M. Akhlaghi, R. Hock, J. Dallmann, A. Krapf, B. Merle, H. Hofsäss, C. Körner, A. Leineweber:
Gaseous nitriding of Co-10 at% and -15 at% Cr alloys at 400 °C and 450 °C,
Journal of Alloys and Compounds 907 (2022) 164535.
M. Barasinski, J. Hilbig, S. Neumann, D. Rafaja, G. Garnweitner:
Simple model of the electrophoretic migration of spherical and rod-shaped Au nanoparticles in gels with varied mesh sizes,
Colloids and Surfaces A: Physicochemical and Engineering Aspects 651 (2022) 129716.
H. Becker, N. Bulut, J. Kortus, A. Leineweber:
β-Al4.5FeSi: Hierarchical crystal and defect structure: Reconciling experimental and theoretical evidence including the influence of Al vs. Si ordering on the crystal structure,
Journal of Alloys and Compounds 911 (2022) 165015.
H. Becker, B. Fankhänel, C. Voigt, A. Charitos, M. Stelter, C.G. Aneziris, A. Leineweber:
Interaction of Fe‐Containing, Secondary Al–Si Alloy with Oxide and Carbon‐Containing Ceramics for Fe Removal,
Advanced Engineering Materials 24 (2022) 2100595.
H. Becker, R. Hielscher, A. Leineweber:
Interplay between Habit Plane and Orientation Relationship in an Electron Backscatter Diffraction Analysis: Using the Example of η′-Al8Fe3 in η-Al5Fe2,
Crystals 12 (2022) 813.
D. Chebykin, T. Dubberstein, H.-P. Heller, O. Fabrichnaya, O. Volkova:
Investigation of wetting behavior of Cr–Mn–Ni steels on hBN-SiC-ZrO2-substrate,
Ceramics International 48 (2022) 3771-3778.
G. Chen, R. Rahimi, M. Harwarth, M. Motylenko, G. Xu, H. Biermann, J. Mola:
Non-cube-on-cube orientation relationship between M23C6 and austenite in an austenitic stainless steel,
Scripta Materialia 213 (2022) 114597.
J. Freudenberger, F. Thiel, D. Utt, K. Albe, A. Kauffmann, S. Seils, M. Heilmaier:
Solid solution strengthening in medium- to high-entropy alloys,
Materials Science and Engineering: A 861 (2022) 144271.
U. Gebhardt, T. Gustmann, L. Giebeler, F. Hirsch, J.K. Hufenbach, M. Kästner:
Additively manufactured AlSi10Mg lattices – Potential and limits of modelling as-designed structures,
Materials & Design 220 (2022) 110796.
M. Gude, P. Klimant, M. Putz, D. Rafaja, D. Weck, C. Wüstefeld:
AMARETO – Saxon Alliance for MAterial‐ and Resource‐Efficient TechnOlogies,
Engineering Reports 4 (2022) .
L. Haus, M. Wildfeuer, J.-E. Grochowski, J. Wöckel, M. Müller, F. Köhn, W. Schulz, C. Wüstefeld, D. Rafaja, J. Albrecht:
Wear properties of carbon-rich tungsten carbide films,
Wear 488-489 (2022) 204146.
Q. Huang, C. Ullrich, J. Mola, M. Motylenko, L. Krüger, O. Volkova, A. Weiß, M. Wendler:
Quenching and partitioning (Q&P) processing of a (C+N)-containing austenitic stainless steel,
Materials Science and Engineering: A 854 (2022) 143787.
M. Ilatovskaia, O. Fabrichnaya:
Liquid Immiscibility and Thermodynamic Assessment of the Al2O3–TiO2–SiO2 System,
Journal of Phase Equilibria and Diffusion 43 (2022) 15-31.
Y. Ivanisenko, A. Mazilkin, I. Gallino, S.S. Riegler, S. Doyle, A. Kilmametov, O. Fabrichnaya, M. Heilmaier:
On the formation of nanocrystalline aluminides during high pressure torsion of Al/Ni alternating foils and post-processing multilayer reaction,
Journal of Alloys and Compounds 905 (2022) 164201.
S. Kante, M. Motylenko, A. Leineweber:
Nitriding of White‐Solidified Fe–C–Si Alloys: Diffusion Path Concept Applied to Inhomogeneous Microstructures,
Advanced Engineering Materials 24 (2022) 2100833.
F. Kochta, U. Kühn, S. Henschel, L. Giebeler, T. Gemming, K. Neufeld, C. Leyens, L. Krüger, J. Hufenbach:
Novel Fe-0.3Cr-0.4Mo-1.5Mn–3Ni-0.6C tool steel with superior properties under quasi-static and dynamic loading,
Materials Science and Engineering: A 829 (2022) 142156.
M.J. Kriegel, M.H. Wetzel, O. Fabrichnaya, D. Rafaja:
Binary Ti–Fe system. Part II: Modelling of pressure-dependent phase stabilities,
Calphad 76 (2022) 102383.
P. Krooß, C. Lauhoff, T. Gustmann, T. Gemming, C. Sobrero, F. Ewald, F. Brenne, T. Arold, M. Nematolahi, M. Elahinia, J. Thielsch, J. Hufenbach, T. Niendorf:
Additive Manufacturing of Binary Ni–Ti Shape Memory Alloys Using Electron Beam Powder Bed Fusion: Functional Reversibility Through Minor Alloy Modification and Carbide Formation,
Shape Memory and Superelasticity 8 (2022) 452-462.
U. Kühn, J. Sander, K.N. Gabrysiak, L. Giebeler, K. Kosiba, S. Pilz, K. Neufeld, A.V. Boehm, J.K. Hufenbach:
Approach to Estimate the Phase Formation and the Mechanical Properties of Alloys Processed by Laser Powder Bed Fusion via Casting,
Materials (Basel, Switzerland) 15 (2022) .
J. Lachmann, M.J. Kriegel, A. Leineweber, S.-L. Shang, Z.-K. Liu:
Thermodynamic re-modelling of the Cu–Nb–Sn system: Integrating the nausite phase,
Calphad 77 (2022) 102409.
Le Feng, J. Freudenberger, K. Nielsch, T.G. Woodcock:
Elimination of the non-recrystallised regions in the extruded MnAl-C-Ni magnet using pulverised melt-spun ribbons,
Journal of Alloys and Compounds 897 (2022) 163248.
D. Lehninger, F. Honeit, D. Rafaja, V. Klemm, C. Röder, L. Khomenkova, F. Schneider, J. von Borany, J. Heitmann:
Size- and position-controlled Ge nanocrystals separated by high-k dielectrics,
MRS Bulletin 47 (2022) 773-782.
A. Leineweber, M. Fischer, S. Kante, S. Martin:
Effect of Cu on Nitriding of α-Fe,
Metals 12 (2022) 619.
K. Lu, A. Chauhan, D. Litvinov, A.S. Tirunilai, J. Freudenberger, A. Kauffmann, M. Heilmaier, J. Aktaa:
Micro-mechanical deformation behavior of CoCrFeMnNi high-entropy alloy,
Journal of Materials Science & Technology 100 (2022) 237-245.
S. Martin, D. Sulik, X.F. Fang, H. Becker, A. Leineweber:
Steel–Aluminum Hybrid Die Casting: Microstructures related to the applied Al–Si bond coating,
Intermetallics 151 (2022) 107712.
S. Martin, A. Weidner, C. Ullrich, C. Schimpf, M. Motylenko, R. Lehnert, H. Biermann, D. Rafaja, A. Vinogradov, Y. Estrin:
Deformation behaviour of TWIP steels: Constitutive modelling informed by local and integral experimental methods used in concert,
Materials Characterization 184 (2022) 111667.
S. Martin, A. Winkelmann, A. Leineweber:
Domain structure of pseudosymmetric η″-ordered Cu6Sn5 by EBSD analysis,
Acta Materialia 229 (2022) 117828.
B. Paul, A. Hofmann, S. Weinert, F. Frank, U. Wolff, M. Krautz, J. Edelmann, M.W. Gee, C. Reeps, J. Hufenbach:
Effect of Blasting Treatments on the Surface Topography and Cell Adhesion on Biodegradable FeMn‐Based Stents Processed by Laser Powder Bed Fusion,
Advanced Engineering Materials 24 (2022) .
B. Paul, A. Lode, A.-M. Placht, A. Voß, S. Pilz, U. Wolff, S. Oswald, A. Gebert, M. Gelinsky, J. Hufenbach:
Cell-Material Interactions in Direct Contact Culture of Endothelial Cells on Biodegradable Iron-Based Stents Fabricated by Laser Powder Bed Fusion and Impact of Ion Release,
ACS applied materials & interfaces 14 (2022) 439-451.
A. Pukenas, P. Chekhonin, J. Scharnweber, R. Chulist, C.-G. Oertel, J. Freudenberger, W. Skrotzki:
TiAl-based semi-finished material produced by reaction annealing of Ti/Al layered composite sheets,
Materials Today Communications 30 (2022) 103083.
A. Salomon, M. Motylenko, D. Rafaja:
Formation of Interface Layers between Corundum‐Based Refractory Ceramics with Carbon Additions and Molten 42CrMo4 Steel,
Advanced Engineering Materials 24 (2022) 2100690.
R. Schaarschuch, C.-G. Oertel, A. Pukenas, S. Zhou, G. Cao, J. Freudenberger, W. Gan, E. Maawad, R. Chulist, W. Skrotzki:
Low temperature deformation mechanisms of polycrystalline CoZr and Co39Ni11Zr50 B2-type intermetallic compounds,
Acta Materialia 223 (2022) 117489.
D. Schliephake, C. Lopes, Y.M. Eggeler, H. Chen, J. Freudenberger, D. Bayoumy, A.J. Huang, A. Kauffmann:
Improved work hardening capability and ductility of an additively manufactured and deformed Al-Mn-Mg-Sc-Zr alloy,
Journal of Alloys and Compounds 924 (2022) 166499.
J.P. Schoß, H. Becker, A. Keßler, A. Leineweber, G. Wolf:
Removal of Iron from a Secondary Al–Si Die‐Casting Alloy by Metal Melt Filtration in a Laboratory Filtration Apparatus,
Advanced Engineering Materials 24 (2022) 2100695.
A. Schramm, R. Nowak, G. Bruzda, W. Polkowski, O. Fabrichnaya, C.G. Aneziris:
High temperature wettability and corrosion of ZrO2, Al2O3, Al2O3-C, MgO and MgAlON ceramic substrates by an AZ91 magnesium alloy melt,
Journal of the European Ceramic Society 42 (2022) 3023-3035.
A. Schramm, M. Thümmler, O. Fabrichnaya, S. Brehm, J. Kraus, J. Kortus, D. Rafaja, C. Scharf, C.G. Aneziris:
Reaction Sintering of MgAlON at 1500 °C from Al2O3, MgO and AlN and Its Wettability by AlSi7Mg,
Crystals 12 (2022) 654.
M. Seleznev, T. Gustmann, J.M. Friebel, U.A. Peuker, U. Kühn, J.K. Hufenbach, H. Biermann, A. Weidner:
In situ detection of cracks during laser powder bed fusion using acoustic emission monitoring,
Additive Manufacturing Letters 3 (2022) 100099.
A.S. Tirunilai, K.-P. Weiss, J. Freudenberger, M. Heilmaier, A. Kauffmann:
Revealing the Role of Cross Slip for Serrated Plastic Deformation in Concentrated Solid Solutions at Cryogenic Temperatures,
Metals 12 (2022) 514.
A. Walnsch, T. Kaaden, P.D.B. Fischer, M. Motylenko, M. Seyring, A. Leineweber, S. Lippmann:
Formation of a nanoscale two-phase microstructure in Cu–Zn(Al) samples with macroscopic concentration gradient,
Materials Characterization 192 (2022) 112229.
Z. Wang, X. Lin, L. Wang, H. Yang, Y. Zhou, J.K. Hufenbach, K. Kosiba, T. Zhang, W. Huang:
Novel high-strength Al-Cu-Cd alloy fabricated by arc-directed energy deposition: Precipitation behavior of the Cd phase and grain evolution,
Additive Manufacturing 60 (2022) 103278.
X. Wei, S. Dudczig, E. Storti, M. Ilatovskaia, R. Endo, C.G. Aneziris, O. Volkova:
Interaction of molten Armco iron with various ceramic substrates at 1600 °C,
Journal of the European Ceramic Society 42 (2022) 2535-2544.
X. Wei, E. Storti, S. Dudczig, A. Yehorov, O. Fabrichnaya, C.G. Aneziris, O. Volkova:
The interaction of carbon-bonded ceramics with Armco iron,
Journal of the European Ceramic Society 42 (2022) 4676-4685.
X. Wei, A. Yehorov, E. Storti, S. Dudczig, O. Fabrichnaya, C.G. Aneziris, O. Volkova:
Phenomenon of Whiskers Formation in Al2O3 −C Refractories,
Advanced Engineering Materials 24 (2022) 2100718.
J. Zeisig, L. Giebeler, A. Gebert, S. Oswald, U. Kühn, J. Hufenbach:
Novel Corrosion‐Resistant Tool Steels with Superior Wear Properties,
Advanced Engineering Materials 24 (2022) .