Direkt zum Inhalt

2023

  • Felkl, L.; Stelter, M.; Charitos, A.: Comparative study on the reduction of copper refining slag by metallic reducing agents. Proceedings of the European Metallurgical Conference (EMC2023) (2023), Düsseldorf, Germany
  • Schmidt, A.; Montenegro, V.; Charitos, A.; Reuter, M.; Stelter, M.; Richter, A.: CFD Simulation of SO3 formation in an industrial-scale copper smelting waste heat boiler. Proceedings of the European Metallurgical Conference (EMC2023) (2023), Düsseldorf, Germany
  • Voigt, C.; Gumban, C.G.; Hubalkova, J.; Fankhänel, B.; Charitos, A.; Aneziris, C.G.: Interactions between copper melt and industrial filter materials. Proceedings of the European Metallurgical Conference (EMC2023) (2023), Düsseldorf, Germany
  • Carneiro, G.; Charitos, A.; Bier, T.; Waida, S.: Valorisation of waste to energy plant fly ash to a valuable resource material. Proceedings of the European Metallurgical Conference (EMC2023) (2023), Düsseldorf, Germany
  • Blenau, L.W.; Lonski, O.; Abrar, A.; Vogt, D.; Fabrichnaya, O.; Stelter, M.; Charitos, A.: Pyrometallurgical Recycling of NdFeB Permanent Magnets though Slag Design. Proceedings of the European Metallurgical Conference (EMC2023) (2023), Düsseldorf, Germany
  • Thiere, A.; Bombach, H.; Stelter, M.: The oxidation behavior of ruthenium in copper electrowinning Process. Proceedings of the European Metallurgical Conference (EMC2023) (2023), Düsseldorf, Germany
  • Otgonbayar, U.; Sandig-Predzymirska, L., Thiere, A.: Charitos, A.: Process development for the separation of Pt, Ru and Ir by solvent extraction. Proceedings of the European Metallurgical Conference (EMC2023) (2023), Düsseldorf, Germany
  • Felkl, L.; Schwedler, O., Charitos, A.: Influence of the enrichment of natural gas with hydrogen on the hydrogen solubility of different copper phases and the heat balance. Proceedings of the METAL 2023 conference (2023), Brno, Czech Republic.

2022

  • Hopf J., Weigelt A., Bombach H., Charitos A., Stelter M.: Investigations on the Leaching of Raw Silver Granules with Methanesulfonic Acid (MSA). World of Metallurgy - ERZMETALL 75(2) (2022), GDMB Verlag GmbH Clausthal-Zellerfeld, ISSN: 1613-2394, p. 94-99.
  • Meiner K., Weigelt A., Charitos A., Stelter M., Wrobel M., Hammerschmidt J.: Alkaline sulfide leaching and partial roasting for treatment of As-rich concentrates. World of Metallurgy - ERZMETALL 75(2) (2022), GDMB Verlag GmbH Clausthal-Zellerfeld, ISSN: 1613-2394, p. 100-108.
  • Blenau L., Wexler M., Mahl J., Baumann W., Stapf D., Charitos A.: Utilization of Carbon Fibers (CF) as an Alternative Reduction Agent for Slag Valorisation Processes. Extended Abstract, präsentiert auf der Conference of Metallurgists (Montreal, Kanada), 21-24.08.2022.
  • Blenau L., Charitos. A: Verwendung von Karbonfasern (KF) als alternatives Reduktionsmittel in der Schlackeverwertung. ACAMONTA : Zeitschrift für Freunde und Förderer der TU Bergakademie Freiberg 29 (2022), S. 33.
  • Felkl L., Stelter M., Charitos A.:  Modelling and experimental investigation concerning the reduction of a “black copper smelter” anode furnace slag and the production of a copper-rich alloy. Veröffentlichung der 59. Conference of Metallurgists Hosting the International Copper Conference 2022 (Santiago de Chile, Chile), Pyrometallurgy Volume, S. 773.
  • Blenau L., Sander S., Fuhrmann S., Charitos A.:Valorisation of copper slag: Zero-Waste Production of Pig Iron and Glass Fibers. Veröffentlichung der 59. Conference of Metallurgists Hosting the International Copper Conference 2022 (Santiago de Chile, Chile), Pyrometallurgy Volume, S. 797.
  • Schmidt A., Montenegro V., Charitos A., Reuter M., Stelter M., Richter A:  CFD model on dust sulphatisation and accretion formation in an industrial-scale copper flash smelting furnace waste heat boiler. Veröffentlichung der 59. Conference of Metallurgists Hosting the International Copper Conference 2022 (Santiago de Chile, Chile), Pyrometallurgy Volume, S. 63.
  • Meiner K., Khulan B., Weigelt A., Thiere A., Vogt D., Stelter M., Kassahun A., Meima J. Charitos A.: Investigations on the selective arsenic reduction from copper concentrates by alkaline sulfide leaching and arsenic precipitation. Veröffentlichung der 59. Conference of Metallurgists Hosting the International Copper Conference 2022 (Santiago de Chile, Chile), Hydrometallurgy Volume, S. 336.
  • Scharf, C., Schramm, A., Thümmler, M., Fabrichnaya, O., Brehm, S., Kraus, J., Kortus, J., Rafaja, D., Aneziris, C.G.: Fundamental investigation of the technological research on the reaction sintering of MgAlON at 1500°C from Al2O3, MgO and AlN, Keynote (invited), 2nd International Virtual Conference on Materials Science & Engineering, Delight Scientific Conferences, UK, September 23-24, 2022

2021

2020

2019

  • Taube M. C., Adam C., Adamczyk B.,  Beckmann T., Reuter M. A., Stelter M.: Influence of C-feeding on a pyrometallurgical Ta and Nb recycling process and the formation of carbides, Proceedings of EMC, Düsseldorf (2019), Vol. 1, p. 371-386
  • Weigelt A., Stelter M.: A new approach of Gallium recycling from etching solutions  in GaAs production by dialysis, Proceedings of EMC, Düsseldorf (2019), Vol. 1, p. 387-403
  • Kandalam A., Kleeberg J., Stelter M., Reuter M. A.: Investigating the temperature profile in a pilot top submerged lance furnace at TU Bergakademie Freiberg, Proceedings of EMC, Düsseldorf (2019), Vol. 2, p. 605-621
  • Obiso D., Stelter M., Reuter M. A., Kriebitzsch S.: CFD modelling of the combustion and heat transfer in the Top-Submerged-Lance smelter, Proceedings of EMC, Düsseldorf (2019), Vol. 2, p. 631-638
  • van Schalkwyk R. F., Stelter M., Rezende J., to Baben M.,  Reuter M. A.: Dynamic model of a TSL furnace, developed with SimuSageTM software, Proceedings of EMC, Düsseldorf (2019), Vol. 2, p. 697-710
  • Matthies A., Stelter M., Nühlen J.: Use of a vanadium electrolyte based on secondary raw materials in Redox-Flow-Battery storage systems, Proceedings of EMC, Düsseldorf (2019), Vol. 2, p. 903-912
  • Vogt D., Stelter M.: Recovery of critical metals from WEEE by molten salt pyrolysis, Proceedings of EMC, Düsseldorf (2019), Vol. 3, p. 1121-1135
  • Kandalam A., Kleeberg J., Stelter M., Reuter M. A.: Investigating the combustion conditions of TSL lance in an ambient atmosphere, Proceedings of the 58th Conference of Metallurgists Hosting the International Copper Conference 2019 (Vancouver, Canada), Article number 561070

2018

  • Fankhänel B., Voigt C., Stelter M., Aneziris C.G.: Interaction of AlSi7Mg with oxidic filter materials, Proceedings of 73rd World Foundry Congress – WFC 2018, 23.-27.09.2018, Krakau, Polen, p. 55-56

2017

  • Heinze V., Stelter M.: The Influence of Temperature, Electrolyte Composition and Additive Concentrations on Physical Properties of Copper Electrolytes, Proceedings EMC, Leipzig, 3 (2017), p. 1053-1063
  • Dressler A., Keil M., Müller T., Stelter M.: The Possible Use of Methanesulfonic Acid as a New Electrolyte for Silver Electro-Refining, Proceedings of EMC, Leipzig, 1 (2017), p. 43-54
  • Rädecker,P., Scharf,C., Zürner,P., Frisch,G., Pieplow,G., Lindner,D., Koch,J.: Flue dust from the copper converter process – Recovery of Cu and In by solvent extraction, EMC, 27.06.2017, Leipzig, Deutschland, pp. 1121 – 1132, ISBN 978-3-940276-74-2.

2016

  • Poklad A., Galindo V., Schmid E., Pätzold O., Stelter M., Gerbeth G.: „Crystallization of multi-crystalline silicon in a cone-shaped, inductively heated crucible: MHD melt flow and seeded growth”, Proc. 10th  PAMIR Int. Conf. Fundamental and Appl. MHD, Cagliari (2016), p. 336-340
  • Bönisch P., Dadzis K., Meier D., Thieme N., Büttner L., Pätzold O., Sylla L.: „Modelling of turbulent melt flow for directional solidification“, Proc. 10th PAMIR Int. Conf. Fundamental and Appl. MHD, Cagliari (2016), p. 131-135
  • Thieme N., Meier D., Bönisch P., Dadzis K., Nauber R., Büttner L., Pätzold O., Czarske J.: „Ultrasonic measurements of 3D turbulent melt flows in crystal growth“, Proc. 10th PAMIR Int. Conf. on Fundamental and Appl. MHD, Cagliari (2016), p. 160-164
  • Meier D., Thieme N., Bönisch P., Dadzis K., Büttner L., Pätzold O., Czarske J., Stelter M.: „Setup for MHD model experiments with directional solidification of gallium“, Proc. 10th PAMIR Int. Conf. on Fundamental and Appl. MHD, Cagliari (2016), p. 397-401

2015

  • Voigt C., Fankhänel B., Aneziris C. G., Stelter M.: “Influence of the filter surface chemistry on the filter filtration of aluminum”, 14th Biennale Worldwide Congress; The Unified International Technical Conference on Refractories UNITECR, Documedias GmbH, Hannover, (2015), p. 188
  • Bombach H., Stelter M., Baumbach J., Thiere A.: “A new electrolyte for copper electrorefining”, Proceedings EMC, 1 (2015), p. 209-218
  • Baumbach J., Bombach H.; Stelter M.: „Investigations of the behaviour of thiourea and alternative additives in copper electrorefining”, Proceedings EMC, 1 (2015), p. 151-160
  • Schmid E., Funke C., Behm T., Würzner S., Pätzold O., Stelter M., H.J. Möller H. J.: ”Growth and characterization of multi-crystalline silicon ingots”, Functional structure design of new high-performance materials via atomic design and defect engineering (ADDE), ed. D. Rafaja, SVD Direct World Dresden, (2015), p. 26-41
  • Lukin G., Pätzold O., Stelter M., Barchuk M., Rafaja D., Röder C., Kortus J.: “Defect engineering in GaN layers grown by HVPE”, Functional structure design of new high-performance materials via atomic design and defect engineering (ADDE), ed. D. Rafaja, SVD Direct World Dresden, (2015), p. 78-99
  • Dadzis K., Lukin G., Meier D., Bönisch P., Sylla L., Pätzold O.: ”Crystallization of gallium in a traveling magnetic field as a model experiment”, Proc. 8th Intern. Conf. on Electromagnetic Processing of Materials (EPM), St Martin d'Heres, France, (2015), p. 121-124
  • Thieme N., Nauber R., Beyer H., Bönisch P., Dadzis K., Meier D., Pätzold O., Sylla L., Büttner L., Czarske J.: ”Ultrasound flow mapping for the investigation of crystal growth”, IEEE Proc. Int. Ultrasonics Symp. (IUS), Taipeh, Taiwan, (2015), No. 7329168
  • Ohmann,S., Ditze,A., Scharf,C.: Recycling of magnesium chips. Proceedings EMC 2015, Vol. 1, ISBN 978-3-940276-61-2, pp. 429-442.

2013

  • Duwe,S., Scharf,C., Ditze,A.: Removal of nickel impurities from recycled Mg-Al alloys by precipitation of intermetallic compounds, Proceedings EMC 2013, Vol. 2, ISBN 978-3-940276-50-6, pp. 597-604
  • Zschiesche C., Schmidl J., Morgenstern G.: „A Crucible Setup for Investigations of the Copper Converting Stage in the Peirce-Smith Converter“, Proceedings of EMC, 1 (2013), p. 203
  • Klaffenbach E., Zervos J., Morgenstern G.: „Characterization of Iron Silicate under Variation of Cooling Conditions and Chemical Composition“, Proceedings of EMC, 1 (2013), p. 385

2009

  • Niemietz K., Ehrig J., Lantzsch R., Pätzold O., Stelter M.: “Vertical gradient freeeze growth with a travelling magnetic field under optimized thermal conditions“, Proc. 6th Intern. Conf. on Electromagnetic Processing of Materials (EPM), Dresden, (2009), p. 845-848
  • Pätzold O., Lantzsch R., Greif A., Galindo V., Grants I., Gerbeth G., Stelter M.: ”Melt flow stabilisation in bulk crystal growth by means of external magnetic fields”, Proc. 6th Intern. Conf. on Electromagnetic Processing of Materials (EPM), Dresden, (2009), p.859-862

2008

  • Pätzold O., Lantzsch R., Grants I., Stelter M., Gerbeth G.: „VGF growth in a combined magnetic AC/DC field“, Proc. 7th Intern. PAMIR Conf. on Fundamental and Applied MHD, (2008) p. 633-635

2007

  • Niederschlag E., Pleßow K., Stelter M., Günther N., Carluß V.: „Recycling of spent catalysts“, Proceedings EMC, Düsseldorf, 2 (2007), p. 731-740.
  • Stelter M.: „Scrap – an Excellent Raw Material“, Proceedings EMC, Düsseldorf, 4 (2007), p. 1663-1674
  • Morgenstern G., Stelter, M., Putzschke, M., Wrobel, M.: „Study of the crude copper converting“, Proceedings EMC, Düsseldorf, 1 (2007), p. 125-134
  • Lantzsch R., Galindo V., Grants I., Pätzold O., Gerbeth G., Stelter M.: „VGF-Kristallzüchtung mit externen Magnetfeldern“, Proc. KRISTMAG-Statusseminar, Berlin, (2007), p. 42

2006

  • Stelter M., Bombach H., Saltykov P.: Corrosion Behavior of Lead Alloy Anodes in Metall Winning, Proceedings of the International Symposium, San Diego, (2006), p. 451-462
  • Stelter M., Bombach H.: „Korrosionsschutz für Magnesiumlegierungen“, Tagungsband Meform, (2006), p. 344-352

2005

  • Niederschlag E., Stelter M.: „Membrane technology in the metal industry“, Proceedings EMC Congress, Dresden, 2  (2005), p. 621-631
  • Lantzsch R., Grants I., Galindo V., Pätzold O., Gerbeth G., Stelter M., Cröll A.: “Fluid Flow Analysis and Vertical Gradient Freeze Crystal Growth in a Travelling Magnetic Field”, Proc. 15th Riga and 6th PAMIR conf. on fundamental and applied MHD, Riga, (2005), p. 197-200
  • Morgenstern G., Stelter M.: „Investigation of possibilities for cleaning of aluminium bronze fort the recycling of cast alloys“, Proceedings of EMC, 4 (2005), p. 1684

2004

  • Scheller P., Stelter M.: “Network between Metallurgy of Steel and Zinc”, Tagungsband “Metal Separations Technologies”, III Copper Mountain, Colorado, (2004), p. 69-75
  • Bombach H., Stelter M.: „Elektrolytkupfer – Qualität kontra Effizienz?“, Tagungsband Hochschul-Kupfersymposium, Bochum, (2004)

2003

  • Stelter M., Bombach H., Saltykov P.: „Use of lead alloy anodes in electrowinning of metals“, Proceedings EMC Kongress, Hannover, 2 (2003), p. 551-572
  • Stelter M., Roumiantsev V.: “Gas Flow Investigations in a Model of Imperial Smelting Furnace”, Proceedings EMC Kongress, Hannover, 3 (2003), p.1145-1157
  • Stelter M., Bombach H.: „Copper 2003 – Cobre 2003“, Volume 5, Copper Electrorefining and Electrowinning, Dutrizac J.E., Clement C.G. (editors), The Canadian Institute of Mining, Metallurgy and Petroleum, Montreal, Canada (2003), p. 555-567

2001

  • Khaled A., Bombach, H., Stelter, M.: Investigations on oxidizing leaching of copper wire granulates, Proceedings EMC, Friedrichshafen, 1 (2001), p. 37-48
  • Nesterov N., Bombach H., Stelter M.: „Effectiveness of Inhibitors and Activators in Copper Electrorefining“, Proceedings EMC, Friedrichshafen, 1 (2001), p. 121 – 130