2026

  • Reyes-Martinez, D.; Salces, A.M.; Pangilinan, C.; Megaloudi, R.-A.; Xanthopoulos, P.; Rudolph, M.; Charitos, A.: Simplifying thermal pretreatment of lithium iron phosphate cells: Benefits of whole-cell processing without inert atmospheres. Journal of Cleaner Production 538 (2026), 147444 https://doi.org/10.1016/j.jclepro.2025.147444
  • Kandalam, A.; Reuter, M.A.; Stelter, M.; Richter, A.; Kupsch, C.; Charitos, A.: Acoustic and Inertial Sensor Techniques for Top Submerged Lance (TSL) Technology: A Practical Framework for Characterising Bubble Dynamics Under High-Temperature Conditions. Metals (2026), 16, 519. https://doi.org/10.3390/met16050519
  • Yakoumis, I.; Moschovi, A.-M.; Thoda, O.; Katsiapi, A.; Stamatopoulou, P.; Charitos, A.; Sandig-Predzymirska, L.; Wamunyu, W.; Adjapong, S. et al. CRUSADE project: Recycling technologies for end-of-life vehicle (ELV) components to create a sustainable source of market-grade materials for EU applications. Computational and Structural Biotechnology Journal (2026), 33:28–42. https://doi.org/10.1016/j.csbj.2025.12.016
  • Romero, J.L.; Recksiek, V.; Debastiani, R; Hossain, Md N.; Blenau, L.; Charitos, A.; Vaisanen, A.O.; Patil, A. B.: Pyrometallurgical valorisation of Waelz, fayalite and Linz-Donawitz slag mixtures. Scientific Reports 16, 9539 (2026). https://doi.org/10.1038/s41598-026-44763-3
  • Adamczyk, A.; Hossain, F.; Garcia Paz, F.A.; Yaroshevskyi, S.; Drechsler, F.; Vogt, A.; Aneziris, C.G.; Charitos, A.: Corrosion and Process Analysis of a Preoxidised MgO Recyclate-Based Cermet Anode in Laboratory-Scale Na-Cryolite Molten Salt Electrolysis of Aluminium at 1000°C. Advanced Engineering Materials (2026), 28, e202502855. https://doi.org/10.1002/adem.202502855
  • Hossain, F.; Adamczyk, A.; Garcia Paz, F.A.; Yaroshevskyi, S.; Drechsler, F.; Vogt, A.; Aneziris, C.G.; Charitos, A.: Interaction of MgO Recyclate-Based Cermet Anode With KF-AlF3-Al2O3 at 800°C During Laboratory-Scale Aluminium Molten Salt Electrolysis. Advanced Engineering Materials (2026), 28, e202502869 https://doi.org/10.1002/adem.202502869
  • Garcia Paz, F.A.; Otgonbayar, U.; Adamczyk, A.; Hossain, F.; Vogt, D.; Pettersen, J. B.; Charitos, A.: Towards Low-Consumable Anodes: Process Simulation and Prospective Life Cycle Assessment of NiFe₂O₄-NiO-Ni-Cu versus Prebaked Anodes for Aluminium Production using Molten Salt Electrolysis. Advanced Engineering Materials (2026), 28, e202502871 https://doi.org/10.1002/adem.202502871
  • Yaroshevskyi, S.; Adamczyk, A.; Brachhold, N.;Schmidt, G.; Hubálková, J.; Gumeniuk, R.; Charitos, A.; Aneziris, C.G.: Characterisation of a Recyclate-Based MgO-Steel Composite As-Sintered Inert Anode Candidate After Exposure to Cryolite Electrolysis. Advanced Engineering Materials (2026), 28, e202502773 https://doi.org/10.1002/adem.202502773
  • Drechsler, F.; Yaroshevskyi, S.; Adamczyk, A.; Mehdizadehlima, M.; Richter, J.; Himcinschi, C.; Rafaja, D.; Charitos, A.; Aneziris, C.G.; Kortus, J.: Raman Spectroscopic Identification of Oxide Phases in a Corroded MgO–Steel Composite Anode Used in Aluminium Molten Salt Electrolysis. Advanced Engineering Materials (2026), 28, e202502864 https://doi.org/10.1002/adem.202502864

2025

  • Voigt, C.; Kerber, F.; Gumban, C.G.; Schwedler, O.; Brachold, N.; Schmidt, G.; Hubálková, J.; Charitos, A.; Aneziris, C.G.: Non-metallic inclusions in copper and copper alloys. Journal of Materials Research and Technology 39 (2025) https://doi.org/10.1016/j.jmrt.2025.11.235
  • S. Kwegyir; A. Thiere; A. Charitos.: Tin extraction from cassiterite concentrate using an alkaline fusion-leaching process. ERZMETALL 78 (3) 2025 https://www.researchgate.net/publication/393550621_Tin_extraction_from_cassiterite_concentrate_using_alkaline-fusion-leaching_process
  • Völs, P.; Veiga Barreiros, T.; Laplana, A.D.; Sandig-Predzymirska, L.; Charitos, A.: Leaching of Solid Oxide Electrolyser Cells for a Circular Hydrogen Economy. Journal of Sustainable Metallurgy 11 (2025) https://doi.org/10.1007/s40831-025-01080-9
  • Sandig-Predzymirska, L.; Veiga-Barreiros, T.; Weigelt, A.; Pitscheider, S.; Mølleskov Pedersen, C.; Kallesøe, C.; Thiere, A.; Stelter, M.; Charitos, A.: Recovery of Platinum and Ruthenium from PEM Electrodes via a Hydrometallurgical Approach. Journal of Sustainable Metallurgy 11 (2025) https://doi.org/10.1007/s40831-025-01011-8
  • Ashrafi, E.A.; Voigt, A.D.; Felkl, L.; Kwegyir, S.; Kota, S.-P.; Blenau, L., Richter, A.; Charitos, A.: Hydrogen Reduction of Cassiterite Concentrate and Possibilities for Sustainable Tin Extraction. Journal of Sustainable Metallurgy 11 (2025) https://doi.org/10.1007/s40831-025-01096-1
  • Felkl, L.; Stelter, M.; Charitos, A.: Hydrogen-based Reduction of Anode Furnace Slag for the Production of a Copper-rich Alloy in the Context of Secondary Copper Production. ERZMETALL 78(2) 2025 Full Open Access Paper
  • Carneiro, G.; Bier, T.; Waida, S.; Dous, A.; Heinemann, S.; Herr, P.; Charitos, A.: Treatment of fly ash from energy-from-waste plants for use as a blast furnace slag substitute and supplementary cementitious material. Journal of Cleaner Production 490 (2025) https://doi.org/10.1016/j.jclepro.2025.144693
  • Wagler, J.; Meiner, K.; Gattnar, F.; Thiere, A., Stelter, M., Charitos, A.: Sodium Dithiocuprate(I) Dodecahydrate [Na3(H2O)12][CuS2], the First Crystal Structure of an ExclusH-bonded dithiocuprate(I) ion, and its formation in the alkaline sulphide treatment of copper ore concentrates. Crystals 15(6) (2025) https://doi.org/10.3390/cryst15060501
  • Gumban, C.G.; Hubálková, J.; Charitos, A.; Aneziris, C.G.; Voigt, C.: Copper melt filtration with carbon-bonded alumina foam filters. Journal of the European Ceramic Society 45(5) https://doi.org/10.1016/j.jeurceramsoc.2024.117145
  • Becker, H.; Waschull, S.; Fankhänel, B.; Voigt, C.; Charitos, A.; Aneziris, C.G.; Leineweber, A.: Reactive Interaction and Wetting of Fe- and Mn-Containing, Secondary AlSi Alloys with Manganese Oxide Ceramic Filter Material for Fe Removal. Advanced Engineering Materials https://doi.org/10.1002/adem.202500636
  • Wei, X.; Fankhänel, B., Zhao, W.; Perminov, A.; Storti, E.; Liu, M.; Ma, G.; Fabrichnaya, O.; Charitos, A.; Volkova, O.: The wettability of pure liquid aluminium on oxide substrates. Journal of the American Ceramic Society 108(1) (2025). https://doi.org/10.1111/jace.20103
  • Huang, D.; Schramm, A.; Gumban, C.G.; Hubálková, J.; Charitos, A.; Aneziris, C.G.; Voigt, C.: Ceramic foam filters with concentrated carbon binder surfaces for copper melt filtration. Ceramics International 51(4) (2025). https://doi.org/10.1016/j.ceramint.2024.11.457
  • Romero J.L.; Recksiek, V.; Blenau, L.; Kelly, N.; Ebert, D.; Guy, B.M.; Viswamsetty, L.K.; Stelter, M.; Charitos, A.; Vaisanen, A.O.; Patil, A.B.: Sustainable Valorisation of Waelz Slag: Recovery of Zinc, Manganese, and Iron with Slag Stabilisation. Sustainable Resource Management (2025) https://doi.org/10.1021/acssusresmgt.5c00262

2024

2023

  • Gumban, C.G.; Hubálková, J.; Fankhänel, B.; Charitos, A.; Aneziris, C.G.; Voigt, C.: Wetting properties and chemical interactions of copper with industrial filter materials. Ceramics International 49(19) (2023), p. 31445. https://doi.org/10.1016/j.ceramint.2023.07.092
  • Gumban C.G., Hubálková J., Neumann M., Werzner E., Charitos A., Aneziris CG, Voigt C.: Thermal shock resistance of industrial foam filters– a comparative study. Open Ceramics 16 (2023) Elsevier. https://doi.org/10.1016/j.oceram.2023.100463
  • Becker, H.; Fankhänel, B.; Charitos, A.; Baier-Stegmaier, S.; Leineweber, A.; Pantleon, W.: Formation of primary intermetallic phases in the interaction of Fe-containing melts of recycled Al-Si alloys with Al2O3 and Al2O3-C filter materials: A µ-CT study. Journal of Materials Science & Technology 184 (2024), pp. 88–100. https://doi.org/10.1016/j.jmst.2023.09.047
  • Schmidt, A.; Montenegro, V.; Charitos, A.; Reuter, M.; Stelter, M.; Richter, A.: CFD simulation of SO₃ formation in an industrial-scale copper smelting waste heat boiler. ERZMETALL (2023). https://doi.org/10.1007/s11663-021-02389-y
  • Weigelt, C.; Yaroshevskyi, S.; Kerber, F.; Bracholad, N.; Zienert, T.; Adamczyk, A.; Vogt, D.; Charitos, A.; Aneziris, C.G.: Investigations into the corrosion of 316L steel composite materials with MgO/TiO2 ceramic immersed in molten cryolite. Open Ceramics (2023). https://doi.org/10.1016/j.oceram.2023.100480
  • Kandalam, A.; Reuter, M.; Stelter, M.; Reinmöller, M.; Gräbner, M.; Richter, A.; Charitos, A.: A Review of Top-Submerged Lance (TSL) Processing—Part I: Plant and Reactor Engineering. Metals (2023). https://doi.org/10.3390/met13101728
  • Kandalam, A.; Reuter, M.; Stelter, M.; Reinmöller, M.; Gräbner, M.; Richter, A.; Charitos, A.: A Review of Top Submerged Lance (TSL) Processing—Part II: Thermodynamics, Slag Chemistry and Plant Flowsheets. Metals (2023). https://doi.org/10.3390/met13101742
  • Blenau, L.W.; Sander, S.A.H.; Fuhrmann, S.; Charitos, A.: Holistic valorisation of fayalitic slag into glass fibres and pig iron. Journal of Cleaner Production (2023). https://doi.org/10.1016/j.jclepro.2023.137990
  • Otgonbayar, U.; Sandig-Predzymirska, L., Thiere, A.: Charitos, A.: Process development for the separation of Pt, Ru and Ir by solvent extraction. ERZMETALL (2023).
  • Kubiak, A.; Pajewska-Szmyt, M.; Kotula, M.; Lesniewski, B.; Voronkina, A.; Rahimi, P.; Falahi, S.; Heimler, K.; Rogoll, A.; Vogt, C.; Ereskovsky, A.; Simon, P.; Langer, E.; Springer, A.; Förste, M.; Charitos, A.; Joseph, Y.; Jesionowski, T.; Herrmann, E.: Spongin as a Unique 3D Template for the Development of Functional Iron-Based Composites Using a Biomimetic Approach In Vitro. Marine Drugs (2023). https://doi.org/10.3390/md21090460
  • Blenau, L.W.; Vogt, D.; Lonski, O.; Abuzar, A.; Fabrichnaya, O.; Charitos, A.: Development of a Process to Recycle NdFeB Permanent Magnets Based on the CaO-Al₂O₃-Nd₂O₃ slag system. Processes (2023). https://doi.org/10.3390/pr11061783
  • Schmidt, A.; Guy, B.M., Montenegro, V.; Reuter, M.; Charitos, A.; Stelter, M.; Richter, A.: Flue Dust Reactions and Sticking Mechanisms in a Copper Flash Smelting Furnace Waste Heat Boiler: A Sampling Study. Journal of Sustainable Metallurgy (2023). https://doi.org/10.1007/s40831-023-00691-4
  • Ilatovskaia, M.; Lonski, O.; Löffler, M.; Blenau, L.; Charitos, A.; Fabrichnaya, O.: Phase Relations in the CaO-Nd2O3-Al2O3 system in application for rare earth recycling. JOM (2023). https://doi.org/10.1007/s11837-023-05731-8
  • Scharf, C.: Special Issue – High-Tech Metals – Overview, Microstructure, Properties and Recyclability, MDPI Open Access Journal “Crystals” (IF = 2.7) with 12 publications Link: mdpi.com/journal/crystals/special_issues/high_tech_metals
  • Felkl, L., Schwedler, O., Charitos, A.: Influence of the enrichment of natural gas with hydrogen on the hydrogen solubility of different copper grades and the heat balance. Metal (2023). https://doi.org/10.37904/metal.2023.4669

2022

  • Kandalam, A., Stelter, M., Reinmöller, M., Reuter, M.A., Charitos, A.: Determining the Bubble Dynamics of a Top Submerged Lance. In: REWAS 2022: Developing Tomorrow’s Technical Cycles (Volume I). The Minerals, Metals & Materials Series (2022). Springer, Cham. pp. 541–551. https://doi.org/10.1007/978-3-030-92563-5_57
  • Schramm A., Thümmler M., Fabrichnaya O., Brehm S., Kraus J., Kortus J., Rafaja D., Scharf C., Aneziris C.G.: Reaction Sintering of MgAlON at 1500 °C from Al₂O₃, MgO and AlN and Its Wettability by AlSi₇Mg. Crystals 12 (5) (2022), p. 654. https://doi.org/10.3390/cryst12050654
  • Voigt C., Schramm A., Fankhänel B., Schmid E., Malczyk P., Hubálková J., Stelter M., Charitos A., Aneziris C.G.: Preparation of Ceramic Foam Filters With a Lithium-Containing Surface. Metallurgical and Materials Transactions B, Springer International Publishing AG, Basel. https://doi.org/10.1007/s11663-022-02533-2
  • Pätzold O., Dadzis K., Kirmse C., Weik D., Büttner L., Czarske J., Charitos A.: Model experiments for melt flow in Czochralski growth of silicon. Journal of Crystal Growth, Vol. 588, Article number 126656. https://doi.org/10.1016/j.jcrysgro.2022.126656
  • Thiere A., Bombach H., Stelter M.: The Behaviour of Ruthenium in Copper Electrowinning. Metals. 2022; 12(8):1260. https://doi.org/10.3390/met12081260
  • Schmidt, A., Montenegro, V., Reuter, M. et al.: Transient CFD Calculation of Accretion Formation in a Copper Waste Heat Boiler. Metall Mater Trans B (2022). https://doi.org/10.1007/s11663-022-02639-7
  • Florian B., Förste M., Dadzis K., Tsiapkinis I., Pätzold O., Charitos A., Dues M., Czarske J., Büttner L.: Application of optical velocity measurements, including a novel calibration technique for micron-resolution, to investigate the gas flow in a model experiment for crystal growth. Flow Meas Instrum. Vol. 88, Article No. 102258. https://doi.org/10.1016/j.flowmeasinst.2022.102258

2021

  • Rezende J., van Schalkwyk R.F., Reuter M.A., to Baben M.: A dynamic thermochemistry‑based process model for lead smelting in the TSL Process. Journal of Sustainable Metallurgy 7 (3) (2021), Springer, Heidelberg, ISSN (online): 2199-3831, ISSN (print): 2199-3823, pp. 964–977. https://doi.org/10.1007/s40831-021-00387-7
  • Fankhänel, B.; Hubálková, J.; Aneziris, C.G.; Stelter, M.; Charitos, A.: Influencing the hydrogen porosity in aluminium casting by (re)active filter materials. Advanced Engineering Materials (2021), Wiley-VCH GmbH, Weinheim, ISSN (online): 1527-2648, ISSN (print): 1438-1656, Article number 2100579, pp. 1–10. https://doi.org/10.1002/adem.202100579
  • Becker, H.; Fankhänel, B.; Voigt, C.; Charitos, A.; Stelter, M.; Aneziris, C.G.; Leineweber, A.: Interaction of Fe-containing, secondary Al-Si alloy with oxide and carbon-containing ceramics for Fe removal. Advanced Engineering Materials (2021), Wiley-VCH GmbH, Weinheim, ISSN (online): 1527-2648, ISSN (print): 1438-1656, Article number 2100595, pp. 1–12. https://doi.org/10.1002/adem.202100595
  • Schramm, A., Recksiek, V., Dudczig, S., Scharf, C., Aneziris, C.G.: Immersion Testing of Variously Coated Ceramic Foam Filters in an AZ91 Magnesium Melt. Advanced Engineering Materials (2021), Wiley-VCH GmbH, Weinheim, ISSN (online): 1527-2648, ISSN (print): 1438–1656, Article number 2100519, pp. 1–12. https://doi.org/10.1002/adem.202100519
  • Hopf, J., Weigelt A., Bombach H., Stelter M., Charitos, A.: Refining of Precious Metal-Bearing Materials from Secondary Sources – Methanesulfonic Acid Leaching of Raw Silver Granules as a Promising Approach towards a Green Method of Silver Refining. Materials 2021, 14(20), MDPI, Basel, ISSN (online): 1996–1944, Article number 6095. https://doi.org/10.3390/ma14206095
  • Schmidt A., Montenegro V., Reuter M., Charitos A., Stelter M., Richter, A.: CFD Study on the Physical Behaviour of Flue Dust in an Industrial-Scale Copper Waste Heat Boiler. Metallurgical and Materials Transactions B (2021), Springer International Publishing AG, Basel, ISSN (online): 1543-1916. https://doi.org/10.1007/s11663-021-02389-y

2020

  • Dadzis K., Pätzold O., Gerbeth G.: Model experiments for flow phenomena in crystal growth, Cryst. Res. Technol. 55 (2020), Article number 1900096 (pp. 1–7), https://doi.org/10.1002/crat.201900096
  • Schneider T., Förste M., Lukin G., Fischer P., Barchuk M., Schimpf C., Niederschlag E., Pätzold O., Rafaja D., Stelter M.: Recent progress in high-temperature vapour-phase epitaxy for the growth of GaN layers – Controlled coalescence of nucleation layers, J. Cryst. Growth 533 (2020), Article number 125465, https://doi.org/10.1016/j.jcrysgro.2019.125465
  • Abadías Llamas A., Bartie N.J., Heibeck M., Stelter M., Reuter M.A.: Simulation-Based Exergy Analysis of Large Circular Economy Systems: Zinc Production Coupled to CdTe Photovoltaic Module Life Cycle, J. Sustain. Metall. 6 (2020), pp. 34–67, https://doi.org/10.1007/s40831-019-00255-5
  • Voigt C., Fankhänel B., Dietrich B., Storti E., Badowski M., Gorshunova M., Wolf G., Stelter M., Aneziris C.G.: Influence of ceramic foam filters with Al₂O₃ nanocoating on aluminium filtration behaviour tested with and without a grain refiner, Metallurgical and Materials Transactions B 51(5) (2020), pp. 2371–2380, https://doi.org/10.1007/s11663-020-01900-1
  • Voigt C., Hubálková J., Zienert T., Fankhänel B., Stelter M., Charitos A., Aneziris C.G.: Aluminium melt filtration with carbon-bonded alumina filters, Materials 13(18) (2020), p. 3962, https://doi.org/10.3390/ma13183962
  • Schramm, A., Voigt, C., Hubálková, J., Scharf, C., Aneziris, C.G.: Influence of the Manufacturing Technique on the Macroand Microstructure of Reticulated Carbon-Bonded Alumina Foams, Advanced Engineering Materials, Volume 22, Issue 2, February 2020, 1900525 (11 pages), https://doi.org/10.1002/adem.201901466
  • Fankhänel B., Stelter M., Charitos A.: Multi-functional filters for metal melt filtration – aluminium, World of Metallurgy - ERZMETALL 73(5) (2020), GDMB Verlag GmbH Clausthal-Zellerfeld, ISSN: 1613-2394, pp. 242–246
  • Thiere A., Bombach H., Stelter M.: The Oxidation Behaviour of Ruthenium in the Copper Electro-winning Process, World of Metallurgy – 73(6) (2020), GDMB Verlag GmbH Clausthal-Zellerfeld, ISSN: 1613-2394, pp. 290–296

2019

  • Abadías Llamas A., Valero Delgado A., Valero Capilla A., Torres Cuadra C., Hultgren M., Peltomäk M., Roine A., Stelter M., Reuter M.A.: Simulation-based exergy, thermo-economic and environmental footprint analysis of primary copper production, Miner. Engineering, 131 (2019), pp. 51–65
  • Fankhänel B., Grötz S., Stelter M.: Influence of melton hydrogen porosity in aluminium castings, World of Metallurgy – Erzmetall 72 (1) (2019), pp. 32–38
  • Thieme N., Büchner K., Büttner L., Pätzold O., Czarske J.: Three-dimensional flow studies in cylindrical magnetohydrodynamic experiments using ultrasound array velocimetry, IEEE Transactions on Ultrasonic, Ferroelectrics, and Frequency Control, 66 (2019) 1, pp. 138–145
  • Naikade M., Fankhänel B., Weber L., Ortona A., Stelter M., Graule T.: Studying the wettability of Si and eutectic Si–Zr alloy on carbon and silicon carbide by sessile drop experiments, J. Eur. Ceram. Soc., 39 (2019) 4, pp. 735–742
  • Thieme N., Keil M., Meier D., Bönisch P., Dadzis K., Pätzold O., Stelter M., Büttner L., Czarske, J.: Directional solidification of gallium under time-dependent magnetic fields with in situ measurements of the melt flow and the solid-liquid interface, J. Cryst. Growth 522 (2019), pp. 221–229
  • Lukin G., Schneider T., Förste M., Barchuk M., Schimpf C., Röder C., Zimmermann F., Niederschlag E., Pätzold O., Beyer F. C., Rafaja D., Stelter M.: Heteroepitaxial growth of GaN on sapphire substrates by high-temperature vapour-phase epitaxy, J. Cryst. Growth 524 (2019), Article number 125185
  • Barchuk M., Motylenko M., Schneider T., Förste M., Röder C., Davydok A., Lazarev S., Schimpf C., Wüstefeld C., Pätzold O., Rafaja D.: Defect-rich GaN interlayer facilitating the annihilation of threading dislocations in polar GaN crystals grown on (0001)-oriented sapphire substrates, J. Appl. Phys. 126 (2019), Article number 085301
  • Fankhänel B., Stelter M.: Use of the sessile-drop method in teaching and research, ACAMONTA: Journal for Friends and Supporters of the TU Bergakademie Freiberg 26 (2019), p. 111
  • Łakoma, P., Ditze, A., Scharf, C.: Dendritic structure formation in magnesium alloys for the manipulation of corrosion properties: Part 2 – corrosion, Int. J. Mater. Res. (formerly Z. Metallkd.) 110 (2019), Vol. 8, pp. 703–714, ISSN 1862-5282, https://doi.org/10.3139/146.111790
  • Balinski, A., Atanasova, P., Wiche, O., Kelly, N., Reuter, M.A., Scharf,C.: Selective Leaching of Rare Earth Elements (REEs) from Eudialyte Concentrate after Sulfation and Thermal Decomposition of Non-REE Sulphates, Minerals 2019, Vol. 9, pp. 522–533, https://doi.org/10.3390/min9090522

2018

  • Herms M., Wagner M., Kayser S., Kießling F., Poklad A., Zhao M., Kretzer U.: Photo-elastic characterisation of defect structures in mono- and multi-crystalline semiconductor materials, Materials Today: Proceedings, 5 (2018), pp. 14748–14756
  • Barchuk M., Motylenko M., Lukin G., Röder C., Pätzold O., Rafaja D.: Influence of Ammonia Flow on Microstructural Properties of Polar GaN Layers Grown by HTVPE on Sapphire Substrates, Crystal Research and Technology, 53 (2018), p. 1700113 (1–5)
  • van Schalkwyk R. F., Reuter M. A., Gutzmer J., Stelter M.: Challenges of digitalising the circular economy: Assessment of the state-of-the-art of metallurgical carrier metal platforms for lead and its associated technological elements, Journal of Cleaner Production, 186 (2018), pp. 585–601
  • Ohmann, S., Ditze, A., Scharf, C.: Semi-Solid Remelting of Magnesium Chips, JOM The Minerals, Metals & Materials Society, Technical Communication, ISSN 1047-4838, DOI: https://doi.org/10.1007/s11837-018-2795-2, 28 February 2018.
  • Schramm, A., Bock, B., Schmidt, A., Zienert, T., Ditze, A., Scharf, C., Aneziris, C.G.: Interface reactions of differently coated carbon-bonded alumina filters with an AZ91 magnesium alloy melt, Ceramics International 44 (2018), pp. 17415–17424, DOI: https://doi.org/10.1016/j.ceramint.2018.06.207
  • Scharf, C., Ditze,A.: Thermodynamic evaluation using the law of mass action, taking into account the activity coefficients in the NdCl₃ – HCl (or NaOH) – H₂O – DEHPA – kerosene, Metall. Res. Technol. (2018), DOI: https://doi.org/10.1051/metal/2018063
  • Łakoma, P., Ditze, A., Scharf, C.: Dendritic structure formation of magnesium alloys for the manipulation of corrosion properties: Part 1 – microstructure, Int. J. Mater. Res. (formerly Z. Metallkd.) 109 (2018), Vol. 12, pp. 1081–1091, ISSN 1862-5282, DOI: https://doi.org/10.3139/146.111708
  • Helbig, T., Gilbricht, S., Lehmann,F., Daus, B., Kelly, N., Haseneder, R., Scharf, C.: Oxidative leaching of a sulphidic flue dust from former copper shale processing with a focus on rhenium, Minerals Engineering 128 (2018), pp. 168–178, DOI: https://doi.org/10.1016/j.mineng.2018.08.028

2017

  • Klug T., Vogel W., Fankhänel B., Stelter M.: Purification of aluminium melts using salt mixtures, World of Metallurgy – Erzmetall, 70 (2) (2017), pp. 104–112
  • Fankhänel B., Stelter M., Voigt C., Aneziris C.G.: Interaction of AlSi7Mg with oxide ceramics, Advanced Engineering Materials, 19 (9) (2017), p. 1700084 (1–8)
  • Bombach H.; Stelter M.; Greschner H.; Martin S.; Kamptner D.: Removal of phosphorus compounds from electroplating effluents (Part 1), Galvanotechnik, 108 (5) (2017), pp. 1024–1028
  • Bombach H., Stelter M., Greschner H., Martin S., Kamptner D.: Removal of phosphorus compounds from electroplating effluents (Part 2), Galvanotechnik, 108(6) (2017), pp. 1240–1245
  • Bombach H., Stelter M., Greschner H., Martin S., Kamptner D.: Removal of phosphorus compounds from electroplating effluents (Part 3), Galvanotechnik, 108(7) (2017), pp. 1460–1465
  • Meier D., Lukin G., Thieme N., Bönisch P., Dadzis K., Büttner L., Pätzold O., Czarske J., Stelter M.: Design of model experiments for melt flow and solidification in a square container under time-dependent magnetic fields, J. Cryst. Growth, 461 (2017), pp. 30–37
  • Schneider T., Lukin G., Zimmermann F., Barchuk M., Niederschlag E., Pätzold O., Stelter M.: Studies on high-temperature vapour-phase epitaxy of GaN. J. Cryst. Growth, 468 (2017), pp. 212–215
  • Lukin G., Schneider T., Barchuk M., Zimmermann F., Niederschlag E., Pätzold O., Stelter M.: Modified high-temperature vapour-phase epitaxy for the growth of GaN films, Phys. Stat. Sol. A, 214 (2017), 1600753 (pp. 1–8)
  • Barchuk M., Lukin G., Zimmermann F., Röder C., Motylenko M., Pätzold O., Heitmann J., Kortus J., Rafaja D.: Effect of the Ammonia Flow on the Formation of Microstructural Defects in GaN Layers Grown by High-Temperature Vapour Phase Epitaxy, J. Electronic Materials, 46 (2017), pp. 1612–1619
  • Thieme N., Nauber R., Beyer H., Büttner L., Czarske J., Bönisch P., Dadzis K., Sylla L., Meier D., O. Pätzold: Ultrasound flow mapping for the investigation of crystal growth, IEEE Transactions on Ultrasonic, Ferroelectrics, and Frequency Control, 64 (2017) 4, pp. 725–735
  • Barchuk M., Motylenko M., Lukin G., Pätzold O., Rafaja D.: Effect of screw-threading dislocations and inverse domain boundaries in GaN on the shape of reciprocal space maps, J. Appl. Crystallography, 50 (2017), pp. 555–560
  • Poklad A., Pal J., Galindo V., Grants I., Heinze V., Meier D., Pätzold O., Stelter M., Gerbeth G.: Magnetic flow control in the growth and casting of photovoltaic silicon: Numerical and experimental results, IOP Conf. Series: Materials Science and Engineering, 228 (2017), p. 012017 (1–9)
  • Dressler A., Keil M., Müller T., Stelter M.: The Possible Use of Methanesulfonic Acid as a New Electrolyte for Silver Electro-Refining – Investigations into the possible use of methanesulfonic acid as an alternative electrolyte for the electro-refining of silver, World of Metallurgy – Erzmetall, 70 (2017) 5, pp. 265–270
  • Petrenko I., Bazhenov V., Galli R., Wysokowski M., Fromont J., Schupp P. J., Stelling A. L., Niederschlag E., Stöcker H., Kutsova V. Z., Jesionowski T., Ehrlich H.: Chitin of poriferan origin and the bioelectrometallurgy of copper/copper oxide, International Journal of Biological Macromolecules, 104 Part B (2017), pp. 1626–1632
  • Rombach E., Schmid E.: “GERRI carries out competence mapping for German raw materials research”, World of Metallurgy – Erzmetall, 70 (2017) 1, pp. 55–58
  • Thieme N., Nauber R., Büttner L., Czarske J., Büchner K., Pätzold O.: Ultrasound flow mapping for 3D turbulent liquid metal flows, Proc. Int. Ultrasonics Symp. (IUS), 8092566 (2017), pp. 1–4
  • Scharf, C., Ditze,A.: Solvent extraction: Fundamental equilibrium studies of neodymium and DEHPA, Metallurgical Research & Technology 114, 404 (2017), pp. 1–9, https://doi.org/10.1051/metal/2017017

2016

  • Uhlir K., Padilla-Alvarez R., Migliori A., Karydas A.G., Božičević Mihalić I., Jakšić M., Zamboni I., Lehmann R., Stelter M., Griesser M., Schindel N., Alram M.: “The mystery of mercury layers on ancient coins – A multianalytical study on Sasanian coins from the reign of Khusro II”, Microchemical Journal, 125 (2016), pp. 159–169
  • Nauber R., Thieme N., Radner H., Beyer H., Büttner L., Dadzis K., Pätzold O., Czarske J.: “Ultrasound flow mapping of complex liquid metal flows with spatial self-calibration”, Flow Meas. Inst., 48 (2016), pp. 59–63
  • Dadzis K., Lukin G., Meier D., Bönisch P., Sylla L., Pätzold O.: “Directional melting and solidification of gallium in a travelling magnetic field as a model experiment for silicon processes”, J. Cryst. Growth, 445 (2016), pp. 90–100
  • Ehrlich H., Motylenko M., Sundareshwar P. V., Ereskovsky A., Zgłobicka I., Noga T., Płocinski T., Tsurkan M. V., Wyroba E., Suski S., Bilski H., Wysokowski M., Stöcker H., Makarova A., Vyalikh D., Walter J., Molodtsov S. L., Bazhenov V. V., Petrenko I., Langer E., Richter A., Niederschlag E., Pisarek M., Springer A., Gelinsky M., Rafaja D., Witkowski A., Meyer D. C., Jesionowski T., Kurzydłowski K. J.: “Multiphase Biomineralisation: Enigmatic Invasive Siliceous Diatoms Produce Crystalline Calcite”, Adv. Funct. Mater., 26 (2016), pp. 2503–2510
  • Stelter M.: “250 Years of Research in Non-Ferrous Metallurgyat the TU Bergakademie Freiberg”, *Gaswärme international*, 5 (2016), pp. 117–120
  • Klug T., Vogel W., Fankhänel B., Stelter M.: “A refresher course on the purification of aluminium melts using salt preparations” in: Giesserei – Journal of Foundry Economics and Technology, 103 (2016) 6, pp. 50–61
  • Bombach H., Baumbach J., Stelter M.: “Impact of Additives on Copper Electro-Crystallisation” in: “Highlights of Research at the TU Bergakademie Freiberg 250 Years After Its Founding”, TU Bergakademie Freiberg, Chemnitz Verlag, (2016), p. 186-192
  • Ditze, A., Scharf, C.: Experimental measurements in melting ingots in the melt of the same material, International Journal of Thermal Sciences 112 (2017), pp. 211–221, DOI: https://doi.org/10.1016/j.ijthermalsci.2016.10.010

2015

  • Fankhänel B., Stelter M., Voigt C., Aneziris Ch. G.: ‘Wettability of AlSi5Mg on Spodumene’, Metallurgical and Materials Transactions B, 46 (2015) 2, pp. 1535–1541
  • Voigt C., Fankhänel B., Jäckel E., Aneziris C. G., Stelter M., Hubálková J.: “Effect of the Filter Surface Chemistry on the Filtration of Aluminium”, Metallurgical and Materials Transactions B, 46 (2015) 2, pp. 1066–1072
  • Wolf R., Stelter M.: “Joint recycling of flat-screen displays and lead glass”, Chemie Ingenieur Technik, 11 (2015), pp. 1613–1616
  • Wolf R., Stelter M.: “Recycling of nickel-containing catalysts”, Chemie Ingenieur Technik, 11 (2015), pp. 1543–1549
  • Schmid E., Poklad A., Heinze V., Meier D., Pätzold O., Stelter M.: “Growth of multicrystalline silicon in a cone-shaped crucible”, J. Cryst. Growth, 416 (2015), pp. 1–7
  • Ehrig J., Stelter M., Scheel M., Morgenstern G.: “Recycling of nickel-containing catalysts”, Chem. Ing. Techn., 87 (2015) 11, pp. 1543
  • Scharf, C., Ditze, A.: Recycling of black dross containing rare earths originating from the melting and recycling of magnesium alloys, Hydrometallurgy 157, 2015, pp. 140–148, DOI: https://doi.org/10.1016/j.hydromet.2015.08.006
  • Ohmann, S., Ditze, A., Scharf, C.: Analysis methods for magnesium chips, JOM, Volume 67, No. 11, 2015, pp. 2747–2753, DOI: https://doi.org/10.1007/s11837-015-1630-2

2014

  • Stelter M.: ‘Market trends for technology metals’, World of Metallurgy – Erzmetall, 67 (2014) 1, pp. 22–27
  • Stelter M., Bombach H.: ‘Separation of chloride from sulphuric acid zinc electrolytes by anodic oxidation’, World of Metallurgy – Erzmetall, 67 (2014) 4, pp. 207–212
  • Barchuk M., Röder C., Shashev Y., Lukin G., Kortus J., Pätzold O., Rafaja D.: “Correlation between the residual stress and the density of threading dislocations in GaN layers grown by hydride vapour phase epitaxy”, J. Cryst. Growth, 389 (2014), p. 1–8
  • Lukin G., Röder C., Barchuk M., Schreiber G., Pätzold O., Kortus J., Rafaja D., Stelter M.: “Investigation of GaN layers grown by high-temperature vapour phase epitaxy”, Phys. Stat. Sol., C 11 (2014), pp. 491–494
  • Funke C., Schmid E., Gärtner G., Reißenweber S., Fütterer W., Poklad A., Raabe L., Pätzold O., Stelter M.: “Impurities, inclusions, and dislocations in multicrystalline silicon grown from well-mixed and poorly mixed melts”, J. Cryst. Growth, 401 (2014), pp. 732–736
  • Wysokowski M., Motylenko M., Walter J., Lota G., Wojciechowski J., Stöcker H., Galli R., Stelling A.L., Himcinschi C., Niederschlag E., Langer E., Bazhenov V.V., Szatkowski T., Zdarta J., Pertenko I., Kljajić Z., Leisegang T., Molodtsov S.L., Meyer D.C., Jesionowski T., Ehrlich, H.: “Synthesis of nanostructured chitin-hematite composites under extreme biomimetic conditions”, RSC Advances, 4 (2014), pp. 61743–65752
  • Fankhänel, B., Stelter, M., Vogel, W., Klug, T.: “Optimisation of the properties of aluminium castings through the homogeneous distribution of micropores”, World of Metallurgy – Erzmetall 67 (2014) 5, pp. 277–286
  • Ohmann, S., Ditze, A., Scharf, C.: “Re-melting of Magnesium Chips”, World of Metallurgy – ERZMETALL 67 (2014) No. 6, pp. 330–338

2013

  • Stelter, M., Bombach, H.; Baumbach, J.: “Purer cathodes by new additives in copper electrorefining”, Proceedings of Copper, 5 (2013), pp. 565–576
  • Stelter M., Morgenstern G., Beimel B., Niederschlag E., Fischer M., Raabe L., Storch A., Gasch T., Riecke U.: “Improved resource utilisation and reduction of primary energy consumption in lead metallurgy”, in “Innovative Technologies for Resource Efficiency in Raw Material-Intensive Production Processes”, BMBF: Fraunhofer-Verlag, Karlsruhe (2013), pp. 68–81
  • Stelter, M., Niederschlag, E.: “Copper – Availability and Supply”, Erzmetall, 66 (2013) 2, pp. 81–85
  • Ehrig J., Stelter M., Bombach H., Morgenstern G., Scheel M.: “Extraction of Lithium from Zinnwaldite”, Proceedings EMC, 2 (2013), pp. 605–614
  • Scheel M., Stelter M.: “Recovery of Refractory Metals, Nickel and Cobalt from Spent Catalysts”, Proceedings EMC, 3 (2013), pp. 1239–1248
  • Bombach H., Kaden I., Stelter M., Schillinger W.: “Chemical De-tinning of Copper Alloys”, Galvanotechnik, 9 (2013), pp. 1762–1770
  • Dadzis K., Ehrig J., Niemietz K., Pätzold O., Wunderwald U., Friedrich J.: “Non-isothermal model experiments and numerical simulations for directional solidification of multicrystalline silicon in a travelling magnetic field”, J. Cryst. Growth, 372 (2013), pp. 145–156
  • Nauber R., Burger M., Büttner L., Dadzis K., Niemietz K., Pätzold O., Czarske J.: “Dual-plane flow mapping in a liquid-metal model experiment with a square melt in a travelling magnetic field”, Exp. Fluids, 54 (2013), pp. 1–11
  • Pätzold O., Niemietz K., Lantzsch R., Galindo V., Grants I., Bellmann M. P., Gerbet G.: “The use of magnetic fields in vertical Bridgman/Gradient Freeze-type crystal growth”, Europ. Phys. J. Special Topics, 220 (2013), pp. 243–257
  • Schmid E., Funke C., Behm T., Pätzold O., Berek H., Stelter M.: “Investigation of dislocation structures in ribbon- and ingot-grown multicrystalline silicon”, J. Cryst. Growth, 382 (2013), pp. 41–46
  • Wysokowsky M., Bazhenov V. V., Tsurkan M. V., Galli R., Stellin A. L., Stöcker H., Kaiser S., Niederschlag E., Gärtner G., Behm T., Ilan M., Petrenko A. Y., Jesionowski T., Ehrlich H.: “Isolation and identification of chitin in the three-dimensional skeleton of the marine sponge Aplysina fistularis”, International Journal of Biological Macromolecules, 62 (2013), pp. 94–100
  • Niederschlag E.: “Rare Earths – Availability, Production and Use” – In: Production and Recycling of Technology Metals, GDMB Series, 133 (2013), pp. 71–80
  • Ditze, A., Scharf, C.: Interaction between Nickel and Zirconium in liquid Magnesium, World of Metallurgy – ERZMETALL 66 (2013) No. 3, pp. 168–174
  • Scharf, C., Ditze, A.: Processing of agglomerated red filter dust in converter operations from a metallurgical perspective, Steel Research International 84 (2013) No. 9, pp. 917–925, DOI: https://doi.org/srin.201300126

2012

  • Stelter M., Bombach H., Pätzold O., Morgenstern G., Niederschlag E.: ‘The Institute of Nonferrous Metallurgy and Purest Materials. Resource-Efficient Materials Production’, ACAMONTA, Journal for Friends and Supporters of the TU BAF, 19 (2012), pp. 41–45
  • Stelter M., Bombach, Morgenstern G., Niederschlag E.: “Energy Efficiency in Metallurgy”, GDMB Series, Issue 129 (2012)
  • Stelter M., Morgenstern G., Beimel B., Zeidler O.: “Separation of Tin during the Recycling of Lead-Acid Batteries”, Chemie Ingenieur Technik, 84 (2012) 10, pp. 1762–1765
  • Nikrityuk P., Pätzold O., Stelter M.: “A fixed grid method for transient simulations of dopant segregation in VGF-RMF growth”, Cryst. Growth, 339 (2012), pp. 75–85.
  • Lukin G., Röder C., Niederschlag E., Shashev Y., Mühle U., Pätzold O., Kortus J., Rafaja D., Stelter M.: “Nucleation of GaN on sapphire substrates at intermediate temperatures by hydride vapour phase epitaxy”, Cryst. Res. Technol., 47 (2012), pp. 121–130
  • Schmid E., Würzner S., Funke C., Behm T., Helbig R., Pätzold O., Berek H., Stelter M.: “The correlation between spatial alignment of dislocations, grain orientation, and grain boundaries in multicrystalline silicon”, Cryst. Res. Technol., 47 (2012), pp. 229–236
  • Schmid E., Würzner S., Funke C., Galindo V., Pätzold O., Stelter M.: “The Effect of the Growth Rate on the Microstructure of Multi--crystalline Silicon”, J. Cryst. Growth, 359 (2012), pp. 77-82
  • Bombach H., Stelter M.: “Chemical and electrochemical behaviour of various additives in copper refining electrolysis”, Erzmetall, 65 (2012), pp. 94–100
  • Galindo V., Niemietz K., Pätzold O., G. Gerbeth G.: “Numerical and experimental modelling of VGF-type buoyant flow under the influence of travelling and rotating magnetic fields”, J. Cryst. Growth, 360 (2012), pp. 30–34

2011

  • Niemietz K., Galindo V., Pätzold O., Gerbeth G., Stelter M.: ‘Flow modelling with relevance to vertical gradient freeze crystal growth under the influence of a travelling magnetic field’, J. Cryst. Growth, 318 (2011), pp. 150–155
  • Raabe L., Pätzold O., Kupka I., Ehrig J., Würzner S., Stelter M.: “The effect of graphite components and crucible coating on the behaviour of carbon and oxygen in multicrystalline silicon”, J. Cryst. Growth, 318 (2011), pp. 234–238
  • Stelter M., Bombach H., Niederschlag E.: “Comparison of production processes for primary magnesium”, Erzmetall, 64 (2011) 3, pp. 151–156
  • Dadzis K., Ehrig J., Niemietz K., Pätzold O., Wunderwald U., Friedrich J.: “Model experiments and numerical simulations for directional solidification of multicrystalline silicon in a travelling magnetic field”, J. Cryst. Growth, 333 (2011), pp. 7–15
  • Kutzner J., Kortus J., Pätzold O., Wunderwald U., Irmer G.: “Phonons in SiAs: Raman scattering study and DFT calculations”, J. Raman Spectrosc., 42 (2011), pp. 2132–2136

2010

  • Scheel M., Stelter M.: “Recycling of secondary raw materials containing refractory metals”, Issue 121 of the GDMB series, (2010)
  • Stelter M., Bombach H.: “Copper electrorefining at high current densities”, Proceedings of Copper, 4 (2010), pp. 1675–1686
  • Stelter M., Bombach H., Raabe L., Häuser V.: “Copper refining in nitrate solutions”, Proceedings of Copper, 4 (2010), pp. 1687–1698
  • Raabe L., Ehrig J., Würzner S., Pätzold O., Stelter M., Möller H.-J.: ‘The behaviour of carbon in the growth of multicrystalline silicon from an induction-heated melt’, Diffusion and Defect Data, Pt. B: Solid State Phenomena, 156–158 (2010), pp. 49–54
  • Bellmann M.P., Pätzold O., Stelter M., Möller H.-J.: “Optimisation of the VGF growth process by inverse modelling”, J. Cryst. Growth, 312 (2010), pp. 2175–2178
  • Langheinrich D., Pätzold O., Raabe L., Stelter M.: “VGF growth of germanium single crystals without crucible contact”, J. Cryst. Growth, 312 (2010), pp. 2291–2296
  • Buhrig E., Jurisch M., Korb J., Pätzold O.: “Thermodynamic modelling of crystal growth processes”, in *Crystal Growth Technology: Semiconductors & Dielectrics*, eds. P. Capper and P. Rudolph, Wiley-VCH, Weinheim, (2010), pp. 3–25

2009

  • Stelter M.: “Aluminium – much more than just a metal”, Ingenieur Spiegel 2 (2009), p. 74
  • Niederschlag, E., Stelter, M.: “145 Years of Indium – A Metal with a Future?”, Erzmetall, 62 (2009) 20091, pp. 17–22
  • Raabe L., Stelter M., Bombach H.: “Improvement of the pickling process in the production of tinplate”, Proceedings EMC, 1 (2009), pp. 345–354
  • Bellmann M. P., Pätzold O., Gärtner G., Möller H. J., Stelter M.: “Radial segregation in VGF-RMF grown germanium”, J. Cryst. Growth, 311 (2009), pp. 1471–1474
  • Hinze M., Pätzold O., Ziegenbalg S.: “Solidification of a GaAs melt – Optimal control of the phase interface”, J. Cryst. Growth, 311 (2009), pp. 2501–2507
  • Barmin I. V., Senchenkov A.S., Greif A., Pätzold O., Wunderwald U., Cröll A., Mitric A.: “Application of rotating magnetic fields to crystal growth under microgravity (experiments on FOTON-M3)”, *Magnetohydrodynamics*, 45 (2009), pp. 325–332

2008

  • Bombach H., Stelter M., Feldmann T., Sauer R., Oberhoffer H.: “Influence of passivation processes on the properties of tin-plated steel sheet”, Metall 5 (2008), pp. 286–291
  • Stelter M., Bombach H., Saltykov P., Eulitz I.: “Effect of cooling rate on the microstructure and corrosion behaviour of PbAg alloys”, Prakt. Metallogr. 45 (2008) 6, pp. 298–301
  • Stelter M., Bombach H.: “Increasing the current density in copper refining electrolysis”, Tsvetnye metalli 4 (2008), pp. 23–28
  • Stelter M., Morgenstern G.: “Behaviour of heat-resistant steels in lead slag”, World of Metallurgy – Erzmetall, 61 (2008) 4, pp. 235–242
  • Stelter M.: ‘Recycling strategies using electronic waste as an example’, GDMB Series, Issue 115 (2008), pp. 53–68.
  • Lantzsch R., Galindo V., Pätzold O., Stelter M., Gerbeth G.: “Vertical Gradient Freeze Growth with External Magnetic Fields”, J. Cryst. Growth, 310 (2008), pp. 1518–1522

2007

  • Stelter, M., Hirt T., Woidasky J., Eyerer P.: ‘Sustainable Raw Material-Based Production’, Fraunhofer IRB-Verlag, 2007, pp. 9–83
  • Stelter, M., Morgenstern, G.: “Investigations into the Possibilities for Cleaning Aluminium Bronze for the Recycling of Cast Alloys”, Metall, 61 (2007), pp. 548–553
  • Bellmann M. P., Pätzold O., Wunderwald U., Stelter M., Möller H. J.: “Time-dependent numerical simulation of the VGF process with a rotating magnetic field”, J. Cryst. Growth, 303 (2007), p. 250
  • Lantzsch R., Galindo V., Grants I., Zhang C., Pätzold O., Gerbeth G., Stelter M.: “Experimental and numerical results on the fluid flow driven by a travelling magnetic field”, J. Cryst. Growth, 305 (2007), pp. 249–256
  • Bellmann M. P., Pätzold O., Wunderwald U., Stelter M., Möller H. J.: “Time-dependent numerical simulation of the VGF process with a rotating magnetic field” J. Cryst. Growth, 303 (2007), pp. 250–252
  • Galindo V., Grants I., Lantzsch R., Pätzold O., Stelter M.: “Numerical and experimental modelling of the melt flow in a travelling magnetic field for vertical gradient freeze growth”, J. Cryst. Growth, 303 (2007), pp. 258–261
  • Stelter M., Bombach H.: “Fundamentals and effects of additives in copper electrorefining”, Cu2007 – Volume V (2007), edited by G. Houlachi, J.D. Edwards, T.G. Robinson, Canadian Institute of Mining, Metallurgy and Petroleum, pp. 575–586

2006

  • Mishina O., Stelter M., Bombach H., Niederschlag E.: ‘Separation of halides from alkaline process solutions in hydrometallurgical zinc extraction – Part 2: Separation by nanofiltration’, Erzmetall, 59 (2006) 1, pp. 19–25
  • Lantzsch R., Grants I., Galindo V., Pätzold O., Gerbeth G., Stelter M., Cröll A.: “Fluid Flow Analysis and Vertical Gradient Freeze Crystal Growth in a Travelling Magnetic Field”, Magnetohydrodynamics, 42 (2006), pp. 445–449

2005

  • Stelter M., Bombach H., Saltykov P.: “Use of lead-alloy anodes in metal extraction electrolysis”, BHM, 150 (2005) 1, pp. 1–5
  • Mishina O., Stelter M., Bombach H., Niederschlag E.: “Separation of halides from alkaline process solutions in hydrometallurgical zinc extraction, Part 1: State of the art and ion exchange processes”, Erzmetall, 58 (2005) 6, pp. 329–336
  • Stelter M., Vogel W., Jablonski, K.: “Refining of aluminium bronze with refining agents”, Metall, 59 (2005) 5, pp. 272–276
  • Pätzold O., Jenkner K., Scholz S., Cröll A.: “Detached growth behaviour of 2-in germanium crystals”, J. Cryst. Growth, 277 (2005), pp. 37–43

2004

  • Stelter M., Bombach H.: “Process Optimisation in Copper Electrorefining”, Advanced Engineering Materials, 6 (2004), pp. 558–562
  • Bellmann M., Pätzold O., Wunderwald U.: “Axial macrosegregation in Ga-doped germanium grown by the vertical gradient freeze technique with a rotating magnetic field”, Cryst. Res. Technol., 39 (2004), pp. 195–199
  • Pätzold O., Wunderwald U., Bellmann M., Gumprich P., Buhrig E., Cröll A.: “New Developments in Vertical Gradient Freeze Growth”, Adv. Eng. Mat., 6 (2004), pp. 554–557

2003

  • Bombach H., Stelter M., Mohr K.-P., Etzold U., Rouminatsev V.: “Use of lead-alloy anodes in high-current electrolysis”, Metall, 57 (2003), pp. 386–391

2002

  • Orhan G., Arslan C., Bombach H., Stelter M.: “Nickel Recovery from Rinse Waters of Plating Baths”, Hydrometallurgy, 65 (2002), pp. 1–8.
  • Stelter M., Bombach H., Nesterov N.: “Using Polyethylene Glycols as Alternative Inhibitors in Copper Electrorefining”, Journal of Metals, 54 (2002), pp. 32–36.
  • Stelter M., Bombach H., Khaled A.S.E: “Oxidative Leaching of Copper Cable Granules”, Erzmetall, 55 (2002) 7, pp. 360 – 365
  • Pätzold O., Gärtner G., Irmer G.: “Boron Site Distribution in Doped GaAs”, Phys. Stat. Sol. (b), 232 (2002), pp. 314–322
  • Pätzold O., Grants I., Wunderwald U., Jenkner K., Cröll A., Gerbeth G.: “Vertical Gradient Freeze Growth of GaAs with a Rotating Magnetic Field”, J. Cryst. Growth, 245 (2002), pp. 237–246
  • Pätzold O., Fischer B., Cröll A.: “Melt Flow and Species Transport in µg-Gradient-Freeze Growth of Germanium”, Cryst. Res. Technol., 37 (2002), pp. 1058–1065
  • Stelter M., Bombach H., Vollbrecht J., Knechtel W.: “Rinsing Processes in Electroplating”, GDMB Series, Issue 95 Process Water/Wastewater/Cooling Water, (2002), pp. 105–125

2001

  • Krause H., Pätzold O., Wunderwald U., Hermann M.: “Thermally optimised furnace for the growth of single-crystalline semiconductors by the Vertical Gradient Freeze technique”, Electro Heat International, 4 (2001), pp. 142–148
  • Stelter M., Bombach H.: “Cooper Electrorefining – State of the Art and Perspectives”, Erzmetall, 54 (2001) 9, pp. 432–438
  • Bombach H., Lange H.-J., Stelter M.: “Lead”, Encyclopaedia of Natural Sciences and Technology, Ecomed Verlag, 6th Supplement 2/01

2000

  • Bombach H., Khaled A.S.E, Stelter M.: ‘Investigations into the oxidative leaching of copper cable granules in sulphuric acid’, Erzmetall, 53 (2000) 4, pp. 222–227
  • Stelter M., Bombach H.: “Copper Refining Electrolysis – State of the Art and Prospects”, GdCh Monograph, Volume 18 (2000), pp. 14–23
  • Buhrig E., Schwichtenberg G., Pätzold O.: “Growth of Zn-doped Germanium under Microgravity”, Cryst. Res. Technol., 35 (2000), pp. 911–919