinery Association within the VDMA

     

• Welcome address by Dr K. Meltke

  • Institute for Processing Machinery

     

• VSI crushers for the production of sand and fine sand

  • Mr Guldan, BHS-Sonthofen GmbH

     

• Selective impact crushing processes for the production of high-grade hard stone chippings from Quaternary Alpine advance gravels

  • Mr Müller, Gravel, Asphalt and Ready-Mix Concrete Plant Oberland Rolf Strohmaier GmbH, Huglfing

     

• Grinding and drying with hammer mills

  • Mr Kintrup, HAZEMAG & EPR GmbH, Dülmen

     

• Extraction and processing of raw magnesite from waste rock

  • Mr Uebler, Jöst GmbH & Co.KG, Dülmen

  • Mr Papagiorgiou, Grecian Magnesite S.A., Greece

     

• A mobile coal grinding plant – for asphalt mixing plants, amongst other applications

  • Mr Authenrieth, Loesche GmbH, Düsseldorf

     

• Investigations into the de-clogging of a gravel and chippings plant with varying processing techniques

  • Mr Schmiedel, Breitenauer Grauwacke GmbH & Co.KG, Oederan

     

• Information on the CLP Regulation 1272/2008/EC (Assessment of the respirable quartz content in fillers, crushed sand, etc.)

  • Dr K. Meltke, TU Bergakademie Freiberg

     

  • Agglomeration of mineral fine dust

    • Ms Weyrauch, Haver Engineering GmbH, Meissen

       

  • Fine grinding of material layers prepared outside the stress zone in an arrangement of horizontally mounted rollers

    • Dr Feige, Roßlau

       

  • Laudation for Mr Donald A. Longhurst

    • Professor Dr.-Ing. G. Unland, Saxon Minister of State for Finance

       

  • Finish Grinding Volume & Mass Flow, A New Metric for Diagnostics & Optimisation

    • Mr Longhurst, Polysius Corporation, Atlanta / USA

Presentations 4–6 March 2010

Theory and practice of crushing and screening

• Welcome address by Dr Kemmann

  • Chairman of the Construction and Building Materials Machinery Association within the VDMA

     

• Welcome address by Dr Folgner

  • Managing Director of the Institute for Processing Machinery

     

• The influence of particle shape on impact crushing

  • Prof. Dr.-Ing. G. Unland, Saxon Minister of State for Finance

     

• The influence of rock on crushing under impact and compressive stress

  • Dr Folgner, TU Bergakademie Freiberg

     

• Fundamentals of the design of impact rotors for impact crushers

  • Mr Lippert, TU Bergakademie Freiberg

     

• Common errors in the design and operation of impact crushers

  • Dr J. Löwe, SBM Mineral Processing Germany GmbH, Bochum

     

• New approaches to calculating product particle size distribution and throughput when using gyratory crushers

  • Dr F. Silbermann, ThyssenKrupp Fördertechnik GmbH, Ennigerloh

     

• The interaction between the properties of the feed mass flow, the screen lining design and the operating conditions on product quality during screen classification

  • Mr Würzner, Lengefeld

     

• Design of a secondary screening plant in a granite quarry

  • Mr Uebler, Jöst GmbH & Co.KG, Dülmen

     

• Serial classification of grain mixtures for grain shape sorting

  • Mr Andrä, Freiberg University of Mining and Technology
  • Mr Steuer, CHOREN Industries GmbH, Freiberg

Presentations 5 March 2009

Mobile, semi-mobile and stationary processing plants in the aggregates industry

• Welcome address by Dr Kemmann

  • Chairman of the Construction and Building Materials Machinery Association within the VDMA

     

• Welcome and information on Bachelor’s/Master’s degree programmes at the TU Bergakademie Freiberg by Dr Folgner

  • Managing Director of the Institute for Processing Machinery

     

• Plenary lecture by the Saxon Minister of State for Finance, Prof. Dr.-Ing. G. Unland

   

• Mobile, semi-mobile and stationary processing plants – current status and outlook

  • Dr Folgner, TU Bergakademie Freiberg

     

• Interlinked crawler-mounted crushing and screening plants

  • Mr Wörner, Kleemann GmbH, Göppingen

     

• Mobile primary crushers in combination with stationary processing plants

  • Mr Zeipert, Basalt AG, Großkoschen

     

• Experience in the design of processing plants for hard rock from the perspective of a raw materials producer

  • Mr Eichhorn, Max Bögl Roh- und Baustoffe GmbH & Co.KG, Elterlein

     

• Use of a mobile pre-screening plant with a heavy eccentric screening machine in natural stone quarrying

  • Mr Scharf, Haver & Boecker OHG, Maschinenfabrik Münster

  • Mr Glaser, Hermann Wegener GmbH & Co.KG, Adelebsen

     

• Euromix concrete mixing plants – the system solution for mobile concrete production

  • Dr J. Löwe, SBM Mineral Processing Germany GmbH, Bochum

     

• Processing of metal-bearing slag

  • Dr Jäckel, TU Bergakademie Freiberg
  • Dr Schicht, BHS Sonthofen GmbH

Presentations 6–8 March 2008

From raw materials to cement

• Welcome address by Dr Kemmann

  • Chairman of the Construction and Building Materials Machinery Association within the VDMA

     

  • Welcome address by Prof. Dr.-Ing. G. Unland

    • Rector of the TU Bergakademie Freiberg

       

  • Optimised crusher selection in the cement industry

    • Mr Ewald, ThyssenKrupp Fördertechnik GmbH

       

  • Modern primary crushing plants for the cement industry

    • Mr Dardemann, HAZEMAG & EPR Dülmen

       

  • Pre-crushing plant in Tanzania with selective separation of fine material depending on the content of valuable materials

    • Dr Lautsch, Heidelberg Technology Centre

       

  • New remotely adjustable gap control for double-roll crushers with overload function

    • Mr Götz, AUBEMA Crushing Technology GmbH

       

  • Optimisation of the crushing process in vertical centrifugal crushers

    • Mr Al-Khasawneh, TU Bergakademie Freiberg

       

  • Current developments in the field of conveyor belt cleaning

    • Mr Hanke, F. E. Schulte Strathaus GmbH

       

  • Energy-efficient comminution using fluidised-bed roller mills in the cement industry

    • Dr H. Günter / Dr Hanstein, Köppern Aufbereitungstechnik GmbH

       

  • Use of roller mills in cement production

    • Dr Hackländer-Woywadt, Loesche GmbH

       

  • Wear-resistant components for use in pneumatic conveying in the cement industry

    • Mr Zinser, Coperion GmbH

       

  • Investigations into the comminution behaviour of cement clinker

    • Dr Meltke/Ms Schreiber, TU Bergakademie Freiberg

Presentations 8–10 March 2007

• Welcome address by Dr Kemmann

  • Chairman of the Construction and Building Materials Machinery Association within the VDMA

     

• Technical and physical principles of the refining process    

  • Prof. Dr.-Ing. G. Unland, TU Bergakademie Freiberg

     

• Theoretical and experimental investigations into washing processes

  • Dipl.-Ing. Müller, TU Bergakademie Freiberg

     

• Hydroclean – washing system for primary and secondary raw materials

  • Mr Hoppe, Haver & Boecker

     

• Aqua-vibrating screen – application and function

  • Dr Holländer, ThyssenKrupp Fördertechnik GmbH

     

• Modern concepts in wash water treatment

  • Dipl.-Ing. Hörschkes, Metso Minerals (Germany) GmbH

     

• Properties of the rotor centrifugal crusher for selective impact crushing

  • Dr Schmandra, BHS Sonthofen GmbH

     

• Selective crushing of phosphate ore

  • Dr.-Ing. K. Meltke, Dipl.-Geol. O. Popov, TU Bergakademie Freiberg

     

• Selective crushing in industrial practice

  • Dr Zibulski, Hazemag & EPR GmbH

     

• Assessment of the crushability of solid rocks

  • Prof. Dr.-Ing. G. Unland, Dr.-Ing. K. Meltke, TU Bergakademie Freiberg

Presentations 26–28 January 2006

• Welcome address by Dr Kemmann

  • Chairman of the Construction and Building Materials Machinery Association within the VDMA

     

• Presentation of the TU Bergakademie Freiberg and the Institute for Processing Machinery

  • Prof. Dr.-Ing. G. Unland, TU Bergakademie Freiberg

     

• Selection criteria for crushers

  • Prof. Dr.-Ing. G. Unland, TU Bergakademie Freiberg

     

• Case study: Adapting machinery to the geology of the deposit

  • Dr Kumann, Breitenauer Grauwacke GmbH & Co.KG

     

• A new generation of crushers: milling roller crushers – fundamentals

  • Dipl.-Ing. Schmidt, TU Bergakademie Freiberg

     

• Case study: Fortuna coal bunker / Niederaußem power station

  • Dipl.-Ing. Kuhnke, RWE Power

     

• Wear: Measures for reduction

  • Dr.-Ing. K. Meltke, TU Bergakademie Freiberg