2026

  • Pan, L., Liu, X., Li, Y., Chen, Y., liao, N., Hu, Y., Konietzky, H. (2026): Thermo-mechanical modeling for enhanced thermal shock resistance in alumina-spinel castables, Journal of the American Ceramic Society, 109:e70912
  • Wang, F., Meng, D., Konietzky, H., Gerolymatou, E., Glover, P.W.J., He, B.G. (2026): A discrete element approach for simulating progressive fracturing in geothermal reservoirs via a new cohesive crack model, Computers and Geotechnics, 192: 107908

2025

  • K. Keller, E. Brendler und T. Schlothauer: „Shock wave formation of defective rocksalt aluminium oxynitride rs-Al(O,N) from (Si-)Al-O-N polytypoids“. Journal of Alloys and Compounds 1018 (2025), S. 179123.
  • Tao, K., Konietzky, H., Gao, F., Wu, R., Dang, W., Li, C., Liu, Y. (2025): Stick-slip friction and surface contact density of bare granite joint affected by cyclic normal stress, Rock Mechanics Rock Engineering, 10.1007/s00603-025-05121-3
  • Liao, J., Jiang, Z., Ouyang, Y., Konietzky, H., Yang, X., Liu, Y., Liu, H., Tian, X. (2025): Numerical investigation on thermodynamic features and exergy efficiency of man-made caverns for CAES, Thermal Science and Engineering Progress, 68: 104305
  • Xing, C., Zhang, M., Tiedtke, F., Konietzky, H., Liu, Q., Wang, F. (2025): How different parameters influence the efficiency of heat extraction using deep petrothermal multi-frac systems for central heating purposes, GeoEnergy Communications, 1:8
  • Tao, K., Dang, W., Konietzky, H., Pan, Y., Liu, Y. (2025): Frictional sliding behavior of rock joints under cyclic normal stress: Insight from spring-block model coupled with rate and state friction framework, Tribology International, 214: 111163
  • Tao, K., Dang, W., Konietzky, H., Liu, Y., Zhang, W., Li, X. (2025): Velocity effects on slip evolution of faults subjected to constant and cyclic normal stress derived from laboratory tests, Rock Mechanics Bulletin, 4: 100190
  • Dai, Y., Zhang, J., Wu, H., Storti, E., Hubalkova, J., Bai, Q., Konietzky, H., Aneziris, C.G. (2025): Thermo-mechanical damage of AL2O3-C reticulated porous ceramic and effect of functional coatings, J. European Ceramic Society, 45: 117174

2024

  • Finenko, M., Konietzky, H. (2024): Numerical simulation of turbulent fluid flow in rough rock fractures: 3D case, Rock Mech. Rock Eng., 57: 2297-2323
  • Zhang, G., Konietzky, H., Fruehwirt, T. (2024): Experimental investigation of abrasive potential and drilling efficiency at elavated temperatures via Cerchar rock scratching, Geomech. Geophys. Geo-energ. Geo-ressour., 10:120
  • De Silva, V.R.S., Konietzky, H., Ranjith, P.G., Manatungs, U.I. (2024): Strain energy dependend numerical simulation of rock fracture initiation and propagation using soundless cracking demolition agants (SCDA): Effects of SCDA-filled rock joints, Int. J. Rock Mech. Min. Sci., 177: 105740
  • Bai, Q., Friedel, M., Konietzky, H. (2024): Experimental investigation of stress unloading effects on rock damage and confining pressure-dependent crack initiation stress of porous sandstone under true triaxial stress environments, Rock Mechanics Bulletin, 3: 100111  
  • Wang, F., Pang, R., Konietzky, H., Hu, K., He, B.-G., Meng, D.H., Ismael, M. (2024): Temperature driven real-time weakening and strengthening mechanisms of unconfined granite, Geothermics,199: 102973
  • Wan, F., Jiang, J., Tian, X., Konietzky, H., Xiao, Z. (2024): A thermo-hydro-mechanical damage model for lined rock cavern for compressed air energy storage, Journal of Energy Storage, 78: 110186

2023

  • Dai, Y., Zhu, H., Zu, Q., Wang, F. Liao, N., Li, Y., Konietzky, H., Aneziris, C. (2023): Impact of fast heating and cooling on the mechanical behaviour of alumina-magneis refractory castables, Ceramics international, doi.org/10.1016/j.ceramint.2023.08.334
  • Wang, F., Konietzky, H.,  Pang, R.,  Zou, Y.,  Pang, B., Ismael, M. (2023): Grain Based Discrete Element Modeling of Thermo Mechanical Response of Granite under Temperature, Rock Mech. Rock Eng., 56: 5009 – 5027
  • Wang, P., Yin, T., Li, X., Konietzky, H. (2023): Quasi-Static and Dynamic Tensile Behavior of Water-Bearing Sandstone Subjected to Microwave Irradiation. Mathematics, 11 (1), 203

2022

  • Sun, H., Ma, L., Konietzky, H., Yuanyuan, D., Wang, F. (2022): Characteristics and generation mechanisms of key infrared radiation signals during damage evolution in sandstone. Acta Geotechnica, 17: 1753-1763
  • M. H. Wetzel, M. J. Kriegel, C. Schimpf, A. Leineweber: "Thermodynamic description of high-pressure phase equilibria in the Fe-N system".J. Alloy. Compd. 914, (2022). 10.1016/j.jallcom.2022.165304

2021

  • M. J. Kriegel, M.H. Wetzel, A. Treichel, O. Fabrichnaya, D. Rafaja: "Binary Ti-Fe system. Part I: Experimental investigation at high pressure". Calphad 74, (2021). 10.1016/j.calphad.2021.102322
  • M. H. Wetzel, T. T. Rabending, M. Friàk, M. Všianská, M. Šob und A. Leineweber: "Phase stability of iron nitride Fe4N at high pressure — Pressure dependent evolution of phase equilibria in the Fe-N system", Materials 14, (2021). 10.3390/ma14143963
  • T. Frühwirt, D. Pötschke und H. Konietzky: „Simulation of direct shear tests using a forces on fracture surfaces (FFS) approach“. Environmental Earth Sciences 80 (2021), S. 312. 10.1007/s12665-021-09606-6
  • M. Finenko und H. Konietzky: „Hausdorff Distance as a 3D Fracture Aperture Metric“. Rock Mechanics and Rock Engineering 54 (2021), S. 2355–2367. 10.1007/s00603-021-02367-5

2020

  • B. B. Straumal, A. R. Kilmametov, A. A. Mazilkin, A. S. Gornakova, O. B. Fabrichnaya, M. J. Kriegel, D. Rafaja, M. F. Bulatov, A. N. Nekrasov und B. Baretzky: „Formation of the ω Phase in the Titanium—Iron System under Shear Deformation“. Soviet Journal of Experimental and Theoretical Physics Letters 111 (2020), S. 568–574. 10.1134/S0021364020100033
  • M. Olbrich, T. Pflug, C. Wüstefeld, M. Motylenko, S. Sandfeld, D. Rafaja und A. Horn: „Hydrodynamic modeling and time-resolved imaging reflectometry of the ultrafast laser-induced ablation of a thin gold film“. Optics and Lasers in Engineering 129 (2020), S. 106067. 10.1016/j.optlaseng.2020.106067
  • H.-T. Luu, R. J. Ravelo, M. Rudolph, E. M. Bringa, T. C. Germann, D. Rafaja und N. Gunkelmann: „Shock-induced plasticity in nanocrystalline iron: Large-scale molecular dynamics simulations“. Phys. Rev. B 102 (2020), S. 020102. 10.1103/PhysRevB.102.020102
  • M.J. Kriegel, M. Rudolph, Al. Kilmametov, B. B. Straumal, J. Ivanisenko, O. Fabrichnaya, H. Hahn und D. Rafaja: "Formation and Thermal Stability of ω-Ti(Fe) in α-Phase-Based Ti(Fe) Alloys." Metals 10 (2020). 10.3390/met10030402
  • J. Hornung, T. Gottschall, L. Opherden, M. Antlauf, M. Schwarz, E. Kroke, T. Herrmannsdörfer und J. Wosnitza: „Splitting of the magnetic monopole pair-creation energy in spin ice“. Journal of Physics: Condensed Matter 32 (2020), 10.1088/1361-648x/ab9054
  • W. Dang, H. Konietzky, T. Frühwirt und M. Herbst: „Cyclic Frictional Responses of Planar Joints Under Cyclic Normal Load Conditions: Laboratory Tests and Numerical Simulations“. Rock Mechanics  and Rock Engineering 53 (2020), S. 337–364. 10.1007/s00603-019-01910-9

2019

  • M. Wetzel, M. Schwarz und A. Leineweber: „High-pressure high-temperature study of the pressure induced decomposition of the iron nitride γ'-Fe4N“. Journal of Alloys and Compounds 801 (2019), S. 438–448. 10.1016/j.jallcom.2019.06.078
  • T. Stöter, M. Antlauf, L. Opherden, T. Gottschall, J. Hornung, J. Gronemann, T. Herrmannsdörfer, S. Granovsky, M. Schwarz, M. Doerr, H.-H. Klauss, E. Kroke und J. Wosnitza: „Tuning the interactions in the spin-ice materials Dy2Ge2-xSixO7 by silicon substitution“. Physical Review B 100 (2019). 10.1103/physrevb.100.054403
  • C. Schimpf, M. Schwarz, C. Lathe, E. Kroke und D. Rafaja: „Effect of the microstructure of graphitic boron nitride on the kinetics of the formation of boron nitride high-pressure phases“. Journal of the European Ceramic Society 39 (2019), S. 944–951.10.1016/j.jeurceramsoc.2018.10.021
  • A. Hänel, M. Hasterok, A. Nestler, M. Schwarz, A. Brosius und E. Kroke: "Technological investigation of binderless nanocrystalline cubic boron nitride (BNNC) as cutting material for groove turning of hardened steels". IOP Conf. Ser.: Mater.Sci.Eng. 564 (2019). 10.1088/1757-899X/564/1/012004
  • A. S. Savinykh, I. A. Cherepanov, S. V. Razorenov, K. Mandel und L. Krüger: „Elastic Precursor Decay and Spallation in Nonporous Tungsten Carbide Ceramics“. Technical Physics 64 (2019), S. 356–360. 10.1134/S1063784219030216
  • K. Keller, S. Rösler, T. Schlothauer, G. Heide und E. Kroke: „Shock synthesis of Sr2Si5N8:Eu2+ phosphor“. Journal of Alloys and Compounds 784 (2019), S. 1270–1275. 10.1016/j.jallcom.2019.01.040
  • W. Dang, W. Wu, H. Konietzky und J. Qian: „Effect of shear-induced aperture evolution on fluid flow in rock fractures“. Computers and Geotechnics 114 (2019), S. 103152. 10.1016/j.compgeo.2019.103152
  • M. Antlauf, T. Taniguchi, J. Wagler, M. R. Schwarz und E. Kroke: „Synthesis of Large Rare Earth Element Germanate Pyrochlore Single Crystals at High Pressure“. Crystal Growth & Design 19 (2019), S. 5538–5543. 10.1021/acs.cgd.9b00333

2018

  • M. J. Kriegel, A. Kilmametov, M. Rudolph, B. B. Straumal, A. S. Gornakova, H. Stöcker, Y. Ivanisenko, O. Fabrichnaya, H. Hahn und D. Rafaja: „Transformation Pathway upon Heating of Ti–Fe Alloys Deformed by High-Pressure Torsion“. Advanced Engineering Materials 20 (2018), S. 1700933. 10.1002/adem.201700933
  • A. Hänel, M. Hasterok, M. Schwarz, C. Schimpf, A. Nestler, A. Brosius und E. Kroke: „Investigation on the grinding characteristics of binderless nanocrystalline cubic boron nitride (BNNC) as cutting material for the machining of hardened steels and superalloys“. CRIP 11 (2018), S. 493–496. 10.1016/j.procir.2018.08.257
  • A. Kilmametov, Y. Ivanisenko, A. Mazilkin, B. Straumal, A. Gornakova, O. Fabrichnaya, M. Kriegel, D. Rafaja und H. Hahn: „The α→ω and β → ω phase transformations in Ti–Fe alloys under high-pressure torsion“. Acta Materialia 144 (2018), S. 337–351. 10.1016/j.actamat.2017.10.051
  • R. Eckner, L. Krüger, M. Motylenko, A. S. Savinykh, S. V. Razorenov und G. V. Garkushin: „Deformation mechanisms and microplasticity of austenitic TRIP/TWIP steel under flyer plate impact“. EPJ Web Conf. 183 (2018), S. 03007. 10.1051/epjconf/201818303007
  • W. Dang, H. Konietzky, L. Chang und T. Frühwirt: „Velocity-frequency-amplitude-dependent frictional resistance of planar joints under dynamic normal load (DNL) conditions“. Tunnelling and Underground Space Technology 79 (2018), S. 27–34. 10.1016/j.tust.2018.04.038

2017

  • M. Radajewski, C. Schimpf und L. Krüger: „Study of processing routes for WC-MgO composites with varying MgO contents consolidated by FAST/SPS“. Journal of the European Ceramic Society 37 (2017), S. 2031–2037. 10.1016/j.jeurceramsoc.2017.01.005
  • M. J. Kriegel, A. Kilmametov, V. Klemm, C. Schimpf, B. B. Straumal, A. S. Gornakova, Y. Ivanisenko, O. Fabrichnaya, H. Hahn und D. Rafaja: „Thermal Stability of Athermal ω-Ti (Fe) Produced upon Quenching of β-Ti (Fe)“. Advanced Engineering Materials 21 (2017), S. 1800158. 10.1002/adem.201800158
  • A. Kilmametov, Y. Ivanisenko, B. Straumal, A. Mazilkin, A. Gornakova, M. Kriegel, O. Fabrichnaya, D. Rafaja und H. Hahn: „Transformations of α' martensite in Ti–Fe alloys under high pressure torsion“. Scripta Materialia 136 (2017), S. 46–49. 10.1016/j.scriptamat.2017.04.010
  • W. Dang, H. Konietzky, M. Herbst und T. Frühwirt: „Complex analysis of shear box tests with explicit consideration of interaction between test device and sample“. Measurement 102 (2017), S. 1–9. 10.1016/j.measurement.2017.01.040
  • J. Heinrich, M. Schwarz und G. Heide: „Synthesis of sphalerite different ways to obtain chemically pure and doped materials“. (2017) Bd. Supplement 37.
  • W. Dang, H. Konietzky und T. Frühwirt: „Direct Shear Behavior of Planar Joints Under Cyclic Normal Load Conditions: Effect of Different Cyclic Normal Force Amplitudes“. Rock Mechanics and Rock Engineering 50 (2017), S. 3101–3107. 10.1007/s00603-017-1270-7
  • W. Dang, T. Frühwirt und H. Konietzky: „Behaviour of a plane joint under horizontal cyclic shear loading“. Geomechanics and Engineering 13 (2017).  S. 809–823. 10.12989/gae.2017.13.5.809

2016

  • T. Schlothauer, C. Schimpf, M. R. Schwarz, G. Heide und E. Kroke: „The role of decompression and micro-jetting in shock wave synthesis experiments“. Journal of Physics: Conference Series 774 (2016), S. 012053. 10.1088/1742-6596/774/1/012053
  • C. Schimpf, H. Schumann, J. Räthel, M. Herrmann und D. Rafaja: „High-temperature stability of microstructure defects in graphitic boron nitride subjected to the field assisted sintering“. Journal of the European Ceramic Society 36 (2016), S. 43–49. 10.1016/j.jeurceramsoc.2015.09.006
  • J. Heinrich, M. Schwarz und G. Heide: „Elimination of wurtzitic stacking faults and indium-doping in sphalerite ZnS by melt-freeze at HP/HT conditions“. (2016) Bd. Supplement 36.
  • M. Radajewski, S. Henschel, S. Grützner, L. Krüger, C. Schimpf, D. Chmelik und D. Rafaja: „Microstructure and mechanical properties of bulk TiN–AlN composites processed by FAST/SPS“. Ceramics International 42 (2016), S. 10220–10227. 10.1016/j.ceramint.2016.03.143
  • M. Mezzetti, M. Radajewski, M. Reich und L. Krüger: „FAST Materials for Rock Destruction Applications“. Nanoscience and Nanotechnology 6 (2016), S. 77–82. 10.5923/c.nn.201601.15
  • L. Guan, M. Schwarz, R. Zhang und E. Kroke: „Polymer-precursor-derived (am-) SiC/TiC composites for resistive heaters in large volume multi-anvil high pressure/high-temperature apparatus“. High Pressure Research 36 (2016), S. 167–186. 10.1080/08957959.2016.1164857
  • R. Eckner, B. Reichel, A. S. Savinykh, L. Krüger, S. V. Razorenov und G. V. Garkushin: „Microstructure of CrMnNi Cast Steel After Explosive-Driven Flyer-Plate Impact at Room Temperature and Below“. Metallurgical and Materials Transactions A 47 (2016), S. 75–83. 10.1007/s11661-015-3222-8
  • R. Eckner, L. Krüger, C. Ullrich, D. Rafaja, T. Schlothauer und G. Heide: „Microstructure and Mechanical Properties After Shock Wave Loading of Cast CrMnNi TRIP Steel“. Metall and Mat Trans A. 47 (2016), S. 4922–4932.
    10.1007/s11661-016-3688-z
  • W. Dang, H. Konietzky und T. Frühwirt: „Rotation and stress changes on a plane joint during direct shear tests“. International Journal of Rock Mechanics and Mining Sciences 89 (2016), S. 129–135. 10.1016/j.ijrmms.2016.09.004
  • W. Dang, H. Konietzky und T. Frühwirt: „Direct shear behavior of a plane joint under dynamic normal load (DNL) conditions“. Engineering Geology 213 (2016), S. 133–141. 10.1016/j.enggeo.2016.08.016
  • S. Ackermann, S. Martin, M. Schwarz, C. Schimpf, D. Kulawinski, C. Lathe, S. Henkel, D. Rafaja, H. Biermann und A. Weidner: „Investigation of Phase Transformations in High-Alloy Austenitic TRIP Steel Under High Pressure (up to 18 GPa) by In Situ Synchrotron X-Ray Diffraction and Scanning Electron Microscopy“. Metallurgical and Materials Transactions A 47 (2016), S. 95–111.
    10.1007/s11661-015-3082-2

2015

  • T. Schlothauer, C. Schimpf, E. Brendler, K. Keller, E. Kroke und G. Heide: „Halide based shock-wave treatment of fluid-rich natural phases“. Journal of Physics: Conference Series 653 (2015), S. 012033. 10.1088/1742-6596/653/1/012033
  • C. Schimpf, M. Schwarz, C. Lathe, E. Kroke und D. Rafaja: „Corrugations of the basal planes in hexagonal boron nitride and their impact on the phase transition to cubic boron nitride“. Powder Diffraction 30 (2015), S90–S96. 10.1017/S0885715615000044
  • L. Krüger, K. Mandel, R. Krause und M. Radajewski: „Damage evolution in WC–Co after repeated dynamic compressive loading detected by eddy current testing“. International Journal of Refractory Metals and Hard Materials 51 (2015), S. 324–331. 10.1016/j.ijrmhm.2015.05.005
  • A. Köhler, T. Schlothauer, C. Schimpf, V. Klemm, M. Schwarz, G. Heide, D. Rafaja und E. Kroke: „The role of oxygen in shockwave-synthesized γ-Si3N4 material“. Journal of the European Ceramic Society 35 (2015), S. 3283–3288. 10.1016/j.jeurceramsoc.2015.05.009
  • K. Keller, E. Brendler, S. Schmerler, C. Röder, G. Heide, J. Kortus und E. Kroke: „Spectroscopic Characterization of Rocksalt-Type Aluminum Nitride“. The Journal of Physical Chemistry C 119 (2015), S. 12581–12588. 10.1021/acs.jpcc.5b02187
  • U. Bläß, T. Barsukova, M. Schwarz, A. Köhler, C. Schimpf, I. Petrusha, U. Mühle, D. Rafaja und E. Kroke: „Bulk titanium nitride ceramics – Significant enhancement of hardness by silicon nitride addition, nanostructuring and high pressure sintering“. Journal of the European Ceramic Society 35 (2015), S. 2733–2744. 10.1016/j.jeurceramsoc.2015.04.005

2014

  • M. R. Schwarz, M. Antlauf, S. Schmerler, K. Keller, T. Schlothauer, J. Kortus, G. Heide und E. Kroke: „Formation and properties of rocksalt-type AlN and implications for high pressure phase relations in the system Si–Al–O–N“. High Pressure Res. 34 (2014), S. 22–38. 10.1080/08957959.2013.857020
  • V.-M. Nguyen, H. Konietzky und T. Frühwirt: „New Methodology to Characterize Shear Behavior of Joints by Combination of Direct Shear Box Testing and Numerical Simulations“. Geotechnical and Geological Engineering 32 (2014), S. 829–846.
    10.1007/s10706-014-9761-8
  • T. Schlothauer, C. Schimpf, G. Heide, E. Kroke und D. Rafaja: „Behavior of Copper Powder in shock synthesis experiments“. (2014).
  • K. Mandel, M. Radajewski und L. Krüger: „Strain-rate dependence of the compressive strength of WC–Co hard metals“. Materials Science and Engineering: A 612 (2014), S. 115–122. 10.1016/j.msea.2014.06.020
  • K. Mandel, L. Krüger und C. Schimpf: „Study on parameter optimisation for field-assisted sintering of fully-dense, near-nano WC–12Co“. International Journal of Refractory Metals and Hard Materials 45 (2014), S. 153–159. 10.1016/j.ijrmhm.2014.04.009
  • K. Mandel, L. Krüger und C. Schimpf: „Particle properties of submicron-sized WC–12Co processed by planetary ball milling“. International Journal of Refractory Metals and Hard Materials 42 (2014), S. 200–204. 10.1016/j.ijrmhm.2013.09.006
  • K. Mandel, L. Krüger, R. Krause und M. Radajewski: „The influence of stress state on the compressive strength of WC–Co with different Co contents“. International Journal of Refractory Metals and Hard Materials 47 (2014), S. 124–130. 10.1016/j.ijrmhm.2014.07.011
  • I. Lyagov, N. Vasilev, M. Reich und M. Mezzetti: „Analytical research and experimental tests on the technology fov drilling small diameter channels with small radius of cuvature“. Oil Gas European Magazine 40 (2014), S. 124–129. Lyagov et al.
  • T. D. Boyko, T. Gross, M. Schwarz, H. Fuess und A. Moewes: „The local crystal structure and electronic band gap of β-sialons“. Journal of Materials Science 49 (2014), S. 3242–3252. 10.1007/s10853-014-8030-9

2013

  • C. Schimpf, M. Motylenko und D. Rafaja: „Quantitative description of microstructure defects in hexagonal boron nitrides using X-ray diffraction analysis“. Materials Characterization 86 (2013), S. 190–199.  10.1016/j.matchar.2013.09.011
  • C. Loose und J. Kortus: „Systematic study of the influence of different equations of states on the calculation of elastic propertiesy“. High Pressure Research 33 (2013), S. 622–632. 10.1080/08957959.2013.806657
  • M. F. Bekheet, M. R. Schwarz, M. M. Müller, S. Lauterbach, H.-J. Kleebe, R. Riedel und A. Gurlo: „Phase segregation in Mn-doped In2O3: in situ high-pressure high-temperature synchrotron studies in multi-anvil assemblies“. RSC Adv. 3 (2013), S. 5357–5360. 10.1039/C3RA22998J
  • M. F. Bekheet, M. R. Schwarz, S. Lauterbach, H.-J. Kleebe, P. Kroll, A. Stewart, U. Kolb, R. Riedel und A. Gurlo: „In situ high pressure high temperature experiments in multi-anvil assemblies with bixbyite-type In2O3 and synthesis of corundum-type and orthorhombic In2O3 polymorphs“. High Pressure Research 33 (2013), S. 697–711. 10.1080/08957959.2013.834896
  • M. F. Bekheet, M. R. Schwarz, S. Lauterbach, H.-J. Kleebe, P. Kroll, R. Riedel und A. Gurlo: „Orthorhombic In2O3: A Metastable Polymorph of Indium Sesquioxide“. Angewandte Chemie International Edition 52 (2013), S. 6531–6535. 10.1002/anie.201300644
  • S. Bahmann, T. Weißbach und J. Kortus: „Crossed graphene: Stability and electronic structure“. physica status solidi (RRL) – Rapid Research Letters 7 (2013), S. 639–642. 10.1002/pssr.201307226
  • S. Bahmann und J. Kortus: „EVO—Evolutionary algorithm for crystal structure prediction“. Computer Physics Communications 184 (2013), S. 1618–1625. 10.1016/j.cpc.2013.02.007

2012

  • S. B. Schneider, D. Baumann, A. Salamat, Z. Konôpková, H.-P. Liermann, M. R. Schwarz, W. Morgenroth, L. Bayarjargal, A. Friedrich, B. Winkler und W. Schnick: „Materials Properties of Ultra-Incompressible Re2P“. Chem. Mater. 24 (2012), S. 3240–3246. 10.1021/cm3016885
  • D. Rafaja, C. Wüstefeld, M. Motylenko, C. Schimpf, T. Barsukova, M. R. Schwarz und E. Kroke: „Interface phenomena in (super)hard nitride nanocomposites: from coatings to bulk materials“. Chemical Society Reviews 41 (2012), S. 5081. 10.1039/c2cs15351c
  • H. Konietzky, T. Frühwirt und H. Luge: „A New Large Dynamic Rockmechanical Direct Shear Box Device“. Rock Mechanics and Rock Engineering 45 (2012), S. 427–432. 10.1007/s00603-011-0214-x
  • K. Keller, T. Schlothauer, M. Schwarz, G. Heide und E. Kroke: „Shock wave synthesis of aluminium nitride with rocksalt structure“. High Pressure Research 32 (2012), S. 23–29. 10.1080/08957959.2011.642990
  • C. Schimpf, M. Schwarz, E. Kroke, C. Lathe und D. Rafaja: „Significance of microstructure defects for the high pressure/high temperature phase transitions in BN“. HASYLAB Annual Report (2012), S. 3240-3246. Schimpf et al.
  • M. Herrmann, B. Matthey, S. Höhn, I. Kinski, D. Rafaja und A. Michaelis: „Diamond-ceramics composites—New materials for a wide range of challenging applications“. Journal of the European Ceramic Society 32 (2012). Engineering Ceramics 2011 - from Materials to Components, S. 1915–1923. 10.1016/j.jeurceramsoc.2011.11.005
  • M. Dopita, A. Salomon, D. Chmelik, B. Reichelt und D. Rafaja: „Field Assisted Sintering Technique Compaction of Ultrafine-Grained Binderless WC Hard Metals“. Acta Physica Polonica A 122 (2012), S. 639–642. 10.12693/APhysPolA.122.639

2011

  • M. Dopita, D. Rafaja, D. Chmelik, A. Salomon, D. Janisch und W. Lengauer: „Microstructural investigation of hard metals by combination of electron backscatter diffraction and X-ray diffraction“. Materials Structure 18 (2011), S. 169. Dopita et al.

2010

  • A. Wagner, M. Hütter und D. Stoyan: „More on the microstructural characterization of dense particle gels“. Journal of the European Ceramic Society 30 (2010), S. 1237–1243. 10.1016/j.jeurceramsoc.2009.10.004
  • M. R. Schwarz: „Multianvil calibration and education: A four probe method to measure the entire force-versus-pressure curve in a single run – performed as an interdisciplinary lab-course for students“. Journal of Physics: Conference Series 215 (2010), S. 012193. 10.1088/1742-6596/215/1/012193
  • K. Niemietz, A. Wagner, B. Gründig-Wendrock, D. Stoyan und J. R. Niklas: „Variogram analysis of charge-carrier effective lifetime topograms in mc-Si materials“. Solar Energy Materials and Solar Cells 94 (2010), S. 164–170. 10.1016/j.solmat.2009.08.016
  • R. Kužel, M. Janecek, Z. Matej, J. Cıžek, M. Dopita und O. Srba: „Microstructure of equal-channel angular pressed Cu and Cu-Zr samples studied by different methods“. Metallurgical and materials transactions A 41 (2010), S. 1174–1190. 10.1007/S11661-009-9895-0
  • U. Kirsten und M. Reich: „Bohrtechnik/Spezialtiefbau Spanende Gesteinszerstörung mit definierten Schneiden“. BBR Fachmagazine fur Brunnen und Leitungsbau 61 (2010), S. 34.

2009

  • A. Prescimone, C. J. Milios, J. Sanchez-Benitez, K. V. Kamenev, C. Loose, J. Kortus, S. Moggach, M. Murrie, J. E. Warren, A. R. Lennie u. a.: „High pressure induced spin changes and magneto-structural correlations in hexametallic SMMs“. Dalton Transactions (2009), S. 4858–4867. 10.1039/B902485A
  • K. Máthis, T. Krajnák, M. Janecek, M. Dopita und H. S. Kim: „Microstructural evolution of equal-channel angular pressed interstitial-free steel“. International Journal of Materials Research 100 (2009), S. 834–837. 10.3139/146.110100
  • C. Schimpf, T. Barsukova, M. Schwarz, D. Simek, C. Lathe, D. Rafaja und E. Kroke: „In-situ synchrotron radiation study of bulk BN nanocomposites during HP/HT conversion at MAX200x using improved pressure cell design“. HASYLAB Annual Report, (2009).
  • Z. Matej, R. Kužel, M. Dopita, M. Janecek, J. Cížek und T. Brunátová: „XRD profile analysis of ECAP Cu and Cu + Zr samples“. International Journal of Materials Research 100 (2009), S. 880–883. 10.3139/146.110112
  • A. Elsner, A. Wagner, T. Aste, H. Hermann und D. Stoyan: „Specific Surface Area and Volume Fraction of the Cherry-Pit Model with Packed Pits“. J. Phys. Chem. B 113 (2009), S. 7780–7784. 10.1021/jp806767m
  • M. Dopita, M. Janecek, D. Rafaja, J. Uhlír, Z. Matej und R. Kužel: „EBSD investigation of the grain boundary distributions in ultrafine-grained Cu and Cu–Zr polycrystals prepared by equal-channel angular pressing“. International Journal of Materials Research 100 (2009), S. 785–789. 10.3139/146.110111

2008

  • D. Rafaja, M. Dopita, M. Masimov, V. Klemm, N. Wendt und W. Lengauer: „Analysis of local composition gradients in the hard-phase grains of cermets using a combination of X-ray diffraction and electron microscopy“. International Journal of Refractory Metals and Hard Materials 26 (2008), S. 263–275. 10.1016/j.ijrmhm.2007.03.004
  • D. Rafaja, V. Klemm, M. Motylenko, M. Schwarz, T. Barsukova, E. Kroke, D. Frost, L. Dubrovinsky und N. Dubrovinskaia: „Synthesis, microstructure and hardness of bulk ultrahard BN nanocomposites“. Journal of Materials Research 23 (2008), S. 981–993. 10.1557/jmr.2008.0117
  • M. Motylenko, V. Klemm, G. Schreiber, D. Rafaja, M. Schwarz, T. Barsukova und E. Kroke: „Microstructure study on BN nanocomposites using XRD and HRTEM“. Z. Kristallogr. Suppl. 27 (2008), S. 45–52. 10.1524/zksu.2008.0007
  • M. Dopita, D. Rafaja, C. Wüstefeld, M. Ružicka, V. Klemm, D. Heger, G. Schreiber und M. Šíma: „Interplay of microstructural features in Cr1xAlxN and Cr1xyAlxSiyN nanocomposite coatings deposited by cathodic arc evaporation“. Surface and Coatings Technology 202 (2008), S. 3199–3207. 10.1016/j.surfcoat.2007.11.027
  • D. Rafaja, V. Klemm, C. Wüstefeld, M. Motylenko und M. Dopita: „Microstructure analysis of nanocrystalline materials and nanocomposites using the combination of X-ray diffraction and transmission electron microscopy“. Materials Structure 14 (2007), S. 67–73. Rafaja et al.
  • M. Schwarz, T. Barsukova, D. Simek, M. Dopita, C. Lathe, D. Rafaja und E. Kroke: „In-situ study of HP/HT synthesis of Ti-(Al,Si)-N bulk nanocomposites", HASYLAB Annual Report, (2007), S. 647-648. Schwarz et al.

vor 2000

  • O. Kuskov, O. Fabrichnaya und L. Truskinovsky: „Constitution of the mantle. 2. Petrological models of transition zone based on FMS phase diagram“. Physics of the Earth and Planetary Interiors 69 (1991), S. 72–84. 10.1016/0031-9201(91)90154-A
  • O. Fabrichnaya und O. Kushov: „Constitution of the mantle. I. Phase relations in the FeO-MgO-SiO2 system at 10–30 GPa“. Physics of the Earth and Planetary Interiors 69 (1991), S. 56–71. 10.1016/0031-9201(91)90153-9
  • O. L. Kuskov und O. B. Fabrichnaya: „The SiO2 polymorphs: The equations of state and thermodynamic properties of phase transformations". Physics and Chemistry of Minerals 14 (1987), S. 58-66. 10.1007/BF00311149