Veröffentlichungen | TU Bergakademie Freiberg

Burkert J, Schwarze R:
Analysis of Surface Behavior and Cavity Oscillations in a Liquid Metal Model Experiment of the Basic Oxygen Furnace Process
steel research int. 2300184 (2024)
DOI: 10.1002/srin.202300184

Kasper T, Finster M, Schwarze R:
Phenomenological Study of the Atomization Process in Pre-Filming Nozzles Typically Used for Steel Atomization
steel research int. 2300138 (2024)
DOI: http://dx.doi.org/10.1002/srin.202400138

Adam J, Heinrich M, Schwarze R:
Design of Experiment on the Influence of Channel Design onto Regenerative Compressor Performance
15th European Conference on Turbomachinery Fluid Dynamics and Thermodynamics 2023, ETC 2023, Budapest

Finster M, Chaves H, Schwarze R:
Numerical simulation of the accumulation process in modulated liquid jets of defined volume using the volume-of-fluid methodology
International Journal of Multiphase Flow 160, (2023) 104356
DOI: 10.1016/j.ijmultiphaseflow.2022.104356

Fritzsche L, Heinrich M, Gupta K, Schwarze R, Bauer K:
Experimental and numerical investigation of the aerosol generation mechanisms at the human vocal folds
32nd Conference on Liquid Atomization & Spray Systems (ILASS Europe 2023), 4-7 Sept 2023, Napoli, Italy

Hardege R, Rockstroh T, Bauer K, Schwarze R:
Non-invasive calibration for volumetric flow measurements in confined spaces
Experiments in Fluids Volume 64 (2023)
DOI: 10.1007/s00348-023-03729-1

Heinrich M, Voisiat B, Lasagni A F, Schwarze R:
Numerical simulation of periodic surface structures created by direct laser interference patterning
PLoS ONE 18 (2023)
DOI: 10.1371/journal.pone.0282266

Kluwe M, Hardege R, Schwarze R:
Four-dimensional flow field near a sphere settling in Newtonian fluid
Physics of Fluids 35, 123341 (2023)
DOI: 10.1063/5.0177240

Schwarz J, Axelsson K, Anheuer D, Richter M, Adam J, Heinrich M, Schwarze R:
An OpenFOAM solver for the extended Navier-Stokes equations
SoftwareX 22, 101378 (2023)
DOI: 10.1016/j.softx.2023.101378

Weli R B, Atrooshi S A, Schwarze R:
Design characteristics and validation of the turbine model—Case of development of turbine effect in sloped collector solar chimney plant
Energy Reports 9 (2023)
DOI: 10.1016/j.egyr.2023.01.031

Adam J, Heinrich M, Schwarze R:
Influence of different design parameters on side channel compressor performance
Forschung im Ingenieurwesen (2022)
DOI: 10.1007/s10010-022-00594-y

Bano T, Burkert J, Schwarze R:
An experimental study to investigate the response of a flexible flap interacting with a fluid flow
29. Fachtagung Experimentelle Strömungsmechanik, 6.-8. September 2022, Ilmenau

Bauer K, Janke T, Schwarze R:
Oxygen transport during liquid ventilation: an in vitro study
Scientific Reports, 1244 (2022)
DOI: 10.1038/s41598-022-05105-1

Bauer K, Hardege R, Neumann S, Schwarze R, Fuchs M, Pieper L H:
How Safe is Singing Under Pandemic Conditions? - CO₂-Measurements as Simple Method for Risk Estimation During Choir Rehearsals
Journal of Voice, in press
DOI: 10.1016/j.jvoice.2022.05.003

Burkert J, Schwarze R:
Determination of the degree of filtration for fabric filters in air flows by means of laser-optical setup
29. Fachtagung Experimentelle Strömungsmechanik, 6.-8. September 2022, Ilmenau

Burkert J, Schwarze R:
A new experimental setup for time-resolved measurements of interactions between gas jets and ﬂexible surfaces
Measurement Science Technology (2022)
DOI: 10.1088/1361-6501/ac86e4

Eichinger S, Storch T, Grab T, Tepel S, Heinrich M, Fieback T, Groß U:
Heat transfer and wetting behaviour of falling liquid films in inclined tubes with structured surfaces
Applied Thermal Engineering, 205 (2022) 118023
DOI: 10.1016/j.applthermaleng.2021.118023

Fritzsche L, Schwarze R, Junghans F, Bauer K:
Toward unraveling the mechanisms of aerosol generation during phonation
Physics of Fluids 34, (2022) 121904
DOI: 10.1063/5.0124944

Hardege R, Rockstroh T, Burkert J, Schwarze R, Bauer K:
Non-invasive Laser-Cross Calibration for Volumetric Flow Measurements in Closed Channels
In: Proceedings of the 20th International Symposium on Applications of Laser and Imaging Techniques to Fluid Mechanics, S. 2579-2593, LXLASER 2022, Lisbon, Portugal, 11-14 July 2022

Haustein M A, Eslami Pirharati M, Fataei S, Ivanov D, Jara Heredia D, Kijanski N, Lowke D, Mechtcherine V, Rostan D, Schäfer T, Schilde C, Steeb H, Schwarze R:
Benchmark Simulations of Dense Suspensions Flow Using Computational Fluid Dynamics
Front. Mater. 2022, 9, 874144.
DOI: 10.3389/fmats.2022.874144

Kluwe M N, Haustein A H, Schwarze R:
Optical investigation of dense suspensions with non-Newtonian matrix under pulsating pumping
Journal of Non-Newtonian Fluid Mechanics, Volume 303, (Mai 2022) 104778
DOI: 10.1016/j.jnnfm.2022.104778

Reiswich A, Heinrich M, Finster M, Schwarze R:
Stereo vision investigation of elastic flap kinematics in separated flow
Journal of Fluids and Structures 114 (2022) 103711
DOI: 10.1016/j.jfluidstructs.2022.103711

Schwarze R, Junghans F, Bauer K:
Toward unraveling the mechanisms of aerosol generation during phonation
Physics of Fluids 34 (2022) 121904
DOI: 10.1063/5.0124944

Asad A, Schwarze R:
Numerical Modeling of Reactive Cleaning of Steel Melt in an Induction Crucible Furnace
GAMM 2021 - 91th Annual Meeting of the International Association of Applied Mathematics and Mechanics 15.-19.03.2021, Kassel/Germany

Asad A, Schwarze R:
Numerical Investigation of the Combined Effect of Reactive Cleaning and Active Filtration on Inclusion Removal in an Induction Crucible Furnace
steel research international, 92 (2021) 2100122
DOI: 10.1002/srin.202100122

Asad A, Lehmann H, Jung B, Schwarze R:
Numerical Assessment of the Immersion Process of a Ceramic Foam Filter in a Steel Melt
Advanced Engineering Materials, 2100753
DOI: 10.1002/adem.202100753

Bauer K, Janke Th, Schwarze R:
Variations of Oscillating Flow in the Upper Bronchial Tree
ICTAM Milano 2020+1, 25th International Congress of Theoretical and Applied Mechanics, 22-27 August 2021, Milano, Italy

Bauer K, Burkert J, Schwarze R:
Emerging structures of low turbulent flow in a 90° pipe bend
ETMM 13, 13th International ERCOFTAC symposium on Engineering, Turbulence, Modelling and Measurements, 15 - 17 Sep 2021, Rhodes, Greece

Burkert J, Schwarze R:
A new liquid metal experiment to investigate surface wave behaviour in a BOF converter
28. Fachtagung Experimentelle Strömungsmechanik, 7.-9. September 2021, Bremen

Ceyrowsky T, Hildebrandt A, Heinrich M, Schwarze R:
Assessment of the Loss Map of a Centrifugal Compressor's External Volute
Journal of Turbomachinery, 143 (2021) 091020
DOI: 10.1115/1.4050387

Gladky A, Lieberwirth H, Lampke J, Schwarze R:
Numerical Modeling of Bulk Flow on a Pelletizing Disc in Different Rotational Regimes
Granular Matter, 23 (2021) 66
DOI: 10.1007/s10035-021-01121-6

Haustein M:
Beitrag zur Untersuchung von Partikelinteraktionen in Suspensionen am Beispiel von Stahl und Beton
Dissertation, 2021

Janke T:
Hydrodynamical Investigations of liquid Ventilation by means of advanced optical Measurement Techniques
Dissertation, 2021
https://nbn-resolving.org/urn:nbn:de:bsz:105-qucosa2-754061

Sommerfeld M, Sgrott Jr OL, Taborda MA, Koullapis P, Bauer K:
Analysis of flow field and turbulence predictions in a lung model applying RANS and implications for particle deposition European Journal of Pharmaceutical Sciences 166 (2021) 105959
DOI: 10.1016/j.ejps.2021.105959

Spitzenberger A, Neumann S, Schwarze R:
Evaluation of Lagrangian Particle Information from VOF Simulation Data
GAMM 2021 - 91th Annual Meeting of the International Association of Applied Mathematics and Mechanics 15.-19.03.2021, Kassel/Germany

Weli R B, Atrooshi S A, Schwarze R:
Investigation of the Performance Parameters of a Sloped Collector Solar Chimney Model – An Adaptation for the North of Iraq
Renewable Energy, 176 (2021) 504–519.
DOI: 10.1016/j.renene.2021.05.075

Asad A, Aneziris C G, Schwarze R:
Numerical Investigation of Filtration Influenced by Microscale CO Bubbles in Steel Melt
Advanced Engineering Materials, 22 (2020) 1900591.
DOI: 10.1002/adem.201900591

Asad A:
Numerical and Experimental Investigation of Particle Separation and Flow Behavior Inside an Induction Crucible Furnace
Dissertation, 2020

Asgarian A, Heinrich M, Schwarze R, Bussmann M, Chattopadhyay K:
Experiments and modeling of the breakup mechanisms of an attenuating liquid sheet
International Journal of Multiphase Flow, 130 (2020) 103347.
DOI: 10.1016/j.ijmultiphaseflow.2020.103347

Auernhammer G K, Fataei S, Haustein M A, Patel H P, Schwarze R, Secrieru E, Mechtcherine V:
Transparent model concrete with tunable rheology for investigating flow and particle-migration during transport in pipes
Materials & Design (2020) 108673.
DOI: 10.1016/j.matdes.2020.108673

Bano T, Hegner F, Heinrich M, Schwarze R:
Investigation of Fluid-Structure Interaction Induced Bending for Elastic Flaps in a Cross Flow
Applied Sciences 10.18 (2020) 6177.
DOI: 10.3390/app10186177

Borrmann S, Neumann S, Schwarze R:
CFD Analysis of the Particle and Melt Flow Behavior During Fabrication and Processing of TRIP-Matrix-Composites
In: Biermann H, Anziris CG, eds.: Austenitic TRIP/TWIP Steels and Steel-Zirconia Composites. Cham: Springer Nature Switzerland AG (2020) 585-619.
DOI: 10.1007/978-3-030-42603-3

Ceyrowsky T, Hildebrandt A, Heinrich M, Schwarze R:
Assessment of the loss map of a centrifugal compressor’s external volute
Proceedings of the ASME Turbo Expo, 2020, 2E-2020
DOI: 10.1115/GT2020-14291

Greifzu F:
Beitrag zur Analyse partikelbeladener Sichterströmungen mithilfe von CFD
Dissertation, 2020

Haustein M, Kluwe M N, Schwarze R:
Experimental Investigation of the Pumping of a Model-Concrete through Pipes
Materials, 13 (2020) 1161.
DOI: 10.3390/ma13051161

Haustein M, Schwarze R:
Segregation of Granular Material during the Transport in Pipes – Experimental investigation of the particle flow in pipes
In: Mechtcherine V., Khayat K., Secrieru E. (eds) Rheology and Processing of Construction Materials. RheoCon 2019, SCC 2019. RILEM Bookseries, Springer, Cham 23 (2020) 596-161.
DOI: 10.1007/978-3-030-22566-7_69

Heinrich M, Khaleghi H, Friebe C:
Effect of Cirumferentail Casing Treatment on Low-Speed Contra-Rotating Fans
Journal of Applied Fluid Mechanics, 13 (2020) 1719-1726.
DOI: 10.47176/jafm.13.06.31492

Heinrich M, Schwarze R:
3D-coupling of Volume-of-Fluid and Lagrangian particle tracking for spray atomization simulation in OpenFOAM
SoftwareX, 11 (2020) 100483.
DOI: 10.1016/j.softx.2020.100483

Janke T, Schwarze R, Bauer K:
Part2Track: A MATLAB package for double frame and time resolved Particle Tracking Velocimetry
SoftwareX, 11 (2020) 100413.
DOI: 10.1016/j.softx.2020.100413

Khaleghi H, Shahriyari M J, Heinrich M:
A theory for rotating stall in contra-rotating fans
Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 2020
DOI: 10.1177/0954406220962538

Neumann S, Asad A, Schwarze R:
Numerical Simulation of an Industrial Scale Prototypical Steel Melt Tundish considering Flow Control and Cleaning Strategies
Advanced Engineering Materials 22 (2020) 1900658
DOI: 10.1002/adem.201900658

Reiswich A, Finster M, Heinrich M, Schwarze R:
Effect of Flexible Flaps on Lift and Drag of Laminar Profile Flow
Energies 2020, 13 (2020) 1077.
DOI: 10.3390/en13051077

Schwarze R, Bräuer A:
Teilchen-"Filterblasen": Neues Erkennungs- und Abscheideverfahren für Mikroplastik
Laborpraxis (2020), Heft 2, S.18

Schwarze R, Blanke A L, Müller-Blanke N, Köhler H P, Bräuer A S:
Filterfreies Abscheideverfahren für Mikroplastik
wasserwirtschaft wassertechnik (2020) Heft 4, S. 14

Spitzenberger A, Neumann S, Heinrich M, Schwarze R:
Particle detection in VOF-simulations with OpenFOAM
SoftwareX, 11 (2020) 100382.
DOI: 10.1016/j.softx.2019.100382

Borrmann S, Schwarze R:
A CFD model for simulating the electron beam welding of TRIP-Matrix-Composites
GAMM 2019 - 90th Annual Meeting of the International Association of Applied Mathematics and Mechanics 18.-22.02.2019, Wien/Österreich
DOI: 10.1002/pamm.201900249

Borrmann S, Schwarze R:
A CFD model for electron beam welding of CrMnNi-steels
The 8th International Conference on Modeling and Simulation of Metallurgical Processes in Steelmaking (STEELSIM), 15.-18.08.2019,Toronto/Kanada

Borrmann S, Kratzsch C, Halbauer L, Buchwalder A, Biermann H, Saenko I, Chattopadhyay K, Schwarze R:
Electron beam welding of CrMnNi-steels: CFD-modeling with temperature sensitive thermophysical properties
International Journal of Heat and Mass Transfer, 139 (2019) 442-455.
DOI: 10.1016/j.ijheatmasstransfer.2019.04.125

Borrmann S, Asad A, Halbauer L, Buchwalder A, Biermann H, Schwarze R:
Numerical Simulation of the Particle Displacement during Electron Beam Welding of a Dissimilar Weld Joint with TRIP-Matrix-Composite
Advanced Engineering Materials, 21 (2019) 1800741.
DOI: 10.1002/adem.201800741

Burkert J, Schwarze R, Bauer K:
Transitional flow in a 90° pipe bend
13th International Symposium on Particle Image Velocimetry, 22.-24.07.2019, München
DOI: 10.18726/2019_3

Chaves H:
Inert Gas Metal Atomization Using a Laval Nozzle, Preheated Gas and Radial Melt Injection
ILASS–Europe 2019, 29th Conference on Liquid Atomization and Spray Systems, 2.-4.9.2019, Paris/Frankreich

Chaves H:
A New Method for the Inert Gas Atomization of Metals and Melts
Euro PM2019 Congress & Exhibition, 13.-16.10.2019, Maastricht/Niederlande

Haustein M, Schwarze R:
Segregation of Granular Material during the Transport in Pipes – Experimental investigation of the particle flow in pipes
2nd International RILEM Conference - Rheology and Processing of Construction Materials (RheoCon2), 08.-11.09.2019, Dresden

Haustein M, Schwarze R:
Size Segregation of Particles during a Pumping Process: A DEM Study
Particles 2019, 28.-30.10.2019, Barcelona/Spanien

Haustein M, Zhang G, Schwarze R:
Segregation of granular materials in a pulsating pumping regime
Granular Matter, 21 (2019) 111.
DOI: 10.1007/s10035-019-0967-6

Heinrich M, Khaleghi H, Friebe C:
Numerical Investigation of Circumferential Groove Casing Treatment on a Low Speed Contra-Rotating Fan
ASME Turbo Expo 2019: Power for Land, Sea and Air, 17.-21.06.2019, Phoenix/Arizona
DOI: 10.1115/GT2019-91705

Janke Th, Chaves H, Schwarze R, Bauer K:
Correlation velocimetry for the measurement of turbulent signals in the human airways
Fachtagung “Experimentelle Strömungsmechanik", 03.-05.09.2019, Erlangen

Janke Th, Koullapis P, Kassinos S C, Bauer K:
PIV measurements of the SimInhale benchmark case
European Journal of Pharmaceutical Sciences, 113 (2019) 183-189.
DOI: 10.1016/j.ejps.2019.03.025

Janke Th, Schwarze R, Bauer K:
PIV-PTV comparison of the oscillating flow inside the human lungs
ISPIV 2019 International Symposium on Particle Image Velocimetry, 22.-24.07.2019, München
DOI: 10.18726/2019_3

Kasper T, Schwarze R:
Effect of a Rotating Magnetic Field on the Decay of a Free-Falling Metal Jet
GAMM 2019 - 90th Annual Meeting of the International Association of Applied Mathematics and Mechanics, 18.-22.02.2019, Wien/Österreich

Kasper T, Schwarze R:
Effect of a rotating magnetic field on the decay of a free‐falling metal jet
PAMM Volume 19, Issue 1
DOI: 10.1002/pamm.201900066

Neumann S:
Inclusion Removal in Tundish Metal Melt Flows using Active Filtration and Reactive Cleaning Contribution
Simscience 2019, 08.-10.05.2019, Clausthal-Zellerfeld

Neumann S, Asad A, Kasper T, Schwarze R:
Numerical Simulation of Melt Flow in a One-Strand Tundish Regarding Active Filtration and Reactive Cleaning
Metallurgical and Materials Transactions B, 50 (2019) 2334–2342.
DOI: 10.1007/s11663-019-01637-6

Ostmann S, Finster M, Schwarze R:
Experimental investigation on bubble chains with varying bubble frequencies and narrow size distributions using a Shadow-PIV setup
ISPIV 2019 International Symposium on Particle Image Velocimetry, 22.-24.07.2019, München
DOI: 10.18726/2019_3

Schwarze R:
Computational Rheology of Concrete
Rheologentagung 2019, 26.-27.02.2019, Berlin

Shahriyari M J, Khaleghi H, Heinrich M:
A Model for Stall and Surge in Low-Speed Contra-Rotating Fans
Journal of Engineering for Gas Turbines and Power, 141 (2019) 081009.
DOI: 10.1115/1.4043251

Asad A, Chattopadhyay K, Schwarze R:
Effect of Turbulence Modeling on the Melt Flow and Inclusions Transport in a Steel Filtration Experiment
Metallurgical and Materials Transactions B, 49 (2018) 2270-2277.
DOI: 10.1007/s11663-018-1343-3

Asad A, Bauer K, Chattopadhyay K, Schwarze R:
Numerical and Experimental Modeling of the Recirculating Melt Flow Inside an Induction Crucible Furnace
Metallurgical and Materials Transactions B, 49 (2018) 1378-1387.
DOI: 10.1007/s11663-018-1200-4

Asad A, Schwarze, R:
Effect of Micro-Scale Gas Bubbles on Steel Filtration: a Numerical Study
73WFC: 73rd World Foundry Congress,Krakow, Poland, 23 – 27 September 2018

Asad A, Haustein M, Chattopadhyay K, Aneziris C, Schwarze R:
Numerical Assessment of a Filtration Experiment Influenced by Microscale Carbon Monoxide Bubbles Arising in Steel Melt
JOM, 70 (2018) 2927-2933.
DOI: 10.1007/s11837-018-3117-4

Asgarian A, Heinrich M, Chattopadhyay K, Bussmann M:
Computational Modelling Of Water Sprays In Molten Metal Atomization Process
Euro PM2018 Congress & Exhibition, 14.-18.10.2018, Bilbao/Spanien

Borrmann S, Schwarze, R:
Simulating the Heat and Fluid Flow during Electron Beam Welding of CrMnNi Steels
ECCM-ECFD2018: 7th European Conference on Computational Fluid Dynamics, Glasgow, UK, 11 – 15 June 2018

Chaves H:
Cavitation and Bubble Collapse Produced by Fast Liquid Jets
LXLASER2018: 19th International Symposium on Applications of Laser and Imaging Techniques to Fluid Mechanics, Lisbon, Portugal, 16 – 19 July 2018

Chaves H, Menne A:
Observation of Focused Shock Waves Used for Orthopaedic Therapy
ISFV18: 18th International Symposium on Flow Visualization, Zurich, Switzerland, 26 – 29 June 2018

Ceyrowsky T, Hildebrandt A, Schwarze R:
Numerical investigations of the circumferential pressure distortion induced by a centrifugal compressor's external volute
ASME Turbo Expo 2018, Lillehammer, Norwegen, 11. - 15. Juni 2018

Haustein M, Asad A, Schwarze R:
Collision of micro-sized non-metallic inclusions in liquid steel flows - a computational study
JOM, 70 (2018) 2943-2949.
DOI: 10.1007/s11837-018-3113-8

Heinrich M, Schwarze R:
Volute Shape Optimization Using Evolutionary Algorithms
ECCM-ECFD2018: 7th European Conference on Computational Fluid Dynamics, Glasgow, UK, 11 – 15 June 2018

Hennig J:
Virtuelle Prototypen für Lamellenventile in Pkw-Kältemittelverdichtern
Dissertation, 2018
elektronische Version

Hennig J, Schwarze R, Heinrich M:
3D FSI Simulation, Validation and Model Reduction for Reed Valves in Automotive Refrigerant Compressor
NAFEMS European Conference on Multiphysics Simulation, 11.-12.10.2018, Budapest/Ungarn

Janke T, Schwarze R, Bauer K:
Qualitative in vitro measurements of dissolved oxygen concentrations in perfluorocarbon during liquid ventilation
ISFV18: 18th International Symposium on Flow Visualization, Zurich, Switzerland, 26 – 29 June 2018
DOI: 10.3929/ethz-b-000279237

Kasper T, Schwarze R:
Rotating Magnetic Field - Influence on the decay of a free falling jet
International Forum-Contest of Young Researchers „Topical Issues of Rational use of Natural Resources“: St. Petersburg, Russia, 18 – 20 April 2018

Kasper T, Schwarze R:
Liquid Steel Atomization
"OpenFOAM Stammtisch United", Helmholtz Zentrum Dresden Rossendorf, 25.-26. Mai 2018

Kratzsch C:
Liquid Metal Flow in Continuous Casting Molds: A Numerical Approach of Electromagnetic Flow Control, Turbulence and Multiphase Phenomena
Dissertation, 2018

Mandal S, Turek S, Schwarze R, Haustein M, Ouazzi A, Gladky A:
Numerical benchmarking of granular flow with shear dependent incompressible flow models
Journal of Non-Newtonian Fluid Mechanics, 262 (2018) 92-106.
DOI: 10.1016/j.jnnfm.2018.03.015

Ostmann S, Schwarze R:
A Compact Device for the Deterministic Generation of Medium-Sized Bubbles
Review of Scientific Instruments, 89 (2018) 125108.
DOI: 10.1063/1.5048708

Asad A, Kratzsch C, Schwarze R:
Influence of drag closures and inlet conditions on bubble dynamics and flow behaviour inside a bubble column
Engineering Applications of Computational Fluid Mechanics, 11 (2017) 127-141.
DOI: 10.1080/19942060.2016.1249410

Asad A, Werzner E, Demuth C, Dudczig S, Schmidt A, Ray S, Aneziris C G, Schwarze R:
Numerical Modeling of Flow Conditions during Steel Filtration Experiments
Advanced Engineering Materials, 19 (2017) 1700085.
DOI: 10.1002/adem.201700085

Bauer K, Nof E, Sznitman J:
Revisiting high-frequency oscillatory ventilation in vitro and in silico in neonatal conductive airways
Clinical Biomechanics, 66 (2017) 50-59.
DOI: 10.1016/j.clinbiomech.2017.11.009

Chatterjee S, Asad A, Kratzsch C, Schwarze R, Chattopadhyay K:
Mixing and Residence Time Distribution in an Inert Gas-Shrouded Tundish
Metallurgical and Materials Transactions B 48 (2017) 17-21.
DOI: 10.1007/s11663-016-0867-7

Haustein M, Gladkyy A, Schwarze R:
Discrete Element Modelling of deformable particles in YADE
in SoftwareX, 6 (2017) 118-123.
DOI: 10.1016/j.softx.2017.05.001

Haustein M, Gladkyy A, Schwarze R:
Implementation and Verification of an Algorithm for Deformable Discrete Particles in the YADE DEM Software
Beitrag zur Particles 2017, Hannover

Heinrich M, Schwarze R:
Influence of volute channel position onto centrifugal compressor performance
ETC12: 12th European Turbomachinery Conference, Stockholm, Schweden, 3. - 7. April 2017

Janke T, Bauer K:
Visualizing dissolved oxygen transport for liquid ventilation in an in vitro model of the human airways
Measurement Science and Technology, 28 (2017) 055701.
DOI: 10.1088/1361-6501/aa60aa

Janke T, Schwarze R, Bauer K:
Measuring three-dimensional flow structures in the conductive airways using 3D-PTV
Experiments in Fluids, 58 (2017) 133.
DOI: 10.1007/s00348-017-2407-x

Janke T, Schwarze R, Bauer K:
Curvature and torsion of particle trajectories within a model of the human conductive airways
Fachtagung “Experimentelle Strömungsmechanik”, Karlsruhe, Deutschland, 5.-7. September 2017

Janke T, Lizal F, Belka M, Jedelsky J, Jicha M, Bauer K:
Experimental data for validation of particle transport simulations in human lung
European Aerosol Conference, Zürich, Schweiz, August 2017

Kratzsch C, Asad A, Chattopadhyay K, Schwarze R:
Comparative evaluation of electromagnetic breaking on fluid flow and turbulence between a reduced-scale liquid metal mold and a full-scale industrial mold AISTech
Iron and Steel Technology Conference, Nashville, USA, 8. - 11.05.2017

Li D, Chattopadhyay K, Gao L, Davis B, Schwarze R, Asad A, Kratzsch C:
Mathematical Modeling of Molten Salt Electrolytic Cells for Sodium and Lithium Production
In: Applications of Process Engineering Principles in Materials Processing, Energy and Environmental Technologies, Springer International Publishing, 2017
DOI: 10.1007/978-3-319-51091-0_11

Lizal F, Jedelsky J, Morgan K, Bauer K, Llop J, Cossio U, Kassinos St, Verbanck S, Ruiz-Cabello J, Santos A, Koch E, Schnabel Ch:
Experimental methods for flow and aerosol measurements in human airways and their replicas
European Journal of Pharmaceutical Sciences, Vol. 133, pp 95-131
DOI: 10.1016/j.ejps.2017.08.021

Timmel K, Kratzsch C, Asad A, Schurmann D, Schwarze R, Echert S:
Experimental and numerical modeling of fluid flow processes in continuous casting: results from the LIMMCAST-project
IOP Conference Series: Materials Science and Engineering 228 (2017) 012019

Asad A, Kratzsch C, Dudczig S, Aneziris C.G., Schwarze R:
Numerical study of particle filtration in an induction crucible furnace
International Journal of Heat and Fluid Flow, 62 (2016) 299-312.
DOI: 10.1016/j.ijheatfluidflow.2016.10.002

Asad A, Kratzsch C, Schwarze R:
Numerical Investigation of the Free Surface in a Model Mold
steel research international, 87 (2016) 181-190.
DOI: 10.1002/srin.201400600

Bauer K:
Flow characteristics in the upper bronchial airways during Normal Ventilation and High Frequency Oscillatory Ventilation (HFOV)
Faculty of Biomedical Engineering, Technion, Israel Institue of Technology, 3rd April, 2016, *invited Seminar

Greifzu F, Kratzsch C, Forgber T, Lindner F, Schwarze R:
Assessment of particle-tracking models for dispersed particle-laden flows implemented in OpenFOAM and ANSYS FLUENT
Engineering Applications of Computational Fluid Mechanics, 10 (2016) 30-43.
DOI: 10.1080/19942060.2015.1104266

Heinrich M:
Genetic Optimization of Turbomachinery Components using the Volute of a Transonic Centrifugal Compressor as a Case Study
Dissertation, 2016
elektronische Version

Heinrich M, Friebe C, Schwarze R:
Experimental and numerical investigation of a gearless one-motor contra-rotating fan
Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 230 (2016) 467-476.
DOI: 10.1177/0957650916633014

Heinrich M, Schwarze R:
Density-Based Solver for All Mach Number Flows
Progress in Computational Fluid Dynamics, 16 (2016) 271-280.
DOI: 10.1504/PCFD.2016.078752

Heinrich M, Schwarze R:
Genetic Algorithm Optimization of the Volute Shape of a Centrifugal Compressor
International Journal of Rotating Machinery (2016) 4849025.
DOI: 10.1155/2016/4849025

Janke, T, Bauer, K:
Development of a 3D-PTV algorithm for the investigation of turbulent flow structures in the upper human bronchial tree, 18th Int. Symp. on Applications of Laser Techniques to Fluid Mechanics Lisbon, Portugal, 4th-7th July, 2016

Kratzsch C, Asad A, Schwarze, R:
Comparison of different Methods to model Transient Turbulent Magnetohydrodynamic Flow in Continuous Casting Molds
IOP Conference Series: Materials Science and Engineering 143 (2016) 012025.
DOI: 10.1088/1757-899X/143/1/012025

Neumann, S.; Dubberstein, T.; Chaves, H.; Kirmse, C. & Schwarze, R:
Influencing Parameter Study on Primary Breakup of Free Falling Steel Melt Jets Using Volume of Fluid Simulation
Steel Research International, 87 (2016) 1002-1013.
DOI: 10.1002/srin.201500338

Asad A, Kratzsch C, Schwarze R:
Application of the Discrete Phase Model in Metallurgical Processes
14th Workshop on Two-Phase Flow Predictions, Halle (Saale), 2015

Asad A, Kratzsch C, Schwarze R:
Numerical Study of the Fluid Flow and the Free Surface Behavior in a Model Mold
6. International Conference on Simulation and Modelling of Metallurgical Processes in Steelmaking, Bardolino, 2015

Bauer K, Brücker C.:
The Influence of Airway Tree Geometry and Ventilation Frequency on Airflow Distribution
J Biomech Eng. 2015, 137(8)
DOI: 10.1115/1.4030621

Bauer K, Brücker C.:
Flow characteristics of the upper human lung airways
CFD in Medicine & Biology II, 30 August-8 July 2015, Albufeira, Portugal

Borrmann S, Gladkyy A, Schwarze R:
Fluid-Solid-Interaction Simulations with the WCSPH Method in the Software Package Yade
14th Workshop on Two-Phase Flow Predictions, Halle (Saale), 2015

Borrmann S, Gladkyy A, Schwarze R:
Computational Fluid Dynamics (CFD) Simulations with Particles by means of the Smoothed Particle Hydrodynamics Method - Impact on a free Liquid Surface
Particle Simulation 2015, Erlangen, 2015

Brücker C, Kirmse C, Triep M:
Feedback of the Glottal Jet Flow with Supraglottal Wall Oscillations
Aug 2015, Acta Acustica united with Acustica, Volume 102, Issue 2, March-April 2016, Pages 240-243
DOI: 10.3813/AAA.918940

Dubberstein T, Heller HP, Klostermann J, Schwarze R, Brillo J:
Surface Tension and Density Data for Fe-Cr-Mo, Fe-Cr-Ni and Fe-Cr-Mn-Ni Steels
Journal of Material Science 50 (2015) 7227-7237
DOI: 10.1007/s10853-015-9277-5

Gladkyy A, Lieberwirth H, Schwarze R:
DEM Simulation of the Dry and Weakly Wetted Bulk Flow on a Pelletizing Table
13th U.S. National Congress on Computational Mechanics, San Diego, 2015

Gladkyy A, Lieberwirth H, Schwarze R:
Bulk Flow DEM Simulation on a Pelletizing Table
Particle Simulation 2015, Erlangen, 2015

Gladkyy A, Roy S, Weinhart T, Luding S, Schwarze R:
DEM Simulations of Weakly Wetted Granular Materials: Implementation of Capillary Bridge Models
IV International Conference on Particle-Based Methods, Barcelona, 2015

Greifzu F, Schwarze R:
Simulation of Disperse Particle-Laden Gas Flows with OpenFOAM and ANSYS FLUENT
14th Workshop on Two-Phase Flow Predictions, Halle (Saale), 2015

Haubold D, Schwarze R:
Numerical Simulation of Particle Injection into a Falling Molten Steel Jet
METEC & 2nd European Steel Technology and Application Days (ESTAD) 2015, Düsseldorf, 2015

Hegner F, Mikulich V, Axtmann G, Rist U, Brücker C:
Extreme event detection in near-wall turbulence using reflection-encoded readout of micropillar arrays
PAMM, Volume 15, Issue 1, pages 475–476, October 2015
DOI: 10.1002/pamm.201510228

Hegner F, Hess D, Brücker C:
Volumetric 3D PIV in heart valve flow
Sep 2015

Heinrich M, Friebe C, Bothe F, Schwarze R:
Experimental and Numerical Investigation of a Gearless One-Motor Contra-Rotating Fan
International Conference on Fan Noise, Technology and Numerical Methods 2015, Lyon, 2015

Heinrich M, Schwarze R:
CFD-Tool for the Automated Design of Volutes for Centrifugal Compressors
ASME Turbo Expo 2015, Montreal, 2015

Kirmse C, Chaves H:
Measurement of the average two-dimensional surface temperature distribution of drops in a melt atomization process
J. Thermal Spray Technology, Vol. 24(4), pp. 690 - 695, 2015
DOI: 10.1007/s11666-015-0217-3

Köhler M, Brücker C:
Characterization of cycle-to-cycle tumble variations at intake stroke using 2C-3D Scanning PIV
Sep 2015

Köhler M, Hess D, Brücker C:
Flying PIV measurements in a 4-valve IC engine water analogue to characterize the near-wall flow evolution
Measurement Science and Technology, Volume 26, Issue 12, 23 October 2015, Article number 125302
DOI: 10.1088/0957-0233/26/12/125302

Kogan I, Pacholak St, Licht M, Schneider J W, Brücker C, Brandt S:
The invisible fish: hydrodynamic constraints for predator-prey interaction in fossil fish Saurichthys compared to recent actinopterygians
Nov 2015, Biology Open 2015
DOI: 10.1242/bio.014720

Kratzsch C, Asad A, Schwarze R:
CFD of the MHD Mold Flow by means of Hybrid LES/RANS Turbulence Modeling
International Journal of Material Science and Production 15 (2015) 49-57
DOI: 10.1515/jmsp-2014-0046

Kratzsch C, Asad A, Schwarze R:
CFD of the MHD Mold Flow by means of Hybrid LES/RANS Turbulence Modeling
MHD 2015: Nagy El-Kaddah Memorial Symposium on Magnetohydrodynamics (MHD) in Material Processing, 2015 TMS Annual Meeting & Exhibition, Orlando, 2015

Kratzsch C, Asad A, Schwarze R:
Comparison of Different Methods to Model Transient MHD Flows in Continuous Casting Molds
Liquid Metal Processing & Casting Conference 2015, Leoben, 2015

Kratzsch C, Timmel K, Eckert S, Schwarze R:
URANS Simulation of Continuous Casting Mold Flow: Assessment of Revised Turbulence Models
steel research international 86 (2015) 400-410
DOI: 10.1002/srin.201400097

Mikulich V, Nassauer B, Kuna M, Brücker C:
Experimental and numerical study of interaction between particle loaded fluid and a rough wall with micropillars
Tribology International, Volume 83, March 2015, Pages 42-50
DOI: 10.1016/j.triboint.2014.10.009

Ponitz B, Sastuba M, Brücker C:
4D visualisation study of a vortex ring life cycle using modal analyses
Journal of Visualization, 29 September 2015, 23p
DOI: 10.1007/s12650-015-0314-x

Rockenbach A, Mikulich V, Brücker C, Schnakenberg U:
Fluid transport via pneumatically actuated waves on a ciliated wall
Journal of Micromechanics and Microengineering, Volume 25, Issue 12, 23 October 2015, Article number 125009
DOI: 10.1088/0960-1317/25/12/125009

Schmitz A, Ponitz B, Brücker C, Schmitz H, Herweg J, Bleckmann H:
Morphological properties of the last primaries, the tail feathers, and the alulae of Accipiter nisus, Columba livia, Falco peregrinus, and Falco tinnunculus
Journal of Morphology, Volume 276, Issue 1, 1 January 2015, Pages 33-46
DOI: 10.1002/jmor.20317

Schwarze R, Haubold D, Kratzsch C:
Numerical Study of effects of Pour Box Design on Tundish Flow Characteristics
Ironmaking and Steelmaking 42 (2015) 148-153
DOI: 10.1179/1743281214Y.0000000221

Schwarze R:
Flüssiger Stahl in silico - numerische Simulation von Prozessen der Stahlherstellung
SWZ Ringvorlesung, Clausthal-Zellerfeld, 2015
Videoaufzeichnung

Bauer K, Brücker Ch:
Behavior of oscillatory tube flow at liquid-gas interfaces
Phys. Fluids Vol. 26(7) (2014), pp. 072106
DOI: 10.1063/1.4890717

Bauer K, Brücker Ch:
Net transport mechanisms in the upper human lung
10th European Fluid Mechanics Conference, 14.- 18. September 2014, Kopenhagen, Technical University of Denmark

Bothe F, Friebe C, Heinrich M, Schwarze R:
CFD-Simulation of Incompressible Turbomachinery - a Comparison of Results from ANSYS FLUENT and OpenFOAM
ASME Turbo Expo 2014, Düsseldorf, 2014

Brücker C, Weidner C:
Influence of self-adaptive hairy flaps on the stall-delay of an airfoil in ramp-up motion
Journal of Fluids and Structures 47 (2014), 31-40
DOI: 10.1016/j.jfluidstructs.2014.02.014

Gladkyy A, Schwarze, R:
Comparison of Different Capillary Bridge Models for Application in the Discrete Element Method
Granular Matter 16 (2014) 911-920
DOI: 10.1007/s10035-014-0527-z

Gladkyy A:
Applications of DEM at TU Bergakademie Freiberg
1st YADE Workshop, Grenoble, 2014

Hegner F, Kamps L, Brücker C:
3D Scanning Stereo PIV in heart valve flow
Proc. 17th Int. Symp. Appl. Laser Techniques to Fluid Mech, Lisbon; 07/2014
https://www.researchgate.net/publication/263952566_3D_Scanning_Stereo_PIV_in_heart_valve_flows

Heinrich M, Schwarze R:
All-Mach Number Density Based Flow Solver for OpenFOAM
ASME Turbo Expo 2014, Düsseldorf, 2014

Kamps L, Hegner F, Hess D, Brücker C:
Volumetric velocimetry study in a transitional wall jet flow with passive flow control via flaps
Proc. 17th Int. Symp. Appl. Laser Techniques to Fluid Mech, Lisbon; 07/2014
http://www.researchgate.net/publication/263954748_Volumetric_velocimetry_study_in_a_transitional_wall_jet_flow_with_passive_flow_control_via_flaps

Kirmse C, Brücker C:
On the Jet Formation through a Leaky Glottis
J. Fluids and Structures, Vol. 50, pp. 137 - 152, 2014
DOI: 10.1016/j.jfluidstructs.2014.06.022

Köhler M, Hess D, Kratzsch C, Brücker C:
Flying PIV measurements in a driven IC engine flow
Proc. 17th Int. Symp. Appl. Laser Techniques to Fluid Mech, Lisbon; 07/2014
http://www.researchgate.net/publication/263953217_Flying_PIV_measurements_in_a_driven_IC_engine_flow

Kratzsch C, Schwarze R:
Modeling of Continuous Casting Mold Flow under Influence of Magnetic Fields
8. European Continuous Casting Conference, Graz, 2014
DOI: 10.13140/2.1.1274.2083

Maiwald, A:
Numerische Untersuchungen zum strömungsinduzierten Emulgieren von Gießpulverschlacken in Kokillen beim Stranggießen
Dissertation, Freiberg, TU Bergakad., 2014

Miao, X:
Numerical Study of a Continuous Casting Process with Electromagnetic Brake
Dissertation, Freiberg, TU Bergakad., 2014
elektronische Version

Mikulich V, Brücker C:
Cavitation by spall fracture of solid walls in liquids
Experiments in Fluids 01/2014
DOI: 10.1007/s00348-014-1785-6

Ostmann S, Chaves H, Brücker C:
3D path tracking of particles in a swirling flow using a light-field camera
Proc. 17th Int. Symp. Appl. Laser Techniques to Fluid Mech, Lisbon; 07/2014
https://www.researchgate.net/publication/263953611_3D_path_tracking_of_particles_in_a_swirling_flow_using_a_light-field_camera

Pacholak S, Hochstein S, Rudert A, Brücker C:
Journal: Unsteady flow phenomena in human undulatory swimming: A numerical approach
Sports Biomechanics, Routledge Taylor & Francis Group, 2014, pp. 1-19
DOI: 10.1080/14763141.2014.893609

Ponitz B, Köhler M, Brücker C:
PIV measurements on a life-size model of a peregrine falcon in dive flight conditions
Proc. 17th International Symposium on Applications of Laser Techniques to Fluid Mechanics, Lisbon, 2014

Ponitz B, Schmitz A, Fischer D, Bleckmann H, Brücker C:
Diving-Flight Aerodynamics of a Peregrine Falcon (Falco peregrinus)
PLoS ONE 9(2): e86506
DOI: 10.1371/journal.pone.0086506

Ponitz B, Triep M, Brücker C:
Aerodynamics of the cupped wings during Peregrine Falcon’s diving flight
Open Journal of Fluid Dynamics, 4, 1-10.
DOI: 10.4236/ojfd.2014.44027

Schwarze R, Eckert S, Gerbeth G, Kratzsch C, Miao X, Timmel K:
Experimentelle und numerische Analyse der Wirkung von EMBr-Systemen an Stranggießkokillen
Frühjahrssitzung des VDEh-AK Strömungsmechanik und Strömungssimulation, Georgsmarienhütte, 2014

Schwarze R:
Historische Strömungsmaschinen zu neuem Leben erweckt
Studium Generale WHZ Zwickau, Zwickau, 2014

Schwarze R:
Electromagnetic Brakes
Workshop Computational Fluid Dynamics in Metallurgy, Düsseldorf, 2014

Timmel, K:
Experimentelle Untersuchung zur Strömungsbeeinflussung mittels elektromagnetischer Bremsen beim kontinuierlichen Strangguss von Stahl
Dissertation, Freiberg, TU Bergakad., 2014
elektronische Version

Brücker C, Hess D, Kitzhofer J:
Single-View Volumetric PIV via High-Resolution Scanning, isotropic voxel restructuring and 3D Least-Squares Matching (3D-LSM)
Meas. Sci. Technol. 24 024001 (2013)
DOI: 10.1088/0957-0233/24/2/024001

Brücker C, Triep M, Mattheus W:
Flow Behaviour of the Glottal Jet in 2D- versus 3D-CFD modeling
Proc. AIA-DAGA Conference on Acoustics, March 18-22, Merano, Italy

Brücker Ch, Weidner C:
Separation control via self-adaptive hairy flaplet arrays
Proc. ERCOFTAC symposium "Unsteady separation in fluid-structure interaction" Mykonos, Greece, June 17-21, 2013

Hagemann R, Heller HP, Schwarze R, Scheller P:
Model Investigations on the Stability of the Steel-Slag Interface in Continuous Casting Process
Metallurgical and Materials Transactions B 44B (2013) 80-90
DOI: 10.1007/s11663-012-9749-9

Hess D, Brücker C, Hegner F, Balmert A, Bleckmann H:
Vortex Formation with a Snapping Shrimp Claw
PLoS ONE 8(11): e77120
DOI: 10.1371/journal.pone.0077120

Hess D, Brücker Ch, Nonn Th.:
Combined 3D Scanning PIV and Scanning LIF for flow and phase transfer measurements around a melting particle
Proc. 10th Int. Symp. PARTICLE IMAGE VELOCIMETRY – PIV13, Delft, The Netherlands, July 2-4, 2013

Hess D, Sastuba M, Kitzhofer J, Brücker Ch.:
4D analysis of flow around a Tumbling Ring-Type Particle using Scanning PIV and 3D Least Squares Matching
Proc. 10th Int. Symp. PARTICLE IMAGE VELOCIMETRY – PIV13, Delft, The Netherlands, July 2-4, 2013

Heinrich M, Schwarze R:
Simulation of the Compressor Stage of a Turbocharger - Validation of the Open Source Library OpenFOAM
ASME Turbo Expo 2013, San Antonio, 2013

Heinrich M, Schwarze R:
Simulation and Validation of the Compressor Stage of a Turbocharger Using OpenFOAM
International Conference on Compressors and their Systems 2013, London, 2013

Klostermann J, Schaake K, Schwarze R:
Numerical Simulation of a Single Rising Bubble by VOF with Surface Compression
International Journal for Numerical Methods in Fluids 71 (2013) 960-982
DOI: 10.1002/fld.3692

Klostermann J, Schwarze R, Brücker Ch:
Meshing of Porous Foam Structures on the Micro-Scale
Engineering with Computers 29 (2013) 95-110
DOI: 10.1007/s00366-011-0247-5

Mikulich V, Brücker C:
Flow and motion behavior of particle suspensions in shear flow over a rough surface
Computational Methods in Multiphase Flow VII, Edited by C. A. Brebbia and P. Vorobieff, WIT Transactions on Engineering Sciences 79, (2013), S. 263-273.
DOI: 10.2495/MPF130221

Mikulich V, Brücker C, Chaves H:
Study of hydrodynamic mechanisms of wire sawing
Proc. Advanced methods and technologies of materials, development and processing, September 18 – 20, 2013, Minsk (2013), S. 162-170

Mikulich V, Brücker C:
Messungen der Kontaktkräfte in gescherten Partikelsuspensionen mittels Mikro-Cantilever Arrays
Tribologie – Fachtagung, 30.09.-02.10. Göttingen, GfT, (2013), S. 33/1-33/10

Schwarze R:
CFD-Modellierung - Grundlagen und Anwendungen bei Strömungsprozessen,
Berlin: Springer-Verlag, 2013
DOI: 10.1007/978-3-642-24378-3

Schwarze R, Gladky A, Luding S:
Flow Rules for CFD Simulations of Wet Granular Flows
Particles 2013, Stuttgart, 2013

Schwarze R, Gladky A, Uhlig F, Luding S:
Rheology of Weakly Wetted Granular Materials: a Comparison of Experimental and Numerical Data
Granular Matter 15 (2013) 455-465
DOI: 10.1007/s10035-013-0430-z

Schwarze R, Uhlig F, Luding S:
Numerische Rheologie feuchter, granularer Materialien
Jahrestreffen der ProcessNet-Fachgruppen Agglomerations- und Schüttguttechnik und Computational Fluid Dynamics, Weimar, 2013

Skupsch C, Brücker C:
Multiple-plane particle image velocimetry using a light-field camera
Opt. Express 21(2):1726-1740 (2013)
DOI: 10.1364/OE.21.001726

Triep M, Hess D, Chaves H, Brücker C, Balmert A, et al.:
3D Flow in the Venom Channel of a Spitting Cobra: Do the Ridges in the Fangs Act as Fluid Guide Vanes?
PLoS ONE 8(5): e61548
DOI: 10.1371/journal.pone.0061548

Bauer D, Chaves H and Arcoumanis C:
Measurements of void fraction distribution in cavitating pipe flow using x-ray CT
Measurement Science and Technology, 23 (2012) 055302 (10pp)
DOI: 10.1088/0957-0233/23/5/055302

Bauer K, Brücker Ch:
3D Structure of secondary streaming flow in the upper airways
9th European Fluid Mech. Conference, EFMC9, Rome, Sept. 9-13, 2012

Bauer K, Rudert A, Brücker Ch:
Three-Dimensional Flow Patterns in the Upper Human Airways
Journal of Biomechanical Engineering, Vol. 134(7), (2012), pp. 071006-15
DOI: 10.1115/1.4006983

Bauer K, Rudert A, Brücker Ch:
3D Structure of secondary streaming flow in the upper airways
9th European Fluid Mechanics Conference, 9-13 September 2012 University of Rome "Tor Vergata"

Brücker Ch, Ponitz B, Triep M:
Aerodynamics of the diving flight of a falcon peregrinus,
9th European Fluid Mech. Conference, EFMC9, Rome, Sept. 9-13, 2012

Brücker Ch, Mattheus W, Schwarze R, Kirmse C, Triep M:
Numerical and Experimental Three-Dimensional Vocal Folds Model for the study of the Flow near the Glottis
ICVPB 2012 : The 8th International Conference on Voice Physiology and Biomechanics, Erlangen, Juli 5-7, 2012

Chaves H:
A weather independent illumination for field LSPIV,
Proc. 16th International Symposium on Applications of Laser Techniques to Fluid Mechanics, Lisbon, 2012

Heinrich M, Bäre A, Hofemeier P, Schwarze R:
Turbomachinery Flow Simulations with OpenFOAM
6th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012), Wien, 2012

Hess D, Tag S, Brücker C:
Volumetric flow studies in a 4-stroke water-analogue IC-engine using high-speed Scanning PIV,
Proc. 16th International Symposium on Applications of Laser Techniques to Fluid Mechanics, Lisbon, 2012

Keißner A, Brücker C:
Directional fluid transport along artificial ciliary surfaces with base-layer actuation of counter-rotating orbital beating patterns
Journal Soft Matter, 2012, 8 (19), 5342 - 5349
DOI: 10.1039/C2SM25287B

Kirmse C, Triep M, Brücker Ch:
Effects of the false vocal folds on the jet flow in a leaky glottis
ICVPB 2012 : The 8th International Conference on Voice Physiology and Biomechanics, Erlangen,Juli 5-7, 2012

Klostermann J, Schaake K, Schwarze R:
Numerical Simulation of a Single Rising Bubble by VOF with Surface compression
International Journal for Numerical Methods in Fluids (2012)
DOI: 10.1002/fld.3692

Klostermann, J, Schwarze, R, Brücker, Ch:
Meshing of porous foam structures on the micro-scale
Engineering with Computers, 2012
DOI: 10.1007/s00366-011-0247-5

Kunze S, Brücker C:
Control of vortex shedding on a circular cylinder using self-adaptive hairy-flaps
Comptes Rendus Mécanique, Vol. 340, No. 1-2. (January 2012), pp. 41-56
DOI: 10.1016/j.crme.2011.11.009

Nonn T, Kitzhofer J, Hess D, Brücker C:
Measurements in a IC-engine flow using light field volumetric velocimetry,
Proc. 16th International Symposium on Applications of Laser Techniques to Fluid Mechanics, Lisbon, 2012

Ponitz B, Sastuba M, Brücker C, Kitzhofer J:
Volumetric velocimetry via scanning back-projection and least-squares-matching algorithms of a vortex ring,
Proc. 16th International Symposium on Applications of Laser Techniques to Fluid Mechanics, Lisbon, 2012

Schwarze R:
Beiträge zur Analyse angewandter Strömungen mittels numerischer Strömungsmechanik (Habilitationsschrift), Freiberg, 2012

Skupsch C, Brücker C:
Single camera, multi-plane PIV by synthetic refocusing,
Proc. 16th International Symposium on Applications of Laser Techniques to Fluid Mechanics, Lisbon, 2012

Skupsch C, Klotz T, Chaves H, and Brücker C:
Channelling optics for high quality imaging of sensory hair
Rev. Sci. Instrum. 83, 045001 (2012)
DOI: 10.1063/1.3697997

Uhlig F, Schwarze R, Luding S:
Computational Rheology of Core-Shooting Materials
6th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012), Wien, 2012