Publikationen
Fachzeitschriften
- Abendroth, M., Malik, A., Kiefer, B.: A modified Ehlers model for inelastic behavior of foam structures, International Journal of Mechanical Sciences, Volume 270, 15 May 2024, 109094, DOI: 10.1016/j.ijmecsci.2024.109094
- Malik, A., Hütter, G., Abendroth, M., Kiefer, B.: Micromorphic FE2 Simulation of Plastic Deformations of Foam Structures, International Journal of Mechanical Sciences 282 (2024), 109551, DOI: 10.1016/j.ijmecsci.2024.109551, Preprint
- Lange, N., Hütter, G., Kiefer, B.: Monolithic Hyper ROM FE² Method with Clustered Training at Finite Deformations, Computer Methods in Applied Mechanics and Engineering 418 (2024), 116522, DOI: 10.1016/j.cma.2023.116522, Preprint
Tagungsbeiträge
- Varfolomeev, I., Sguaizer, Y., El Khatib, O., Hütter, G., Kiefer, B., Gumbsch, P., Amann, C.: Constraint Effect in Component Design, FVV proceedings R608 (2024), 555-574
- Varfolomeev, I., Sguaizer, Y., El Khatib, O., Hütter, G., Kiefer, B., Amann, C.: Consideration of the Crack Tip Constraint in the Failure Assessment of Ductile Materials, DVM-Bericht 256 (2024), 195-210, DOI: 10.48447/BR-2024-371
Fachzeitschriften
- Schirmer, R.W., Selent, M., Abendroth, M., Kiefer, B.: Identification of creep parameters from multi-step relaxation tests on miniaturised specimen, PAMM- Proceedings in Applied Mathematics and Mechanics, Volume 23, No. 4, DOI: 10.1002/pamm.202300195
- Kirchhof, S., Ams, A., Hütter, G.: On the Question of the Sign of Size Effects in the Elastic Behavior of Foams. Journal of Elasticity,
DOI: 10.1007/s10659-023-10037-6 - Diddige, V., Seupel, A., Roth, S., Kiefer, B.: A phase-field model for hydrogen-promoted fracture based on a mixed rate-type variational setting, PAMM - Proceedings in Applied Mathematics and Mechanics, Volume 24, No. 1, DOI: 10.1002/pamm.202300237
- Dai, Y., Hubálková, J., Voigt, C., Abendroth, M., Liang, X., Yan, W., Li, Y., Aneziris, C.G.: Tensile strength and damage of open-cell ceramic foams under cylindrical splitting test, Journal of Advanced Ceramics, 12 (11), pp. 2003 - 2016, DOI: 10.26599/JAC.2023.9220803
- El Khatib, O., vOertzen, V., Patil, S.A., Kiefer, B.: Phase-field modeling of stress- and temperature-induced hysteresis behavior of shape memory alloys incorporating rate-independent dissipation, PAMM- Proceedings in Applied Mathematics and Mechanics, Volume 23, No. 4, DOI: 10.1002/pamm.202300274
- El Khatib, O., Pham, R.D., Hütter, G., Seupel, A., Kiefer, B.: On the predictive capabilities of non-local models for ductile crack propagation under different levels of stress triaxiality, PAMM- Proceedings in Applied Mathematics and Mechanics, 2023, Vol. 23, No. 4, e202300274, DOI: 10.1002/pamm.202300274
- vOertzen, V., Kiefer, B.: The concept of unequally and nonlinear weighted averaging operators as a fundamental homogenization framework in phase-field modeling, PAMM- Proceedings in Applied Mathematics and Mechanics, Volume 22, No. 1, DOI: 10.1002/pamm.202200243
- Ganesh, R., Dude, D.P., Kuna, M., Kiefer, B.: ProCrackPlast: a finite element tool to simulate 3D fatigue crack growth under large plastic deformations, International Journal of Fracture, Volume 243, pp 65–90, DOI: 10.1007/s10704-023-00732-9
- El Khatib, O., Hütter, G., Pham, R.D., Seupel, A., Kuna, M., Kiefer, B.: A non-iterative parameter identification procedure for the non-local Gurson-Tvergaard-Needleman model based on standardized experiments, International Journal of Fracture, Volume 241, pp 73–94, (2023), DOI: 10.1007/s10704-023-00689-9
- Kiefer, B., Prüger, S., Rheinbach, O., Röver, F.: Monolithic parallel overlapping Schwarz methods in fully-coupled nonlinear chemo-mechanics problems, Computational Mechanics, Volume 71, pp 765–788, DOI: 10.1007/s00466-022-02254-y
- Gesell, S., Ganesh, R., Kuna, M., Fedelich, B., Kiefer, B.: Numerical calculation of ΔCTOD to simulate fatigue crack growth under large scale viscoplastic deformations, Engineering Fracture Mechanics, Volume 281, 28 March 2023, 109064, DOI: 10.1016/j.engfracmech.2023.109064
- G. Hütter: Interpretation of micromorphic constitutive relations for porous materials at the microscale via harmonic decomposition, Journal of the Mechanics and Physics of Solids, 171, 105135, DOI: 10.1016/j.jmps.2022.105135
Tagungsbeiträge
- Schirmer, R.W., Selent, M., Abendroth, M., Kiefer, B.: On multi-step relaxation tests using miniaturized specimens and the determination of creep parameters, SSTT 2023: Determination of mechanical properties of materials by small punch and other miniature testing techniques, SSTT,
- Heinlein, A., Kiefer, B., Prüger, S., Rheinbach, O., Rover, F.: A Comparison Of Direct Solvers In FROSch Applied To Chemo-Mechanics, COUPLED PROBLEMS 2023, International Conference on Computational Methods for Coupled Problems in Science and Engineering, DOI: 10.23967/c.coupled.2023.008
- Abendroth, M., Schirmer, R.W., Kiefer, B.: Recent Developments and Applications of the Small Punch Test Method, GAMM FA Experimentelle Mechanik, Chemnitz
- Abendroth, M., Malik, A., Lange, N., Hütter, G., Kiefer, B.: Comparison of different homogenization approaches for the inelastic behavior of porous structures, GAMM 2023, Dresden,
- vOertzen, V., Kiefer, B.: Spatial and Temporal Homogenization of Phase-Field Equations with an Application to Iron-Based Shape Memory Alloy Modeling, Proceedings of the ASME 2023 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, SMASIS 2023, 11.-13.09.2023, Austin, Texas, DOI: 10.1115/SMASIS2023-111143
- Pham, R.D., Hütter, G., Henkel, S., Seupel, A., Biermann, H., Kiefer, B.: Experimentelle und numerische Untersuchungen des Einflusses der Mehrachsigkeit auf das Risswiderstandsverhalten von duktilem Gusseisen, DVM Bericht 255: Bruchmechanische Werkstoff- und Bauteilbewertung (2023), 54. Tagung des Arbeitskreises Bruchmechanik und Bauteilsicherheit, DOI: 10.48447/BR-2023-014
- Seupel, A., Roth, S, Kiefer, B.: Phase-field modeling of chemically reactive multi-component/multi-phase systems, Proceedings in Applied Mathematics & Mechanics 22 (2023) 1 pp. e202200154, DOI: 10.1002/pamm.202200154
- Schirmer, R.W., Selent, M., Abendroth, M., Kiefer, B.: Bestimmung von viskoplastischen Parametern aus miniaturisierten Relaxationsversuchen, DVM-Bericht 255 (2023) pp. 91-100, 55. Tagung des DVM-Arbeitskreises Bruchmechanik und Bauteilsicherheit, 14.-15.02.2023, Darmstadt, DOI: 10.48447/Br-2023-BB
Fachzeitschriften
- vOertzen, V., Kiefer,B.: Unequally and Non-linearly Weighted Averaging Operators as a General Homogenization Approach for Phase Field Modeling of Phase Transforming Materials
Shape Memory and Superelasticity 8 (2022), pp. 425-437, DOI: 10.1007/s40830-022-00392-z - Kozinov, S., Kuna, M.: Configurational forces in ferroelectric structures analyzed by a macromechanical switching model, Acta Mechanica, Published online July 2022,
DOI: 10.1007/s00707-022-03265-9 - Wallburg, F., Kuna, M., Budnitzki, M., Schoenfelder, S.: A material removal coefficient for diamond wire sawing of silicon, Wear 504-505, 204400 (2022)
DOI: 10.1016/j.wear.2022.204400 - Roth, S., Kiefer, B.: Employing Phase-Field Descriptions of Cohesive Zone Placements in Cohesive Fracture Simulations, International Journal for Numerocal Methods in Engineering 123 (2022) pp. 1191-1227, DOI: 10.1002/nme.6864
- Seupel, A., Kuna, M.: Phenomenological modeling of thermomechanical coupling effects of highly alloyed TRIP-steels at different stress states, Procedia Structural Integrity 30 (2022) pp. 10-17, DOI: 10.1016/j.prostr.2021.12.042
- Takht, F. S., Abendroth, M., Fischer, U., Aneziris, C. G., Kiefer, B.: Utilization of a Miniaturized Brazilian Dic Test for Strength Measurements of C-Boned Alumina Filtr Materials, Advanced Enigneering Materials 24 (2022) pp. 1-10, DOI: 10.1002/adem.202101081
Tagungsbeiträge
- Fehling, E., Middendorf, B., Thiemcke, J., Vollmer, M., Bauer, A., Niendorf, T., von Oertzen, V., Kiefer, B.: Functional Elements Exploiting Superelasticity and the Shape Memory Effect of Fe–Mn–Al–Ni–X Shape-Memory-Alloys in Structural Engineering, Proceedings of the 8th International Conference on Structural Engineering, Mechanics and Computation (SEMC) 2022, in: Zingoni, A. (Ed.), Current Perspectives and New Directions in Mechanics, Modelling and Design of Structural Systems, CRC Press
- Takht, F. S., Abendroth, M., Kiefer, B.: Application of Miniaturized Brazilian Disc Tests for the Determination of High-Temperature Strength of Ceramic Filter Materials, Procedia Structural Integrity, Volume 42, Pages 1069-1073, 23 European Conference on Fracture - ECF23, DOI: 10.1016/j.prostr.2022.12.135
- Ganesh, R., Gesell, Kuna, M., Fedelich, B., Kiefer, B.: Procrackplast: Eine Software zur Simulation des 3D-Risswachstums unter grossen plastischen Deformationen, Procrackplast: A Software for Simulating 3D Crack Growth under large plastic deformation, 54. Tagung des DVM Arbeitskreises Bruchmechanik und Bauteilsicherheit, 22.-23.02.2022, Berlin, DVM-Bericht 254 (2022) pp. 205-214, DOI: 10.48447/Br-2022-021
- Pham, D. R., El Khatib, O., Seupel, A., Hütter, G., Kiefer, B.: Iterationslose Bestimmung der Parameter des Gurson-Modells aus zwei genormten Versuchen, Non-iterative determination of the parameters for the Gurson model from two standard tests, 54. Tagung des DVM Arbeitskreises Bruchmechanik und Bauteilsicherheit, 22.-23.02.2022, Berlin, DVM-Bericht 254 (2022) pp. 43-52, DOI: 10.48447/Br-2022-005
- Schirmer, R. W., Seupel, A., Selent, M., Abendroth, M., Kiefer, B.: Anwendung eines gradientenerweiterten Kriechschädigungsmodells zur Beschreibung des Versagensverhaltens von P91 im Small Punch Test, Application of a gradient-enhanced creep damage model to describe the failure behaviour of P91 during the small punch test, 54. Tagung des DVM Arbeitskreises Bruchmechanik und Bauteilsicherheit, 22.-23.02.2022, Berlin, DVM-Bericht 254 (2022) pp. 73-82, DOI: 10.48447/Br-2022-BB
Fachzeitschriften
- Bartel, T., Kiefer, B., Menzel, A.: An energy-relaxation-based framework for the modeling of magnetic shape memory alloys—Simulation of three-dimensional effects under homogeneous loading conditions, International Journal of Solids and Structures 208–209 (2021) pp. 221–234, DOI: 10.1016/j.ijsolstr.2020.10.024
- El Khatib, O., Kuna, M., Kozinov, S.: Transient thermal fracture analysis of ferroelectric ceramics under electromechanical loading, Smart Materials and Structures 30 (2021) 085033 (13pp), DOI: 10.1088/1361-665X/ac0f90
- Lange, N., Hütter, G., Abendroth, M., Kiefer, B.: Efficient monolithic solution of FE² problems, Proceedings in Applied Mathematics & Mechanics (2021) 2 pp,
DOI: 10.1002/pamm.202100208 - Lange, N., Abendroth, M., Werzner, E., Hütter, G., Kiefer, B.: Influence of the Foam Morphology on the Mechanical Behavior of Flow-Through Foam Filters During Filtration Processes, Advanced Engineering Materials (2021) 16 pp., DOI: 10.1002/adem.202100784
- Lange, N., Hütter, G., Kiefer, B.: An efficient monolithic solution scheme for FE² problems, Computer Methods in Applied Mechanics and Engineering 382 (2021) preprint,
DOI: 10.1016/j.cma.2021.113886 - Lehmann, H., Werzner, E., Malik, A., Abendroth, M., Ray, S., Jung, B.: Computer-Aided Design of Metal Melt Filters: Geometric Modifications of Open-Cell Foams, Effective Hydraulic Properties and Filtration Performance, Advanced Engineering Materials (2021) 11 pp., DOI: 10.1002/adem.202100878
- Lukhi, M., Kuna, M., Hütter, G.: Micromechanical simulation of fatigue in nodular cast iron under stress-controlled loading, Materials Design and Processing Communications (2021)
Special Issue Article e214., DOI: 10.1002/mdp2.214 - Malik, A., Abendroth, M., Hütter, G., Kiefer, B.: A Hybrid Approach Employing Neural Networks to Simulate the Elasto-Plastic Deformation Behavior of 3D-Foam Structures, Advanced Engineering Materials (2021), DOI: 10.1002/adem.202100641
- Pham, R. D., Hütter, G.: Influence of topology and porosity on size effects in stripes of cellular material with honeycomb structure under shear, tension and bending, Mechanic of Material 154 (2021) 103727, DOI: 10.1016/j.mechmat.2020.103727
- Rizzi, G., Hütter, G., Madeo, A., Neff, P.: Analytical solutions of the cylindrical bending problem for the relaxed micromorphic continuum and other generalized continua, Continuum Mechanics and Thermodynamics 33 (2021) pp. 1505-1539, preprint, DOI: 10.1007/s00161-021-00984-7
- Schirmer, R. W., Abendroth, M., Roth, S., Kühnel, L. , Zeidler, H., Kiefer, B.: Simulation-supported characterization of 3D-printed biodegradable structures, GAMM-Mitteilungen (2021) e202100018, DOI: 10.1002/gamm.202100018
- Wetzig, T., Neumann, M. , Schwarz, M., Schöttler, L., Abendroth, M., Aneziris, C. G.: Rapid Prototyping of Carbon-Bonded Alumina Filters with Flame-Sprayed Alumina Coating for Bottom-Teeming Steel Ingot Casting, Advanced Engineering Materials (2021) 2100777, DOI: 10.1002/adem.202100777
- Yu, H., Kuna, M.: Interaction integral method for computation of crack parameters K–T – A review, Engineering Fracture Mechanics 249 (2021) 107722
DOI: 10.1016/j.engfracmech.2021.107722
Tagungsbeiträge
- Prüger, S., Kiefer, B.: Modeling of austenitic TRIP-steels at small scales - a mean-field homogenization approach, XVI International Conference on Computational Plasticity, Fundamentals and Applications (COMPLAS 2021), DOI: 10.23967/complas.2021.046
- Dude, P., Schurig, M., von Ende, S., Roth, S., Kiefer, B., Kuna, M.: Evaluation von PROCRACK im Vergleich zu Franc3D für die Vorhersage von Risswachstum in industrieller Anwendungsumgebung, DVM-Bericht 253, 53. Tagung des Arbeitskreises Bruchmechanik und Bauteilsicherheit (2021), DOI: 10.48447/Br-2021-027
- Ganesh, R., Gesell, S., Kuna, M., Fedelich, B., Kiefer, B.: Numerische Berechnung von ΔCTOD bei thermomechanischer Ermüdungsrissausbreitung, DVM-Bericht 253, 53. Tagung des Arbeitskreises Bruchmechanik und Bauteilsicherheit (2021), DOI: 10.48447/Br-2021-014
- Gesell, S., Fedelich, B., Skrotzki, B., Ganesh, R., Abraham, J., Kuna, M., Kiefer, B.: Numerical simulation and evaluation of crack propagation in time and space of exhaust turbocharger hot parts under thermomechanical fatigue loading with finite element programs, Proceedings FVV, No 1351, Autumn Conference 8 – 9 November (2021), Dorint Am Nürburgring, Hocheifel
- Kiefer, B., Prüger, S., Rheinbach, O., Röver, F., Roth, S.: Variational Settings and Domain Decomposition Based Solution Schemes for a Coupled Deformation-Diffusion Problem, Proceedings in Applied Mathematics and Mechanics 2021(1), accepted, DOI: 10.1002/pamm.202100163
- Lange, N., Hütter, G., Abendroth, M., Kiefer, B.: Efficient monolithic solution of FE2 problems, Proceedings in Applied Mathematics and Mechanics 2021(1) 2 pp.,
DOI: 10.1002/pamm.202100208 - Seupel, A., Kuna, M.: Anwendung eines gradientenerweiterten Schädigungsmodells für die Simulation des Versagens hochlegierter TRIP-Stähle, DVM-Report 253, 53rd Meeting of the Working Group Fracture Mechanics and Component Safety (2021) pp. 33-42, DOI: 10.48447/Br-2021-004
Bücher / Buchbeiträge
- Wallburg F., Meyer K., Budnitzki M., Kuna, M., Kaule F., Schoenfelder S.: Influence of Microcracks on Strength of Diamond Wire Sawn Silicon Substrates, In: Abdel Wahab M. (eds) Proceedings of the 8th International Conference on Fracture, Fatigue and Wear. FFW 2020, Lecture Notes in Mechanical Engineering (2021), Springer, Singapore,
DOI: 10.1007/978-981-15-9893-7_26, ISBN 978-981-15-9892-0 (Print), ISBN 978-981-15-9893-7 (Online)
Dissertationen / Habilitationen
- Seupel, A.: Thermomechanische und schädigungsmechanische Modellierung von hochlegierten TRIP-Stählen, Dissertation, TU Bergakademie Freiberg, Berichtsband IMFD Heft 39 (2021), ISBN: 978-3-86012-662-2
Fachzeitschriften
- Abendroth, M., Hütter, G., Settgast, Chr., Malik, A., Kiefer, B., Kuna, M.: A Hybrid Approach to Describe the Elastic-Plastic Deformation Behavior of 2D Cellular Solids Including Damage Effects, Technische Mechanik 40-1 (2020) pp. 5–14, DOI: 10.24352/UB.OVGU-2020-008
- Abraham, J., Roth, S., Kuna, M.: A cohesive zone model for thermomechanical fatigue, International Journal of Fatigue 136 (2020) 105572, ISSN 0142-1123
DOI: 10.1016/j.ijfatigue.2020.105572 - Bartel, T., Kiefer, B.; Buckmann, K., Menzel, A.: An Energy-Relaxation-Based Framework for the Modelling of Magnetic Shape Memory Alloys --- Simulation of Key Response Features Under Homogeneous Loading Conditions, International Journal of Solids and Structures 182-183 (2020) pp. 162-178, DOI: 10.1016/j.ijsolstr.2019.07.016
- Burgold, A., Droste, M., Seupel, A., Budnitzki, M., Biermann, H., Kuna, M.: Modeling of the cyclic deformation behavior of austenitic TRIP-steels, International Journal of Plasticity 133 (2020) 102792, DOI: 10.1016/j.ijplas.2020.102792
- El Khatib, O., Kuna, M., Kozinov, S.: Switching induced heating at the crack tip in ferroelectric ceramics, International Journal of Fracture (2020)
DOI: 10.1007/s10704-019-00415-4 - Hütter, G., Sab, K., Forest, S.: Kinematics and constitutive relations in the stress-gradient theory: interpretation by homogenization, International Journal of Solids and Structures 193–194 (2020) pp. 90-97, DOI: 10.1016/j.ijsolstr.2020.02.014
- Hütter, G., Settgast, C., Lange, N., Abendroth, M., Kiefer, B.: A hybrid approach for the multi-scale simulation of irreversible material behavior incorporating neural networks
PAMM - Proceedings in Applied Mathematics, DOI: 10.1002/pamm.202000248 - Kiefer, B., Rheinbach, O., Roth, S., Röver, F.: Variational Methods and Parallel Solvers in Chemo-Mechanics, PAMM - Proceedings in Applied Mathematics
DOI: 10.1002/pamm.202000272 - Ludwig, C., Rabold, F., Kuna, M., Schurig, M., Schlums, H.: Simulation of anisotropic crack growth behavior of nickel base alloys under thermomechanical fatigue, Engineering Fracture Mechanics 224 (2020) 106800, DOI: 10.1016/j.engfracmech.2019.106800
- Neumann, M., Gehre, P., Hubálková, J., Zielke, H., Abendroth, M., Aneziris, C. G.: Statistical Analysis of the Flexural Strength of Free-Standing Flame-Sprayed Alumina Coatings Prior and After Thermal Shock, Journal of Thermal Spray Technology (2020), DOI: 10.1007/s11666-020-01114-6
- Prüger, S., Kiefer, B.: A comparative study of integration algorithms for finite single crystal (visco-)plasticity, International Journal of Mechanical Sciences, online (2020) 105740
DOI: 10.1016/j.ijmecsci.2020.105740 - Qayyum, F., Guk, S., Prüger, S., Schmidtchen, M., Saenko, I., Kiefer, B., Kawalla, R., Prahl, U.: Investigating the Local Deformation and Transformation Behavior of Sintered X3CrMnNi16-7-6 TRIP Steel Using a Tuned Crystal Plasticity-Based Numerical Simulation Model, Zeitschrift für Metallkunde: International Journal of Materials Research 111-5 (2020) pp. 392-404,
DOI: 10.3139/146.111900 - Rajendran, M. K., Kuna, M., Budnitzki, M.: Undercooling versus stress induced martensitic phase transformation: The case of MgO – partially stabilized zirconia, Computational Materials Science 174 (2020) 109460, DOI: 10.1016/j.commatsci.2019.109460
- Settgast, C., Hütter, G., Kuna, M., Abendroth, M.: A hybrid approach to simulate the homogenized irreversible elastic–plastic deformations and damage of foams by neural networks, International Journal of Plasticity (2020) 102624, DOI: 10.1016/j.ijplas.2019.11.003
- Seupel, A., Hütter, G., Kuna, M.: On the identification and uniqueness of constitutive parameters for a non-local GTN-model, Engineering Fracture Mechanics 229 (2020) 106817
DOI: 10.1016/j.engfracmech.2019.106817 - Wallburg, F., Kuna, M., Budnitzki. M, Schoenfelder, S.: Experimental and numerical analysis of scratching induced damage during diamond wire sawing of silicon, Wear 454–455 (2020) 203328, DOI: 10.1016/j.wear.2020.203328
- Wolf, C. H., Burgold, A., Henkel, S., Kuna, M., Biermann, H.: Crack growth behaviour in biaxial stress fields: Calculation of K- factors for cruciform specimens, Theoretical and Applied Fracture Mechanics 107 (2020) pp. 10252, DOI: 10.1016/j.tafmec.2020.102521
- Zielke, H., Wetzig, T., Himcinschi, C., Abendroth, M., Kuna, M., Aneziris, C.G.: Influence of carbon content and coking temperature on the biaxial flexural strength of carbon-bonded alumina at elevated temperatures, Carbon 159 (2020) pp. 324-332, DOI: 10.1016/j.carbon.2019.12.042
Tagungsbeiträge
- Abraham, J., Roth, S., Kuna, M.: Ein Kohäsivzonenmodell für Thermomechanische Ermüdung, A Cohesive Zone Model for Thermomechanical Fatigue, 52. Tagung des DVM-Arbeitskreises Bruchmechanik und Bauteilsicherheit, 18.-19.02.2020, Hamburg, DVM-Bericht 252 (2020) pp. 147-156, ISSN 2366-4797
- Hütter, G., Settgast, C., Lange, N., Abendroth, M., Kiefer, B.: A hybrid approach for the multi-scale simulation of irreversible material behavior incorporating neural networks, PAMM - Proceedings in Applied Mathematics, DOI: 10.1002/pamm.202000248
- Hütter, G., Seupel, A., Kuna, M., Kiefer, B.: An initiative towards a standardized gradient-enhanced model of ductile damage for engineering applications, ESIS Technical Commitee 8 in Neubiberg, Januar 2020
- Kiefer, B., Rheinbach, O., Roth, S., Röver, F.: Variational Methods and Parallel Solvers in Chemo-Mechanics, PAMM - Proceedings in Applied Mathematics
DOI: 10.1002/pamm.202000272 - Lukhi, M., Hütter, G., Kuna, M.: Numerische Simulation des Ermudungsrisswachstum in duktilem Gusseisen in folge plastische Versagens des Mikroligamente, A Numerical Simulation of Fatigue Crack Growth in Nodular Cast Iron by Plastic Collapse of the Intervoid Ligaments, 52. Tagung des DVM Arbeitskreises Bruchmechanik und Bauteilsicherheit, 18.-19.02.2020, Hamburg, DVM-Bericht 252 (2020) pp. 107-116, ISSN 2366-4797
- Selent, M., Abendroth, M., Kuna, M., Kiefer, B.: Experimentelle und numerische Untersuchungen zum Kriechverhalten des warmfesten Chromstahls X10CrMoVNb9-1 mittels Small Punch Test, Experimental and numerical investigations on the creep behaviour of heat-resisting chromium steel X10CrMoVNb9-1 by means of small punch test, 52. Tagung des DVM Arbeitskreises, Bruchmechanik und Bauteilsicherheit, 18.-19.02.2020, Hamburg, DVM-Bericht 252 (2020) pp. 167-176, ISSN 2366-4797
- Wolf, C. H., Henkel, S., Burgold, A., Qiu, Y., Kuna, M., Biermann, H.: Kreuzproben zur Untersuchung des Risswachstums bei ein- und mehrachsiger Ermüdungsbeanspruchung, Cruciform Specimens for the Investigation of Crack Growth under Uniaxial and Multiaxial Fatigue Loading, 52. Tagung des DVM Arbeitskreises Bruchmechanik und Bauteilsicherheit, 18.-19.02.2020, Hamburg, DVM-Bericht 252 (2020) pp. 41-50, ISSN 2366-4797
Bücher / Buchbeiträge
- Prüger, S., Kiefer, B.: Towards the Crystal Plasticity Based Modeling of TRIP-Steels — From Material Point to Structural Simulation, In: Biermann, H., Aneziris C. G. (Editors) Austenitic TRIP/TWIP Steels and Steel-Zirconia Composites — Design of Tough, Transformation-Strengthened Composites and Structures, Springer Series in Materials Science, vol. 298-24 (2020) pp. 793-823, Springer International Publishing, Cham., DOI: 10.1007/978-3-030-42603-3_24, ISBN 978-3-030-42602-6 (Hardcover), ISBN 978-3-030-42603-3 (eBook)
- Rajendran, M., K., Budnitzki, M., Kuna, M.: Multi-scale Modeling of Partially Stabilized Zirconia with Applications to TRIP-Matrix Composites, In: Biermann, H., Aneziris C. G. (Editors) Austenitic TRIP/TWIP Steels and Steel-Zirconia Composites — Design of Tough, Transformation-Strengthened Composites and Structures, Springer Series in Materials Science, vol. 298-21 (2020) pp. 679-721, Springer International Publishing, Cham., DOI: 10.1007/978-3-030-42603-3_21, ISBN 978-3-030-42602-6 (Hardcover), ISBN 978-3-030-42603-3 (eBook)
- Seupel, A., Burgold, A., Prüger, S., Budnitzki, M., Kuna, M.: Modeling of the Thermomechanical Behavior, Damage, and Fracture of High Alloy TRIP-Steel, In: Biermann, H., Aneziris C. G. (Editors) Austenitic TRIP/TWIP Steels and Steel-Zirconia Composites — Design of Tough, Transformation-Strengthened Composites and Structures, Springer Series in Materials Science, vol. 298-22 (2020) pp. 723-769, Springer International Publishing, Cham., DOI: 10.1007/978-3-030-42603-3_22, ISBN 978-3-030-42602-6 (Hardcover), ISBN 978-3-030-42603-3 (eBook)
Dissertationen / Habilitationen
- El Khatib, O.: Thermal effects on the fracture mechanics of ferroelectric ceramics
Dissertation, TU Bergakademie Freiberg, Berichtsband IMFD Heft 37 (2020), ISBN: 978-3-86012-646-2 - Gloger, D.: Fehlerbetrachtung zur Finite-Elemente-Submodelltechnik für statische und dynamische Rissanalysen
Dissertation,TU Bergakademie Freiberg, Berichtsband IMFD Heft 34 (2020), ISBN: 978-3-86012-629-5 - Lukhi, M.: Micromechanical Simulation of Fatigue in Nodular Cast Iron
Dissertation,TU Bergakademie Freiberg, Berichtsband IMFD Heft 36 (2020), ISBN: 978-3-86012-642-4 - Wallburg, F.: Experimentelle und numerische Untersuchungen zum Schädigungsverhalten von Siliziumsubstraten während des Diamantdrahtsägeprozesses
Dissertation,TU Bergakademie Freiberg, Berichtsband IMFD Heft 38 (2020), ISBN: 978-3-86012-647-9
Fachzeitschriften
- Benaarbia, A., Chatzigeorgiou, G., Kiefer, B., Meraghni, F.: A Fully Coupled Thermo-Viscoelastic-Viscoplastic-Damage Framework to Study the Cyclic Variability of the Taylor-Quinney Coefficient for Semi-Crystalline Polymers, International Journof Mechanical Sciences 163 (2019) 105128, DOI: 10.1016/j.ijmecsci.2019.105128
- Bartel, T., Schulte, R., Menzel, A., Kiefer, B., Svendsen, B.: Investigations on Enhanced Fischer-Burmeister NCP Functions - Application to a Rate-Dependent Model for Ferroelectrics
Archive of Applied Mechanics 89-6 (2019) pp. 995-1010, DOI: 10.1007/s00419-018-1466-7 - Buckmann, K., Kiefer, B., Bartel, T., Menzel, A.: Simulation of magnetised microstructure evolution based on a micromagnetics-inspired FE framework: Application to magnetic shape memory behaviour, Archive of Applied Mechanics 89-6 (2019) pp. 1085-1102, DOI: 10.1007/s00419-018-1482-7
- Budnitzki, M., Kuna, M.: Scratching of silicon surfaces, International Journal of Solids and Structures (2019) pp. 211-216
DOI: 10.1016/j.ijsolstr.2018.11.024 - El Khatib, O., Kozinov, S. , Kuna, M.: A micro–macro scale approach for thermal effects in ferroelectrics, Continuum Mechanics and Thermodynamics 31 (2019) pp. 1439–1452
DOI: 10.1007/s00161-019-00760-8 - Henkel, S., Wolf, C. H., Biermann, H., Burgold, A. Kuna, M.: Cruciform specimens used for determination of the influence of T-stress on fatigue crack growth with overloads on aluminum alloy Al 6061 T651, Frattura ed Integrità Strutturale 13 (2019) pp. 135-143, DOI: 10.3221/IGF-ESIS.48.16
- Herdering, A., Abendroth, M., Gehre, P., Hubálková, J., Aneziris, C.: Additive manufactured polyamide foams with periodic grid as templates for the production of functional coated carbon-bonded alumina foam filters, Ceramics International 45 (2019) pp. 153-159, DOI: 10.1016/j.ceramint.2018.09.146
- Hütter, G.: On the micro-macro relation for the microdeformation in the homogenization towards micromorphic and micropolar continua, Journal of the Mechanics and Physics of Solids 127 (2019) pp. 62–79, DOI: 10.1016/j.jmps.2019.03.005
- Kozinov, S., Kuna, M.: Mechanically induced ferroelectric domain evolution during crack propagation, Smart Materials and Structures 28-2 (2019) 024001 (13pp)
DOI: 10.1088/1361-665X/aaf67d - Kozinov, S., Kuna, M.: Micromechanical simulation of ferroelectric domain processes at crack tips, Archive of Applied Mechanics 89 (2019) pp. 1069–1083
DOI: 10.1007/s00419-018-1419-1 - Luchini, B., Storti, E., Wetzig, T., Settgast, C., Abendroth, M., Hubálková, J., Pandolfellic, V. C., Aneziris, C. G.: Mechanical and physical characterization of Al2O3–C foam filters produced by distinct processing routes: The importance of the ceramic strut morphology, Journal of the European Ceramic Society 39 (2019) pp. 2760–2769,
DOI: 10.1016/j.jeurceramsoc.2019.02.048 - Settgast, C., Abendroth, M., Kuna, M.: Constitutive modeling of plastic deformation behavior of open-cell foam structures using neural networks, Mechanics of Materials 131 (2019) 10pp.
DOI: 10.1016/j.mechmat.2019.01.015 - Settgast, C., Ranglack-Klemm, Y., Hubalkova, J., Abendroth, M., Kuna, M., Biermann, H.: Validation of an experimental-numerical approach for the high temperature behaviour of open-cell ceramic foams, Journal of the European Ceramic Society 39 (219) pp. 610-617, DOI: 10.1016/j.jeurceramsoc.2018.09.022
- Seupel, A., Kuna, M.: A gradient-enhanced damage model motivated by engineering approaches to ductile failure of steels, International Journal of Damage Mechanics (2019)
online (36pp), DOI: 10.1177/1056789518823879 - Storm, J., Abendroth, M., Kuna, M.: Effect of morphology, topology and anisoptropy of open cell foams on their yield surface, Mechanics of Materials 137 (2019) pp. 103145
DOI: 10.1016/j.mechmat.2019.103145 - Wallburg, F., Kuna, M., Schönfelder, S.: Material Removal Simulation in Sawing Processes of Photovoltaic Silicon, Cambridge University Press, MRS Advances 4 (13),(2019) pp. 761-769
DOI: 10.1557/adv.2019.95 - Wolf, C. H., Henkel, S., Burgold, A., Qiu, Y., Kuna, M., Biermann, H.: Investigation of fatigue crack growth under in-phase loading as well as phase-shifted loading using cruciform specimens, International Journal of Fatigue 124 (2019) pp. 595-617, DOI: 10.1016/j.ijfatigue.2019.03.011
- Wolf, C. H., Henkel, S., Burgold, A., Qiu, Y., Kuna, M., Biermann, H.: Fatigue Crack Growth in Austenitic Stainless Steel: Effects of Phase shifted Loading and Crack Paths, Advanced Engineering Materials 21 (2019) pp. 1800861, DOI: 10.1002/adem.201800861
- Yu, H., Kuna, M., Kozinov, S.: Effect of large-scale domain switching on intensity factors for a crack in 3D ferroelectric single crystals using the I-integral method, International Journal of Solids and Structures 161 (2019) pp. 203–218, DOI: 10.1016/j.ijsolstr.2018.11.015
Tagungsbeiträge
- Chemisky, Y., Kiefer, B., Chatzigeorgiou, G., and Meraghni, F.: Modélisation numérique de la thermomécanique des mécanismes dissipatifs simultanés, Proceedings of CSMA 2019, 14ème Colloque National en Calcul des Structures (2019)
- Prüger, S.; Kiefer, B.: On the Robustness of Stress Integration Algorithms for Finite Single Crystal (Visco)-Plasticity, Proceedings in Applied Mathematics and Mechanics 19-1 (2019)
DOI: 10.1002/pamm.201900129 - Roth, St., Kuna, M., Kiefer, B.: Simulation of Fatigue with Cyclic Cohesive Zone Models, Proceedings of the 8th GACM Colloquium on Computational Mechanics for Young Scientists from Academia and Industry August 28–30, 2019 in Kassel, Germany, MS 06: Modeling and simulation of fatigue in brittle and ductile materials
- Roth, S., Kiefer, B.: Simulation von Ermüdungsrissausbreitung mit einem zyklischen Kohäsivzonenmodell unter Nutzung einer Phasenfeldmodellierung, DVM-Bericht, 51. Tagung des DVM-Arbeitskreises Bruchvorgänge (2019)
- Settgast, C.: A Hybrid Approach to Describe the Elastic-Plastic Deformation Behaviour of Porous Media Including Damage Effects, Proceeding of ICMM6, 6th International Conference on Material Modelling, 26.-28.06.2019, Lund, Schweden
- Wolf, C. H.; Burgold, A.; Henkel, S.; Kuna, M. & Biermann, H., Carpinteri, A.; Morel, F. & Palin-Luc, T. (Eds.): Cruciform specimens for the determination of crack growth behaviour in biaxial stress fields: calculation of K-factors, MATEC Web of Conferences, EDP Sciences, 300, 11008 (2019)
Dissertationen / Habilitationen
- Burgold, A.: Modellierung des Bruchverhaltens austenitischer TRIP-Stähle, Dissertation,TU Bergakademie Freiberg, Berichtsband IMFD Heft 32 (2019)
ISBN: 978-3-86012-617-2 - Hütter, G.: A Theory for the Homogenisation Towards Mircomorphic Media and its Application to Size Effects and Damage, Habilitation,TU Bergakademie Freiberg, Berichtsband IMFD Heft 29 (2019), ISBN: 978-3-86012-603-5
- Settgast, C.: Numerische Untersuchungen der Bruchfestigkeit uninelastischen Deformationen von offenzelligen keramischen Schaumstrukturen, Dissertation, TU Bergakademie Freiberg,
Berichtsband IMFD Heft 30 (2019), ISBN: 978-3-86012-613-4 - Zielke, H.: Bestimmung der bruch- und schädigungsmechanischen Eigenschaften keramischer Filterwerkstoffe aus Kleinstproben, Dissertation, TU Bergakademie Freiberg, Berichtsband IMFD, Heft 33 (2019), ISBN: 978-3-86012-623-3
Fachzeitschriften
- Burgold, A., Henkel, S., Roth, St., Kuna, M., Biermann, H.: Fracture mechanics testing and crack growth simulation of highly ductile austenitic steel
Materials Testing 60 (2018) pp. 341-348, DOI: 10.3139/120.111156 - Burgold, A., Roth. St., Kuna, M.: Cohesive Zone Modeling of Stable Crack Propagation in Highly Ductile Steel, Key Engineering Materials 774 (2018) pp. 167-172
DOI: 10.4028/www.scientific.net/KEM.774.167 - Giang, N. A., Seupel, A., Kuna, M., Hütter, G.: Dislocation pile-up and cleavage: effects of strain gradient plasticity on micro-crack initiation in ferritic steel, International Journal of Fracture 214-1 (2018) pp. 1-15, DOI: 10.1007/s10704-018-0313-8
- Hartl, D. J., Kiefer, B., Schulte, R., Menzel, A.: Computationally-efficient modeling of inelastic single crystal responses via anisotropic yield surfaces: Applications to shape memory alloys
International Journal of Solids and Structures 136-137 (2018) pp. 38-59, DOI: 10.1016/j.ijsolstr.2017.12.002 - Ingraffea, A., Kuna, M. (Editors): Dr. Paul Croce Paris (August 7, 1930 – January 15, 2017), Engineering Fracture Mechanics 187 (2018) pp. 1-10
DOI: 10.1016/j.engfracmech.2017.10.001, ISSN 0013-7944 - Ingraffea, A., Kuna, M., Feng, X.Q., Zhang, J.: Editorial to the Special Issue 50th Anniversary of EFM, Engineering Fracture Mechanics 187 (2018) pp. 16-21
DOI: 10.1016/j.engfracmech.2018.01.029, ISSN 0013-7944 - Kiefer, B., Waffenschmidt, T., Sprave, l., Menzel, A.: A gradient-enhanced damage model coupled to plasticity—multi-surface formulation and algorithmic concepts, International Journal of Damage Mechanics 27 (2) (2018) pp. 253-295, DOI: 10.1177/1056789516676306
- Kozinov, S., Kuna, M.: Simulation of fatigue damage in ferroelectric polycrystals under mechanical/electrical loading, Journal of the Mechanics and Physics of Solids 116 (2018)
pp. 150-170, DOI: 10.1016/j.jmps.2018.03.013 - Lukhi, M., Kuna, M., Hütter, G.: Numerical investigation of low cycle fatigue mechanism in nodular cast iron International, Journal of Fatigue 113 (2018) pp. 290-298
DOI: 10.1016/j.ijfatigue.2018.04.019 - Seupel, A., Hütter, G., Kuna, M.: An efficient FE-implementation of implicit gradient-enhanced damage models to simulate ductile failure, Engineering Fracture Mechanics 199 (2018)
pp. 41-60, DOI: 10.1016/j.engfracmech.2018.01.022 - Yu, H., Wang, J., Kozinov, S., Kuna, M.: Phase field analysis of crack tip parameters in ferroelectric polycrystals under large-scale switching, Acta Materialia 154 (2018) pp. 334-342
ISSN 1359-6454, DOI: 10.1016/j.actamat.2018.05.042 - Zielke, H., Abendroth, M., Kuna, M., Kiefer, B.: Determining the Fracture Toughness of Ceramic Filter Materials Using the Miniaturized Chevron-Notched Beam Method at High Temperature, Ceramics International 44-12 (2018) pp.13986-13993, DOI: 10.1016/j.ceramint.2018.04.248
Tagungsbeiträge
- Bartel, T., Kiefer, B., Buckmann, K. and Menzel, A.: A Finite-Element Framework for the Modelling and Simulation of Phase Transforming Magnetic Solids Using Energy Relaxation Concepts, Proceedings in Applied Mathematics and Mechanics 18 (1) 2018, DOI: 10.1002/pamm.201800415
- Burgold, A., Henkel, S., Roth, St., Kuna, M., Biermann, H.: Experimentelle und numerische Untersuchung eines hochduktilen austenitischen Gussstahles, In: 50. Tagung Arbeitskreis Bruchvorgänge, DVM-Bericht 250 (2018) pp. 217-226, ISSN 2366-4797
- El-Khatib, O., Kuna, M.: Temperature influence on ferroelectric materials, In: Proceeding of the 3rd Seminar on the Mechanics of Multifunctional Materials (2018) pp. 23-26, Bad Honnef, 11.-15.06.2018, ISBN-10 3-9818074-4-8, ISBN-13 978-3-9818074-4-8
- Giang, N. A., Kuna, M. Hütter, G.: Effect of Gradient Plasticity on Crack Initiation and Propagation in the Ductile-Brittle Transition Region of Ferritic Steel, ECF22 - Loading and Environmental effects on Structural Integrity, In: Procedia Structural Integrity Procedia 13 (2018) pp. 45-50, DOI: 10.1016/j.prostr.2018.12.008
- Henkel, S., Wolf, C. H., Burgold, A., Kuna, M., Biermann, H.: Cruciform specimens as a tool to investigate fatigue crack growth behavior of metals, 6th International Conference on Crack Paths, 19.-21.09.2018
- Kiefer, B., Hein, J., Abendroth, M., Biermann, H., Henkel, S., Niendorf, T., Krooß, P., Chemisky, Y.: On the Potential of Using the Small Punch Test for the Characterization of SMA Behavior Under Multi-Axial Loading Conditions, Proceedings of the ASME 2018 Conference on Smart Materials, Adaptive Structures and Intelligent Systems (SMASIS), paper 7973
- Kozinov, S., Kuna, M.: Investigation of mechanically induced crack tip fields in ferroelectric materials, In: Proceeding of the 3rd Seminar on the Mechanics of Multifunctional Materials (2018) pp. 63-66, Bad Honnef, 11.-15.06.2018, ISBN-10 3-9818074-4-8, ISBN-13 978-3-9818074-4-8
- Lukhi, M., Hütter, G., Kuna. M.: A Novel Micromechanics Approach for Understanding of Fatigue in Nodular Cast Iron, ECF22 - Loading and Environmental effects on Structural Integrity, In: Procedia Structural Integrity Procedia 13 (2018) pp. 607–612, DOI: 10.1016/j.prostr.2018.12.100
- Schulte, R., Bartel, T., Menzel, A., Kiefer, B. and Svendsen, B.: Investigations on Different Fischer-Burmeister Functions Applied to the Modelling of Ferroelectrics, Proceedings in Applied Mathematics and Mechanics 18 (1) 2018, DOI: 10.1002/pamm.201800331
- Selent, M., Abendroth, M., Kuna, M., Kiefer, B.: Experimental investigations on the failure of a coating-substrate compound by means of the C-specimen concept and the small punch test,
5th International Conference SSTT (Small Sample Test Techniques), 10.-12.07.2018, Swansea, Wales, Conference Proceedings (2018) pp. 312-320 - Wallburg, F., Kuna, M., Schönfelder, S.: A Numerical Model for the Simulation of Subsurface Damage During Wire Sawing of Silicon, 36. CADFEM ANSYS Simulation Conference Leipzig, October 10-12, (2018)
- Wolf, C. H., Henkel, S., Qiu, Y., Ackermann, S., Burgold, A., Kuna, M., Biermann, H.: Fatigue crack growth under in-phase loading as well as 180° phase- shifted loading of austenitic stainless steel, 6th International Conference on Crack Paths, 19.-21.09.2018
Dissertationen / Habilitationen
- Soltysiak, St.: Untersuchung des Deformations- und Versagensverhaltens kohlenstoffgebundener keramischer Werkstoffe mittels miniaturisierter Prüfverfahren, Dissertation,TU Bergakademie Freiberg, Berichtsband IMFD Heft 28 (2018), ISBN: 978-3-86012-591-5
Bücher / Buchbeiträge
- Yu, H., Kuna, M.: A J-Interaction Integral to Compute Force Stress and Couple Stress Intensity Factors for Cracks in Functionally Graded Micropolar Materials, In: Advanced Structured Materials 80 (2018) pp. 419-448, Advanced in Mechanics of Materials and Structural Analysis - In Honor of Reinhold Kienzler, DOI: 10.1007/978-3-319-70563-7_19
Fachzeitschriften
- Abendroth, M.: FEM Analysis of Small Punch Test, Key Engineering Materials 734 (2017) pp. 23-36
DOI: 10.4028/www.scientific.net/KEM.734.23 - Abendroth, M., Werzner, E., Settgast, C., Ray, S.: An Approach Toward Numerical Investigation of the Mechanical Behavior of Ceramic Foams during Metal Melt Filtration Processes
Advanced Engineering Materials 19-9 (2017) 1-10, DOI: 10.1002/adem.201700080 - Budnitzki, M., Kuna, M.: Experimental and numerical investigations on stress induced phase transitions in silicon, International Journal of Solids and Structures 106–107 (2017)
pp. 294–304, DOI: 10.1016/j.ijsolstr.2016.09.006 - Ehlers, W., Govindjee, S., Keip, M.-A., Kiefer, B., Linder, C., Schröder, J.: In Memorian of Christian Miehe, Mechanics Research Communications 80 (2017) p. 3
DOI: 10.1016/j.mechrescom.2017.02.001 - Giang, N. A., Kuna, M., Hütter, G.: Influence of carbide particles on crack initiation and propagation with competing ductile-brittle transition in ferritic steel, Theoretical and Applied Fracture Mechanics 92 (2017) pp. 89-98, DOI: 10.1016/j.tafmec.2017.05.015 , PDF
- Gladkyy, A., Kuna, M.: DEM simulation of polyhedral particle cracking using a combined Mohr–Coulomb–Weibull failure criterion, Granular Matter (2017) 19 (3), art. no. 41
DOI 10.1007/s10035-017-0731-8 - Hein, J., Kuna, M.: A generalized J-integral for thermal shock analyses of 3D surface cracks in spatially and temperature dependent materials, Theoretical and Applied Fracture Mechanics 92 (2017) pp. 318-330, DOI: 10.1016/j.tafmec.2017.04.013
- Hütter, G.: A micromechanical gradient extension of Gurson’s model of ductile damage within the theory of microdilatational media, International Journal of Solids and Structures 110-111 (2017) pp. 15-23, DOI: 10.1016/j.ijsolstr.2017.02.007
- Hütter, G.: Homogenization of a Cauchy continuum towards a micromorphic continuum, Journal of the Mechanics and Physics of Solids 99 (2017) pp. 394-408
DOI: 10.1016/j.jmps.2016.09.010 - Kiefer, B., Furlan, T., Mosler, J.: A numerical convergence study regarding homogenization assumptions in phase field modeling, International Journal for Numerical Methods in Engineering 112 (2017) pp. 1097-1128, DOI: 10.1002/nme.5547
- Kiefer, B., Marschner, U., Mahmoodi, N.: Special Issue: ASME 2015 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, Symposium on Modeling, Simulation and Control, Journal of Intelligent Material Systems and Structures (2107) 28 (16) pp. 2206–2207, DOI: 10.1177/1045389X17730237
- Roth, S., Kuna, M.: Prediction of size-dependent fatigue failure modes by means of a cyclic cohesive zone model, International Journal of Fatigue 100 (2017) pp. 58–67,
DOI: 10.1016/j.ijfatigue.2017.01.044 - Settgast, C.,Solarek, J., Klemm, Y., Abendroth, S., Kuna, M., Biermann, H.: Prediction of High Temperature Behavior of Open-Cell Ceramic Foams Using an Experimental-Numerical Approach, Advanced Engineering Materials (2017) pp. 1-9, online, DOI: 10.1002/adem.201700082
- Werzner, E., Abendroth, M., Demuth, C., Settgast, C., Trimis, D., Krause, H., Ray, S.: Influence of Foam Morphology on Effective Properties Related to Metal Melt Filtration
Advanced Engineering Materials (2017) pp. 1-10, DOI: 10.1002/adem.201700240 - Zielke, H., Abendroth, M., Kuna, M.: Fracture Toughness Characterization of Carbon Bonded Alumina Using Chevron Notched Specimens, Key Engineering Materials 754 (2017)
pp. 71-74, DOI: 10.4028/www.scientific.net/KEM.754.71, ISSN: 1662-9795 - Zielke, H., Schmidt, A., Abendroth, M., Kuna, M., Aneziris, C.: Influence of the specimen manufacturing process on the strength of carbon-bonded alumina (Al203-C)
Advanced Engineering Materials (2017), pp.1-7, DOI: 10.1002/adem.201700083
Tagungsbeiträge
- Bartel, T., Kiefer, B., Buckmann, K., Menzel, A.: Towards a micromagnetics-inspired framework for the modelling of variant switching in magnetic shape memory alloys,
PAMM - Proc. Applied Mathematics and Mechanics 17 (2017) pp. 399 – 400, DOI: 10.1002/pamm.201710169 - Hütter, G.: Micromorphic homogenisation and its application to a model of ductile damage, PAMM - Proc. Applied Mathematics and Mechanics 17 (2017) pp. 599 - 600
DOI: 10.1002/pamm.201710269 - Hütter, G., Giang, N. A., Kuna, M.: Mikromechanische Simulation des Einflusses von Einschlüssen auf die Bruchzähigkeit ferritischer Stähle, In: 49. Tagung Arbeitskreis Bruchvorgänge,
DVM-Bericht 249 (2017) pp. 141-148, ISSN 2366-479 - Kiefer, B., Bartel, T.: On Variationally-Consistent Homogenization Approaches in Multi-Phase Magnetic Solids, PAMM - Proc. Applied Mathematics and Mechanics 17 (2017) pp. 517-518
DOI: 10.1002/pamm.201710228 - Kozinov, S., Kuna, M.: Numerical investigation of crack propagation direction in ferroelectric actuators, Proc. SPIE 10165, Behavior and Mechanics of Multifunctional Materials and Composites 2017, 1016507 (April 11, 2017), DOI: 10.1117/12.2258229
- Ludwig, C., Rabold, F., Roth, S., Kuna, M., Schurig, M., Duó, P., Schlums, H.: Simulation von Rissausbreitung in der Nickelbasislegierung ALLVAC® 718Plus, In: 49. Tagung Arbeitskreis Bruchvorgänge, DVM-Bericht 249 (2017) pp. 169-178, ISSN 2366-4797
- Rabold, F., Kuna, M., Fuskova, L., Tönißen, N.: Bruchmechanische Bewertung der Rotornabe einer Windkraftanlage, In: 49. Tagung Arbeitskreis Bruchvorgänge, DVM-Bericht 249 (2017) pp. 287-296, ISSN 2366-4797
- Settgast, C., Abendroth, M., Kuna, M.: Fracture Mechanical Analysis of Open-Cell Ceramic Foams (Poster), CISM-Course "Mechanics of Liquid and Solid Foams", Udine, Italien
- Settgast, C., Abendroth, M., Kuna, M.: Investigation of creep behavior of open cell ceramic Kelvin foam, Proceedings of the International Conference on Creep and Fracture of Engineering Materials and Structures (Creep2017) pp. 167-168, St. Petersburg, Russia SpbPU Publisher, ISBN: 978-5-7422-5799-8
- Seupel, A., Kuna, M.: Phenomenological Modeling of Strain Hardening Phase Transformation and Damage Effects of TRIP-Steels, XIV International Conference on Computational Plasticity.
Fundamentals and Applications, COMPLAS XIV (04.-10.09.2017) 12 pp. (Eds.) E. Onate, D.R.J. Owen, D. Peric & M. Chiumenti
Dissertationen / Habilitationen
- Haase, S.: Beitrag zur numerischen Simulation von Risswachstumsvorgängen in Abgaskomponenten unter thermomechanischer Ermüdungsbeanspruchung, Dissertation, TU Bergakademie Freiberg, Berichtsband IMFD Heft 26 (2017), ISBN: 978-3-86012-554-0
- Hein, J.: Numerische Beanspruchungsanalysen und bruchmechanische Festigkeitskriterien zur Optimierung der Thermoschockbeständigkeit von gradierten und geschichteten Strukturen aus Feuerfestwerkstoffen, Dissertation, TU Bergakademie Freiberg, Berichtsband IMFD Heft 27 (2017), ISBN: 978-3-86012-559-5
Bücher / Buchbeiträge
- Kozinov, S., Kuna, M.: Numerical Analysis of Fracture of Pre-stressed Ferroelectric Actuator Taking into Account Cohesive Zone for Damage Accumulation, Smart Structures and Materials, Selected Papers from the 7th ECCOMAS Thematic Conference on Smart Structures and Materials 2015, Hrsg. A.L. Araujo and C.A. Mota Soares (eds.), Springer International Publishing Switzerland 2017, ISBN 978-3-319-44505-2, Computational Methods in Applied Sciences 43 (2017) pp. 23-39, DOI: 10.1007/978-3-319-44507-6_2
Fachzeitschriften
- Budnitzki, M., Kuna, M.: Stress induced phase transitions in silicon, Journal of the Mechanics and Physics of Solids 95 (2016) pp. 64-91
DOI: 10.1016/j.jmps.2016.03.017 - Giang, N. A., Hütter, G., Kuna, M.: Micromechanical Modeling of Crack Initiation and Propagation in the Ductile-Brittle Transition Region, Key Engineering Materials 713 (2016) pp. 58-61, DOI: 10.4028/www.scientific.net/KEM.713.58
- Hein, J., El Khatib, O., Kuna, M.: Influence of Interfaces on Crack Propagation through a Layered Refractory Loaded by Thermal Shock, Journal of Ceramic Science and Technology 07-02 (2016) pp. 203-208, DOI: 10.4416/JCST2016-00004
- Hütter, G.: An extended Coleman-Noll procedure for generalized continuum theories, Continuum Mechanics and Thermodynamics 28 (2016) pp. 1935-1941
DOI: 10.1007/s00161-016-0506-1, PDF - Hütter, G.: Application of a microstrain continuum to size effects in bending and torsion of foams, International Journal of Engineering Science 101 (2016) pp. 81- 91
DOI: 10.1016/j.ijengsci.2015.12.006, PDF - Hütter, G., Skrypnyk, R.: Micromorphic Homogenisation of a Porous Medium: Application to Size Effects and Quasi-Brittle Damage, Proceedings in Applied Mathematics and Mechanics 16 (2016), pp. 347-348, DOI:10.1002/pamm.201610162
- Keip, M.-K., Kiefer, B., Schröder, J., Linder, C.: Special Issue on Phase Field Approaches to Fracture, In Memory of Professor Christian Miehe (1956–2016), Computer methods in applied mechanics and engineering 312 (2016) pp. 1-2, DOI: 10.1016/j.cma.2016.09.042
- Nassauer, B., Liedke, T., Kuna, M.: Development of a coupled discrete element (DEM) – smoothed particle hydrodynamics (SPH) simulation method for polyhedral particles
Computational Particle Mechanics 3/1 (2016) pp. 95-106, DOI: 10.1007/s40571-015-0097-9 - Selent, M., Abendroth, M., Kuna, M.: Experimental and Numerical Investigations on the Creep Behaviour of Heat-Resisting Chromium Steel X10CrMoVNb9-1 by Means of Small Punch Test
Transactions of the Indian Institute of Metals 69-2 (2016) pp. 629-633, Springer Private Ltd., India, DOI: 10.1007/s12666-015-0797-0 - Settgast, C., Abendroth, M., Kuna, M.: Fracture Mechanical Analysis of Open Cell Ceramic Foams Under Thermal Shock Loading, Journal of Multiscale Modelling 7-4 (2016) 1640006 (6 pages), World Scientific Publishing Europe Ltd., DOI: 10.1142/S1756973716400060
- Settgast, C., Abendroth, M., Kuna, M.: Fracture mechanical analysis of open cell ceramic foams under multi-axial mechanical loading, Archive of Applied Mechanics 86 (2016) pp. 335–349, DOI: 10.1007/s00419-015-1107-3
- Seupel, A. Eckner, R., Burgold, A., Kuna, M., Krüger, L.: Experimental characterization and damage modeling of a particle reinforced TWIP-steel matrix composite
Materials Science and Engineering: A 662-26 (2016) pp. 342–355, DOI: 10.1016/j.msea.2016.03.056 - Storm, J., Abendroth, M., Kuna, M.: Numerical and anlytical solutions for anisotropic yield surfaces of the open-cell Kelvin foam, International Journal of Mechanical Sciences 105 (2016) pp. 70 - 82, DOI: 10.1016/j.ijmecsci.2015.10.014
- Yu, Hj., Wang, J., Shimada, T., Wu, H., Wu, L., Kuna, M., Kitamura, T.: An I-integral method for crack-tip intensity factor variation due to domain switching in ferroelectric single-crystals
Journal of the Mechanics and Physics of Solids 94 (2016) pp. 207–229, DOI: 10.1016/j.jmps.2016.04.031 - Yu, Hj., Sumigaw, T., Kitamura, T., Kuna, M.: Domain-independent I-integrals for force and couple stress intensity factor evaluations of a crack in micropolar thermoelastic medium
International Journal of Solids and Structures 100–101 (2016) pp. 470–484, DOI: 10.1016/j.ijsolstr.2016.09.020 - Zielke, H., Abendroth, M., Kuna, M.: Determining fracture mechanical properties for brittle materials using the ball on three balls test combined with numerical simulations
Theoretical and Applied Fracture Mechanics 86 (2016) pp. 19–24, DOI: 10.1016/j.tafmec.2016.09.001 - Zielke, H., Abendroth, M., Kuna, M.: Determination of fracture mechanical properties of carbon bonded alumina using miniaturized specimens, Key Engineering Materials 713 (2016) pp. 70-73, DOI: 10.4028/www.scientific.net/KEM.713.70
Tagungsbeiträge
- Abendroth, M., Soltysiak, S.: Assessment of Material Properties by Means of the Small Punch Test, Recent Trends in Fracture and Damage Mechanics (eds. Hütter, G., Zybell, L.) pp. 127-157, Springer (2016), DOI: 10.1007/978-3-319-21467-2_6
- Hein, J., Kuna, M.: 3D J-integral for functionally graded and temperature dependent thermoelastic materials, 21st European Conference on Fracture, ECF21, 20-24 June 2016, Catania, Italy Procedia Structural Integrity 2 (2016) pp. 2462–2254, DOI: 10.1016/j.prostr.2016.06.281
- Hütter, G., Zybell, L.: Recent Trends in Fracture and Damage Mechanics, Springer International Publishing Switzerland (2016) pp. 1 - 442, ISBN 978-3-319-214665
DOI: 10.1007/978-3-319-21467-2 - Roth, S., Kuna, M.: Anwendung eines zyklischen Kohäsivzonenmodells: Größeneffekt und zyklische Versagensbewertung, Application of a cyclic cohesive zone model: Size effect and cyclic failure assessment, 48. DVM Arbeitskreis Bruchmechanik und Bauteilsicherheit, 16.-17.02.2016, Freiburg, DVM-Bericht 248 (2016) pp. 11-20, ISSN 2366-4797
- Selent, M., Abendroth, M., Kuna, M.: Experimental and numerical investigations on the creep behaviour of heat-resisting chromium steel X10CrMoVNb9-1 by means of Small Punch Test
Conference proceedings, IGCAR - 7th International Conference on Creep Fatigue and Creep-Fatigue Interaction (2016), 19-22 January 2016, Kalpakkam, India - Selent, M., Kuna, M.: Experimentelle Untersuchungen zum Versagen eines Korrosionsschutzschicht-Substrat-Verbundes mittels C-Proben-Konzept und Small Punch Test, Experimental investigations on the failure of a coating-substrate-compound by means of C-Specimen-Concept and small punch test, 48. DVM Arbeitskreis Bruchmechanik und Bauteilsicherheit, 16.-17.02.2016, Freiburg, DVM-Bericht 248 (2016) pp. 171-180, ISSN 2366-4797
- Settgast, C., Abendroth, M., Kuna, M.: Bruchmechanische Analyse von offenzelligen Keramischen Schäumen, Fracture Mechanical Analysis of open cell Ceramic Foams
48. DVM Arbeitskreis Bruchmechanik und Bauteilsicherheit, 16.-17.02.2016, Freiburg, DVM-Bericht 248 (2016) pp. 51-60, ISSN 2366-4797 - Sprave, L., Kiefer, B., Menzel, A: Computational Aspects of Transient Diffusion-Driven Swelling, Proceedings (extended abstract) of the 29th Nordic Seminar on Computational Mechanics, 1-4 (2016)
- Zielke, H., Abendroth, M., Kuna, M.: Bestimmung der bruch- und schädigungsmechanischen Eigenschaften keramischer Filterwerkstoffe aus Kleinstproben, Determination of fracture and damage mechanical properties of ceramic filter materials using miniaturized specimens, 48. DVM Arbeitskreis Bruchmechanik und Bauteilsicherheit, 16.-17.02.2016, Freiburg
DVM-Bericht 248 (2016) pp. 61-70, ISSN 2366-4797 - Zybell, L., Kuna, M., Henkel, S., Hübner, P.: Vorhersage von Verzögerungseffekten beim Ermüdungsrisswachstum mit einzelnen Überlasten, Prediction of retardation effects during fatigue crack growth with single overloads, 48. DVM Arbeitskreis Bruchmechanik und Bauteilsicherheit, 16.-17.02.2016, Freiburg, DVM-Bericht 248 (2016) pp. 181-190, ISSN 2366-4797
Dissertationen / Habilitationen
- Koch, F.: Untersuchung des Festigkeitsverhaltens beim Schweißen druckbelasteter Gashochdruckleitungen, Dissertation,TU Bergakademie Freiberg, Berichtsband IMFD Heft 22 (2016)
ISBN: 978-3-86012-524-3 - Prüger, St.: Thermomechanische Modellierung der dehnungsinduzierten Phasenumwandlung und der asymetrischen Verfestigung in einem TRIP-Stahlguss, Dissertation,TU Bergakademie Freiberg, Berichtsband IMFD Heft 23 (2016), ISBN: 978-386012-528-1
- Roth, St.: Entwicklung und Implementierung zyklischer Kohäsivzonenmodelle zur Simulation von Werkstoffermüdung, Dissertation,TU Bergakademie Freiberg, Berichtsband IMFD Heft 24 (2016), ISBN: 978-3-86012-536-6
- Storm, J.: Entwicklung und Bewertung von effizienten Berechnungskonzepten für keramische Filter, Dissertation,TU Bergakademie Freiberg, Berichtsband IMFD Heft 25 (2016)
ISBN: 978-3-86012-549-6
Bücher / Buchbeiträge
- Rabold, F., Kuna, M.: Finite-Elemente-Simulation des Ermüdungsrisswachstums, Glanzlichter der Forschung an der TU Bergakademie Freiberg - 250 Jahre nach Ihrer Gründung (2016) pp. 237-246, Hrsg. Prof.-Dr.-Ing. Ulrich Groß, im Auftrag des Rektors der TU Bergakademie Freiberg, Chemnitzer Verlag, ISBN: 978-3-944509-26-6
Fachzeitschriften
- Burgold, A., Kuna, M., Prüger, S.: Crack tip fields in ductile materials with martensitic phase transformation – A numerical 2D study, Engineering Fracture Mechanics 138 (2015) pp. 169–184, DOI: 10.1016/j.engfracmech.2015.03.002
- Henkel, S., Liebelt, E., Biermann, H., Ackermann, S., Zybell, L.: Crack growth behavior of aluminum alloy 6061 T651 under uniaxial and biaxial planar testing condition
Frattura ed Integrità Strutturale, 34, Focussed on Crack Paths (2015) pp. 466-475, DOI: 10.3221/IGF-ESIS.34.52 - Hensl, T., Mühlich, U., Budnitzki, M., Kuna, M.: An eigenstrain approach to predict phase transformation and self-accommodation in partially stabilized zirconia
Acta Materialia 86 (2015) pp. 361–373, DOI: 10.1016/j.actamat.2014.12.032 - Hütter, G., Zybell, L., Kuna, M.: Micromechanical modeling of crack propagation in nodular cast iron with competing ductile and cleavage failure
Engineering Fracture Mechanics 147 (2015) pp. 388-397, DOI: 10.1016/j.engfracmech.2015.06.039, PDF - Hütter, G., Zybell, L., Kuna, M.: Micromechanisms of fracture in nodular cast iron: From experimental findings towards modeling strategies - A Review
Engineering Fracture Mechanics 144 (2015) pp. 118-141, DOI: 10.1016/j.engfracmech.2015.06.042, PDF - Hütter, G., Zybell, L., Kuna, M.: Mikromechanische Simulation der Rissinitiierung und -ausbreitung in duktilem Gusseisen
Giesserei-Praxis 11 (2015) pp. 521-526 - Hütter, G., Mühlich, U. Kuna, M.: Micromorphic homogenization of a porous medium: elastic behavior and quasi-brittle damage, Continuum Mechanics and Thermodynamics 27 (2015) pp. 1059-1072, DOI: 10.1007/s00161-014-0402-5, PDF
- Kozinov, S., Kuna, M.: Simulation of damage in ferroelectric actuators by means of cohesive zone model, Sensors and Actuators A: Physical 233 (2015) pp. 176–183
DOI: 10.1016/j.sna.2015.06.030 - Kulawinski, D., Ackermann, S., Seupel, A., Lippmann, T., Henkel, S., Kuna, M., Weidner, A., Biermann, H.: Deformation and strain hardening behavior of powder metallurgical TRIP steel under quasi-staticbiaxial-planar loading, Materials Science & Engineering A 642 (2015) pp. 317-329, DOI: 10.1016/j.msea.2015.06.083
- Kuna, M.: Anwendung schädigungsmechanischer Materialmodelle, ACAMONTA. Zeitschrift für Freunde und Förderer der TU Bergakademie Freiberg 22. Jahrgang
(2015) pp. 35-39 - Kuna, M., Burgold, A., Prüger, S.: Stress analysis and configurational forces for cracks in TRIP-steels, International Journal of Fracture 193 No. 2 (2015) pp. 171-187
DOI: 10.1007/s10704-015-0027-0 - Kuna, M., Roth,S.: General remarks on cyclic cohesive zone models, International Journal of Fracture - Special Invited Article Celebrating IJF at 50 - 196 (2015) pp. 147-167
DOI: 10.1007/s10704-015-0053-y - Mikulich, V., Nassauer, B., Kuna, M., Brücker, C.: Experimental and numerical study of interaction between particle loaded fluid and arough wall with micropillars
Tribology International 83 (2015) pp. 42–50, DOI: 10.1016/j.triboint.2014.10.009 - Nassauer, B., Kuna, M.: Impact of micromechanical parameters on wire sawing: a 3D discrete element analysis, Comp. Part. Mech. (2015) pp. 2:63–71
DOI: 10.1007/s40571-015-0036-9 - Rasche, S., Kuna, M.: Improved small punch testing and parameter identification of ductile to brittle materials, Int. Journal of Pressure Vessels and Piping, Volume 125 (2015) pp. 23–34
DOI: 10.1016/j.ijpvp.2014.09.001 - Seupel, A., Kuna, M.: Application of a Local Continuum Damage Model to Porous TRIP-Steel, Applied Mechanics and Materials Vol. 784 (2015) pp. 484-491
DOI: 10.4028/www.scientific.net/AMM.784.484 - Storm, J., Abendroth, M., Kuna, M.: Influence of curved struts, anisotropic pores and strut cavities on the effective elastic properties of open-cell foams
Mechanics of Materials 86 (2015) pp. 1–10, DOI: 10.1016/j.mechmat.2015.02.012 - Zhang, D., Abendroth, M., Kuna, M., Storm, J.: Multi-axial brittle failure criterion using Weibull stress for open Kelvin cell foams, International Journal of Solids and Structures (2015)
DOI: 10.1016/j.ijsolstr.2015.04.020
Tagungsbeiträge
- Burgold, A., Kuna, M.: Beanspruchungsanalyse von Rissen in TRIP-Stählen und der Einfluß der Phasenumwandlung, Stress analysis of cracks in TRIP-steels and influence of phase transformation, 47. DVM Arbeitskreis Bruchvorgänge, 19.-11.02.2015, DVM-Bericht 247 (2015) pp. 209-218, ISSN 1616-4687
- Henkel, S., Liebelt, E., Zybell, L., Ackermann, S., Biermann, H.: Untersuchungen zum Einfluss von Überlasten auf das zyklische Risswachstumsverhalten der Aluminiumlegierung 6061 bei unterschiedlichen T-Spannungen, Influence of overloads on the cyclic crack growth behaviour of the aluminium alloy 6061 at different T-stresses
47. DVM Arbeitskreis Bruchvorgänge, 19.-11.02.2015, DVM-Bericht 247 (2015) pp. 199-208, ISSN 1616-4687 - Horn, M., Zybell, L., Kuna, M., Helfen, L., Morgeneyer, T. F.: Untersuchung der duktilen Versagensmechanismen in Gusseisen unter Schubbeanspruchung mittels Röntgenlaminographie
Investigation of ductile Failure mechanisms in cast iron under shear loading by means of x-Ray laminigraphy, 47. DVM Arbeitskreis Bruchvorgänge, 19.-11.02.2015
DVM-Bericht 247 (2015) pp. 177-178, ISSN 1616-4687 - Kozinov, S., Kuna, M.: Anwendung eines elektromechanischen Kohäsivzonenmodells auf ferroelektrische Aktuatoren, Electromechanical cohesive zone model applied to ferroelectric actuators, 47. DVM Arbeitskreis Bruchvorgänge, 19.-11.02.2015, DVM-Bericht 247 (2015) pp. 3-14, ISSN 1616-4687
- Kozinov, S., Kuna, M.: Micromechanical simulation of ferroelectric domain process at crack tip, Proceedings des 11th International Workshop "Direct and Inverse Problems in Piezoelectricity" (2015) p. 8
- Kozinov, S., Kuna, M.: Numerical Analysis of Fracture of Pre-stressed ferroelectric actuator taking into account cohesive zone for damage accumulation
SMART (2015) , Ponta Delagda, Portuga - Kuna, M.: 40 Jahre Finite Elemente in der Bruchmechanik - Historische Rückblicke und Einsichten, 40 years finite elements in fracture mechanics - historical reviews and insights
47. DVM Arbeitskreis Bruchvorgänge, 19.-11.02.2015, DVM-Bericht 247 (2015) pp. 1-2, ISSN 1616-4687 - Kuna, M., Seupel, A.: A Phenomenological Damage Model for Elastoplastic Behavior of Particle Reinforced TRIP-Steel Matrix Composites based on Micromechanical Simulations
CFRAC (2015) Cachan, Frankreich - Roth, S., Kuna, M.: Assessment of Size-Dependent Fatigue Failure Modes Using a Cyclic Cohesive Zone Model
CFRAC (2015) Cachan, Frankreich - Seupel, A., Kuna, M.: Erweiterung eines duktilen Schädigungsmodells zur Beschreibung von TRIP-Stählen, An ectended material model for ductile damage of TRIP-Steels
47. DVM Arbeitskreis Bruchvorgänge, 19.-11.02.2015, DVM-Bericht 247 (2015) pp. 83-92 - Zybell, L., Horn, M., Kuna, M., Helfen, L., Morgeneyer, T. F.: In situ 3D observation of ductile failure mechanisms in cast iron under shear loading
CFRAC (2015) Cachan, Frankreich
Bücher / Buchbeiträge
- Abendroth, M.: A unified approach to identify material properties from small punch test experiments, IN: Functional structure design of new high-performance materials via atomic design and defect engineering -- ADDE Rafaja, D. (ed.) SAXONIA (2015) pp. 288-305, ISBN 978-3-934409-68-2
- Budnitzki, M., Behm, T., Kuna, M., Möller, H. J.: Experimental and numerical investigations on the formation of surface defects during machining
of silicon wafers, IN: Functional structure design of new high-performance materials via atomic design and defect engineering -- ADDE Rafaja, D. (ed.) SAXONIA (2015) pp. 42-62
ISBN 978-3-934409-68-2 - Roth, S, Hoffmann, M., Skupsch, C., Kuna, M., Biermann, H., Chaves, H.: Experimental and numerical assessment of protective coatings deposited by high velocity oxygen fuel flame spraying: Spraying process and thermomechanical behavior, IN: Functional structure design of new high-performance materials via atomic design and defect engineering -- ADDE Rafaja, D. (ed.) SAXONIA (2015) pp. 224-240, ISBN 978-3-934409-68-2
Dissertationen / Habilitationen
- Nassauer, B.: Entwicklung einer 3D Diskrete Elemente Methode mit polyederförmigen Partikeln zur Simulation der fluidgekoppelten Prozesse beim Drahtsägen - Dissertation
TU Bergakademie Freiberg, Berichtsband IMFD Heft 19 (2015), ISBN 978-3-86012-500-7 - Zhang, D.: Multi-axial brittle failure criteria for open Kelvin cell foams - Dissertation, TU Bergakademie Freiberg, Berichtsband IMFD Heft 21 (2015), ISBN 978-3-86012-520-5
Fachzeitschriften
- Bäcker, D., Kuna, M., Häusler, Chr.: Eigenfunctions of Crack Problems in the Mindlin Plate Theory, ZAMM, Z. Angew. Math. Mech. (2014) pp. 1–13,
DOI: 10.1002/zamm.20130025 - Burgold, A., Kuna, M., Prüger, S.: Material Forces in Consideration of Phase Transformation in TRIP-Steel, Procedia Materials Science 3 (2014) pp. 461-466,
DOI: 10.1016/j.mspro.2014.06.077 - Hütter, G., Linse, T., Roth, St., Mühlich, U., Kuna, M.: A Modeling Approach for the Complete Ductile–Brittle Transition Region Cohesive Zone in Combination with a Non-Local Gurson-Model, International Journal Fract. (2014) pp. 185:129–153, DOI: 10.1007/s10704-013-9914-4
- Hütter, G., Zybell, L., Kuna, M.: Micromechanical Modeling of Crack Propagation with Competing Ductile and Cleavage Failure, Procedia Materials Science 3 (2014) pp. 428-433
DOI: 10.1016/j.mspro.2014.06.072 - Hütter, G., Zybell, L., Kuna, M.: Size Effects due to Secondary Voids During Ductile Crack Propagation, International Journal of Solids and Structures 51 (2014) pp. 839-847
DOI: 10.1016/j.ijsolstr.2013.11.012 - Kozinov, S., Kuna, M., Roth, St.: A Cohesive Zone Model for the Electromechanical Damage of Piezoelectric/Ferroelectric Materials, Smart Mater. Struct. 23 (2014) 055024 (13pp)
DOI: 10.1088/0964-1726/23/5/055024 - Kuna, M., Bäcker, D.: A PVDF Sensor for the In-Situ Measurement of Stress Intensity Factors During Fatigue Crack Growth, Procedia Materials Science 3 ( 2014 ) pp. 473-478
DOI: 10.1016/j.mspro.2014.06.079 - Linse, T., Kuna, M., Viehrig, H.-W.: Quantification of Brittle-Ductile Failure Behavior of Ferritic Reactor Pressure Vessel Steels Using the Small-Punch-Test and Micromechanical Damage Models, Materials Science and Engineering: A 614 (2014) pp. 136-147, DOI: 10.1016/j.msea.2014.05.095
- Nassauer, B., Hess, A., Kuna, M.: Numerical and Experimental Investigations of Micromechanical Processes During Wire Sawing, International Journal of Solids and Structures 51 (2014) pp. 2656-2665, DOI: 10.1016/j.ijsolstr.2014.03.040
- Prüger, S., Seupel, A., Kuna, M.: A Thermomechanically Coupled Material Model for TRIP-Steel, International Journal of Plasticity 55 (2014) pp. 182–197
DOI: 10.1016/j.ijplas.2013.10.005 - Rabold, F., Kuna, M.: Automated Finite Element Simulation of Fatigue Crack Growth in Three-Dimensional Structures with the Software System ProCrack, 20th European Conference on Fracture (ECF20) - Procedia Materials Science 3 ( 2014 ) pp. 1099–1104, Doi: 10.1016/j.mspro.2014.06.179
- Rasche, St., Strobl, St., Kuna, M., Bermejo, R., Lube, T.: Determination of Strength and Fracture Toughness of Small Ceramic Discs Using the Small Punch Test and the Ball-on-three-balls Test, Procedia Materials Science 3 ( 2014 ) pp. 961–966, DOI: 10.1016/j.mspro.2014.06.156
- Roth, S., Hütter, G., Kuna, M.: Simulation of Fatigue Crack Growth with a Cyclic Cohesive Zone Model; International Journal of Fracture, Springer Netherlands Vol. 188 (2014), pp. 23-45
DOI: 10.1007/s10704-014-9942-8 - Roth, St., Kuna, M.: Fatigue Modelling with a Cyclic Cohesive Zone Approach, Procedia Materials Science 3 ( 2014 ) pp. 325–330, DOI: 10.1016/j.mspro.2014.06.056
- Soltysiak, S., Abendroth, M., Kuna, M., Klemm, Y., Biermann, H.: Strength of Fine Grained Carbon-Bonded Alumina (Al2O3-C) Materials Obtained by Means of the Small Punch Test, Ceramics International (2014), DOI: 10.1016/j.ceramint.2014.02.030
- Soltysiak, S., Selent, M., Roth, S., Abendroth, M., Hoffmann, M., Biermann, H., Kuna, M.: High-Temperature Small Punch Test for Mechanical Characterization of a Nickel-Basesuperalloy, Materials Science & Engineering A, Volume 613, (8. September 2014) pp. 259–263, DOI: 10.1016/j.msea.2014.06.105
- Wang, Y.-Z., Kuna, M.: General Solutions of Mechanical-Electric-Magnetic Fields in Magneto-Electro-Elastic Solid Containing a Moving Anti-Plane Crack and a Screw Dislocation, ZAMM , Z. Angew. Math. Mech., 1 – 11 (2014), DOI: 10.1002/zamm.201300279
- Wang, Y.-Z., Kuna, M.: Screw Dislocation in Functionally Graded Magnetoelectroelastic Solids, Philosophical Magazine Letters (2014) Vol. 94, No. 2, pp. 72–79
DOI: 10.1080/09500839.2013.861089 - Wang, Y.-Z., Kuna, M.: Time-Harmonic Dynamic Green's Functions for Two-Dimensional Functionally Graded Magnetoelectroelastic Materials, Journal of applied physics 115, 043518 (2014), DOI: 10.1063/1.4862757
- Zybell, L., Selent, M., Hübner, P., Kuna, M.: Overload Effects During Fatigue Crack Growth in Nodular Cast Iron-Simulation with an Extended Strip-Yield Model, 20th European Conference on Fracture (ECF20) - Procedia Materials Science 3 (2014) pp. 221–226, DOI: 10.1016/j.mspro.2014.06.039
- Zybell, L., Hütter, G., Linse, T., Mühlich, U., Kuna, M.: Size Effects in Ductile Failure of Porous Materials Containing Two Populations of Voids, European Journal of Mechanics / A Solids (2014), Volume 45, May–June 2014, pp. 8–19, DOI: 10.1016/j.euromechsol.2013.11.006
Tagungsbeiträge
- Bäcker, D., Kuna, M. , Häusler, C.: Measurement of Kirchhoff's Stress Intensity Factors in Bending Plates, Proc. SPIE 9061, Sensors and Smart Structures Technologies for Civil,
Mechanical and Aerospace Systems 2014, 90611Q (2014), DOI: 10.1117/12.2044472 - Hein, J., Kuna, M.: Thermoelastisches J-Integral für gradierte und temperaturabhängige Materialien
DVM-Bericht 246 (2014) pp. 43-52 - Henkel, S., Zybell, L., Mottischka, T., Hahn, P., Biermann, H., Kuna, M.: Einfluss von rissparalellen Zusatzbeanspruchungen und Überlasten auf das zyklische Risswachstumsverhalten von duktilem Guseisen mit Kugelgraphit, DVM-Bericht 246 (2014) pp. 61-70
- Hensl, Th., Mühlich, U., Budnitzki, M., Kuna, M.: An Eigenstrain Approach to Predict Phase Transformation and Twinning in Partially Stabilized Zirconia (PSZ), EMMC14-European Mechanics of Materials Conference, Gothenburg August 27-29 (2014)
- Hütter, G., Zybell, L., Kuna, M.: Mirkomechanische Simulation der Rissausbreitung in Gusseisen mit Kugelgraphit im gesamten spröd-duktilen Übergangsbereich
DVM-Bericht 246 (2014) pp. 177-186 - Kozinov, S., Roth, S., Kuna, M.: Development of a Cohesive Model for Damage Simulation in Ferroelectric Materials Subjected to Electromechanical Loading, In: 11th World Congress on Computational Mechanics (WCCM XI), Ed. by Onate E., Oliver J. and Huerta A.; (2014) pp. 4320-4331
- Kozinov, S., Kuna, M., Roth, St.: Numerische Simulation der Rissinitiierung und des Risswachstums in piezoelektrischen Stapelaktuatoren
DVM-Bericht 246 (2014) pp. 53-54 - Kuna, M., Nassauer, B.: Configurational Forces Concept for Spatial Crack Configurations in Ferroelectric Materials, Proceedings of the second seminar on the mechanics of multifunctional materials (2014) Bad Honnef, pp. 61-64
- Menzer, M., Kuna, M.: Damage Identification in Two-Dimensional Structures using Lamb Waves, Proc. SPIE 9061, Sensors and Smart Structures Technologies for Civil, Mechanical and Aerospace Systems (2014), DOI: 10.1117/12.2042770
- Roth, S., Hütter, G., Kuna, M.: FE-Simulation des Ermüdungsrisswachstums mithilfe eines zyklischen Kohäsivgesetzes
DVM-Bericht 246 (2014) pp. 187-196 - Roth, St., Kuna, M.: Modelling of Fatigue Crack Growth with a Cohesive Zone Model Approach Including a Local Endurance Limit, Proceedings of the 3rd International Conference on Computational Modeling of Fracture and Failure of Material and Structures, CRFAC, Praha (2013) p. 93
- Selent, M., Soltysiak, S., Roth, S., Abendroth, M., Hoffmann, M., Kuna, M.: Mechanical Characterisation of a Thermally Sprayed Nickel-base Superalloy by Means of the High Temperature Small Punch Test, 3rd International Conference SSTT (Small Sample Test Techniques), 23.-25.09.2014, Seggau, Austria, Conference Proceedings (2014) pp. 98-111
- Seupel, S., Kuna, M.: Simulation of Damage Mechanisms in TRIP-Steel Matrix Composites, Materials Science Engineering Congress in Darmstadt, 23.-25.09.2014 (Poster)
- Soltysiak, S., Abendroth, M., Kuna, M.: Determination of Tension Compression Anisotropy of Fine Grained Carbon Bonded Alumina by Means of the Small Punch Test and the Miniaturized Compression Test, In: Proceedings of the 3rd International Conference SSTT (2014) - 23.-25.09.2014, Seggau (AUT), ISBN: 978-80-260-6722
Dissertationen / Habilitationen
- Budnitzki, M.: Constitutive Modeling and Experimental Investigations of Phase Transitions in Silicon Under Contact Loading - Dissertation, TU Bergakademie Freiberg, Berichtsband IMFD Heft 17 (2014), ISBN 978-3-86012-493-2
- Mühlich, U.: Generalised Continuum Approach for Modelling Quasi-Brittle Failure - Habilitation, TU Bergakademie Freiberg, Berichtsband IMFD Heft 15 (2014), ISBN 978-3-86012-479-6
Forschungsberichte
- Gloger, D.: Zeitliche Interpolation der abgetasteten Globallösung und nötige Elementkantenlänge für einen Mantellinienfall, Institutsbericht zum Industrieforschungsprojekt,
TU Bergakademie Freiberg (2014)
Fachzeitschriften
- Bäcker, D., Häusler, Chr., Kuna, M.: Ein Sensorenkonzept zur In-situ-Rissüberwachung in plattenartigen Strukturen - Materials Testing 55 (2013) 11-12 pp. 830-840
- Hütter, G., Linse, T., Mühlich, U., Kuna, M.: Simulation of ductile crack initiation and propagation by means of a non-local Gurson-model - International Journal of Solids and Structures 50 (2013) pp. 662-671 - DOI: 10.1016/j.ijsolstr.2012.10.031
- Hütter, G., Zybell, L., Mühlich, U. , Kuna, M.: Consistent Simulation of Ductile Crack Propagation with Discrete 3D Voids - Computational Materials Science 80 (2013) pp. 61-70 - DOI: 10.1016/j.commatsci.2013.04.013
- Koch, F., Enderlein, M., Pietrzyk, M.: Simulation of the temperature field and the microstructure evolution during multi-pass welding of L485MB pipeline steel - Computer Methods in Materials Science Vol. 13 (2013) No. 1, pp. 173-180 - Publishing House AKAPIT, Krakow ISSN 1641-8581
- Koch, F., Enderlein, M., Roßmann, J.: Welding under pressure - Critical aspects with regard to welding on operating high-pressure gas pipelines - Düsseldorf ISSN 1612-3433 Welding and Cutting Vol. 5 (2013) DVS Media GmbH
- Liedke, Th., Kuna, M.: Discrete element simulation of micromechanical removal processes during wire sawing - Wear 304 (2013) pp. 77–82 - DOI: 10.1016/j.wear.2013.04.026
- Mehlhorn, L., Mühlich, U., Kuna, M.: - A material model of particle size dependent transformation plasticity of psz ceramics under thermomechanical loading - Advanced Engineering Materials, Vol. 15, Issue 7 (2013) pp. 638-645 - DOI: 10.1002/adem.201200375
- Mühlich, U., Zybell, L., Hütter, G., Kuna, M.: A first-order strain gradient damage model for simulating quasi-brittle failure in porous elastic solids - Archive of Applied Mechanics, Vol. 83, Issue 6 (2013) pp. 955-967 - DOI: 10.1007/s00419-013-0729-6
- Nassauer, B., Kuna, M.: Contact forces of polyhedral particles in discrete element method - Granular Matter Vol. 15, No. 3 (2013) pp. 349-355 - DOI: 10.1007/s10035-013-0417-9
- Nassauer, B., Liedke,T., Kuna,M.: Polyhedral particles for the discrete element method - Geometry representation, contact detection and particle generation - Granular Matter, Vol. 15, No. 1 (2013) pp. 85-93 - DOI: 10.1007/s10035-012-0381-9
- Prüger, S., Mehlhorn, L., Mühlich, U., Kuna, M.: Study of Reinforcing Mechanisms in TRIP-Matrix Composites under Compressive Loading by Means of Micromechanical Simulations - Advanced Engineering Materials, Vol. 15, Issue 7 (2013) pp. 542-549 - DOI: 10.1002/adem.201200323
- Sieber, T., Liedke, T., Mühlich, U., Ballani, F.: The Influence of Varying Cell Sizes on the Tensile Behaviour of Open-Cell Foams
Materials Performance and Characterization, Vol. 2, No. 1, (2013) pp. 1-14 - ISSN: 2165-3992 - DOI: 10.1520/MPC20120028 - Soltysiak, S., Abendroth, M., Kuna, M., Dudczig, S.: Influence of the Cabores content on the toughness of carbon bonded alumina (Al2O3-C) - Advanced Engineering Materials 15-12 (2013) pp.1231 -1234 - DOI: 10.1002/adem.201300173
- Storm, J., Abendroth, M., Zhang, D., Kuna, M.: Geometry dependent effective elastic properties of open-cell foams based on Kelvin cell models - Advanced Engineering Materials Vol. 15-12 (2013) pp. 1292–1298 - DOI: 10.1002/adem.201300141
- Storm, J., Abendroth, M., Emme, M., Liedke, Th., Ballaschk, U., Voigt, C., Sieber, T., Kuna, M.: Geometrical modelling of foam structures using implicit functions - International Journal of Solids and Structures, Vol. 50, 3-4, February (2013) pp. 548-555 - DOI: 10.1016/j.ijsolstr.2012.10.026
- Voigt, C., Storm, J., Aneziris, C.G., Abendroth, M., Kuna, M., Hubalkova, J.: The influence of the measurement parameters on the crushing strength of reticulated ceramic foams - Journal of Materials Research Vol. 28-17 (2013), pp. 2288-2299 - DOI: 10.1557/jmr.2013.96
Tagungsbeiträge
- Abendroth, M., Enderlein, M.: Numerische Ermittlung der Rissspitzenbeanspruchung, Fallbeispiele - DGM-Fortbildungsseminar: Bruchmechanische Berechnungsmethoden (2013) Freiberg
- Abendroth, M., Enderlein, M.: Rissmodellierung und bruchmechanische Analyse mit ABAQUS - DGM-Fortbildungsseminar: Bruchmechanische Berechnungsmethoden (2013) Freiberg
- Bäcker, D., Kuna, M.: Alternative sensor design for monitoring fatigue crack growth - 9th International Workshop on Direct and Inverse Problems in Piezoelectricity (2013) Weimar
- Bäcker, D., Kuna, M. , Häusler, C.: Piezoelectric sensor for in situ measurement of stress intensity factors - 5th International Symposium on Piezocomposite Applications (2013) Dresden
- Enderlein, M.: Ermüdungsrisswachstum - DGM-Fortbildungsseminar: Bruchmechanische Berechnungsmethoden (2013) Freiberg
- Gloger, D., Enderlein, M., Kuna, M.: Error Analysis for Submodels with Cracks: Extension to Elastic-Plastic Material - Proceedings of the 3rd International Conference on Computational Modeling of Fracture and Failure of Material and Structures (2013) p. 99
- Hein, J.; Kuna, M.: Arbeitsbericht/Poster zum SPP 1418 FIRE-Projekt KU 929/16-2 Numerische Beanspruchungsanalysen und bruchmechanische Festigkeitskriterien zur Optimierung der Thermoschockbeständigkeit von gradierten und geschichteten Strukturen aus Feuerfestwerkstoffen - Freiberger Feuerfestforum, Freiberg, (27.11.2013)
- Hütter, G., Linse, T., Mühlich, U., Kuna, M.: Integrated Damage Mechanics Approach to Brittle and Ductile Crack Propagation - Proceeding of the 13th International Conference on Fracture (2013) Beijing
- Hütter, G., Linse, T., Mühlich, U., Kuna, M.: Simulation der Rissausbreitung im gesamten spröd-duktilen Übergangsbereich - DVM-Bericht 245 (2013) pp. 49-58
- Koch, F., Enderlein, M., Kuna, M., Hübner, P.: Residual stress analysis of in-service welded gas pipelines - Proceedings of the ASME 2013 - Pressure Vessels & Piping Division Conference, PVP2013-97585 Paris, France,(July 14-18, 2013) www.asme.org
- Kuna, M.: FEM-Techniken zur Rissanalyse im Rahmen der Elastisch Plastische Bruchmechanik (EPBM) - DGM-Fortbildungsseminar: Bruchmechanische Berechnungsmethoden (2013) Freiberg
- Kuna, M.: Rissspitzenbeanspruchung (K,J, CTOD) - DGM-Fortbildungsseminar: Bruchmechanische Berechnungsmethoden (2013) Freiberg
- Linse, T., Kuna, M.: Application of damage models to the ductile-brittle transition region of reactor steels - ICF13 Beijing (2013)
- Mühlich, U.: Grundlagen der FEM - DGM-Fortbildungsseminar: Bruchmechanische Berechnungsmethoden (2013) Freiberg
- Nassauer, B., Kuna, M.: A discrete element method for polyhedral particles - Proceedings of the III International Conference on Particle based Methods - Fundamentals and Applications (Particles 2013) Stuttgart, Germany - September 18-20 (2013) pp. 681-690 - ISBN: 978-84-941531-8-1
- Nassauer, B., Kuna, M.: Discrete Element Simulation of Wire Sawing with Polyhedral Particles - Freiberger Forschungsforum, 1st Freiberg Sawing Symposium, June 13-14 (2013)
- Rabold, F., Kuna, M.: PROCRACK - A Software Tool for Finite Element Simulation of Three-Dimensional Fatigue Crack Growth - Proceedings of the 3rd International Conference on Computational Modeling of Fracture and Failure of Material and Structures (2013) p. 186 - ISBN: 978-80-01-05279-2
- Roth, S., Kuna, M.: Finite Element Analyses of Fatigue Crack Growth Under Small Scale Yielding Conditions Modelled with a Cyclic Cohesive Zone Approach In: Onate, E., Owen, D.R.J., Peric, D. and Suarez, B. (eds.) Computational Plasticity XII - Fundamentals and Applications - COMPLAS XII (2013) pp. 1075-1086, CIMNE, Barcelona - ISBN 978-84-941531-5-0
- Selent, M., Zybell, L., Hübner, P., Kuna, M.: Berechnung von Reihenfolgeeffekten in Gusseisen mit Kugelgraphit mit einem erweiterten Fließstreifenmodell - DVM-Bericht 245 (2013) pp. 177-186
- Soltysiak, S., Abendroth, M., Kuna, M.: Influence of the Cabores content on the strength of carbon bonded alumina obtained by means of Small Punch Test - Proceedings of the Unified International Technical Conference on Refractories - Unitecr 2013, (eds D. G. Goski and J. D. Smith), John Wiley &Sons, Inc., Hoboken, NJ, USA, September 10-13 (2013) pp. 135-140 - Victoria (Canada) - DOI 10.1002/9781118837009.ch24
- Soltysiak, S., Abendroth, M., Kuna, M., Dudczig, S.: Influence of the microstructure on the fracture behavior of carbon bonded alumina - Key Engineering Materials, Special Issue, Proceedings of MSMF7, 01-03 July 2013 - 592-593 (2014) pp. 279-282, Brno (Czech Republik) - DOI 10.4028/www.scientific.net/KEM.592-593.279
- Storm, J., Abendroth, M., Kuna, M.: Geometry dependent effective heat conductivity of open-cell foams based on Kelvin cell models - Unitecr (2013) Conference Proceedings
- Zybell, L.: FEM-Techniken zur Rissanalyse im Rahmen der Linear-Elastischen Bruchmechanik (LEBM) - DGM-Fortbildungsseminar: Bruchmechanische Berechnungsmethoden (2013) Freiberg
- Zybell, L., Hütter, G., Mühlich, U., Kuna, M.: Mikromechanische Simulation der duktilen Rissinitiierung in Gusseisen mit Kugelgraphit - DVM-Bericht 245 (2013) pp. 243-252
- Zybell, L., Selent, M., Hübner, P., Kuna, M.: An extended strip yield model for the calculation of overload effects during fatigue crack growth in nodular cast iron - Proceedings of the Thirteenth International ASTM/ESIS - Symposium on Fatigue and Fracture Mechanics (2013), Jacksonville, Florida
Dissertationen / Habilitationen
- Bäcker, D.: Entwicklung eines Sensors auf der Basis piezoelektrischer Polymerfolien zur in-situ Messung von Spannungsintensitätsfaktoren bei Ermüdungsrisswachstum - Dissertation, TU Bergakademie Freiberg (2013) - ISBN: 978-3-86012-458-1
- Hütter, G.: Multi-Scale Simulation of Crack Propagation in the Ductile-Brittle Transition Region - Dissertation, TU Bergakademie Freiberg (2013) - ISBN: 978-3-86012-463-5
- Ludwig, C.: Analytische, numerische und experimentelle Untersuchungen zum chemisch-mechanischen Polieren von Siliziumwafern - Dissertation, TU Bergakademie Freiberg (2013) - ISBN 978-3-86012-411-6
- Rasche, St.: Bestimmung von Materialparametern der elastisch-plastischen Verformung und des spröden Versagens aus Small-Punch-Kleinstproben - Dissertation, TU Bergakademie Freiberg (2013) - ISBN 978-3-86012-457-4
- Zencker, U.: Entwicklung rechnerischer und experimenteller Methoden zur Sicherheitsbewertung von Transport- und Lagerbehältern aus gering duktilem Gusseisen bei Stoßbelastung - Dissertation, TU Bergakademie Freiberg (2013) - ISBN 978-3-86012-468-0
Bücher / Buchbeiträge
- Kuna, M.: Finite Elements in Fracture Mechanics; Theory - Numerics – Applications - Series: Solid Mechanics and its Applications, Vol. 201 - Springer (2013) Hardcover and eBook - ISBN 978-94-007-6680-8
- Rabold, F., Kuna, M., Leibelt, T.: PROCRACK: A Software for Simulating Three-Dimensional Fatigue Crack Growth In: Advanced Finite Element Methods and Applications, Ed. T. Apel, O. Steinbach Springer Verlag, Berlin-Heidelberg (2013) pp. 355-374 - ISBN: 978-364230315-9
Forschungsberichte
- Gloger, D.: Bestimmung der nötigen Abtastfrequenz der Globallösung für den Fall eines CASTOR-Behälters aus 1 m Höhe auf einen Dorn - Institutsbericht zum Industrieforschungsprojekt, TU Bergakademie Freiberg (2013)
- Gloger, D.: Fehlerbetrachtung für Submodelle mit Riss bei statischer und dynamischer Simulation - Institutsbericht zum Industrieforschungsprojekt, TU Bergakademie Freiberg (2013)
- Gloger, D.: Nötige Abtastfrequenz der Globallösung für Dornfall, Risse an äußerer Behälteroberfläche und Fehlerbetrachtung für Submodelle mit Riss für plastisches Material - Institutsbericht zum Industrieforschungsprojekt, TU Bergakademie Freiberg (2013)
Fachzeitschriften
- Budnitzki, M., Kuna, M.: A thermomechanical constitutive model for phase transformations in silicon under pressure and contact loading conditions - International Journal of Solids and Structures, 49 (11-12) (2012) pp. 1316-1324 - DOI: 10.1016/j.ijsolstr.201202004
- Budnitzki, M., Kuna, M.: Modeling silicon under contact loading conditions: aspects of non associated flow - Technische Mechanik, 32 (2) (2012) pp.146-154
- Hein, J., Scheithauer, U., Haderk, K., Kuna, M., Michaelis, A.: Prospects of a New Generation of Refractories Made by Ceramic Multilayer - Technology Refractories Manual 2 (2012) pp. 91-95
- Hein, J., Storm, J., Kuna, M.: Numerical thermal shock analysis of functionally graded and layered materials - International Journal of Thermal Sciences 60 (2012) pp. 41-51 - DOI: 10.1016/j.ijthermalsci.201205005
- Hein, J., Kuna, M.: Optimizing thermal shock resistance of layered refractories - WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim - Advanced Engineering Materials 14 (2012) Issue 6 pp. 408-415 - DOI: 10.1002/adem.201100283
- Hütter, G., Zybell, L., Mühlich, U., Kuna, M.: Ductile Crack Propagation by Plastic Collapse of the Intervoid Ligaments - International Journal of Fracture, 176 (2012) pp. 81-96 - DOI: 10.1007/s10704-012-9728-9
- Koch F., Enderlein, M.: Experimental and numerical analysis of multi-pass welding - Computer Methods in Materials Science Vol. 12 No. 2 (2012) pp. 104-112 - Publishing House AKAPIT, Krakow - ISSN 1641-8581
- Koch, F., Enderlein, M., Roßmann, J.: Schweißen unter Druck: Kritische Aspekte beim Schweißen an in Betrieb befindlichen Gashochdruckleitungen - Der Praktiker 5 (2012) pp. 186 - 188 - DVS Media GmbH, Düsseldorf - ISSN 0554-9965
- Koch, F., Enderlein, M., Roßmann, J.: Untersuchung des Festigkeitsverhaltens beim Schweißen druckbelasteter Gashochdruckleitungen - gwf / Gas Erdgas 4 (2012) pp. 244 – 247 - Oldenbourg Industrieverlag, München - ISSN 0016-4909
- Li, Q., Kuna, M.: Inhomogeneity and material configurational forces in three dimensional ferroelectric polycrystals - European Journal of Mechanics A/Solids 31 (2012) pp. 77-89 - DOI: 10.1016/j.euromechsol.201107004
- Li, Q., Kuna, M.: Evaluation of electromechanical fracture behavior by configurational forces in cracked ferroelectric polycrystals - Computational Materials Science 57 (2012) pp. 94-101 - DOI: 10.11016/j.commatsci.201101050
- Linse, T., Hütter, G., Kuna, M.: Simulation of crack propagation using a gradient-enriched ductile damage model based on dilatational strain - Engineering Fracture Mechanics 95 (2012) pp. 13-28 - DOI: 10.1016/j.engfracmech.2012.07.004
- Ludwig, C., Kuna, M.: An analytical approach to determine the pressure distribution during chemical mechanical polishing - Journal of Electronic Materials 41/9 (2012) pp. 2606-2612 - DOI: 10.1007/s11664-012-2151-1
- Mühlich, U., Zybell, L., Kuna, M.: Estimation of material properties for linear elastic strain gradient effective media - European Journal of Mechanics - A/Solids 31 (2012) pp. 117-130 - DOI: 10.1016/j.euromechsol.2011.06.011
- Mottitschka, T., Pusch, G., Biermann, H., Zybell, L., Kuna, M.: Influence of graphite spherical size on fatigue behaviour and fracture toughness of ductile cast iron EN GJS-400-18LT - International Journal of Materials Research 103 (2012) 1-10
- Prüger S., Mehlhorn L., Soltysiak S., Kuna M.: Influence of material and interface properties on the transformation behaviour of particle reinforced TRIP-matrix composites - Computational Materials Science 64 (2012) pp. 273 - 277 - DOI: 10.1016/j.commatsci.2012.04.031
- Roth, S., Hütter, G., Mühlich, U., Nassauer, B., Zybell, L., Kuna, M.: Visualisation of User Defined Finite Elements with ABAQUS/Viewer - GACM Report (2012) pp. 7-14
- Storm, J., Hein, J., Kuna, M.: Numerical Study to Optimize Thermal Shock Resistance of a FGM Nozzle refractories - WOLRDFORUM 4 (2012) [1] pp. 175-180
- Wippler, K., Kuna, M.: Application of the Θ-method to 3D BEM analysis of cracks in piezoelectric components - Key Engineering Materials Vol. 488-489 (2012) pp. 363-366 DOI: 10.4028/www.scientific.net/KEM.488-489.363
- Zybell, L., Chaves, H., Kuna, M., Mottitschka, T., Henkel, S., Pusch, G., Biermann,H.: Microstructural investigations of crack path development in nodular cast iron under variable amplitude loading - In: Proceedings Crack Path 4, Gaeta (2012)
- Zybell, L., Chaves, H., Kuna, M., Mottitschka, T., Pusch, G., Biermann, H.: Optical in situ investigations of overload effects during fatigue crack growth in nodular cast iron - Engineering Fracture Mechanics 95 (2012) pp. 45-56 - DOI: 10.1016/j.engfracmech.2012.01.006
- Zybell, L., Mühlich, U., Kuna, M., Zhang, Z. L.: A three-dimensional finite element for gradient elasticity based on a mixed-type formulation - Computational Material Science 52 (2012) pp. 268-273 - DOI: 10.1016/j.commatsci.2011.02.026
Tagungsbeiträge
- Abendroth, M., Enderlein, M.: Numerische Ermittlung der Rissspitzenbeanspruchung, Fallbeispiele - DGM-Fortbildungsseminar: Bruchmechanische Berechnungsmethoden (2012) Freiberg
- Abendroth, M., Enderlein, M.: Rissmodellierung und bruchmechanische Analyse mit ABAQUS - DGM-Fortbildungsseminar: Bruchmechanische Berechnungsmethoden (2012) Freiberg
- Bäcker, D., Häusler, C., Kuna, M.: A piezoelectric PVDF film based sensor for monitoring fatigue crack growth in thin plates subjected to bending - 8th International Workshop on Direct and Inverse Problems in Piezoelectricity, (2012) Grasellenbach
- Burgold, A., Hütter, G., Zybell, L., Mühlich, U. , Kuna, M.: Mikromechanische Simulation des duktilen Risswachstums durch plastischen Kollaps - DVM-Bericht 244 (2012) pp.191-200
- Enderlein, M.: Ermüdungsrisswachstum - DGM-Fortbildungsseminar: Bruchmechanische Berechnungsmethoden (2012) Freiberg
- Gloger, D., Enderlein, M., Kuna, M.: Error analysis for FEM analysis of cracks using submodels. Proceedings of the ASME 2012 Pressure Vessels & Piping Division Conference, PVP2012-8522 - Toronto, Ontario, CANADA, July 15-19 (2012) www.asme.org
- Hein, J., Kuna, M.: Optimal design of layered refractories for thermal shock resistance - CD-ROM Proceedings of the 6th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012) - September 10-14 (2012) Vienna, Austria - Eds.: Eberhardsteiner, J.; Böhm, H. J.; Rammerstorfer, F.G. - Publisher: Vienna University of Technology, Austria, ISBN: 978-3-9502481-9-7
- Hütter, G., Zybell, L., Mühlich, U., Kuna, M.: 2D and 3D Simulation of Ductile Crack Propagation by Plastic Collapse of Micro-ligaments - Proceeding of the 19th European Conference on Fracture (2012)
- Koch, F., Enderlein, M., Kuna, M.: Simulation der Rohrvorwärmung für das Schweißen an Gashochdruckleitungen - 10. Forum Softwaregestützte Werkzeuge für die Schweißtechnik 12. April 2012 - Halle (Saale) Vortragsband (2012) 27-36
- Kuna, M.: FEM-Techniken zur Rissanalyse im Rahmen der Elastisch Plastische Bruchmechanik (EPBM) - DGM-Fortbildungsseminar: Bruchmechanische Berechnungsmethoden (2012) Freiberg
- Kuna, M.: Rissspitzenbeanspruchung (K,J, CTOD) - DGM-Fortbildungsseminar: Bruchmechanische Berechnungsmethoden (2012) Freiberg
- Kuna, M., Linse, T., Abendroth, M., Rasche, St.: Anwendung von Schädigungsmodellen im Duktilen, Spröden und Übergangsbereich bei Stählen - In: 44. Tagung Arbeitskreis Bruchvorgänge - DVM-Bericht 244 (2012) pp. 211-216
- Mühlich, U.: Grundlagen der FEM - DGM-Fortbildungsseminar: Bruchmechanische Berechnungsmethoden (2012) Freiberg
- Mühlich, U., Kuna, M.: Simulation of quasi-brittle failure by means of a continuum damage model based on first order strain gradient elasticity ECCOMAS 2012 - European Congress on Computational Methods in Applied Sciences and Engineering - e-Book Full (2012) pp.6332-6348
- Nassauer, B., Enderlein, M., Kuna, M.: Three dimensional crack analysis in ferroelectrics using configurational forces concept
ICTAM 2012 - 23rd International Congress of Theoretical and Applied Mechanics - (August 2012) Beijing, China - Prüger S., Mehlhorn L., Mühlich U., Kuna M.: Untersuchung des Verstärkungsmechanismus in partikelverstärkten TRIP-Matrix-Compositen In: Schriftenreihe Werkstoffe und werkstofftechnische Anwendungen, Band 47 - Hrsg.: B. Wielage, Chemnitz (2012) pp.363-369 - ISBN: 978-3-00-039358-7
- Rabold, F., Leibelt, T., Schmatz, S, Kuna, M.: PROCRACK: Ein Programmsystem zur Simulation des Ermüdungsrisswachstums - In: 44. Tagung Arbeitskreis Bruchvorgänge - DVM-Bericht 244 (2012) pp. 171–180
- Sieber, T., Mühlich, U., Liedke, T., Ballani, F.: Simulation des Zugverhaltens von irregulären, offenzelligen Schäumen mit variierender Zellgeometrie - In: Schriftenreihe Werkstoffe und werkstofftechnische Anwendungen, Band 47 - Hrsg.: B. Wielage, Chemnitz (2012) pp. 357-362 - ISBN: 978-3-00-039358-7
- Soltysiak, S., Dudczig, S., Abendroth, M., Kuna, M.: Mechanical and optical characterization of carbon bonded alumina using the Small Punch Test - Proceedings of the Cellular Materials, CellMat, 07-09 November (2012) - Dresden - ISBN 978-3-00-039965-7
- Soltysiak, S., Emmel, M., Behm, T., Abendroth, M., Kuna, M., Aneziris, C.: Mechanical characterization of carbon bonded alumina using the Small Punch Test - 2nd International Conference SSTT (Small Sample Test Techniques) 2012 - 02.-04-10.2012 in Ostrava (2012), ISBN 978-80-260-0079-2
- Storm, J., Liedke, Th., Abendroth, M., Kuna, M.: Generating foam structures using implicit functions - Materials Science Engineering (MSE 2012) Poster
- Trümmel, N., Rabold, F., Kuna, M.: Numerische Simulation zur Rissentstehung und -ausbreitung mithilfe der X-FEM in Abaqus In: 44. Tagung Arbeitskreis Bruchvorgänge - DVM-Bericht 244 (2012) pp. 151-160
- Zybell, L.: FEM-Techniken zur Rissanalyse im Rahmen der Linear-Elastischen Bruchmechanik (LEBM) - DGM-Fortbildungsseminar: Bruchmechanische Berechnungsmethoden (2012) Freiberg
- Zybell, L., Hütter, G., Linse, T., Mühlich, U., Kuna, M.: Nichtlokale Modellierung des duktilen Versagens von Gusseisen mit Kugelgraphit. - In: 44. Tagung Arbeitskreis Bruchvorgänge - DVM-Bericht 244 (2012) pp. 47-56
Dissertationen / Habilitationen
- Linse, Th.: Quantifizierung des spröd-duktilen Versagenverhaltens von Reaktorstählen mit Hilfe des Small-Punch-Test und mikromechanischer Schädigungsmodelle - Dissertation, TU Bergakademie Freiberg (2012) - ISBN 978-3-86012-452-9
Forschungsberichte
- Gloger, D.: Fehlerbetrachtung zur FEM-Analyse von Rissen mit Submodellen mit Hilfe der Gewichtsfunktion des Referenzmodells - Institutsbericht zum Industrieforschungsprojekt - TU Bergakademie Freiberg (2012)
- Hein, J.; Kuna, M.: Arbeitsbericht & Poster zum SPP 1418 FIRE-Projekt KU 929/16-2 - Numerische Beanspruchungsanalysen und bruchmechanische Festigkeitskriterien zur Optimierung der Thermoschockbeständigkeit von gradierten und geschichteten Strukturen aus Feuerfestwerkstoffen - Freiberger Feuerfestforum, Freiberg, 07.12.2012
Patente
- Menzer, M., Häusler, C.: Träger mit einstellbarer Biegesteifigkeit zur Schwingungskompensation - Patent.-Nr. DE 10 2012 208 713.3
- Menzer, M., Häusler, C.: Piezoelektrisch angetriebene Hubkolbenpumpe mit Squiggle-Motor zum Einbau in autonome Funktionsstrukturen - Patent.-Nr. DE 10 2012 012 735.9
- Menzer, M., Häusler, C.: Kompressor zum Einbau in autonome Funktionsstrukturen - Patent.-Nr. DE 10 2012 012 734.0
Fachzeitschriften
- Bäcker, D., Häusler, C., Kuna, M.: Piezoelectric sensor for in situ measurement of stress intensity factors - Proceedings of SPIE, vol. 7981, 79812T (2011)
- Bäcker, D., Ricoeur, A., Kuna, M.: Sensor concept based on piezoelectric PVDF films for the structural health monitoring of fatigue crack growth - SDHM, vol.7, no.1, (2011) pp.1-22
- Budnitzki, M., Kuna, M.: A novel constitutive law for Silicon under contact loading - PAMM (2011)
- Hütter, G., Linse, T., Mühlich, U., Kuna, M.: Simulation of Crack Propagation under Small-Scale Yielding by means of a Non-local GTN-Model - Proceedings in Applied Mathematics and Mechanics 11 (2011) pp. 234-235
- Hütter, G., Mühlich, U. Kuna, M.: Simulation of Local Instabilities during Crack Propagation in the Ductile-brittle Transition Region - European Journal of Mechanics - A/Solids, 30 (2011) pp. 195-203
- Janski, L., Kuna, M.: Adaptive finite element modeling of stationary and propagating cracks in piezoelectric structures - Arch. Mech., 63, 5–6, (2011) pp. 599–619
- Kulawinski, D., Nagel, K., Henkel, S., Hübner, P., Fischer, H., Kuna, M., Biermann, H.: Characterization of stress–strain behavior of a cast TRIP steel under different biaxial planar load ratios - Engineering Fracture Mechanics 78 (2011) pp. 1684–1695
- Li, Q., Ricoeur, A., Kuna, M.: Coulomb traction on a penny-shaped crack in a three dimensional piezoelectric body-Archive of Applied Mechanics 81, 6 (2011) pp. 685-700 - DOI: 10.1007/s00419-010-0443-6
- Liedke T., Kuna, M.: A macroscopic mechanical model of the wire sawing process - International Journal of Machine Tools and Manufacture, Volume 51, Issue 9, September 2011 (2011) pp. 711-720 - DOI: 10.1016/j.ijmachtools.2011.05.005
- Ludwig, C., Chaves, H.: A New Measurement System to Determine Material Properties of Polishing Pads - Journal of Electronic Materials 40 (2011) pp. 2264-2267
- Mehlhorn, L.,Prüger, S., Soltysiak, S., Mühlich, U., Kuna, M.: Influence of Material and Interface Properties on the Overall Behaviour of Particle Reinforced Steel with Focus on the Phase Transformation Capabilities of the Individual Components - Steel Research Int. 82 (2011) no. 9 pp. 1022-1031 - DOI: 10.1002/srin.201100083
- Prüger, S., Kuna, M.: A constitutive model for a high alloyed cast CrMnNi TRIP-steel - Proc. Appl. Math. Mech., WILEY-VCH Verlag (2011) pp. 11, 425-426
- Prüger, S., Kuna, M., Nagel, K., Biermann, H.: Implementation of a material model for a cast TRIP-steel - XI International Conference on Computational Plasticity. Fundamentals and Applications COMPLAS XI, Onate E., Owen, D.R.J., Peric, D. and Suarez, B. (Eds) (2011)
- Prüger, S., Kuna, M., Wolf, S., Krüger, L.: A Material Model for TRIP-Steels and its Application to a CrMnNi Cast Alloy Steel - Steel Research International 82,9 (2011) pp. 82, 1070-1079 - DOI: 10.1002/srin.201100072
- Rasche, S., Kuna, M.: Prediction of fracture toughness of embrittled steels by means of the Small Punch Test - PAMM 11 (2011) pp. 173 – 174 - DOI 10.1002/pamm.201110078
- Roth, S., Kuna, M.: Modelling of interfacial damage and delamination of sprayed coatings with cohesive elements - PAMM Proceedings in Applied Mathematics and Mechanics (2011)
- Sieber, T., Mühlich, U., Liedke, T., Ballaschk, U., Berek, H., Aneziris, C., Ehinger, D., Wolf, S., Krüger, L.: Deformation and failure of open-celled foams made of TRIP-steel-ZrO2- composite material: Experimental observations versus numerical simulations
steel research international 82 (2011) No. 9, pp. 1004-1016 - Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim - DOI: 10.1002/srin.201100089
Tagungsbeiträge
- Bäcker, D., Häusler, C., Kuna, M.: Piezoelektrische Polyvinylidenfluorid - Folien zur Messung bruchmechanischer Kenngrößen - tm - Technisches Messen, 78, Heft 6 (2011)
- Béchet, E., Kuna, M.: Some Numerical Studies with X-FEM for Cracked Piezoelectric Media In: Kuna, M. and Ricoeur, A. (eds.). - IUTAM Symposium on Multiscale Modelling of Fatigue, Damage and Fracture in Smart Materials - IUTAM Bookseries, Vol. 24, Springer Science+Business Media (2011) pp. 141-152
- Gloger, D., Leibelt, T., Kuna, M.: Fehlerbetrachtung zur FEM-Analyse von Rissen mit Submodellen. In: 43. Tagung Arbeitskreis Bruchvorgänge - DVM-Bericht 243 (2011) pp. 75–84
- Hütter, G., Linse, T., Mühlich, U., Kuna, M.: Simulation of Crack Propagation under Small-Scale Yielding by means of a Non-local GTN-Model. In: Proceedings in Applied Mathematics and Mechanics, Band 11 (2011) pp. 234-235
- Hütter, G., Mühlich, U. Kuna, M.: Simulation lokaler Instabilitäten bei der Rissausbreitung im spröd-duktilen Übergangsbereich. In: 43. Tagung Arbeitskreis Bruchvorgänge, DVM-Bericht 243 (2011) pp. 235-244
- Janski, L., Steinhorst, P., Kuna M.:
Crack Propagation Simulations in Piezoelectric Structures with an Efficient Adaptive Finite Element Tool. In: Kuna, M. and Ricoeur, A. (eds.). IUTAM Symposium on Multiscale Modelling of Fatigue, Damage and Fracture in Smart Materials. IUTAM Bookseries, Vol. 24, Springer Science+Business Media (2011) pp. 163-173 - Koch, F., Enderlein, M.: Thermomechanische Simulation des Mehrlagenschweißens druckbelasteter Gashochdruckleitungen. In: SYSWELD-Forum 2011: 25.-26. Oktober 2011 - Weimar Tagungsband (2011) pp. 55-66
- Koch, F., Enderlein, M., Kuna, M., Hübner, P.: Simulation des Mehrlagenschweißens druckbelasteter Gashochdruckleitungen - Kann Modellierung die zfP und zP ersetzen? In: 13. Kolloquium Werkstoff- und Bauteilprüfung in der Schweißtechnik 05. Oktober 2011, Halle (Saale) Vortragsband (2011) pp. 77-86
- Kuna, M., Li, Q.: Configurational forces at three-dimensional cracks in ferroelectric polycrystals - ECCOMAS Int. Conference on Computational Modeling of Fracture and Failure - June 2011, Barcelona, Spain (2011)
- Kuna, M., Linse, T., Abendroth, M., Rasche, S.: Application of damage models in the ductile, brittle and transition region of steels - New Trends in mechanics of material, RFBR-DFG-CNRS Trilateral Scientific Seminar - Moscow, Russia, 26-29 September 2011 (2011) pp. 11-12
- Li, Q., Enderlein, M., Kuna M.: Micromechanical Simulation of Ferroelectric Domain Switching at Cracks. In: Kuna M. and Ricoeur A. (eds.). IUTAM Symposium on Multiscale Modelling of Fatigue, Damage and Fracture in Smart Materials. IUTAM Bookseries, Vol. 24, Springer Science+Business Media (2011) pp. 101-110
- Prüger, S., Kuna, M., Wolf, S., Krüger, L.: A Material Model for TRIP-Steels and its Application to a CrMnNi Cast Alloy Steel Res Int. WILEY-VCH Verlag (2011) pp. 82, 1070-1079
- Roth, S., Kuna, M.: Numerical Study on Interfacial Damage of Sprayed Coatings due to Thermo-Mechanical Fatigue. In: Onate, E., Owen, D.R.J., Peric, D. and Suarez, B. (eds.) - XI International Conference on Computational Plasticity Fundamentals and Applications COMPLAS XI (2011) pp. 1032-1043 - CIMNE, Barcelona - ISBN 978-84-89925-73-1
- Sieber, T., Mühlich, U., Liedke, T., Kuna, M.: Simulation des mechanischen Verhaltens irregulärer, offenzelliger MMC-Schäume mit Hilfe von Balkennetzwerken generiert aus Laguerre-Mosaiken. In: Schriftenreihe Werkstoffe und werkstofftechnische Anwendungen, Band 43, Hrsg.: B. Wielage - Chemnitz (2011) pp. 319-324 - ISBN: 978-3-00-035177-8
- Zybell, L., Enderlein, M., Kuna M.: FEM-Techniken zur Analyse von Rissen im Rahmen der LEBM - DVM-Weiterbildungsseminar "Bruchmechanik und Ermüdungsrisswachstum", Rostock (2011) pp. 89-103
Bücher / Buchbeiträge
- Kuna, M., Ricoeur, A.: Proceedings of the IUTAM Symposium on Multiscale Modelling of Fatigue, Damage and Fracture in Smart Materials held in Freiberg, Germany, September 1-4, 2009 - Series: IUTAM Bookseries, Vol. 24, 1st Edition., Springer Science+Business Media (2011), XXII, 396 p., Hardcover - ISBN: 978-90-481-9886-3
Forschungsberichte
- Gloger, D.: Fehlerbetrachtung Submodellmethode mit Verschiebungsrandbedingung – Submodellmethode mit Verschiebungsrandbedingung - Institutsbericht zum Industrieforschungsprojekt TU Bergakademie Freiberg (2011)
- Hein, J.:, Antragsteller: Kuna M.: Arbeitsbericht zum SPP 1418 FIRE-Projekt KU 929/16-1 Numerische Beanspruchungsanalysen und bruchmechanische Festigkeitskriterien zur Optimierung der Thermoschockbeständigkeit von gradierten und geschichteten Strukturen aus Feuerfestwerkstoffen - Freiberg (09. Dezember 2011)
- Linse, T., Kuna M.: Abschlussbericht/Final Report
Reaktorsicherheitsforschung-Vorhaben-Nr./Reactor Safety Research-project No.: 1501343 - Quantifizierung des spröd-duktilen Versagensverhaltens von Reaktorstählen mit Hilfe des Small-Punch-Tests und mikromechanischer Schädigungsmodelle - IMFD (September 2011)
Fachzeitschriften
- Abendroth, M.: Identification of creep properties for P91 steels at high temperatures using the small punch test. Metallurgical Journal 63 (2010) 39-43
- Bäcker, D. , Ricoeur, A. , Kuna, M.: Ein Sensorkonzept auf der Basis piezoelektrischer PVDF-Folien zu Messung bruchmechanischer Beanspruchungsgrößen - Materials Testing 52 (2010) No. 5, pp. 292-299
- Enderlein, M., Kuna, M.: Untersuchung des Festigkeitsverhaltens beim Schweißen druckbelasteter Gashochdruckleitungen. Zeitschrift der Freunde und Förderer der TU Bergakademie Freiberg, 17 (2010) pp.56-58
- Janski, L., Scherzer, M., Steinhorst, P., Kuna, M.: Adaptive finite element computation of dielectric and mechanical intensity factors in piezoelectrics. International Journal Numerical Methods in Engng., 81 (2010) pp. 1492-1513
- Kuna, M.: Fracture mechanics of piezoelectric materials - Where are we right now? Engineering Fracture Mechanics, 77 (2), (2010) pp. 309-326
- Kuna, M.: Mit Rissen leben – Entwicklung und Anwendung bruchmechanischer Berechnungsmethoden. GAMM Rundbrief 2 (2010) pp. 6-13
- Kuna, M., Abendroth, M., Linse, T., Rasche, S.: Characterization of temperature and irradiation dependent material properties by means of the small punch test and advanced numerical methods. Metallurgical Journal 63 (2010) pp.151-160
- Kuna, M., Wippler, S.: A cyclic viscoplastic and creep damage model for lead free solder alloys. Engineering Fracture Mechanics, 77 (18), (2010) pp. 3635-3647
- Li ,Q., Ricoeur, A., Enderlein, M., Kuna, M.: Evaluation of electromechanical coupling effect by microstructural modeling of domain switching in ferroelectrics. Mechanics Research Communications, 37 (3) (2010) pp. 332-336 - DOI: 10.1016/j.mechrescom.2010.03.003
- Li, Q., Ricoeur, A., Kuna, M.: Coulomb traction on a penny-shaped crack in a three dimensional piezoelectric body. Archive of Applied Mechanics (2010) pp. 1-16
- Mottitschka, T., Pusch, G., Biermann, H., Zybell, L., Kuna, M.: Fatigue crack growth in nodular cast iron - influences of graphite spherical size and variable amplitude loading. Proceedings ICSMA 15, 2009 - Journal of Physics: Conference Series, Volume 240 (2010) Article number 012060 - DOI: 10.1088/1742-6596/240/1/012060
- Mottitschka, T., Pusch, G., Biermann, H., Zybell, L., Kuna, M.: Influence of overloads on the fatigue crack growth in nodular cast iron: Experiments and numerical simulation. Procedia Engineering, 2 (1), (2010) pp. 1557-1567
- Rao, B. N., Kuna, M.: Erratum to "Interaction integrals for fracture analysis of functionally graded piezoelectric materials" International Journal of Solids and Structures 45 (20) (2008) 5237-5257. International Journal of Solids and Structures, 47 (9), (2010) pp. 1325-1326
- Rao, B. N., Kuna, M.: Erratum to:”Interaction integrals for fracture analysis of functionally graded magnetoelectroelastic materials” International Journal of Fracture (2008) 153 (15-37). International Journal of Fracture, 161 (2), (2010) pp. 199-201
- Rao, B. N., Kuna, M.: Interaction integrals for thermal fracture of functionally graded piezoelectric materials. Eng. Fracture Mechanics 77 (2010) pp. 37–50
Tagungsbeiträge
- Abendroth, M.: Bruchmechanische Analyse eines Thermoschockszenarios für WWER-440 Reaktordruckbehälter. In: 42. Tagung Arbeitskreis Bruchvorgänge, DVM-Bericht 242 (2010) pp.133-142
- Bäcker, D., Ricoeur, A., Kuna, M.: Entwicklung eines Sensors auf der Basis piezoelektrischer Polymerfolien zur in-situ Messung von Spannungsintensitätsfaktoren bei Ermüdungsrisswachstum. In: 42. Tagung Arbeitskreis Bruchvorgänge, DVM-Bericht 242 (2010) pp. 93-102
- Janski, L., Kuna, M.: Adaptive finite element modeling of stationary and propagating cracks in piezoelectric structures
Proceedings 37. Solid Mechanics Conference, Warsaw (2010) P0210 - Li ,Q., Kuna, M., Enderlein, M.: Domain switching ahead of the crack emanating from an internal electrode in multilayer ferroeletric actuators. Proc. 18th European Conference on Fracture, Dresden (September 2010) - Session B.09.1-2, paper 419
- Linse, Th., Kuna, M.: Application of a gradient-enriched ductile damage model in the brittle-ductile transition region of ferritic steels. In: Proceedings of the 18th European Conference on Fracture, Dresden (Ed: D. Klingbeil et al.), (2010) Germany
- Mehlhorn L., Prüger S.: Modellierung des Werkstoffverhaltens von TRIP-Stahlguss und Zr02-Keramik, In: Werkstoffe und werkstofftechnische Anwendungen, Band 37, S. 292-300,
TU Chemnitz, Fakultät für Maschinenbau, Institut für Werkstoffwissenschaft und Werkstofftechnik, Eigenverlag, Chemnitz (September 2010) ISBN: 978-3-00-032471-0 - Mottitschka, T., Pusch, G., Biermann, H., Zybell, L., Kuna, M.: Fatigue crack growth in nodular cast iron - influences of graphite spherical size and variable amplitude loading. In: Proceedings ICSMA 15, Journal of Physics: Conference Series 240 (2010) 012060
- Mottitschka, T., Pusch, G., Biermann, H., Zybell, L. , Kuna, M. , Hübner, P.: Ermüdungsrisswachstum in Gusseisen mit Kugelgraphit unter konstanten und variablen Lastamplituden Teil 1: Experimentelle Untersuchungen. In: 42. Tagung Arbeitskreis Bruchvorgänge, DVM-Bericht 242 (2010) pp. 195-205
- Rasche, S., Bermejo, R., Kuna, M., Danzer, R.: Determination of mechanical properties of brittle materials by using the small punch test and the ball on three balls test. In: Proceedings 18th European Conference on Fracture, Dresden (2010)
- Ricoeur, A., Bäcker, D., Kuna, M.: In-situ determination of stress intensity factors for the prediction of fatigue crack growth using piezoelectric polymer coatings. Proceedings of SPIE - The International Society for Optical Engineering, (2010) 7647, art. no. 764724
- Zybell, L., Chaves, H., Kuna, M., Mottitschka T., Pusch, G., Biermann, H.: Ermüdungsrisswachstum in Gusseisen mit Kugelgraphit unter konstanten und variablen Lastamplituden - Teil 2: Numerische Untersuchungen. In: 42. Tagung Arbeitskreis Bruchvorgänge, DVM-Bericht 242 (2010) pp. 207-216
- Zybell, L., Chaves, H., Kuna, M. ,Mottitschka, T., Pusch, G., Biermann, H.: Numerical and experimental investigations of overload effects during fatigue crack growth in nodular cast iron. In: Proceedings 18th European Conference on Fracture, Dresden (2010)
- Zybell, L., Kuna, M., Chaves, H., Mottitschka, T., Pusch, G., Biermann, H.: Ermüdungsrisswachstum in Gusseisen mit Kugelgraphit unter konstanten und variablen Lastamplituden
Teil 2: Numerische Untersuchungen. In: 42. Tagung Arbeitskreis Bruchvorgänge, DVM-Bericht 242 (2010) pp. 207-216
Dissertationen / Habilitationen
- Liedke, Th.: Makro- und Mikromechanische Untersuchungen zum Drahtsägen von Siliziumwafern - Dissertation, 20.12.2010. Berichtsband des IMFD - Heft Nr. 7 (2010)
- Wippler, K.: Entwicklung einer dreidimensionalen Randelementmethode zur Analyse von Rissen in piezoelektrischen Strukturen. Dissertation, TU Bergakademie Freiberg (26.11.2010)
Bücher / Buchbeiträge
- Kuna, M.: Numerische Beanspruchungsanalyse von Rissen - Finite Elemente in der Bruchmechanik 2., verb. Aufl. Vieweg+Teubner Vlg. (2010). XII, 446 S. mit 277 Abb. u. 11 Tab. Br. - ISBN: 978-3-8348-1006-
Forschungsberichte
- Ludwig, C., Kuna, M.: Festkörpermechanische Simulation und Optimierung der Beanspruchung beim CM-Polieren. Institutsbericht zum Industrieforschungsprojekt, TU Bergakademie Freiberg (2010)
Fachzeitschriften
- Bechet, E., Scherzer, M., Kuna, M.: Application of the X-FEM to fracture of piezoelectric materials. Int. J. Numerical Methods Engineering 77 (2009) pp. 1535-1565 - DOI: 10.1002/nme.2455
- Kuna, M.: Bruchmechanische Berechnungsmethoden für die Sicherheit und Lebensdauer von Bauteilen. Zeitschrift für Freunde und Förderer der TU Bergakademie Freiberg 16 (2009) pp. 44–47
- Linse, T., Kuna, M., Schuhknecht, J., Viehrig, H.-W.: Application of the small-punch test to irradiated reactor vessel steels in the brittle-ductile transition region. ASTM Special Technical Publication (2009) pp. 218-235 - DOI: 10.1520/JAI101008
- Mühlich, U., Zybell, L., Kuna, M.: Micromechanical modelling of size effects in failure of porous elastic solids using first order plane strain gradient elasticity. Computational Material Science 46, (2009) pp. 647–653
- Ricoeur, A., Kuna, M.: Electrostatic tractions at dielectric interfaces and their implication for crack boundary conditions. Mechanics Research Communications, 36 (2009) pp. 330-335
- Ricoeur, A., Kuna, M.: Electrostatic tractions at crack faces and their influence on the fracture mechanics of piezoelectrics. International Journal of Fracture157 (2009) pp. 3-12 - DOI: 10.1016/j.mechrescom.2008.09.009
- Springmann, M., Kühhorn, A., Kuna, M., Scherzer, M.: Influence of strain localization on parameter identification. Journal of Engineering Materials and Technology, Transactions of the ASME, 131 (1), (2009) pp. 0110031-0110039
- Wünsche, M., Zhang, C., Kuna, M.: Dynamische Rissanalyse in geschichteten anisotropen Verbundwerkstoffen mit einer Zeitbereichs-Randelementmethode. Materialprüfung/Materials Testing, 51 (3), (2009) pp. 116-125
- Wünsche, M., Zhang, Ch., Kuna, M., Hirose, S., Sladek, J., Sladek, V.: A hypersingular time-domain BEM for 2D dynamic crack analysis in anisotropic solids. International Journal for Numerical Methods in Engineering, 78-2 (2009) pp. 127-150 - DOI: 10.1002/nme.2477
- Wünsche, M., Zhang, Ch., Sladek, J., Sladek, V., Hirose, S., Kuna, M.: Transient dynamic analysis of interface cracks in layered anisotropic solids under impact loading. International Journal of Fracture, 157 (1-2), (2009) pp. 131-147 - DOI: 10.1007/s10704-008-9262-y
- Zybell, L. Mühlich, U., Kuna, M.: Constitutive equations for porous plane-strain gradient elasticity obtained by homogenization. Archive of Applied Mechanics 79 (2009) 359–375 - DOI: 10.1007/s00419-008-0238-1
Tagungsbeiträge
- Bechet, E., Kuna, M.: Some numerical experiments about cracked piezoelectric media. Proceedings of the IUTAM Symposium Multiscale Modelling of Fatigue, Damage and Fracture in Smart Materials Systems. Freiberg, September 1-4, (2009)
- Biermann, H., Aneziris, C. G., Kuna, M.: Collaborativ Researcn Centre TRIP-Matrix-Composite. In: ESOMAT 2009 - The 8th European Symposium on Martensitic - Transformations, 05002 (2009) edited by Sittner P., Heller L. and Paidar V., published by EDP Sciences (www.esomat.org), DOI: 10.1051/esomat/200905002
- Biermann, H., Aneziris, C. G., Kuna, M.: Sonderforschungsbereich TRIP-Matrix-Composite - In: Verbundwerkstoffe, 17. Symposium Verbundwerkstoffe und Werkstoffverbunde (2009), S. 39-45, DGM Deutsche Gesellschaft für Materialkunde e. V., WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim
- Janski, L., Kuna, M.: Crack Propagation Simulations in Piezoelectric Structures with an Efficient Adaptive Finite Element Tool. Proceedings of the 12th International Conference on Fracture, Ottawa, July 12-17, (2009)
- Janski, L., Steinhorst, P., Kuna, M.: Crack propagation simulations in piezoelectric structures with an efficient adaptive finite element tool. Proceedings of the IUTAM Symposium Multiscale Modelling of Fatigue, Damage and Fracture in Smart Materials Systems. Freiberg, September 1-4, (2009)
- Kiyak, Y., Klingbeil, D., Enderlein, M., Kuna, M.: Vergleichende Untersuchungen zum J-Integral Postprozessoren bei statischen und dynamischen Rissbeanspruchungen. In: 41. Tagung Arbeitskreis Bruchvorgänge, DVM-Bericht 241 (2009) 293-303
- Kuna, M., Wippler, S.: A cyclic viscoplastic and creep damage model for lead free solder alloys. Proceedings of the 12th International Conference on Fracture, Ottawa, July 12-17, (2009)
- Kuna, M.: Bruchmechanische Konzepte und Prüfverfahren für piezoelektrische Materialien. In: 41. Tagung Arbeitskreis Bruchvorgänge, DVM-Bericht 241 (2009) 313-328
- Kuna, M., Wippler, K.: Three-dimensional piezoelectric fracture mechanics with boundary elements. 1st African Conference on Computational Mechanics, Sun City, South Africa, AfriComp (2009)
- Leibelt. TH., Enderlein, M., Wippler, S., Völzer, W., Kuna, M.: Anwendung bruchmechanischer Analysewerkzeuge auf Fallversuche von Transportbehältern. In: 41. Tagung Arbeitskreis Bruchvorgänge, DVM-Bericht 241 (2009) 31-43
- Li, Q., Enderlein, M., Kuna, M.: Micromechanical simulation of ferroelectric domain switching at cracks. Proceedings of the IUTAM Symposium Multiscale Modelling of Fatigue, Damage and Fracture in Smart Materials Systems. Freiberg, September 1-4, (2009)
- Liedke, T., Ams, A., Kuna, M.: Experimental and numerical investigation of the wire sawing process. Freiberger Forschungsforum 60. BHT, Freiberger Silicon Days, June 17-19, (2009)
- Ludwig, C., Kuna, M.: FE simulation of the CMP process. Freiberger Forschungsforum 60. BHT, Freiberger Silicon Days, June 17-19, Freiberg, (2009)
- Mottitschka, T., Pusch, G., Biermann, H., Zybell, L., Kuna, M., Hübner, P.: Der Einfluss variabler Lastamplituden auf das Ermüdungsrisswachstum in Gusseisenwerkstoffen mit Kugelgraphit – Experimentelle und numerische Untersuchungen. 9. Tagung – Gefüge und Bruch, Leoben, (2009)
- Mottitschka, M., Hoffmann, M., Pusch, G., Biermann, H., Zybell, L., Kuna, M.: Einfluss variabler Lastamplituden auf das Ermüdungsrisswachstum in Gusseisen mit Kugelgraphit – Experimentelle und numerische Untersuchungen. In: F.J. Schmidt (editor): Anwendungen und Fortschritte in der Bruch- und Schädigungsmechanik (2009) pp. 51–63
- Mühlich, U., Zybell, L., Kuna, M.: Modeling of failure in porous elastic solids using strain gradient theory. Proceeding of the 1st Conference on Material Modelling, Dortmund, Germany (September 2009)
- Mühlich, U., Zybell, L., Kuna, M.: Simulation of size effects in failure of porous elastic solids using strain gradient elasticity in conjunction with a statistical approach. Proceedings of the 12th International Conference on Fracture, Ottawa, July 12-17, (2009)
- Rabold, F., Kuna, M.: FE-Simulation von duktilem Risswachstum,
in: Anwendungen und Fortschritte in der Bruch- und Schädigungsmechanik, Prof. Dr.-Ing. habil. Holger Theilig zum 65. Geburtstag gewidmet. Herausgeber: Fritz J. Schmidt (Dresden 2009) pp. 89-98 - Ricoeur, A., Kuna, M.: Three-dimensional micromechanical modelling of nonlinear ferroelectric constitutive behaviour and application to cracks and electrode interfaces. Proceeding of the 1st Conference on Material Modelling; Dortmund, Germany, September (2009)
- Zybell, L., Kuna, M., Mottitschka, T.,. Hoffmann, M., Pusch, G. und Biermann, H.: Experimentelle und numerische Untersuchungen des Ermüdungsrisswachstums von Gusseisen mit Kugelgraphit. In: 41. Tagung Arbeitskreis Bruchvorgänge, DVM-Bericht 241 (2009) pp. 73–87
Dissertationen / Habilitationen
- Rabold, F.: Simulation der Rissausbreitung mit Hilfe adaptiver Finite-Elemente-Verfahren für elastische und plastische Materialien. Dissertation, TU Bergakademie Freiberg (2009)
- Wippler, S.: Entwicklung eines viskoplastischen schädigungsmechanischen Materialgesetzes für Lotwerkstoffe der Mikroelektronik. Dissertation, TU Bergakademie Freiberg, (05.06.2009) Berichtsband IMFD Heft 5 (2010)
Forschungsberichte
- Biermann, H., Pusch, G., Kuna, M., Mottitschka, T., Zybell, L.: DFG-Zwischenbericht Projekt BI 418/16-1 – KU 929/13-1. TU Bergakademie Freiberg, Institut für Mechanik und Fluiddynamik (2009)
- Zybell, L., Enderlein, M., Kuna, M.: Qualifikation des spröden Gusswerkstoffes EN GJS-700-2U: Abschlussbericht zu Teilprojekt 1 – Statischer Bruchmechaniknachweis. Bericht Industrieprojekt, TU Bergakademie Freiberg, Institut für Mechanik und Fluiddynamik (2009)
Fachzeitschriften
- Bechet, E., Scherzer, M., Kuna, M.: Application of the X-FEM to fracture of piezoeleelectric materials. Int. J. Numerical Methods Engineering, published online (2008) DOI: 10.1002/nme.2455
- Bechet, E., Scherzer, M., Kuna, M.: Fracture of piezoelectric materials with the X-FEM. European J. Computational Methods 17 (2008) 637-649
- Häusler, C., Milde, G., Balke, H., Bahr, H., Gerlach, G.: 3D Modeling of pyroelectric Sensor arrays Part I: Multiphysics Finite-Element Simulation - IEE Sensors Journal, Vol. 8, No. 12, December (2008)
- Janski, L., Scherzer, M., Steinhorst, P., Kuna, M.: Adaptive finite element computation of dielectric and mechanical intensity factors in piezoelectrics. Int. J. Num. Meth. Eng. (2008) Online, DOI: 10.1002/nme.2742
- Linse, T., Kuna, M., Schuhknecht, J., Viehrig, H.-W.: Application of the small-punch-test to irradiated reactor vessel steels in the brittle-ductile transition region. Journal of ASTM International, Vol. 5, No. 4 (published online 18.04.2008)
- Linse, T., Kuna, M., Schuhknecht, J., Viehrig, H.-W.: Usage of the small-punch-test for the characterisation of reactor vessel steels in the brittle-ductile transition region. Engineering Fracture Mechanics 75 (2008) 3520-3533
- Rao, B. N., Kuna, M.: Erratum to Interaction integrals for fracture analysis of functionally graded piezoelectric materials. Int. J. Solids and Structures 45 (2008) 5237-5257
- Rao, B. N., Kuna, M.: Interaction integrals for fracture analysis of functionally graded magnetoelectroelastic materials. Int. J. Fracture 153 (2008) 15–37
- Ricoeur, A., Kuna, M.: The thermoelectromechanical J-integral and the thermal permeability of cracks. Key Engineering Materials 385-387 (2008) 569-572
- Wippler, S., Kuna, M.: Experimental and numerical investigation on the reliability of leadfree solders. Engineering Fracture Mechanics 75 (2008) 3534-3544 - DOI: 10.1016/j.engfracmech.2007.03.046
- Zybell, L., Mühlich, U., Kuna, M.: Constitutive equations for porous plane-strain gradient elasticity obtained by homogenization. Archive of Applied Mechanics (2008) Published online DOI 10.1007/s00419-008-0238-1
Tagungsbeiträge
- Biermann, H., Aneziris, C.G., Kuna, M.: TRIP-Matrix-Composite. DGM-Tagung Verbundwerkstoffe, Bayreuth (2008)
- Janski, L., Kuna, M., Meyer, A., Scherzer, M., Steinhorst, P.: Ein effizientes Finite-Elemente-Werkzeug zur Simulation von Rissausbreitung in piezoelektrischen Strukturen. In: Absicherung der Systemzuverlässigkeit (Hrsg. H. Hanselka). DVM-Bericht 902, 2.Tagung des DVM-Arbeitskreises Zuverlässigkeit mechatronischer und adaptronischer Systeme, Koblenz (2008) 149-158
- Kuna, M.: Fracture mechanics of piezoelectric materials and structures. In: Proceedings 17th European Conference on Fracture, Brno (2008) (Ed.: J. Pokluda et al.), VUTIUM Brno, Czech Republic, CE170126
- Liedke, T., Kern, D., Ams, A., Scherzer, M., Kuna, M.: Mikromechanische Simulation des Drahtsägeprozesses unter Verwendung der Diskreten-Elemente-Methode und Kriterien der Indenterbruchmechanik. In: Bruchmechanik und Bauteilsicherheit, DVM-Bericht 240, 40.Tagung des DVM-Arbeitskreises Bruchvorgänge, Stuttgart (2008), 131-140
- Linse, Th.: Characterization of reactor vessel steels in the brittle-ductile transition region. In: Proceedings 17th European Conference on Fracture, Brno (2008) (Ed.: J. Pokluda et al.), VUTIUM Brno, Czech Republic, CE170216
- Mühlich, U., Zybell, L., Kuna, M.: Simulation of failure in porous elastic solids incorporating size effects. In: Proceedings 17th European Conference on Fracture, Brno (2008) (Ed.: J. Pokluda et al.), VUTIUM Brno, Czech Republic, CE170305
- Rao, B, N., Kuna, M.: Fracture analysis of functionally piezoelectric graded materials - GAMM-Tagung Bremen, April (2008)
- Rasche, S., Kuna, M.: Bestimmung von Verformungs- und Versagenseigenschaften spröd-duktiler Werkstoffe bei tiefen Temperaturen mit dem Small-Punch-Test. In: Bruchmechanik und Bauteilsicherheit, DVM-Bericht 240, 40.Tagung des DVM-Arbeitskreises Bruchvorgänge, Stuttgart (2008) 63-72
- Wippler, S., Kuna, M.: Constitutive Modelling of lead free solders 79th Annual Meeting of the Gesellschaft für Angewandte Mathematik und Mechanik e. V., Bremen, (2008) 31 March - 4 April
- Wünsche, M., Zhang, C., Garcia-Sanchez, Kuna, M.: Eine vergleichende Studie von zwei Zeitbereichs-Randelementmethoden zur dynamischen Rissanalyse in anisotropen Werkstoffen. In: Bruchmechanik und Bauteilsicherheit, DVM-Bericht 240, 40.Tagung des DVM-Arbeitskreises Bruchvorgänge, Stuttgart (2008) 279-288
- Zybell, L., Mühlich, U., Kuna, M.: FE-implementation of plane strain gradient elasticity constitutive equations obtained by homogenization. Proceedings Applied Mathematics Mechanics PAMM (2008)
- Zybell, L., Mühlich, U., Kuna, M.: Implementierung von Gradientenelastizität über die Schnittstelle UEL. 20. Deutschsprachige Abaqus-Benutzerkonferenz, Bad Homburg (2008)
Dissertationen / Habilitationen
- Beyer, Stephanie: Eine Zeitbereichs-Randelementmethode zur transienten Rissanalyse in anisotropen Werkstoffen. Dissertation, TU Bergakademie Freiberg (2008), Berichtsband IMFD Heft 2 (2008)
- Wünsche, Michael: Eine Galerkin-Randelementmethode zur Lösung dynamischer Rissprobleme in anisotropen Werkstoffen. Dissertation, TU Bergakademie Freiberg (2008), Berichtsband IMFD Heft 3 (2008)
Bücher / Buchbeiträge
- Kuna, M.: Numerische Beanspruchungsanalyse von Rissen. FEM in der Bruchmechanik. Vieweg-Teubner Verlag (2008) 446 Seiten, ISBN: 978-3-8351-0097-8
Forschungsberichte
- Janski, L.: Modellierung von Risswachstum in piezoelektrischen Materialien mittels moderner adaptiver FEM-Lösungsstrategien. DFG-Bericht, TU Bergakademie Freiberg (2008)
- Kuna, M., Ricoeur, A., Enderlein, M.: Validation of finite element tools for the calculation of fatigue crack growth rates at the welded 1.5 MW main frames, Parts 1 & 2. Zwischenbericht zum Industrieprojekt (2008)
- Kuna, M., Ricoeur, A., Enderlein, M, Janski, L.: Calculation of critical crack lengths at the mainframe (HP hotspots). Abschlussbericht zum Industrieprojekt (2008)
- Leibelt, T.: Möglichkeiten in ABAQUS zur Umsetzung des LS-Dyna Materialmodells MAT124. Bericht Industrieprojekt (2008)
- Leibelt, T.: Bruchmechanische Bewertung des Transport- und Lagerbehälters CASTOR® HAW29M. Bericht Industrieprojekt (2008)
- Leibelt, T.: Bruchmechanische Bewertung des Transport- und Lagerbehälters CASTOR® vV/19. Bericht Industrieprojekt (2008)
- Ludwig, C., Kuna, M.: Festkörpermechanische Simulation und Optimierung der Beanspruchung beim CM-Polieren. Institutsbericht, TU Bergakademie Freiberg (2008)
- Rasche, S., Kuna, M., Pönitz M., Scherzer, M., Koch, F., Hübner, P., Krüger, L., Pietrzyk, M., Gawad, J.: Untersuchung des Festigkeitsverhaltens beim Schweißen von druckbelasteten Gasdruckleitungenmit den zugehörigen Einflussgrößen für das beanspruchungsgerechte Gestalten von Abzweigen. Abschlussbericht zum Industrieprojekt (2008)
Fachzeitschriften
- Emrich, A., Mühlich, U., Kuna, M., Ludwig, A., Trubitz, P.: Indirect measuring of crack growth by means of a Key-Curve-Method in pre-cracked Charpy specimens consisting of nodular cast iron. Int. Journal of Fracture, 145 (2007) S. 47-61
- Kuna, M.: Finite element analyses of cracks in piezoelectric structures. Key Engineering Materials 348-349 (2007), 629-632
- Liedke, T., Ams, A., Kuna, M.: Investigations on the wire sawing process, Proceedings in Applied Mathematics and Mechanics. PAMM Proceedings Applied Mathematics Mechanics (2007)
- Wünsche, M., Beyer, S., Zhang Ch., Kuna, M.: 2D dynamische Rissanalyse in anisotropen Werkstoffen mit einer hypersingulären Zeitbereichs-Randelementmethode. Materialprüfung 49 (2007) pp. 2-9
- Wünsche, M., Beyer, S., Zhang Ch., Kuna, M.: 2D dynamische Rissanalyse in anisotropen Werkstoffen mit einer hypersingulären Zeitbereichs-Randelementmethode. Materialprüfung/Materials Testing Vol. 10 (2007) pp. 534-541
- Westram, I., Ricoeur,A., Emrich, A., Rödel, J., Kuna, M.: Fatigue crack growth law for ferroelectrics under cyclic electrical and combined electromechanical loading. Journal of the European Ceramics Society 27 (2007) 2485-2494
Tagungsbeiträge
- Bechet, E., Scherzer, M., Kuna, M.: Application de la méthode des éléments finis étendus à la simulation de la rupture pourles matériaux piezoélectriques. Etude de différents enrichissements et convergence. 8e colloque national en calcul des structures, le 24 janvier (2007) Giens, France
- Enderlein, M., Kuna, M., Ricoeur, A.: A Micromechanical Material Model for Ferroelectrics and its Application to Crack Problems. Proceedings of the First Seminar on The Mechanics of Multifunctional Materials, Bad Honnef May 2007, J. Schröder, D. Lupascu, D. Balzani (Eds.) Report No. 5, Institute of Mechanics, Faculty for Engineering Sciences, Division Civil Engineering, University of Duisburg-Essen, (2007) 21-25
- Janski, L., Kuna, M., Meyer, A, Scherzer, M., Steinhorst, P.: Modellierung von Risswachstum in piezoelektrischen Materialien mittels moderner adaptiver FEM-Lösungsstrategien. Proceedings of the First Seminar on The Mechanics of Multifunctional Materials, Bad Honnef May (2007), J. Schröder, D. Lupascu, D. Balzani (Eds.) Report No. 5, Institute of Mechanics, Faculty for Engineering Sciences, Division Civil Engineering, University of Duisburg-Essen (2007) 52-55.
- Janski, L., Kuna, M., Meyer, A., Scherzer, M., Steinhorst, P.:
Modellierung von Risswachstum in piezoelektrischen Materialien mittels moderner adaptiver FEM-Lösungsstrategien. In: Bruchmechanik und Bauteilsicherheit (Hrsg. M. Kuna), DVM-Bericht 239, 39.Tagung des DVM-Arbeitskreises Bruchvorgänge, Dresden, (2007) 297-306 - Kuna, M.: Finite-Element-Analyse von Rissproblemen bei linear-elastischem Materialverhalten. DVM-Weiterbildungsseminar „Anwendung numerischer Methoden in der Bruchmechanik, Dresden (2007) Bericht 1, 1-28
- Linse, T. ; Kuna, M. ; Schuhknecht, J. ; Viehrig, H.-W.: Application of the small-punch-test to irradiated reactor vessel steels in the brittle-ductile transition region. ASTM E10 Fifth Symposium on Small Specimen Test Techniques, Costa Mesa, CA, USA (2007)
- Linse, T. ; Kuna, M. ; Schuhknecht, J. ; Viehrig, H.-W.: Charakterisierung von Reaktorstählen im spröd-duktilen Übergangsbereich mit dem Small-Punch-Test. 33. MPA-Seminar (2007), S. 3.1-18
- Mühlich, U.: Computerpräsentation der Arbeitsschritte einer FEM-Rissanalyse. DVM-Weiterbildungsseminar „Anwendung numerischer Methoden in der Bruchmechanik, Dresden (2007) Bericht 1, 135-144
- Wünsche, M., Zhang C., Kuna, M.: Dynamische Rissanalyse in anisotropen Verbundwerkstoffen mit einer Zeitbereichs-Randelementmethode. In: Bruchmechanik und Bauteilsicherheit (Hrsg. M. Kuna). DVM-Bericht 239, 39.Tagung des DVM-Arbeitskreises Bruchvorgänge, Dresden (2007) 297-306
- Wippler, K., Kuna, M.: Numerische und analytische dreidimensionale Fundamentallösungen für Piezoelektrika zur Anwendung in der BEM. Proceedings of the First Seminar on The Mechanics of Multifunctional Materials, Bad Honnef, May 2007,
J. Schröder, D. Lupascu, D. Balzani (Eds.) Report No. 5, Institute of Mechanics, Faculty for Engineering Sciences. Division Civil Engineering, University of Duisburg-Essen (2007) pp. 52-55
Bücher / Buchbeiträge
- Kuna, M.: Bruchmechanik und Bauteilsicherheit. DVM-Bericht 239, 39.Tagung des DVM-Arbeitskreises Bruchvorgänge, Dresden (2007)
Dissertationen / Habilitationen
- Enderlein, M.: Finite-Elemente-Verfahren zur bruchmechanischen Analyse von Rissen in piezoelektrischen Strukturen bei transienter elektromechanischer Belastung. Dissertation, TU Bergakademie Freiberg (2007), Berichtsband IMFD Heft 1 (2007)
- Ricoeur, A.: Theoretische Untersuchungen zum Bruchverhalten ferroelektrischer Keramiken bei elektromechanischer Beanspruchung. Habilitationsschrift, TU Bergakademie Freiberg (2007), Freiberger Forschungsheft B340 (2007)
Forschungsberichte
- Kuna, M., Ricoeur, A., Wippler, K.: Bruchmechanische Berechnung kritischer Risslängen im geschweißten Grundrahmen einer 1,5 MW Windkraftanlage. Abschlussbericht zum Industrieprojekt (2007)
Fachzeitschriften
- Abendroth, M., Kuna, M.: Identification of ductile damage and fracture parameters from the small punch test using neural networks.
Engineering Fracture Mechanics 73 (2006) 710-725
DOI: 10.1016/j.engfracmech.2005.10.007 - Hofmann, M., Bahr, H., A., Linse, T., Bahr, H., Balke, H., Weiss, H. J.: Self-driven tunneling crack arrays - a 3D-fracture mechnics bifurcation analysis.
International Journal Fracture (2006) 141 pp. 345-356 - Kuna, M.: Finite element analyses of cracks in piezoelectric structures - a survey.
Archive of Applied Mechanics 76 (2006) 725-745 - DOI: 10.1007/s00419-006-0059-z - Kullig, E., Wippler, S.: Numerical integration and FEM-implementation of a viscoplastic Chaboche-model with static recovery.
Computational Mechanics 38 (2006) 491-503 - Meyer, A., Rabold, F., Scherzer, M.: Efficient finite element simulation of crack propagation using adaptive iterative solvers.
Communications in Numerical Methods in Engineering 22 (2006) 93-108 - Rasche, S., Kuna, M.: Bestimmung von Verformungs- und Festigkeitseigenschaften mit dem Small-Punch-Test: Identifikation von Fließkurven und Materialkennwerten des Sprödbruchs bei tiefen Temperaturen.
VDI Berichte 1948 (2006) 113-122 - Springmann, M., Kuna, M.: Determination of ductile damage parameters by local deformation fields. Measurement and Simulation.
Archive of Applied Mechanics 75 (2006) 775-797 - Wippler, K., Kuna, M.: Crack analyses in three-dimensional piezoelectric structures by the BEM.
Computational Material Science 39 (2006) 261-266
Tagungsbeiträge
- Bechet, E., Scherzer, M., Kuna, M.: Application of the X-FEM to fracture of piezoeleelectric materials.
Proceedings 7th World Congress on Computational Mechanics, Los Angeles, USA (2006) CD ROM - Emrich, A., Mühlich, U., Kuna, M.: Anwendung der Key-Curve-Methode zur Bestimmung von dynamischen Risswiderstandskurven.
In: Fortschritte in der Bruch- und Schädigungsmechanik (Ed.: M. Kuna), DVM-Bericht 238, 38.Tagung des DVM-Arbeitskreises Bruchvorgänge, Aachen (2006) - Emrich, A., Mühlich, U., Ludwig, A., Trubitz, P., Kuna, M.: Modified Key Curve-Method for determination of dynamic crack resistance curves.
Proceedings 16th European Conference of Fracture, Alexandropoulis, Greece July (2006) E.E. Gdoutos (Ed.), Springer Vlg. Dorthrecht 2006, 409 ff - Kuna, M.: FEM-techniques for thermo-electro-mechanical crack analyses in smart structures.
IUTAM Symposium (Mechanics and Reliabilitiy of actuating materials; Ed. W. Yang) Beijing, September 2004, Springer (2006) Solid Mechanics and ist Apllication, Volume 127 (2006) pp. 131-143
DOI: 10.1007/1-4020-4131-4_14 - Kuna, M.: Weisbachs Arbeiten zur Technischen Mechanik in Bezug zur heutigen Zeit.
In: Julius L. Weisbach (1806-1871), Gedenkschrift zu seinem 200. Geburtstag, Freiberger Forschungsforum, 57. Berg-und Hüttenmännischer Tag 2006, Freiberger Forschungshefte D 222, Freiberg (2006) 103-123 - Kuna, M., Springmann, M.: Determination of ductile damage parameters by local deformation Fields,
Proceedings 16thEuropean Conference of Fracture, Alexandropoulis, Greece July 2006 E.E. Gdoutos (Ed.). Springer Vlg. Dorthrecht (2006) pp. 409 ff und CD ROM - Linse, T., Kuna, M., Schuhknecht, J.: Usage of small-punch-test for the characterisation of reactor vessel steels in the brittle-ductile transition region.
In: Besson, J., Moinerau, D., Steglich, D. (Hrsg.): EUROMECH – MECAMAT 2006 – 9th European Mechanics of Materials Conference: Local Approach to Fracture (2006) 303-308 - Linse, T., Kuna, M., Schuhknecht, J.: Usage of small-punch-test for the characterisation of reactor vessel steels in the brittle-ductile transition region.
In: Besson, J., Moinerau, D., Steglich, D. (Hrsg.): EUROMECH – MECAMAT 2006 – 9th European Mechanics of Materials Conference: Local Approach to Fracture (2006) 303-308 - Rasche, S., Kuna, M.: Determination of working and strength properties with the Small-Punch-Test. Identification of flow curves and material characteristics of brittle failure at low temperatures [Bestimmung von Verformungs- und Festigkeitseigenschaften mit dem Small-Punch-Test Identifikation von Fließkurven und Materialkennwerten des Sprödbruchs bei tiefen Temperaturen]
VDI Berichte Vol. 1948 (2006) pp. 113-122 - Ricoeur, A. Emrich, A., Kuna, M.: Untersuchungen zum Ermüdungsrisswachstum in ferroelektrischen Keramiken.
In: 1. Tagung DVM-AK Zuverlässigkeit mechatronischer und adaptronischer Systeme (Ed.:T. Hanselka), DVM-Bericht 901 (2006) 63-72 - Ricoeur, A., Enderlein, M., Kuna, M.: Fatigue crack growth in ferroelectrics under cyclic electrical loading.
Proceedings of SPIE The International Society for Optical Engineering 6170, art. no. 61700C, San Diego (2006) - Scherzer, M.: About the Development of Strength Criteria of Interface-Corner(Crack)-Configurations including piezoelectrics.
Direct and inverse problems in piezoelectricity Hirschegg (2006) - Scherzer, M.: Theoretische Grundlagen zur Festigkeitsbewertung von Grenzflächenrissen.
In: Fortschritte in der Bruch- und Schädigungsmechanik (Ed.: M. Kuna), DVM-Bericht 238, 38.Tagung des DVM-Arbeitskreises Bruchvorgänge, Aachen (2006) 41-59 - Scherzer, M.: Über die Entwicklung von Festigkeitshypothesen für piezoelektrische Interface-Ecken-Konfigurationen.
In: 1. Tagung des DVM-Arbeitskreises Zuverlässigkeit mechatronischer und adaptronischer Systeme, Deutscher Verband für Materialforschung und -prüfung e.V.( 2006) 179-188 - Springmann, M., Kuna, M.: Determination of ductile damage parameters by local deformation fields.
Proceedings 16th European Conference of Fracture, Alexandropoulis, Greece July (2006) E.E. Gdoutos (Ed.), Springer Vlg. Dorthrecht 2006, 535 ff und CD ROM - Springmann, M., Scherzer, M., Kuna, M., Kühhorn, A.: Numerical simulation of localization phenomena in the frame of damage parameter identification.
NAFEMS Seminar: ”Materials Modeling - FE Simulations of the Behavior of Modern Industrial Materials Including their Failure”, December (2006) Wiesbaden, 1-12 - Wünsche, M., Beyer, S., Zhang, Ch., Kuna, M.: Dynamische Rissberechnung in anisotropen Werkstoffen mit der hypersingulären Zeitbereichs- Randelementmethode.
In: Fortschritte in der Bruch- und Schädigungsmechanik (Ed.: M. Kuna), DVM-Bericht 238, 38.Tagung des DVM-Arbeitskreises Bruchvorgänge, Aachen (2006)
Bücher / Buchbeiträge
- Kuna, M.: Fortschritte in der Bruch- und Schädigungsmechanik.
DVM-Bericht 238, 38. Tagung des DVM-Arbeitskreises Bruchvorgänge, Aachen (2006) - Kuna, M., Pohl, N.: Julius L. Weisbach (1806-1871), Gedenkschrift zu seinem 200. Geburtstag,
Freiberger Forschungsforum. 57. Berg-und Hüttenmännischer Tag 2006, Freiberger Forschungshefte D 222,
ISBN 3-86012-278-9, Freiberg (2006)
Fachzeitschriften
- Abendroth, M.: Identifikation elastoplastischer und schädigungsmechanischer Materialparameter aus dem Small Punch Test.
Dissertation TU Bergakademie Freiberg, Institut für Mechanik und Fluidmechanik, Dezember 2004. Freiberger Forschungsheft B329 (2005) - Chaves, H., Ludwig, Chr.: Characterization of cavitation in transparent nozzles depending on the nozzle geometry.
Proc. ILASS 2005, Orleans (2005) pp. 259-264 - Enderlein M., Ricoeur, A., Kuna, M.: FEM-Techniken zur dynamischen Rissanalyse in piezoelektrischen Strukturen.
37. DVM-Tagung AK Bruchvorgänge, Hamburg (2005) pp. 167-176 - Enderlein, M., Ricoeur, A., Kuna, M.: Finite element techniques for dynamic crack analysis in piezoelectrics.
International Journal of Fracture 134 (2005) pp. 191–208 - DOI: 10.1007/s10704-005-0522-9 - Enderlein, M., Völzer, W., Ricoeur, A., Kuna, M.: Computational dynamic fracture analysis for drop tests of shipping casks.
Proc. 11. Int. Conference on Fracture, (Ed.: A: Carpinteri), Turin (2005) CD-ROM 442 - Groh, U., Kuna, M.: Efficient boundary element analysis of cracks in 2D piezoelectric structures
International Journal of Solids and Structures 42, 8 (2005) pp. 2399-241 - DOI: 10.1016/j.ijsolstr.2004.09.023 - Kuna, M.: A review of finite element techniques to analyse 3D piezoelectric crack problems.
Proc. 11. Int. Conference on Fracture (Ed.: A: Carpinteri), Turin (2005) CD-ROM 4095 - Kuna, M.: Technische Sicherheit, Zuverlässigkeit und Lebensdauer.
DVM-Bericht 237, 37.Tagung des DVM-Arbeitskreises Bruchvorgänge, Hamburg (2005) - Kuna, M., Abendroth M.: Prüfung duktiler Werkstoffe mit dem Small Punch Test - Bestimmung und Übertragung schädigungsmechanischer Parameter.
Materialprüfung 47 (2005) 45-54 - Kuna, M ., Enderlein, M., Ricoeur, A.: Finite element analysis of cracks in piezoelectrics under dynamic electromechanical loading.
The International Conference on Computational & Experimental Engineering Sciences - Advances in Computational & Experimental Engineering and Sciences (Chennai, India 2005 , Ed.: S. M. Sivakumar et. al) - Tech Science Press (2005) pp. 449-454 - Kuna, M., Springmann, M., Mädler, K., Hübner, P., Pusch, G.: Fracture mechanics based design of a railway wheel made of austempered ductile iron.
Engineering Fracture Mechanics 72 (2005) pp. 241-253 - Rabold, F., Kuna, M.: Cell model Simulation of void growth in nodular cast iron under cyclic loading
Computational Materials Science 32 (2005) pp. 489-497
DOI: 10.1016/j.commatsci.2004.09.016 - Mühlich, U. , Donoso, J. R., Landes, J. D.: A J-integral estimation method for C(T) specimens using the Common Format Equation.
International Journal of Fracture 133 (2005) pp. 371 - 388 - Rabold, F., Kuna, M.: Simulation of void growth in nodular cast iron under cyclic loading.
Computational Materials Science 32 (2005) pp. 489-497 - Ricoeur, A., Enderlein, M., Kuna, M.: Calculation of the J-integral for limited permeable cracks in piezoelectrics.
Archive of Applied Mechanics 74 (2005) pp. 536 - 549 - Springmann, M.: Identifikation von Materialparametern schädigungsmechanischer Gesetze unter Einbeziehung der Dehnungslokalisierung.
Dissertation TU Bergakademie Freiberg, Institut für Mechanik und Fluidmechanik, Mai 2005 Mensch & Buch Vlg. (2005) - Springmann, M., Kuna, M.: Erratum: Identification of material parameters of the Gurson-Tvergaard- Needleman model by combined experimental and numerical techniques
in Computational Materials Science (2005) 32 pp. 544-552
Computational Materials Science 33-4 (2005) p. 500
DOI: 10.1016/j.commatsci.2005.02.003 - Springmann, M., Kuna, M.: Identification of material parameters of the Gurson-Tvergaard-Needleman model by combined experimental-numerical technique
Computational Materials Science 32 (2005) pp. 544-552
DOI: 10.1016/j.commatsci.2004.09.010 - Springmann, M., Kuna, M.: Identification of material parameters of the Gurson-Tvergaard-Needleman model by combined experimental and numerical techniques.
Computational Materials Science 4 (2005) pp. 501-509
DOI: 10.1016/j.commatsci.2005.02.002 - Wippler S., Kullig E., Fredersdorf K., Miranda R., Kuna, M.: Experimentelle und numerische Untersuchungen zum Versagen bleifreier Lotwerkstoffe.
37. DVM-Tagung AK Bruchvorgänge, Hamburg (2005) pp. 301-310
Fachzeitschriften
- Abendroth, M., Kuna, M.: Determination of ductile materials properties by means of the small-punch test and neural networks.
Advanced Engineering Materials 6 (2004) 536-540 - Enderlein, M., Ricoeur A., M. Kuna, M., R. Hüggenberg , W. Völzer: Bruchmechanische Beanspruchungsanalyse eines CASTOR-Behälters bei Fallversuchen.
36. DVM-Tagung AK Bruchvorgänge, Köln-Porz (2004) pp. 251-260 - Enderlein, M.: FEM-analysis of cracks in piezoelectric structures under dynamic electromechanical loading.
In: Proc. 15th European Conference of Fracture (CD ROM, Ed.: F. Nilsson), Stockholm (2004) - Funke, C., Kullig, E., Kuna, M., Möller, H.J.: Biaxial fracture test of silicon wafers.
Advanced Engineering Materials 6 (2004) 594-598 - Groh, U., Kuna, M.: Efficient Boundary Element Analysis of cracks in 2D Piezoelectric structures.
International Journal of Solids and Structures 42, Vol. 8 (2004) pp. 2399-2416 - Kreißig, R.; Meyer, A.; Kuna, M.: Effiziente parallele Algorithmen zur Simulation des Deformationsverhaltens von Bauteilen aus elastisch-plastischen Materialien.
TU Chemnitz, Sonderforschungsbereich 393: Numerische Simulation auf massiv parallelen Rechnern, SFB-Bericht (2002-2004) Teilprojekt D1, 221-258 - Kuna, M.: Fortschritte in der Bruch- und Schädigungsmechanik.
DVM-Bericht 236, 36. Tagung des DVM-Arbeitskreises Bruchvorgänge, Köln-Porz (2004) - Kuna, M.: Grundlagen der Schädigungsmechanik.
DVM-Weiterbildungsseminar: Grundlagen und Anwendung der Schädigungsmechanik, Köln (2004) Bericht 1, pp. 1-64 - Kuna, M., Abendroth, M.: Identification and validation of ductile damage parameters by the small punch test.
In: Proc. 15th European Conference of Fracture (CD ROM, Ed.: F. Nilsson), Stockholm (2004) - Kuna, M., Groh, U.: Entwicklung von Randelementmethoden zur elektromechnischen Festigkeitsanalyse von piezoelektrischen Strukturen mit Defekten
DFG-Forschungsbericht, TU Bergakademie Freiberg (2004) - Kuna, M., Groh U.: Virtual crack closure integral in BEM-analysis of piezoelectric crack problems.
Computational Mechanics, WCCM VI in conjunction with APCOM'04, Sept.5-10 (2004) Beijing, China, Tsinghua University Press & Springer Verlag.
CD-ROM Article M-443, Editors: Z. H. Yao, M. W. Yuan, W. X. Zhong - Meyer, A., Rabold, F., Scherzer, M.: Efficient Finite Element Simulation of Crack Propagation.
Sonderforschungsbereich 393: Numerische Simulation auf massiv parallelen Rechnern, Preprint (2004/01) - Mühlich, U., Brocks, W.: Regularization behaviour of a nonlocal Gurson-type model.
In: Proc. 15th European Conference of Fracture (CD ROM, Ed.: F. Nilsson), Stockholm (2004) - Mühlich, U., Donso, J., Landes, J.: Comparative study of different methods to estimate crack resistance curves from fracture tests using numerical crack growth simulation techniques.
In: Proc. 15th European Conference of Fracture (CD ROM, Ed.: F. Nilsson), Stockholm (2004) - Rabold, F., Meyer, A., Scherzer, M., Kuna, M.: Finite-Element-Simulation von Risswachstum mittels effizienter adaptiv-iterativer Solver.
36. DVM-Tagung AK Bruchvorgänge, Köln-Porz (2004) pp. 171-182 - Radeke, C., Stoyan, D., Kuna, M.: Kraftflussprobleme in Kugelpackungen und Brucheigenschaften spröder Partikel.
Abschlussbericht Sonderforschungsbereich 285 (Ed.: K. Husemann, K. Graichen), Freiberg (2004) Shaker Verlag, 99-128 - Ricoeur, A.: Theory and applications of weight functions for cracks in piezoelectrics.
In: Proc. 15th European Conference of Fracture (CD ROM, Ed.: F. Nilsson), Stockholm (2004) - Scherzer, M., Kuna, M.: Combined analytical and numerical solution of 2D interface corner configurations between dissimilar piezoelectric materials.
Int. J. Fracture 127 (2004) pp. 61-99 - Shang, F., Kitamura, T., Kuna, M.: An elliptical crack in a thermopiezoelectric solid under uniform temperature gradient: Analytical development.
Key Engineering Materials Vol. I (2004) pp. 63-68 - Springmann, M., Kuna, M.: Identification of material parameters of inelastic constitutive law from displacement fields.
Damage and Fracture Mechanics VIII (Ed.: C.A. Brebbia, A.Varvani-Farahani) WIT Press, Southampton-Boston (2004) pp. 13-23 - Wippler, K., Ricoeur, A., Kuna, M.: Towards the computation of electrically semi-permeable cracks in piezoelectrics.
Engineering Fracture Mechanics 71 (2004) pp. 2567-2587
Fachzeitschriften
- Abendroth, M., Kuna, M.: Bestimmung von Verformungs- und Versagenseigenschaften duktiler Werkstoffe aus dem Small-Punch-Test.
Tagungsband 35. DVM-Tagung AK Bruchvorgänge (Freiburg 2003) pp. 269-278 - Abendroth, M., Kuna, M.: Determination of deformation and failure properties of ductile materials by means of the small-punch test and neural networks.
Computational Materials Science 28/3-4 (2003) 633-644 - Enderlein, M., Klein, K., Kuna, M., Ricoeur, A.: Numerical fracture analysis for the structural design of CASTOR casks.
17. Int. Conf. Structural Mechanics in Reactor Technology SMIRT, Prague (2003) Prag, G042 - Enderlein, M., Kuna, M., Ricoeur, A., Baer, W., Müller, K., Klein, K., Winkler, H.P.: Numerische Analyse des Stoßbiegeversuchs zur Ermittlung der dynamischen Bruchzähigkeit.
Tagungsband 35. DVM-Tagung AK Bruchvorgänge (Freiburg 2003) pp. 259-268 - Enderlein, M., Ricoeur A., Kuna, M.: Comparison of finite element techniques for 2D and 3D crack analysis under impact loading.
Int. J. Solids & Structures 40 (2003) pp. 3425-3437 - Groh, U., Kuna, M.: 2D Piezoelectric Crack Analysis by Boundary Element Method.
Proc. Conf. Fracture and Damage, Paderborn, 2003 - Key Engineering Materials 251-252 (2003) pp. 91-96 - Groh, U., Kuna, M.: Randelementmethoden zur elektromechanischen Festigkeitsanalyse piezoelektrischer Strukturen.
PAMM Proc. Appl. Math. Mech. 2 (2003) pp. 208-209 - Jackewiecz, J., Kuna, M.: Non-Local regularization for FE simulation of Damage in ductile materials.
Computational Materials Science 28 (2003) pp. 684-695 - Kuna, M., Wulf, H., Rusakov, A., Pusch, G., Hübner, P.: Entwicklung und Verifikation eines bruchmechanischen Bewertungssystems für Hochdruck-Ferngasleitungen.
Tagungsband 35. DVM-Tagung AK Bruchvorgänge, Freiburg (2003) pp. 153-162 - McMeeking, B., Ricoeur, A.: The Weight Function for Cracks in Piezoelectrics.
International Journal of Solids and Structures 40 (2003) pp. 6143-6162 - Ricoeur, A., Kuna, M.: A micromechanical model for the fracture process zone in ferroelectrics.
Computational Materials Science 27 (2003) pp. 235-249 - Ricoeur, A., Kuna, M.: Influence of electric fields on the fracture of ferroelectric ceramic.
Journal of the European Ceramic Society 23 (2003) pp. 1313-1328 - Ricoeur, A., Kuna, M.: Influence of the fracture process zone in ferroelectrics on the effective fracture toughness.
Proceedings of SPIE - The International Society for Optical Engineering (2003) pp. 395-404 - Shang, F., Kuna, M.: Thermal stress around a penny shaped crack in a thermopiezoelectric solid.
Computational Materials Science 26 (2003) pp. 197-201 - Shang, F., Kuna, M., Abendroth, M.: Finite element analyses of three-dimensional crack problems in piezoelectric structures.
Engineering Fracture Mechanics 70 (2003) pp. 143-160 - Shang, F., Kuna, M., Kitamura, T.: Theoretical investigations of an elliptical crack in thermopiezoelectric material.
Part I: Analytical development - Theoretical and Applied Fracture Mechanics 40 (2003) 237-246 - Shang, F., Kuna, M., Scherzer, M.: Development of finite element techniques for three-dimensional analyses of crack problems in thermopiezoelectric materials.
ASME Trans. J. Eng. Materials & Technology 125 (2003) 18-21 - Shang, F., Kitamura, T., Kuna, M.: Theoretical investigations of an elliptical crack in thermopiezoelectric material.
Part II: Crack propagation, - Theoretical and Applied Fracture Mechanics 40 (2003) 247-253 - Shang, F., Kitamura, T., Kuna, M.: An elliptical crack in thermo-piezoelectric solids under uniform temperature gradient: analytical development.
Key Engineering Materials, Volume 261-263, Advances in Fracture and Failure Prevention: 63-68 (2003) - Springmann, M., Kuna, M.: Identification of material parameters of Rousselier model by non-linear optimization.
Computational Materials Science 26 (2003) 202-209
Fachzeitschriften
- Abendroth, M., Groh, U., Kuna, M., Ricoeur, A.: Finite element computation of the electromechanical J-Integral for 2D and 3D crack analysis.
International Journal of Fracture 114 (2002) 359-378 - Kullig, E.: Computerpräsentation der Arbeitsschritte einer FEM-Rissanalyse.
DVM-Weiterbildungsseminar: Anwendung numerischer Methoden in der Bruchmechanik, Freiberg (2002) Bericht 1, pp. 93-122 - Kuna, M.: Einführung in die Finite-Element-Techniken zur Analyse von Rissproblemen bei linear-elastischem Materialverhalten.
DVM-Weiterbildungsseminar: Anwendung numerischer Methoden in der Bruchmechanik, Freiberg (2002) Bericht 1, pp. 1-43 - Kuna, M., Springmann, M., Mädler, K., Hübner, P., Pusch, G.: Anwendung bruchmechanischer Bewertungskonzepte bei der Entwicklung von Eisenbahnrädern aus bainitischem Gusseisen.
Konstruieren & Gießen (2002) - Kuna, M., Springmann, M., Mädler, K., Hübner, P., Pusch, G.: Anwendung bruchmechanischer Konzepte bei der Auslegung von ADI-Eisenbahnrädern.
Tagungsband 34. DVM-Tagung AK Bruchvorgänge, Freiberg (2002) pp. 139-150 - Kuna, M., Wulf, H., Rusakov A., Hübner, P., Pusch, G., Hoffmann, U.: Ein computergestütztes bruchmechanisches Bewertungssystem für Hochdruck- Ferngasleitungen.
Tagungsband 28. MPA-Seminar, Stuttgart (2002) pp.4/1- 4/20 - Radeke, Ch., Gäser, H., Stoyan, D.: Force distribution analysis in loaded planar disc systems by means of FEM.
Granular Matter 4 (2002) pp. 71-76 - Radeke, Ch., Kuna, M., Stoyan, D.: Mechanical and statistical analysis of loaded sphere packings by means of FEM.
In: Numerical modeling in micromechanics via particle methods (Ed. : H. Konietzky) - Proc. 1st PFC-Symposium, Gelsenkirchen (2002) Balkema Publ., pp. 13-18 - Ricoeur, A., Kuna, M.: Theoretical investigation of fracture behaviour in ferroelectric ceramics.
7th International Symposium on Fracture Mechanics of Ceramics, Moskau, 1999.
In: Fracture Mechanics of Ceramics (Ed.: R.C: Bradt et al) Kluwer, New York (2002) pp. 63-82 - Scherzer, M., Gläser, H.: Mechanical modelling of failure patterns in TiN-coatings loaded by homogenous stresses of a bending specimen.
Int. J. Fracture 114 (2002) pp. 291-306 - Shang, F., Kuna, M., Abendroth, M.: Finite element analyses of three-dimensional crack problems in piezoelectric structures.
Engineering Fracture Mechanics 70 (2003) pp. 143-160 - Shang, F., Kuna, M., Scherzer M.: A finite element procedure for three-dimensional analyses of thermopiezoelectric structures in static application.
Technische Mechanik 22 (2002) pp. 235-243 - Shang, F., Kuna, M., Scherzer, M.: Analytical solutions for two penny-shaped crack problems in thermopiezoelectric materials and their finite element comparison.
Int. J. Fracture, 117 (2002) pp. 113-128 - Springmann, M., Kuna, M.: Identifikation schädigungsmechanischer Materialparameter mit Hilfe nichtlinearer Optimierungsverfahren am Beispiel des Rousselier-Modells.
Sonderforschungsbereich 393: Numerische Simulation auf massiv parallelen Rechnern, Preprint (2002) 08
Fachzeitschriften
- Jackewiecz, J., Kuna, M., Scherzer, M.: Non-local approach for Damage Simulation in Ductile Materials.
Proc. 14th Nordic Seminar on Computational Mechanics (Eds.: L Beldie, et al.), Lund, Sweden, (October 2001) pp. 200-203 - Kuna, M., Ricoeur, A.: Simulation of domain switch-toughening in ferroelectric ceramics.
In Proceedings of the 10th International Conference on Fracture ICF10 (CD ROM), ed. K. Ravi-Chandar et al., Pergamon Press, Honululu (2001) - Kuna, M., Scherzer, M.: Bruchmechanische Beanspruchungsanalyse von Rissen in adaptiven piezoelektrischen Verbundwerkstoffen.
Bericht 33.Tagung DVM AK Bruchvorgänge, Paderborn, (20.-21. Febr 2001) S. 57-66 - Michael, D.: Kontinuumstheoretische Grundlagen und algorithmische Behandlung von ausgewählten Problemen der assoziierten Fließtheorie.
Sonderforschungsbereich 393: Numerische Simulation auf massiv parallelen Rechnern (Preprint 2001/06) - Michael, D., Meisel, M.: Some remarks to large deformation elasto-plasticity (continuum formualtion)
Preprint-Reihe des Chemnitzer SFB 393 (2001) - Michael, D., Springmann, M.: Zur numerischen Simulation des Versagens duktiler metallischer Werkstoffe (Algorithmische Behandlung und Vergleichsrechungen).
Sonderforschungsbereich 393: Numerische Simulation auf massiv parallelen Rechnern
Preprint-Reihe des Chemnitzer SFB 393 (2001) 09 - Scherzer, M., Kuna, M.: Coupling of Asymptotic Solutions with Finite Elements at Interface Configurations in Piezoelectric Composites.
In Proceedings of the 10th International Conference on Fracture ICF10 (CD ROM), ed. K. Ravi-Chandar et al.,Pergamon Press, Honululu (2001) - Shang, F., Kuna, M., Scherzer, M.: Development of finite element techniques for three-dimensional analyses of crack problems thermopiezoelectric materials.
Proc. EUROMECH COLLOQUIUM 429: Computational and Experimental Mechanics of Advanced Materials, (Ed.: H. Böhm) Wien, September (2001) - Wulf, H., Brecht, K., Hoffmann, Kuna, M.: Computergestützte bruchmechanisches Bewertungssystem für die Bruchsicherheit von Hochdruck-Ferngasleitungens.
Tagungsband 16. Rohrleitungstechnische Tagung SDBR, Gelsenkirchen (März 2001) pp. 1-9 - Zheng, M., Zhou, G., Zacharopoulos, D., Kuna, M.: Crack initiation behavior in StE690 steel characterized by strain energy density criterion.
Theoretical and Applied Fracture Mechanics 36 (2001) pp. 141-145
Fachzeitschriften
- Görke, U.-J., Bucher, A. , Kreißig R. & Michael D.: Ein Beitrag zur Lösung von Anfangs-Randwert-Problemen einschließlich der Materialmodellierung bei finiten elastisch-plastischen Verzerrungen mit Hilfe der FEM.
TU Chemnitz , Preprint SFB 393/00-09 (2000) - Görke, U.-J., Bucher, A. , Kreißig R. & Michael D.: Implicit integration of deformation laws for large elasto-plastic deformations.
In: Proceedings of the IV. IASS-IACM Colloquium, Chania-Kreta (2000) - Kuna, M.: Numerical analysis of fracture in smart composite structures.
Proc. Fracture and Damage Mechanics VI, (ed.:A. P. S. Selvadurai, C.A. Brebbia) Montreal (2000) Computational Mechanics Publications Southhampton, S. 23-33 - Kuna, M., Ricoeur, A.: Theoretical investigations on the cracking of ferroelectric ceramics.
In Proceedings of SPIE’s 7th International Symposium on Smart Structures and Materials, ed. C.S. Lynch, Vol. 3992, New Port Beach, Cal., (2000) pp.185-96. - Kuna, M., Scherzer, M., Ricoeu, A.: Finite element techniques for flaw analysis in piezoelectric micro-components.
In Proceedings of the 3rd International Micro Materials Conference, ed. B. Michel et al., Berlin (2000) pp. 488-95. - Lauschke, U., Kuna, M.: Bestimmung von Verformungs- und Versagenseigenschaften duktiler Werkstoffe aus dem Small-Punch-Test.
Bericht der 32.Tagung DVM AK Bruchvorgänge, Berlin (22.-23. Febr 2000) S. 367-376 - Scherzer, M., Kuna, M.: Numerical analyses of cracks in piezoelectric composite structures under electromechanical loading,
Proceedings of the 13th European Conference on Fracture. 6th – 9th September (2000) San Sebastian, Spain, CD – Scherzer/Kuna 1–8. - Zheng, M., Lauschke, U., Kuna, M.: A damage mechanics based approach for fracture of metallic components.
Computational Materials Science, 19 (2000) 170-178 - Zheng, M., Lauschke, U., Kuna, M.: Non-local Ductility Dissipation Based Approach for Predicting Crack Initiation.
GAMM-Tagung, Göttingen, 2000 (Vortrag)
Fachzeitschriften
- Kuna, M.: An energy balance integral for cracks in heterogenoeus structures under electromechanical loading.
In: Materials Mechanics, Fracture Mechanics, Micro Mechanics, (Ed.:T. Winkler, A. Schubert), Berlin/Chemnitz S. 441-448 (1999) - Michael, D.: Notizen zu einer geometrisch motivierten Plastizitätstheorie.
Preprint-Reihe des Sonderforschungsbereichs 393 „Numerische Simulation auf massiv parallelen Rechnern“.
TU Chemnitz (1999) SFB393/99-05 - Michael, D.: On a geometric theory of large deformation elasto-plasticity.
In: Materials Mechanics, Fracture Mechanics, Micro Mechanics, (Ed.:T. Winkler, A. Schubert),
Berlin/Chemnitz S. 530-534 (1999) - Ricoeur, A., Kuna, M., Förderreuther, A., Thurn, G.: Konzeption und Interpretation elektromechanischer DCB- und CT-Versuche an Funktionskeramiken.
31. Tagung DVM Arbeitskreis Bruchvorgänge, Darmstadt (1999) S. 339-348 - Ricoeur, A., Kuna, M.: Theoretical investigation of fracture behaviour in ferroelectric ceramics.
7th International Symposium on Fracture Mechanics of Ceramics, 20-22 July, Moskau 1999
In: Fracture Mechanics of Ceramics (Ed.: R.C: Bradt et al) Kluwer, New York (2002) pp. 63-82 - Scherzer, M.: Stress fields at interface-corners for non-linear deformations.
In: Materials Mechanics, Fracture Mechanics, Micro Mechanics (Ed.:T. Winkler, A. Schubert),
Berlin/Chemnitz S. 485-495 (1999) - Scherzer, M., Kuna, M.: Asymptotic analysis of Interface Problems in piezoelectric composite materials.
Proc. 1st Caesarium “Smart Materials”, Bonn (1999) In: Smart Materials (Ed.: K.H. Hoffmann), Springer Vlg. (2001) S. 137-148
Dissertationen / Habilitationen
- Scherzer, M. (Habilitation): Physikalisch und geometrisch nichtlineare Problemstellungen der Festkörper- und Bruchmechanik an Interface-Konfigurationen.
Habilitationsschrift, TU Bergakademie Freiberg, Fakultät Maschinenbau, Verfahrens- und Energietechnik (April 1999)
Fachzeitschriften
- Dudek, R., Scherzer, M., Schubert, A., Michel, B.: FE-Simulation for Polymeric Packaging Materials IEE Transaction on Components,
Packaging and Manufacturing Technology, Part A, Vol. 21, No. 2, June (1998) - Kuna, M.: An Energy Balance Integral for Cracks in Heterogeneous Structures Under Electromechanical Loading.
In: Materials Mechanics – Fracture Mechanics – Micromechanics, FhIZM Berlin (1998) - Kuna, M.: Finite element analyses of crack problems in piezoelectric structures.
Computational Material Science 13 (1998) 67-80 - Kuna, M.: Risse in piezoelektrischen Strukturen unter mixed-mode elektromechanischen Beanspruchungen.
Berichte 30.Tagung DVM Arbeitskreis Bruchvorgänge, Dresden, Februar (1998) 353-362 - Kuna, M., Roos, E.: Cell model analyses of the void behaviour under plastic cyclic loading.
Proc. Fracture and Damage Mechanics V, 1998, (ed.: C.A. Brebbia, A. Carpintieri), Bologna (1998) - Computational Mechanics Publications Southhampton, pp. 585-594 - Kuna, M., Roos, E.: The behaviour of micro-voids under cyclic plastic deformation – a theoretical study (Vortrag)
8th Int. Workshop Computational Mechanics of Materials, MPA Stuttgart, 8.-9. Oct. (1998) - Kuna, M., Scherzer, M., Abendroth, M.: Finite element modelling of adaptive composites with integrated piezoelectric fibres.
Proc. NAFEMS – Seminar “FEM-applications for adaptive structural systems, Magdeburg, pp. 8-14 (1998)
Fachzeitschriften
- Kuna, M.: FEM-Techniken zur Analyse von Rissen unter elektrischen und mechanischen Beanspruchungen.
Berichte 29. Tagung DVM Arbeitskreis Bruchvorgänge, Stuttgart (Februar 1997) S. 369-379 - Kuna, M.: Numerical Analysis of electromechanically loaded defects in smart ceramic materials.
Proceedings 2. Conference Smart Mechanical Systems, Magdeburg (März 1997) 21-32 - Kuna, M., Sun, D. Q.: Three-dimensional cell model analyses of void growth in ductile materials.
Int. J. Fracture 81 (1996) 235-258