AuthorsTitleJournalYearDOI/URL
Voigt O., Wendler M., Güpner M., Quitzke C., Hauser M., Bliedtner J., Zeidler H., Volkova O., Peuker U.Laser beam direct energy deposition coatings of blended high–carbon particles originating from recycled electro discharge machining waste of a H11 alloySurface and Coatings Technology, Volume 518, 15 December 2025, 1329242025DOI
Bretschneider L., Zeidler H.Mit Additiver Fertigung zur Kreislaufwirtschaft im Theaterkulissenbau – Potentiale und Herausforderungen des MEX-CRB mit Holzreststoffen12. Mitteldeutsches Forum „3D-Druck in der Anwendung“, 15. Oktober 2025, Hochschule Mittweida2025Link
Bretschneider L., Zeidler H.Vom Reststoff zum Prototyp – nachhaltige additive Fertigung im Reallabor SAMSax12. Mitteldeutsches Forum „3D-Druck in der Anwendung“, 15. Oktober 2025, Hochschule Mittweida2025Link
Käding L., Berkemeier A., Zeidler H., Bullinger A.C.Real-World Laboratories for Sustainable Innovation: Insights from the SAMSax Living Lab4th International Conference on Responsible Consumption and Production, 23-24 September, 2025, Chania, Crete:2025 
Bretschneider L., Gharehpapagh B., Lamottke M., Njiri J.G., Bah M.B., Zeidler H.Utilization of Agricultural Residues in Additive Manufacturing: Suitability study for Binder Jetting4th International Conference on Responsible Consumption and Production, 23-24 September, 2025, Chania, Crete:2025 
Gharehpapagh B., Denker M., Bretschneider L., Schade M., Gruhn R., Grab T., Zeidler H.Sustainable Geopolymer 3D Printing: Materials, Methods, and Applications4th International Conference on Responsible Consumption and Production, 23-24 September, 2025, Chania, Crete:2025 
Al-Khafaji M., Kadauw A., Abdulrazaq M.M., Zeidler H. A Hybrid Fuzzy-PSO Framework for Multi-Objective Optimization of Stereolithography Process ParametersMicromachines, 16, 1218 2025DOI
Abdulrazaq M.M.,  AL-Khafaji M., Kadauw A.The influence of slicing parameters on mechanical strength of FDM printed parts: A reviewAIP Conf. Proc. 3169, 0401042025DOI
Kadauw A., Böhme T., Zeidler H.Characterization of material properties of renewable biobased powder for 3D printing using the traditional moulding sand test methods of foundry technologyZanco Journal of Pure and Applied Sciences, Vol. 37 No. 22025DOI
Abdulamer D., Kadauw A.Experimental and numerical evaluation of the green sand compaction processCanadian Metallurgical Quarterly, 64(4), 2696–2707. 2025DOI
Gharehpapagh B., Denker M., Gadek S., Gruhn R., Grab T., Korniejenko K., Zeidler H.Geopolymer Materials for Additive Manufacturing: Chemical Stability, Leaching Behavior, and Radiological SafetyMaterials , 18, 48862025Link
Meißner S., Kalisch D., Aliyev R., Scholz S., Zeidler H., Müller S., Spickenheuer A., Kroll L.Load-Dedicated Fiber Reinforcement of Additively Manufactured Lightweight StructuresJournal of Composite Scince2025DOI
Denker M., Gharehpapagh B., Gruhn R., Pose S., Korniejenko K., Grab T., Zeidler H.Compressive strength of geopolymer with recycled carbon fibres manufactured in air and in water by casting and additive manufacturingFrontiers2025Link
Aliyev R. Planung von additiven FertigungsprozessenSpringer Vieweg2025DOI
Abbasov I., Aliyev R., Mamedov A. Investigation of the influences on energy consumption during turning and its modellingRT&A, Special Issue No. 7 (83), Vol.202025PDF
Lohani D., Gupta N.K., Zeidler H., Böttger T., Erler M., Streek A.Plasma Polishing as a Post-Processing Method for Surface Improvement in Macro-PBF-LB/M Components22. CIRP Conference on Electro Physical and Chemical Engineering ISEM XXII2025 
Ganesan G., Gupta N.K., Siddhartha S., Karade S.R., Zeidler H., Krishnaiyengari N. and Karunakaran P.Effect of Varying Layer Thickness by Interlayer Machining on Microstructure and Mechanical Properties in Wire Arc Additive ManufacturingPreprint2025DOI
Berkemeier A., Zeidler H., Gupta N.K., Bretschneider L., Bullinger A.C.Additive Manufacturing with Residues: Binder Jetting Applications in the SAMSax Living LabProceedings of euspen’s 25th International Conference & Exhibition2025PDF
Edaklavan Koroth J., Lebar A., Zeidler H., Valentinčič J.Plasma electrolytic polishing of additively manufactured lattice structures: influence of cell size and forced electrolyte flowProceedings of euspen’s 25th International Conference & Exhibition2025 
Abdulrazaq M.M., AL-Khafaji M.M.H., Salahaddin A.K., Krinke S. and Zeidler H.Out-Of-Position Bead Geometry Prediction in Wire Arc Additive Manufacturing (WAAM) Using Fuzzy Logic-Based SystemManagement Systems in Production Engineering; Vol. 33(1), pp. 46-532025DOI
Berkemeier, A.simul+ SAMSax und die Zukunft der additiven FertigungIngenieur-Nachrichten Vol. 33 (2), p. 62025 
Freitag L., Storti E., Bretschneider L., Zeidler H., Hubálková J. and Aneziris C.G.Binder jetting of spinel-based refractory materials - processing, microstructure and propertiesAdditive Manufacturing; Vol. 102, pp. 104727 ff.2025DOI
Koopmann E.T., Jäger T., Kaminsky C., Zeidler H.Development of heating strategies to reduce crack formation in the manufacturing process of tool components using directed energy depositionProgress in Additive Manufacturing, Vol. 10, pp. 1745–17532025DOI
Karade S.R., Siddhartha S., Gupta N.K., Ganesan G., Karunakaran K.P., Zeidler H.Hybridisation in Metal Wire Additive Manufacturing: A Case Study of an ImpellerMetals; Vol. 15(1), pp. 712025DOI
Koopmann E.T., Jäger T., Kaminsky C., Zeidler H.Development of heating strategies to reduce crack formation in the manufacturing process of tool components using directed energy deposition7th Fraunhofer Direct Digital Manufacturing Conference, DDMC 20252025PDF
Gromov A., Aliyev R., Zeidler H., Bast J.On the interaction of ceramic fillers with metal matrix during laser action under LPBF SynthesisConference: Metal Additive Manufacturing Conference2024PDF
Valentinčič J., Koroth J.E., Zeidler, H.Advancements in surface finish for additive manufacturing of metal parts: a comprehensive review of plasma electrolytic polishing (PEP)Virtual and Physical Prototyping; Vol. 19(1)2024DOI
Aubel I., Krinke S., Mende R., Dietrich A., Bertau M., Zeidler H., Zug S.Industry 4.0-Driven STEM-Lab Modernisation: Balancing Flexibility and SustainabilityChemie Ingenieur Technik; Vol. 96(11), pp. 1482-14892024DOI
Navickaitė K., Nestler K., Sherstneva A., Langenhan S., Penzel M., Wendler M., Burkhardt C., Volkova O., Biermann H., Zeidler H.Selective surface treatment using the standing-wave-PEPProceedings of the 20th INSECT 2024 : International Symposium on Electrochemical Machining Technology 20242024DOI
Denker M., Lamottke M., Micke L., Kühnel L., Zeidler H.Material extrusion printer for pastes based on a commercial desktop filament printer for plasticsHardware Konferenz 2024 (accepted)2024 
Krinke S., Zeidler H., Trensch G., Nest M., Koch F.Modell zur Berechnung der Schweißraupenhöhen beim mehrlagigen Drahtauftragschweißen zur Anwendung für die additive Fertigung (WAAM). Schweißen und Schneiden, 2024 (submitted)2024 
Shah A., Gupta N.K., Aliyev R., Zeidler H.Study of Various Process Parameters on Bead Penetration and Porosity in Wire Arc Additive Manufacturing (WAAM) of Copper Alloy Cu1897Applied Sciences; Vol. 14(20), pp. 91882024DOI
Koopmann E.T., Zaffino G., Kaminsky C., Zeidler H.Investigation of strategies to prevent crack formation in the hybrid-additive manufacturing process of tool components using directed energy depositionRTe-Journal 2024 (accepted for publication)2024 
Micke L., Sandmann K., Zeidler H., Mwangi J.M., Karanja S.K.Long-term properties of Binder Jetting parts made from Water Hyacinth and Polyvinyl AlcoholProceedings of the RapidTech Conference 2024 (accepted)2024 
Aliyev R.Specifics of the Planning of Additive Manufacturing ProcessesAdvances in Science and Technology, 148:273-2792024DOI
Shah A., Aliyev R., Zeidler H., Krinke S.Investigation for Multi-Layer CuAl8 and Multi-Material (CuAl8-Mild Steel) Deposition via WAAM ProcessAdvances in Science and Technology, 148:47-562024DOI
Lamottke M., Zeidler H., Voigt O.Recycling of erosion sludge particles for laser beam direct energy depositioneuspen's Special Interest Group Sustainability meeting2024PDF
Berkemeier A., Zeidler H.3D Printing Meets Sustainability: SAMSax – A Living Lab for Circular Economyeuspen's Special Interest Group Sustainability meeting2024PDF
Valentinčič J., Zeidler H., Böttger T., Jerman M.Influence of Anode Immersion Speed on Current and Power in Plasma Electrolytic PolishingMicromachines; Vol. 15(6), pp. 7832024DOI
Koroth J.E., Valentinčič J., Jerman M., Sabotin I., Lebar A., Govekar E., Jeromen A., Zeidler H., Böttger T., Tischner F., Zohar-Hauber K. and Osovski S.Plasma electrolytic polishing of additively manufactured metal parts: Optimising the post processing workflow [version 1; peer review: awaiting peer review]Open Research Europe; Vol. 4(48)2024DOI
Voigt O., Lamottke M., Wendler M., Zeidler H., Peuker U.Recycling of Erosion Sludge Particles for Laser Beam Direct Energy DepositionProceedings of euspen’s 24th International Conference &
Exhibition, Dublin		2024PDF
Navickaitė K., Nestler K., Wegner J., Kleszczynski S., Penzel M., Böttger-Hiller F., Zeidler H.Plasma electrolytic polishing of bulk metallic glasses: what determines success?Proceedings of euspen’s 24th International Conference &
Exhibition, Dublin		2024PDF
Berkemeier A., Kühnel L., Dürigen D., Hoffmann H., Zeidler H., Bullinger A.C., Wagenführ A.SAMSax-An Innovative Living Lab for the Advancement of a Circular Economy through Additive Manufacturing TechnologiesSustainability (Switzerland); Vol. 16(2)2024DOI
Navickaitė K., Langenhan S., Köckritz J., Sherstneva A., Nestler K., Penzel M., Wendler M., Szlosarek R., Hauser M., Volkova O., Kröger M., Zeidler, H.Three modes of plasma electrolytic polishing of high-alloy austenitic steelResults in Surfaces and Interfaces; Vol. 17, pp. 1002882024DOI
Navickaitė K., Nestler K., Penzel M., Böttger-Hiller F., Zeidler H.Preliminary experimental study on simultaneous polishing and shape setting of Nitinol wireSN Applied Sciences; Vol. 5(10)2023DOI
Navickaitė K., Böttger T., Nestler K., Penzel M., Schröder S., Stepputat V., Böttger-Hiller F., Zeidler H.Electrolyte optimisation for effective plasma electrolytic polishing of brassResults in Surfaces and Interfaces; Vol. 12, pp. 1001332023DOI
Shah A., Aliyev R., Zeidler H., Krinke S.A Review of the Recent Developments and Challenges in Wire Arc Additive Manufacturing (WAAM) ProcessJournal of Manufacturing and Materials Processing; Vol. 7(3), pp. 972023DOI
Denker M., Lamottke M., Böttger T., Degu T., Alevras D., Rosental T., Fuhrmann S., Magdassi S., Zeidler H.Additive Manufacturing of glass: post process surface treatment of DLP partsproceedings of euspen’s 23rd International Conference & Exhibition2023 
Salih R.M., Kadauw A., Zeidler H. and Aliyev R.Investigation of LCD 3D Printing of Carbon Fibre Composites by Utilising Central Composite DesignJournal of Manufacturing and Materials Processing; Vol. 7(2), pp. 582023DOI
Asche S.3D-Drucker verwandeln Abfall in BauteileVDI Nachrichten Nr. 3 10.02.2023, p.102023 
Kühnel L., Heinz A., Dürigen D., Zeidler H.SAMSax – Nachhaltige additive Fertigung in Sachsen. Acamonta 30 (2023), pp. 69-70, ISSN 2193-309X2023 
Zeidler H., Bullinger-Hoffmann A.Mehr als Abfall. Der 3D-Druck komplexer Bauteilemit ReststoffenIM+io – Nest & Next Practices aus Digitalisierung, Management und Wissenschaft 38 (2023) 01, pp. 56-59. ISSN 1616-10172023 
Krinke S., Zeidler H.Grundlage zum Berechnen der Gesamtschweißhöhe für das formgebende MSG-Schweißen in ZwangslagenTagungsband zur 3. Tagung Additive Manufacturing, 2023, DVS SLV Halle2023 
Navickaitė K., Zeidler H., Nestler K., Penzel M., Böttger-Hiller F.Effizientes Polieren von additiv hergestellten TitanlegierungenOberflächen Polysurfaces, 64. Jahrgang, Heft 6, November-Dezember 2023. 2023 
Kariuki L., Ikua B.W., Karanja S.K., Ng'ang'a S.P., Zeidler H.Fused Filament Fabrication of Carbon Fiber-reinforced Polymer Composite: Effect of Process Parameters on Flexural PropertiesEngineering Reports  (2023) e12807 DOI
Shah A., Zeidler H., Krinke S.Investigation of process parameters in CuAl8 deposition under the influence of different material deposition angles via CMT-based WAAM processproceedings of euspen’s 23rd International Conference & Exhibition2023 
Navickaitė K., Nestler K., Böttger-Hiller F., Penzel M., Zeidler H.Plasma electrolytic polishing of additively manufactured metallic glassproceedings of euspen’s 23rd International Conference & Exhibition2023 
Navickaitė K., Nestler K., Wegner J., Kleszczynski S., Böttger-Hiller F., Penzel M., Zeidler H.Plasma electrolytic polishing of additively manufactured bulk metallic glasses – Cu-Ti-Zr-Ni-SnThe 19th International Symposium on Electrochemical Machining Technology (INSECT), Saarbrücken, Deutschland. 2023 
Navickaitė K., Langenhan S., Sherstneva A., Köckritz J., Nestler K., Penzel M., Weidner A., Wendler M., Szlosarek R., Biermann H., Volkova O., Zeidler H., Kröger M.Surface treatment of additively manufactured high-alloy austenitic steel parts with the aim to prolong fatigue lifeproceedings of RapidTech 20232023 
Aliyev R., Krinke S., Zeidler H., Voigt K.Einsatz der Additiven Fertigung im Musikinstrumentenbau.  VDI-Z, Heft 01-02, 165(2023), S. 67-692023DOI
Aliyev R., Zeidler H., Krinke S., Voigt K.Developing new areas of application and supporting structural change: Use of additive manufacturing in the construction of musical instruments,Einsatz der Additiven Fertigung im MusikinstrumentenbauVDI-Z Integrierte Produktion; Vol. 165(1-2), pp. 67-692023 
Wamuti G.N., Mwangi J.W., Karanja S.K., Micke L., Zeidler H.Optimisation of Extrusion Process Parameters of Recycled High-Density Polyethylene-Thermoplastic Starch Composite for Fused Filament FabricationOpen Journal of Composite Materials; Vol. 13(04), pp. 69-862023DOI
Hadi A., Kadauw A., Zeidler, H.The effect of printing temperature and moisture on tensile properties of 3D printed glass fibre reinforced nylon 6Materials Today: Proceedings; Vol. 91, pp. 48-552023DOI
Aliyev R., Lamottke M., Zeidler H. E-Didaktik im internationalen Lehren der additiven Fertigungdie hochschullehre 292022DOI
Zeidler H., Böttger T., Schröder S., Schneider M., Lämmel C., Sahr F., Tardelli J. and Exbrayat L.Analysis of Plasma-Electrolytic Polishing Process InitiationProcedia CIRP; Vol. 108(C), pp. 782-7862022 
Quitzke S., Kröning O., Safranchik D., Zeidler H., Danilov I., Martin A., Böttger-Hiller F., Essel S., Schubert A.Design and setup of a jet-based technology for localised small scale Plasma electrolytic PolishingJournal of Manufacturing Processes; Vol. 75, pp. 1123-11332022 
Lamottke M., Micke L., Zeidler H., Berger T., Loebel S., Martin A., Schubert A., Steinert P., Müller P.EFFICIENT FUSED FILAMENT FABRICATION OF LARGE-SCALE PARTS WITH HIGH RESOLUTION2022 ASPE and euspen Summer Topical Meeting on Advancing Precision in Additive Manufacturing, pp. 126-1302022 
Navickaite K., Roßmann K., Nestler K., Böttger-Hiller F., Penzel M, Grund T., Lampke T., Zeidler H.Plasma Electrolytic Polishing of Porous Nitinol StructuresPlasma 5 (2022), pp. 555-5682022DOI
Navickaite K., Rossmann K., Nestler K., Böttger-Hiller F., Penzel M., Grund T., Lampke T., Zeidler H.Plasma electrolytic polishing of porous Nitinol structuresProceedings of the 18th International Symposium on Electrochemical Machining Technology (2022), pp. 103-1082022 
Navickaite K., Nestler K., Kain M., Tosello G., Calaon M., Pedersen D.B., Penzel M., Böttger-Hiller F., Zeidler H.Effective polishing of inner surfaces of additive manufactured inserts for polymer extrusion using Plasma Electrolytic PolishingProceedings of the 18th RapidTech 3D Conference (2022), pp.52-61. ISBN 978-3-446-47529-82022 
Navickaite K., Nestler K., Böttger-Hiller F., Matias C., Diskin A., Golan O., Garkun A., Strokin E., Biletskiy R., Safranchik D., Zeidler H.Efficient polishing of additive manufactured titanium alloysProcedia CIRP; Vol. 108(C), pp. 346-3512022

DOI

 

Zeidler H., Böttger-Hiller F.Plasma-Electrolytic Polishing as a Post-Processing Technology for Additively Manufactured PartsChemie-Ingenieur-Technik; Vol. 94(7), pp. 1024-10292022 
Schulze H.-P., Zeidler H., Kröning O., Böttger-Hiller F., Herzig M.Process analysis of plasma-electrolytic polishing (PeP) of forming toolsInternational Journal of Material Forming; Vol. 15(1)2022 
Aliyev R. Vorrichtung zur Handhabung von mit einem additiven Herstellungsverfahren hergestellten GießformenPatent: DE102021212122A12021 
Kühnel L., Hartmann T., Stiller A., Rinberg R., Nendel W., Zeidler H.Additive production processes for the manufacturing of customised bio-based packagingProceedings of the 2nd International Conference on Circular Packaging, Ljubljana, Slovenia, 2021, S. 269-275, ISBN 978-961-90424-6-52021 
Aliyev R., Hentschel B. HSC-Fräsen von stäubenden Werkstoffen: Strategien zur Auslegung von Prozess und KomponentenSpringer Vieweg2021DOI
Zeidler H., Aliyev R., Gindorf F.Efficient Finishing of Laser Beam Melting Additive Manufactured PartsJournal of Manufacturing and Materials Processing; Vol. 5(4), pp. 1062021DOI
Navickaitė K., Ianniciello L., Tušek J., Engelbrecht K., Bahl C.R.H., Penzel M., Nestler K., Böttger-Hiller F., Zeidler, H.Plasma Electrolytic Polishing of Nitinol: Investigation of Functional PropertiesMaterials; Vol. 14(21), pp. 64502021DOI
Stepputat V.N., Zeidler H., Safranchik D., Strokin E., Böttger-Hiller F.Investigation of Post-Processing of Additively Manufactured Nitinol Smart Springs with Plasma-Electrolytic PolishingMaterials; Vol. 14(15), pp. 40932021DOI
Nitzsche S., Zeidler H., Frank R., Schubert T.Experimental investigation of the manufacturability of a very fine optimised venting system using a combination of SLM and EDMProceedings of the 21st International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2021, pp. 73-742021 
Aliyev R., Zeidler H.Technological assurance of the end quality of additively manufactured metallic parts. Machine building and EnergyNew Concepts and Technologies” international scientific conference in Baku, 02-03. Dezember 2021.2021 
Zeidler H., Böttger-Hiller F., Penzel M., Böttger T.Plasmaelektrolytisches Polieren von additiv gefertigten Bauteilen aus KupferKupfer-Symposium 2021: Werkstofftagung vom 24.–25. November 2021 in Jena.2021 
Zeidler H.Towards circular economy: Upcycling waste material as input for Additive Manufacturing5th Conference on Additive Technologies. Kalibr. Technopark 2021, Moscow, Russia2021 
Zeidler H., Schröder S., Böttger T., Schneider M., Lämmel C., Sahr F., Tardelli J., Exbrayat L.Investigation of plasma-electrolytic polishing (PeP) process initiation17th International Symposium on Electrochemical Machining Technology INSECT 2021, Belgium2021 
Belitz S., Eder M., Miniger S., Zeidler H., Weigold M.Hybrid-additive punch production for shear cutting using multi-material Laser Metal DepositionSAMPE Europe Conference 2021, Baden/Zürich, Switzerland2021 
Kühnel L., Jerman M., Müller M., Valentinčič J., Zeidler H.Additive Manufacturing of bio-based materials - Binder Jetting of peach kernel powderWitt, Gerd (Hrsg.): Proceedings of the 17th Rapid.Tech Conference. München: Carl Hanser Verlag, S. 115-126, E-Book-ISBN: 978-3-446-47173-32021 
Zeidler H.Reststoff-Upcycling durch additive Fertigung19. Holztechnologisches Kolloquium. Dresden2021 
Belitz S., Scheider D., Zeidler H.Hybrid-Additive Manufacturing Of Press Tools With Laser Direct Energy Deposition Using Buffer Layers To Reduce Cracking IssuesEuro PM2021 Congress Proceedings2021 
Krinke S., Zeidler H., Witt S., Gaßmann C.Influence of deposition angle in hybrid wire arc additive manufacturingProceedings of the 21st International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2021, pp. 85-862021 
Stepputat V., Safranchik D., Zeidler H., Böttger-Hiller F.Influence of plasma electrolytic polishing on the surface morphology of additively manufactured Ni-Ti-parts investigated on the basis of smart springsProceedings of the 21st International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2021, pp. 83-842021 
Mäller C., Oelmann M., Zeidler H.Optimisation of a large-volume FFF-PrinterProceedings of the 21st International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2021, pp. 87-882021 
Schirmer R., Abendroth M., Roth S., Kühnel L., Zeidler H., Kiefer, B.Simulation-supported characterisation of 3D-printed biodegradable structuresGAMM Mitteilungen; Vol. 44(4)2021 
Jerman M., Krinke S., Kühnel L., Müller M., Valentini J., Zeidler H.Additive manufacturing using renewable materials: Concept of upcycling peach kernels for use in Binder Jetting and FFFProceedings of the 20th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2020, pp. 123-1242020 
Belitz S., Zeidler H.Hybrid-Additive manufacturing of tool components – investigation of mechanical properties and connection strength to the substrateMetal Additive Manufacturing Conference [MAMC], Vienna/online2020 
Zeidler H., Böttger-Hiller F., Penzel M., Böttger T., Leihkauf H.Electrolyte flow in Plasma-electrolytic PolishingProceedings of the 16th International Symposium on Electrochemical Machining Technology [INSECT], Chemnitz/online, ISBN 978-3-95735-125-82020 
Zeidler H., Böttger-Hiller F., Penzel m., Böttger T.Workpiece temperature during plasma-electrolytic polishingProceedings of the 16th International Symposium on Electrochemical Machining Technology [INSECT], Chemnitz/online, ISBN 978-3-95735-125-82020 
Zeidler H.3D-Druck mit nachwachsenden RohstoffenVirtuelle Innovationsakademie Bioökonomie, Potsdam/online2020 
Kühnel L., Zeidler H., Valentinčič J., Jerman M., Müller M., Langgemach E.Additive Manufacturing using renewable materials – status and prospects5th International Conference on Bioinspired and Biobased Chemistry and Materials, Nice/online2020 
Güpner M., Rochholz C., Bliedtner J., Zeidler H.Process characterization in laser metal deposition of hot work tool steel11th CIRP Conference on Photonic Technologies [LANE], erlangen/online2020 
Zeidler H.3D-Drucken mit nachwachsenden RohstoffenCARMEN Symposium Bioökonomie mit Miscanthus und Hanf, online2020 
Kühnel L., Zeidler H.Nachwachsende Rohstoffe in der Additiven Fertigung – Stand und PerspektivenFachtagung Werkstoffe und Additive Fertigung, Potsdam/online2020 
Zeidler H., Böttger-Hiller F.Oberflächenfinish additiv gefertigter Bauteile mit Plasma-elektrolytischem PolierenFachtagung Werkstoffe und Additive Fertigung, Potsdam/online2020 
Valentinčič J., Jerman M., Krinke S., Zeidler H.Residuals of biobased materials for additive manufacturing. Congress on Advances in 3D Printing and ModelingPorto/online, 20202020 
Zeidler H., Valentinčič J., Jerman M., Kühnel L., Müller M.Reststoff-Upcycling durch additive Fertigung. holztechnologie 61 (2020) 3, Pages 39-422020 
Kühnel L., Zeidler H.Characterisation and usability of powders from renewable raw materials for 3D printingProceedings of the 20th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2020, pp. 141-1422020 
Belitz S., Todzy T., Jäger A., Zeidler, H.Hybrid-additive manufacturing of tool components: Simulative design of the laser metal deposition process,Numerische auslegung des pulverbasierten laserauftragschweißprozesses: Hybrid-additive fertigung von WerkzeugkomponentenWT Werkstattstechnik Vol. 110(6), pp. 418-4232020 
Kranhold C., Kröning O., Schulze H.-P., Herzig M., Zeidler H.Investigation of stable boundary conditions for the Jet-electrolytic Plasma Polishing (Jet-ePP)Procedia CIRP; Vol. 95, pp. 987-9922020 
Kröning O., Schulze H.-P., Kranhold C., Herzig M.,  Zeidler H.Investigation of the ignition phase in electrolytic plasma polishing under different starting conditionsProcedia CIRP; Vol. 95, pp. 993-9982020 
Zeidler H., Wohlrabe D.Innovative Werkstoffe für neue Fertigungsverfahren –Einsatzmöglichkeiten und Potentiale für nachwachsende Rohstoffe in der additiven FertigungLernen & Lehren 132 (2019), ISSN 0940-73402019 
Zeidler H., Klemm D., Böttger-Hiller F.3D-Druck mit nachwachsenden Rohstoffen Stand und Perspektivenholztechnologie 60 (2019) 2, Pages 49-542019 
Zeidler H., Helm A.Surface finish of AM copper parts by Plasma electrolytic PolishingProceedings of the 15th International Symposium on ElectroChemical Machining Technology 2019, Saarbrücken, 2019, ISBN 978-3-00-064086-52019 
Zeidler H.Kombination von neuen Fertigungsverfahren und nachhaltigen Materialien: nachwachsende Rohstoffe in der additiven FertigungAcamonta 26, 2019, ISSN 2193-309X2019 
Zeidler H., Böttger-Hiller F.Ultrasonic-assisted Plasma-electrolytic PolishingProceedings of the 15th International Symposium on ElectroChemical Machining Technology 2019, Saarbrücken, 2019, ISBN 978-3-00-064086-52019 
Belitz S., Todzy T., Kaminsky C., Zeidler H.Alternative solutions to crack issues considering laser metal deposition in hybrid-additive manufacturing of press tools. proceedings of Lasers in Manufacturing (LIM) conference, München2019 
Zeidler H., Böttger-Hiller F.Postprocessing von additiv hergestellten Metallstrukturen mit plasmaelektrolytischem Polieren24. Fachtagung Rapid Prototyping, Lemgo2019 
Kröning O., Schulze H.-P., Zeidler H., Kranhold C.Das Plasma-elektrolytische Polieren von Werkstücken für den medizin-technischen Einsatz14. Magdeburger Maschinenbautage, Magdeburg2019 
Zeidler H., Böttger-Hiller F.3D-Drucken mit nachwachsenden RohstoffenProceedings of the 10th international meeting of MEG, Frantiskovy Lazne2019 
Kranhold C., Schulze H.-P., Kröning O., Zeidler H.Classification and evaluation of optical phenomena in Jet-PeP with respect to the characteristic of plasma electrolytic polishingProceedings of the 15th International Symposium on ElectroChemical Machining Technology 2019, Saarbrücken, 2019, ISBN 978-3-00-064086-52019 
Todaro I., Squatrito R., Essel S., Zeidler H.Highly conductive aluminium metal matrix composites with carbon inserts obtained by casting processesMaterials Today: Proceedings; Vol. 10, pp. 277-2872019 
Tosello G., Gulcur M., Whiteside B., Coates P., Luca A., De Sousa Lia Fook P., Riemer O., Danilov I., Zanjani M., Hackert-Oschätzchen M., Schubert A., Baruffi F., Achour S., Calaon M., Nielsen C., Bissacco G., Cannella E., Rasmussen, A., Bellotti M., Saxena K., Qian J., Reynaerts D., Santoso T., Syam W., Leach R., Kose S., Parenti P., Annoni M., Cai Y., Luo X., Qin Y., Zeidler, H.Micro product and process fingerprints for zero-defect net-shape micromanufacturingEuropean Society for Precision Engineering and Nanotechnology, Conference Proceedings - 19th International Conference and Exhibition, EUSPEN 2019, pp. 98-992019 
Mwangi J., Nguyen L., Bui V., Berger T., Zeidler H., Schubert A.Nitinol manufacturing and micromachining: A review of processes and their suitability in processing medical-grade nitinolJournal of Manufacturing Processes; Vol. 38, pp. 355-3692019DOI
Zeidler H., Böttger-Hiller F., Krinke S., Parenti P., Annoni, M.Surface finish of additively manufactured parts using plasma electrolytic polishingEuropean Society for Precision Engineering and Nanotechnology, Conference Proceedings - 19th International Conference and Exhibition, EUSPEN 2019, pp. 228-2292019 
Reinhardt F., Böttger-Hiller F., Kranhold C., Schulze H.-P., Kröning O., Zeidler H., Lampke T.Surface modification for corrosion resistance of electrically conductive metal surfaces with plasma electrolytic polishingAIP Conference Proceedings; Vol. 21132019 
Conner B., Essel S., Paul S., Wertheim R., Pasang T., Butcher D., Zeidler H., Dahotre N., Pande S., Banerjee R., Cuesta-Lopez S., Babcsan N., Solomon, V.Technological Innovations in Metals EngineeringJOM; Vol. 71(2), pp. 651-6542019 
Zeidler H., KlemmD., Böttger-Hiller F., Fritsch S., Joo Le Guen M., Singamneni S.3D printing of biodegradable parts using renewable biobased materialsProcedia Manufacturing, Volume 21, 2018, Pages 117-124, ISSN 2351-97892018

 

DOI

Zeidler H.; Boettger-Hiller F. Surface Finish of AM parts using Plasma electrolytic PolishingProceedings of the World Congress on Micro and Nano Manufacturing WCMNM 2018, Portoroz, 2018; Pages 385-388, ISBN 978-981-11-2728-12018 
Zeidler H.Biobased and biodegradable materials for additive manufacturingMIT conference 2018, Izola, Slovenia2018 
Zeidler H.Surface modification of AM parts using plasma electrolytic polishing; Technological Innovations in Metals Engineering (TIME2018) conference, Haifa2018 
Zeidler H.Prozessketten und Oberflächenfinish in der Additiven FertigungKeynote Thüringer Maschinenbautag 2018, Erfurt, 20182018 
Zeidler H.Additive Fertigung metallischer Werkstücke – Stand und TrendsInnovation Produktionsautomatisierung, Zerspan- und Abtragtechnik, Dresden, 2018 2018 
Singamneni S., Behera M.P., Le Guen M., Zeidler H.Mechanism of Bonding in Seashell Powder Based Ceramic Composites Used for Binder-Jet 3D PrintingBioceramics Development and Applications, Volume 8:1, 2018, ISSN: 2090-5025201810.4172/2090-5025.1000108
Zeidler H.Der Themenbereich „Additive Fertigungsverfahren" im Unterricht berufsbildender Schulen28. BAG-Fachtagung 2018, Berlin, 20182018 
Zeidler H., Klemm D., Böttger-Hiller F., Fritsch S., Le Guen M., Singamneni, S.3D printing of biodegradable parts using renewable biobased materialsProcedia Manufacturing; Vol. 21, pp. 117-1242018 
Streb F., Lampke T., Lampke T., Zeidler, H.Novel materials for heat dissipation in semiconductor technologies( 77 ), pp. Online-Ressource School: Chemnitz, Chemnitz University of Technology2018 
Mwangi J., Bui V., Berger T., Zeidler H., Schubert, A.RC - Generator circuit pulse analysis for micro-EDM of high aspect ratio nitinol boresEuropean Society for Precision Engineering and Nanotechnology, Conference Proceedings - 18th International Conference and Exhibition, EUSPEN 2018, pp. 407-4082018 
Zeidler H.; Boettger-Hiller F.Surface modification using plasma electrolytic polishingproceedings of the International Symposium on ElectroChemical Machining Technology INSECT 2017, Dresden, 20172017 
Zeidler H., Boettger-Hiller F., Wunderlich A.Surface finish of additively manufactured parts using plasma electrolytic polishingEuspen SIG meeting Dimensional Accuracy and Surface Finish in Additive Manufacturing, Leuven, 2017, ISBN: 978-0-9957751-1-42017 
Zeidler H., Klemm D., Böttger-Hiller, F., Fritsch S., Le Guen M.J., Singamneni, S.3D printing of biodegradable parts using renewable biobased materials15th Global Conference on Sustainable Manufacturing, Haifa, 20172017 
Zeidler H.Mikrofertigungstechnik anhand des Kooperationsprojektes THERMACOInfineon PhD Kolloquium, Regensburg, 20172017 
Zeidler H.Anisotropic Carbon/Aluminium based material composites for efficient heat transportUltraWire 2017 workshop, Cambridge, 20172017 
Zeidler H.Manufacturing using biobased materialsChemnitzer Seminar: nanotechnology, nanomaterials, nanoreliability; Chemnitz2017 
Mwangi J. W., Zeidler H., Wohlschlögel M., Bräuner C., Schubert A.Heat-affected zone analysis for laser-cut and micro-electrical discharge machined nitinolProceedings of the International Conference on Shape Memory and Superelastic Technologies (SMST), 20172017 
Rajput A., Zeidler H., Schubert, A.Analysis of voltage and current during the Plasma electrolytic Polishing of stainless steelProceedings of the 17th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2017, pp. 193-1942017 
Zanjani M., Zeidler H., Martin A., Schubert, A.Application of laser scanning as a Pre-machining metrology technique in Jet-ECMProceedings of the 17th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2017, pp. 185-1862017 
Kühn R., Berger T., Prieske M., Börner R., Hackert-Oschätzchen M., Zeidler H., Schubert, A.Deposition and micro electrical discharge machining of CVD-diamond layers incorporated with siliconAIP Conference Proceedings; Vol. 18962017 
Mwangi J., Zeidler H., Berger T., Schubert A.Influence of dielectric fluid and tool electrode choice on micro-EDMed nitinol surface integrityProceedings of the 17th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2017, pp. 301-3022017 
Edelmann J., Albrecht M., Zeidler H., Gehde M., Schubert, A.Investigation of various graphene fillers for improving properties of thermoplastic polymersProceedings of the 17th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2017, pp. 133-1342017 
Katz-Demyanetz A., Squatrito R., Todaro I., Essel S., Zeidler H., Bamberger, M.Manufacturing of aluminium metal matrix cast composites with carbon based additives for thermal management applicationsMaterials Science Forum; Vol. 879, pp. 909-9142017 
Böttger-Hiller F., Nestler K., Adamitzki W., Glowa G., Zeidler, H.Plasma-electrolytical polishing of copper and its alloys,Plasma-electrolytical polishing of copper and its alloysGalvanotechnik; Vol. 108(10), pp. 1990-19962017 
Kühn R., Prieske M., Zeidler H., Schubert A., Vollertsen F.Lokale Beeinflussung der Oberflächenrauheit von Silizium dotiertem CVD-Diamant durch funkenerosive MikrobearbeitungDry Metal Forming Open Access Journal. - BIAS - Bremer Institut für angewandte Strahltechnik GmbH, 2016, 2, S. 50-552016 
Zeidler H., Nestler K., Böttger-Hiller F., Schubert A., Previtali B., Demir A. G.Plasma-electrolytic polishing of laser-machined coronary stentsProceedings of the 12th International Symposium on Electrochemical Machining Technology, 2016, ISBN 978-9-4619746-1-72016 
Katz-Demyanetz A., Squatrito R., Todaro I., Essel S., Zeidler H., Bamberger M.Manufacturing of aluminum metal matrix cast composites with carbon based additives for thermal management applicationsProc. of THERMEC’2016 International Conference on Processing & Manufacturing of Advanced Materials Processing, Fabrication, Properties, Applications, 473, 2016, S. 2812016 
D. Klemm, W. Meyer, G. Glowa, H. Zeidler3D-Printing Using Conditioned Miscanthus – Application for Special PackagingDigital Direct Manufacturing Conference DDMC 2016, Berlin2016 
Steinert, P.; Nestler, A.; Kühn, J.; Schubert, A.Efficient Manufacturing of Tribological Surfaces by Turning Technologies with Alternating MovementsProc. of International Conference on Competitive Manufacturing (COMA 16), 2016, S. 255-260, ISBN 978-0-7972-1602-02016 
Zinecker, M., Penzel, M., Zeidler, H. and Schubert, A.Combination of aluminium with carbon-based applications,Combination of aluminium with carbon-based insertsConstruction; Vol. 68(7-8), pp. IW4-IW62016 
Streb, F., Zeidler, H., Penzel, M., Schubert, A. and Lampke, T.Evaluation of metal-matrix composites baseplates with anisotropic thermal conductivity insertsPCIM Europe 2016; International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management, pp. 976-9832016 
Zeidler, H., Nestler, K., Böttger-Hiller, F., Schubert, A., Previtali, B. and Demir, A.Finishing of laser-machined coronary stents by plasma electrolytic polishingProceedings of the 16th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 20162016 
Schubert, A., Hackert-Oschätzchen, M., Martin, A., Winkler, S., Kuhn, D., Meichsner, G., Zeidler, H. and Edelmann, J.Generation of Complex Surfaces by Superimposed Multi-dimensional Motion in Electrochemical MachiningProcedia CIRP; Vol. 42, pp. 384-3892016 
Clauß, B., Nestler, A., Zeidler, H., Schubert, A. and Rizzi, L.Generation of thermally effective surface structures by ultrasonic vibration assisted turningProceedings of the 16th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 20162016 
Schubert, A., Zeidler, H., Kühn, R., Hackert-Oschätzchen, M., Flemmig, S. and Treffkorn, N.Investigation of Ablation Behaviour in Micro-EDM of Nonconductive Ceramic Composites ATZ and Si3N4-TiNProcedia CIRP, Vol. 42, pp. 384-3892016 
Schulze, R., Jahn, S., Zeidler, H., Lindner, T. and Schubert, A.Multi material ultrasonic joining using microstructured joining partnersProceedings of the 16th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 20162016 
Nestler, K., Böttger-Hiller, F., Adamitzki, W., Glowa, G., Zeidler, H. and Schubert, A.Plasma Electrolytic Polishing - An Overview of Applied Technologies and Current Challenges to Extend the Polishable Material RangeProcedia CIRP; Vol. 42, pp. 503-5072016 
Böttger-Hiller, F., Nestler, K., Zeidler, H., Glowa, G. and Lampke, T.Plasma electrolytic polishing of metalised carbon fibresAIMS Materials Science; Vol. 3(1), pp. 260-2692016 
Streb, F., Ruhl, G., Schubert, A., Zeidler, H., Penzel, M., Flemmig, S., Todaro, I., Squatrito, R. and Lampke, T.Simulations and measurements of annealed pyrolytic graphite-metal composite baseplatesIOP Conference Series: Materials Science and Engineering; Vol. 118(1)2016 
Mwangi, J., Zeidler, H., Kühn, R. and Schubert, A.Suitability assessment of micro-EDM in machining Nitinol for medical applicationsProceedings of the 16th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 20162016 
Zeidler, H., Boettger-Hiller, F., Edelmann, J. and Schubert, A.Surface Finish Machining of Medical Parts Using Plasma Electrolytic PolishingProcedia CIRP; Vol. 49, pp. 83-872016 
D. Klemm; W. Meyer; G. Glowa; H. ZeidlerNutzung von 3D-Printing für die Herstellung von Verpackungen aus aufbereitetem MiscanthusstrohVerarbeitungsmaschinen und Verpackungstechnik 2015, Dresden2015 
Qian, J.; Zeidler, H.High precision technologies for micro manufacturing Vortrag beim Industrial Workshop "Revolutionary Technologies in Micro Injection Moulding", KU Leuven, 20152015 
Quagliotti, D.; Tosello, G.; Islam, A. M.; Hansen, H. N.; Zeidler, H.; Martin, A.; Schubert, A.; Brandao, C.; Riemer, O.A method for dimensional and surface optical measurements uncertainty assessment on micro structured surfaces manufactured by JET-ECMProceedings of the 4M/ICOMM2015 Conference, 2015, 138, S. 554-557201510.3850/978-981-09-4609-8_138
Zeidler, H.; Martin, A.; Kowalick, M.; Hackert-Oschätzchen, M.; Schubert, A.Analysis of a PECM Electrode Concept for Micro Injection Moulds by Multiphysics SimulationProceedings of the 4M/ICOMM2015 Conference, 2015, 137, S. 550-553201510.3850/978-981-09-4609-8_137
Zeidler, H.; Kuhn, D.; Martin, A.; Meichsner, G.; Schubert, A.Increasing accuracy and machining speed in precise electrochemical machining of a micro injection molding cavityProceedings of the 4M/ICOMM2015 Conference, 2015, 135, S. 542-545201510.3850/978-981-09-4609-8_135
Schubert, A., Zeidler, H., Flemmig, S., Penzel, M., Krönert, M., Meichsner, G. and Essel, S.Challenge of machining aluminium matrix composites reinforced by diamondsProceedings of the 15th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2015, pp. 309-3102015 
Kröning, O., Herzig, M., Hackert-Oschätzchen, M., Kühn, R., Zeidler, H. and Schubert, A.Micro electrical discharge machining of tungsten carbide with UltraShort pulseKey Engineering Materials; Vol. 651-653, pp. 759-7642015 
Börner, R., Scholz, P., Kühn, R., Schubert, A., Zeidler, H. and Müller, R.Micro structuring of coated tools for dry sheet metal forming of aluminium alloysProceedings of the 15th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2015, pp. 85-862015 
Klemm, D., Meyer, W., Glowa, G. and Zeidler, H.Utilisation of 3D printing for the production of packaging from recycled miscanthus straw, pp. online resource2015 
Quagliotti, D., Tosello, G., Islam, A., Hansen, H., Zeidler, H., Martin, A., Schubert, A., Brandao, C. and Riemer, O.Optical micro-metrology of structured surfaces micro-machined by jet-ECMProceedings of the 15th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2015, pp. 167-1682015 
Schubert, A., Zeidler, H., Martin, A., Hackert-Oschätzchen, M., Kempen, K. and Kruth, J.-P.Jet-Electrochemical machining of selective laser melted aluminium and steel alloys for micro injection mouldsConference Proceedings - 14th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 20142014 
Zhang, R., Schubert, A. and Zeidler, H.Manufacturing of twist-free surfaces by start-stop-turning,Twist-free machining by start-stop-turningZWF Zeitschrift fuer Wirtschaftlichen Fabrikbetrieb; Vol. 109(12), pp. 889-8942014 
Nestler, K., Adamitzki, W., Glowa, G. and Zeidler, H.Plasma electrolytic surface treatment of copper and copper alloys,Plasma-electrolytische Oberflächenbehandlung von Kupfer und KupferlegierungenMetall; Vol. 68(11), pp. 73-932014 
Zeidler, HTHERMACO - Advanced materials: Overcoming technical challengesCECIMO Magazine, Fall 2014, Issue 9,  S. 432014 
Zhang, R.; Schubert, A.; Zeidler, H.Drallfreie Bearbeitung mittels Start-Stopp-DrehverfahrenZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb, Jahrgang 109 (2014) 12, Carl Hanser Verlag, München, ISSN: 0947-0085, S. 889-8942014 
Schubert, A.; Funke, R.; Zeidler, H.; Edelmann, J.; Steinert, P.; Zhang, R.Surface Engineering by Microstructuring Processeseuspen Topical Meeting “Structured & Freeform Surfaces”, 19.-20.11.2014, Padua, Italien2014 
Mwangi, J. W.; Ikua, B. W.; Nyakoe, G. N.; Zeidler, H.; Kabibni, S. K.Effect of Dielectric Fluid and Vibration on Performance in Electrical Discharge Machining of AlSiC Metal Matrix CompositesProceedings of the Sustainable Research and Innovation (SRI) Conference , 20142014 
Schubert, A.; Zeidler, H.; Flemmig, S.; Penzel, M.; Essel, S.: Graphene Aluminium Matrix Nano-Composites for Heat Transfer ApplicationsProceedings of the 4th International Conference on Nanomanufacturing - nanoMan2014, 20142014 
Kröning O., Herzig M., Schulze H.-P., Hackert-Oschätzchen M., Kühn R. Zeidler H., Schubert A.Resource-efficient machining of hard metalsMaterial Forming ESAFORM 2014, 2014, S. 708-714, ISBN-13: 978-3-03835-106-12014 
Zeidler H., Schubert AVerschieben der Prozessgrenzen – Hybride Abtragtechnologien in der Präzisions- und Mikrofertigung3rd International Chemnitz Manufacturing Colloquium ICMC 2014 - Proceedings Part 1, Volume 80, Chemnitz, 2014, S. 265-282, ISBN 978-3-95735-004-62014 
Schubert A., Steinert P., Kirbach M., Zhang R., Zeidler H.Energy-Efficient Finishing Technologies for Powertrain Applications3rd International Chemnitz Manufacturing Colloquium ICMC 2014 - Proceedings Part 1, Volume 80, Chemnitz, 2014, S. 105-122, ISBN 978-3-95735-004-62014 
Schubert A., Steinert P. Kirbach M., Zhang R., Zeidler H.Energy-Efficient Finishing Technologies for Powertrain Applications3rd International Chemnitz Manufacturing Colloquium ICMC 2014 - Proceedings Part 2, Volume 81, Chemnitz, 2014, S. 395-412, ISBN 978-3-95735-005-32014 
Schubert A., Kirbach M., Zeidler H.Energy Demand Calculations of Cutting Processes - Using the Example of Manufacturing Pockets3rd International Chemnitz Manufacturing Colloquium ICMC 2014 - Proceedings Part 2, Volume 81, Chemnitz, 2014, S. 851-870, ISBN 978-3-95735-004-62014 
Kröning O., Herzig M., Schulze H.-P., Hackert-Oschätzchen M., Kühn R., Zeidler H., Schubert A.Resource-efficient machining of hard metalsKey Engineering Materials; Vol. 611-612, pp. 708-7142014 
Schubert A., Zeidler H., Flemmig S., Penzel M.Simulation of the anisotropic thermal conductivity generated by graphene integration in aluminium matricesConference Proceedings - 14th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 20142014 
Schubert A., Zeidler H., Jahn S., Flemmig S., Schulze R.Vibration analysis of an ultrasonic-assisted joining systemProcedia Engineering; Vol. 69, pp. 1021-10282014 
Oschätzchen M., Martin A., Meichsner G., Kowalick M., Zeidler H., Schubert A.Inverse jet electrochemical machining for functional edge shaping of micro boresProcedia CIRP; Vol. 6, pp. 378-3832013 
Zeidler H., Martin A., Hackert-Oschätzchen M., Meichsner G., Schubert A.Jet Electrochemical Machining of Selective Laser Melted Metals for Micro Injection MouldsProceedings of the 9th International Symposium on Electrochemical Machining Technology, 2013, S. 101-1122013 
Hackert-Oschätzchen M., Kreißig M., Kowalick M., Zeidler H., Schubert A., Kröning O., Herzig M., Schulze H.-PSingle Discharge Simulations of Needle Pulses for Electrothermal AblationProceedings of the European COMSOL Conference, 2013, ISBN 978-0-9910001-5-92013 
Hackert-Oschätzchen M., Martin A., Meichsner G., Kowalick M., Zeidler H., Schubert, A.Inverse Jet Electrochemical Machining for Functional Edge Shaping of Micro BoresProcedia CIRP, 6:379-384, 2013, DOI: 10.1016/j.procir.2013.03.0602013 
Schubert A. Zeidler H., Hackert-Oschätzchen M., Schneider J., Hahn M.Enhancing Micro-EDM using Ultrasonic Vibration and Approaches for Machining of Nonconducting CeramicsStrojniški vestnik - Journal of Mechanical Engineering, 59(2013)3, S. 156-164201310.5545/sv-jme.2012.442
Schubert A., Zeidler H., Hahn M., Hackert-Oschätzchen M., Schneider J.Micro-EDM milling of electrically nonconducting zirconia ceramicsProcedia CIRP; Vol. 6, pp. 297-3022013 
Zeidler H., Hahn M., Schneider J., Hackert-Oschätzchen M., Schubert, A.Accelerated precision manufacturing through electro discharge machining with ultrasonic vibration assistance29th DANUBlA-ADRIA Symposium on Advances in Experimental Mechanics, DAS 2012, pp. 56-572012 
Hackert-Oschätzchen M., Meichsner G., Martin A., Zeidler H., Schubert, A.Fast micromilling with jet electrochemical machining29th DANUBlA-ADRIA Symposium on Advances in Experimental Mechanics, DAS 2012, pp. 54-552012 
Schubert A., Meichsner G., Hackert-Oschätzchen M., Zeidler, H.Functional edge shaping of micro bores by applying Electrochemical MachiningProceedings of the 12th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2012; Vol. 2, pp. 420-4232012 
Schubert A., Zinecker M., Hackert-Oschätzchen M., Zeidler H., Edelmann, J.Micro Structured Surfaces for Thermodynamics Applications, euspen Topical Meeting: Structured & Freeform Surfaces, Teddington UK, 05.-06.12.20122012 
Schubert A., Zeidler H., Meyer W., Unger M., Hackert-Oschätzchen M.Edge rounding of EDM micro bores using a plasma electrolytic polishing processProceedings of the 8th International Symposium on Electrochemical Machining Technology, 2012, Editor: M. Zybura-Skrabalak, ISBN 978-83-931339-5-6, S. 161-1682012 
Hackert-Oschätzchen M., Meichsner G., Martin A, Zeidler H., Schubert A.Fast Micromilling with Jet Electrochemical MachiningProceedings of the 29th Danubia-Adria Symposium, 2012, ISBN 978-86-7083-762-12012 
Schubert A., Zhang R., Steinert, P. Zeidler H., Kirbach M.Energieeffiziente Herstellung von Powertrain-Komponenten in der Automobil- und ZulieferindustrieTagungsband MIW 2012, S. 50-56, ISBN: 978-3-9815433-0-82012 
Zeidler H. Vibration Assisted Micro Spark Erosion( Vol. 4 ), pp. 180 pp.2012 
Zeidler H.Schwingungsunterstützte Mikro-Funkenerosion (Dissertation)Schubert, A. (Hrsg.): Scripts Precision and Microproduction Engineering, Band 4. Verlag Wissenschaftliche Scripten, 2012 - ISBN 978-3-942267-44-1.2012 
Schubert A., Zeidler H., Wolf N., Hackert-Oschätzchen M., Schneider, J.Ultrasonic-assisted micro-EDM of deep bores: Process and discharge analysisProceedings of the 12th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2012; Vol. 2, pp. 391-3942012 
Zeidler H., Hahn M., Schneider J., Hackert-Oschätzchen M., Schubert, A.Accelerated Precision Manufacturing through Electro Discharge Machining with Ultrasonic Vibration AssistanceProceedings of the 29th Danubia-Adria Symposium, 2012, ISBN 978-86-7083-762-12012 
Garn R., Schubert A., Zeidler H.Analysis of the effect of vibrations on the micro-EDM process at the workpiece surfacePrecision Engineering; Vol. 35(2), pp. 364-3682011 
Schubert A., Wolf N., Zeidler, H., Schneider J.Indirect approach to ultrasonic superposition in micro-EDMASME 2011 International Manufacturing Science and Engineering Conference, MSEC 2011; Vol. 1, pp. 427-4342011 
Schubert A., Nestler A., Pinternagel S., Zeidler H.Influence of ultrasonic vibration assistance on the surface integrity in turning of the aluminium alloy AA2017Materialwissenschaft und Werkstofftechnik; Vol. 42(7), pp. 658-6652011 
Schubert A., Wolf N. and Zeidler H.Micro - EDM: Process effects on the tool wear ratioProceedings of the 11th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2011; Vol. 2, pp. 546-5492011 
Schubert A., Zeidler H., Wolf N., Hackert M.Micro electro discharge machining of electrically nonconductive ceramicsAIP Conference Proceedings; Vol. 1353, pp. 1303-13082011 
Schubert A., Edelmann J., Gross S., Zeidler H., Meichsner G., Hackert M., Wolf N., Schneider, J. Micromanufacturing Of Hard To Machine Materials By Physical And Chemical Ablation ProcessesAIP Conference Proceedings of the International Conference on Advances in Materials and Processing Technologies (AMPT 2010), 17 January 2011, Volume 1315, S.1279-12842011 
Hackert-Oschätzchen M., Meichsner G., Zeidler H., Zinecker M., Schubert, A.Micro machining of different steels with closed electrolytic free jetAIP Conference Proceedings; Vol. 1353, pp. 1337-13432011 
Schubert A., Zeidler H.Micro-Electro Discharge Machining Process Optimization by Integration of Measurement, Actuation and FlushingKennel, T. (ed.): Proceedings of the 12th Mechatronics Forum Biennial International Conference 20102010ISBN 978-3-033-02507-3
Schubert A., Zeidler H.Implementation of micro-EDM process for machining of nonconductive ceramics16th International Symposium on Electromachining, ISEM 2010, pp. 565-5692010 
Schubert A., Edelmann J., Gross S., Zeidler H., Meichsner G., Hackert M., Wolf N., Schneider, J.Micromanufacturing of hard to machine materials by physical and chemical ablation processesAIP Conference Proceedings; Vol. 1315, pp. 1279-12842010 
Schubert A., Zeidler H.Machining of nonconductive ZrO2 ceramics with micro-EDMProceedings of the 9th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2009; Vol. 2, pp. 6-92009 
Schubert A., Zeidler H.A novel approach to efficiency determination in micro electro discharge machiningProceedings of the 10th Anniversary International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2008; Vol. 2, pp. 488-4922008 
Leech P., Zeidler H.Microrelief structures for anti-counterfeiting applicationsMicroelectronic Engineering; Vol. 65(4), pp. 439-4462003 
Leech P., Zeidler H.Fabrication of micro-relief structures in thick resist for anti-counterfeiting applicationsMaterials Research Society Symposium - Proceedings; Vol. 741, pp. 73-782002