Wissenschaftliche Publikationen

2020

  • Baumgart, C., Weigelt, C., Lißner, A., Martin, S., Aneziris, C. G., Krüger L.
    Processing of 17Cr7Mn6Ni TRIP Steel Powder by Extrusion at Room Temperature and Pressureless Sintering, Adv. Eng. Mater., (2020) 2000019, pp. 1-10, DOI: 10.1002/adem.202000019
  • Biermann, H., Droste, M.
    Cyclic Deformation and Fatigue Behavior of Metastable Austenitic Steels and Steel-Matrix-Composites, Chapter 13, in: Springer Series in Materials Science, Austenitic TRIP/TWIP Steels and Steel-Zirconia Composites, 298 (2020), pp. 413-449, Hrsg.: Horst Biermann, Christos C. G. Aneziris, Verlag: Springer Nature Switzerland AG, Cham, Switzerland, ISBN 978-3-030-42602-6, ISBN 978-3-030-42603-3 (eBook), DOI: 10.1007/978-3-030-42603-3
  • Berek, H., Oppelt, M., Aneziris, C. G.
    X-Ray Computer Tomography for Three-Dimensional Characterization of Deformation and Damage Processes, Chapter 16, in: Springer Series in Materials Science, Austenitic TRIP/TWIP Steels and Steel-Zirconia Composites, 298 (2020), pp. 512-556, Hrsg.: Horst Biermann, Christos C. G. Aneziris, Verlag: Springer Nature Switzerland AG, Cham, Switzerland, ISBN 978-3-030-42602-6, ISBN 978-3-030-42603-3 (eBook), DOI: 10.1007/978-3-030-42603-3
  • Borrmann, S., Neumann, S., Schwarze, R.
    CFD Analysis of the Particle and Melt Flow Behavior During Fabrication and Processing of TRIP-Matrix-Composites, Chapter 18, in: Springer Series in Materials Science, Austenitic TRIP/TWIP Steels and Steel-Zirconia Composites, 298 (2020), pp. 585-619, Hrsg.: Horst Biermann, Christos C. G. Aneziris, Verlag: Springer Nature Switzerland AG, Cham, Switzerland, ISBN 978-3-030-42602-6, ISBN 978-3-030-42603-3 (eBook), DOI: 10.1007/978-3-030-42603-3
  • Burgold, A., Droste, M., Seupel, A., Budnitzki, M., Biermann, H., Kuna, M. Modeling of the cyclic deformation behavior of austenitic TRIP-steels, International Journal of Plasticity, 133 (2020) 102792, pp. 1-14, DOI: 10.1016/j.ijplas.2020.102792
  • Burkhardt, C., Wagner, R., Baumgart, C., Günther, J., Krüger, L., Biermann, H.
    Microstructural and Mechanical Characterization of Square-Celled TRIP Steel Honeycomb Structures Producedby Electron Beam Melting, Adv. Eng. Mater., (2020) 2000037, pp. 1-10, DOI: 10.1002/adem.202000037
  • Decker, S., Baumgart, C., Krüger, L., Schumacher, A.
    Electron Beam Melting of various structures and their quasi-static compression behavior, Materials Science & Engineering A, 793 (2020) 139849, pp. 1-9, DOI: 10.1016/j.msea.2020.139849
  • Decker, S., Radajewski, M., Krüger, L.
    Synthesis of TRIP Matrix Composites by Field Assisted Sintering Technology—Challenges and Results, Chapter 9, in: Springer Series in Materials Science, Austenitic TRIP/TWIP Steels and Steel-Zirconia Composites, 298 (2020), pp. 257-282, Hrsg.: Horst Biermann, Christos C. G. Aneziris, Verlag: Springer Nature Switzerland AG, Cham, Switzerland, ISBN 978-3-030-42602-6, ISBN 978-3-030-42603-3 (eBook), DOI: 10.1007/978-3-030-42603-3
  • Eckner, R., Baumgart, C., Krüger, L.
    Investigations on the Influence of Strain Rate, Temperature and Reinforcement on Strength and Deformation Behavior of CrMnNi-Steels, Chapter 12, in: Springer Series in Materials Science, Austenitic TRIP/TWIP Steels and Steel-Zirconia Composites, 298 (2020), pp. 379-412, Hrsg.: Horst Biermann, Christos C. G. Aneziris, Verlag: Springer Nature Switzerland AG, Cham, Switzerland, ISBN 978-3-030-42602-6, ISBN 978-3-030-42603-3 (eBook), DOI: 10.1007/978-3-030-42603-3
  • Guk, S., Kawalla, R., Prahl, U.
    Understanding of Processing, Microstructure and Property Correlations During Different Sintering Treatments of TRIP-Matrix-Composites, Chapter 6, in: Springer Series in Materials Science, Austenitic TRIP/TWIP Steels and Steel-Zirconia Composites, 298 (2020), pp. 167-196, Hrsg.: Horst Biermann, Christos C. G. Aneziris, Verlag: Springer Nature Switzerland AG, Cham, Switzerland, ISBN 978-3-030-42602-6, ISBN 978-3-030-42603-3 (eBook), DOI: 10.1007/978-3-030-42603-3
  • Guk, S., Kawalla, R., Prahl, U.
    Understanding of Processing, Microstructure and Property Correlations for Flat Rolling of Presintered TRIP-Matrix Composites, Chapter 7, in: Springer Series in Materials Science, Austenitic TRIP/TWIP Steels and Steel-Zirconia Composites, 298 (2020), pp. 197-222, Hrsg.: Horst Biermann, Christos C. G. Aneziris, Verlag: Springer Nature Switzerland AG, Cham, Switzerland, ISBN 978-3-030-42602-6, ISBN 978-3-030-42603-3 (eBook), DOI: 10.1007/978-3-030-42603-3
  • Halbauer, L., Buchwalder, A., Biermann, H.
    Electron Beam Technologies for the Joining of High Alloy TRIP/TWIP Steels and Steel-Matrix Composites, Chapter 10, in: Springer Series in Materials Science, Austenitic TRIP/TWIP Steels and Steel-Zirconia Composites, 298 (2020), pp. 283-323, Hrsg.: Horst Biermann, Christos C. G. Aneziris, Verlag: Springer Nature Switzerland AG, Cham, Switzerland, ISBN 978-3-030-42602-6, ISBN 978-3-030-42603-3 (eBook), DOI: 10.1007/978-3-030-42603-3
  • Hauser, M., Wendler, M., Mola, J., Fabrichnaya, O., Volkova, O., Weiß, A. Thermodynamic-Mechanical Modelingof Metastable High Alloy AusteniticCrMnNi Steels, Chapter 20, in: Springer Series in Materials Science, Austenitic TRIP/TWIP Steels and Steel-Zirconia Composites, 298 (2020), pp. 651-678, Hrsg.: Horst Biermann, Christos C. G. Aneziris, Verlag: Springer Nature Switzerland AG, Cham, Switzerland, ISBN 978-3-030-42602-6, ISBN 978-3-030-42603-3 (eBook), DOI: 10.1007/978-3-030-42603-3
  • Heinrich, M., Schwarze, R.
    3D-coupling of Volume-of-Fluid and Lagrangian particle tracking for spray atomization simulation in OpenFOAM, SoftwareX, 11 (2020) 100483, pp. 1-7, DOI: 10.1016/j.softx.2020.100483
  • Heuer, C., Oppelt, M., Aneziris, C. G.
    Ceramic Casting Technologies for Fine and Coarse Grained TRIP-Matrix-Composites, Chapter 1, in: Springer Series in Materials Science, Austenitic TRIP/TWIP Steels and Steel-Zirconia Composites, 298 (2020), pp. 1-40, Hrsg.: Horst Biermann, Christos C. G. Aneziris, Verlag: Springer Nature Switzerland AG, Cham, Switzerland, ISBN 978-3-030-42602-6, ISBN 978-3-030-42603-3 (eBook), DOI: 10.1007/978-3-030-42603-3
  • Huang, Q., Wendler, M., Mola, J., Weiß, A., Krüger, L., Volkova, O.
    Design of High Alloy Austenitic CrMnNi Steels Exhibiting TRIP/TWIP Properties, Chapter 2, in: Springer Series in Materials Science, Austenitic TRIP/TWIP Steels and Steel-Zirconia Composites, 298 (2020), pp. 41-75, Hrsg.: Horst Biermann, Christos C. G. Aneziris, Verlag: Springer Nature Switzerland AG, Cham, Switzerland, ISBN 978-3-030-42602-6, ISBN 978-3-030-42603-3 (eBook), DOI: 10.1007/978-3-030-42603-3
  • Kirschner, M., Guk, S., Kawalla, R., Prahl, U.
    Powder Forging of Presintered TRIP-Matrix Composites, Chapter 8, in: Springer Series in Materials Science, Austenitic TRIP/TWIP Steels and Steel-Zirconia Composites, 298 (2020), pp. 223-255, Hrsg.: Horst Biermann, Christos C. G. Aneziris, Verlag: Springer Nature Switzerland AG, Cham, Switzerland, ISBN 978-3-030-42602-6, ISBN 978-3-030-42603-3 (eBook), DOI: 10.1007/978-3-030-42603-3
  • Korobeinikov, I., Chaves, H., Volkova, O.
    Tailoring of Thermophysical Properties of New TRIP/TWIP Steel Alloys to Optimize Gas Atomization, Chapter 3, in: Springer Series in Materials Science, Austenitic TRIP/TWIP Steels and Steel-Zirconia Composites, 298 (2020), pp. 77-112, Hrsg.: Horst Biermann, Christos C. G. Aneziris, Verlag: Springer Nature Switzerland AG, Cham, Switzerland, ISBN 978-3-030-42602-6, ISBN 978-3-030-42603-3 (eBook), DOI: 10.1007/978-3-030-42603-3
  • Korobeinikov, I., Chebykin, D., Seetharaman, S., Volkova, O.
    Effect of Boron Micro‑alloying on the Surface Tension of Liquid Iron and Steel Alloys, International Journal of Thermophysics, 12th Asian Thermophysical Properties Conference, 41 (2020) 56, pp. 1-14, DOI: 10.1007/s10765-020-02628-5
  • Krause, D., Krüger, L.
    Determination of subsequent yield loci by combined tension-torsion-loading and influence of state of stress on the TRIP effect of hot pressed metastable austenitic steel grade CrMnNi16-7-3, Materials Science & Engineering A, 769 (2020) 138493, pp. 1-6, DOI: 10.1016/j.msea.2019.138493
  • Kuprava, A., Saenko, I., Fabrichnaya, O.
    Heat capacity measurement ofC14-ZrMn2 and thermodynamic re-assessment of the Mn–Zr system, CALPHAD, 68 (2020), DOI:10.1016/j.calphad.2020.101745
  • Lehnert, R., Wagner, R., Burkhardt, C., Clausnitzer; P., Weidner, A., Wendler, M., Volkova, O., Biermann, H.
    Microstructural and mechanical characterization of high-alloy quenching and partitioning TRIP steel manufactured by electron beam melting, Materials Science & Engineering A, 794 (2020) 139684, DOI: 10.1016/j.msea.2020.139684
  • Mandel, M., Kietov, V., Krüger, L.
    The Corrosion Behavior of High-Alloy CrMnNi Steels—A Research Work on Electrochemical Degradation in Saltand Acid-Containing Environments, Chapter 17, in: Springer Series in Materials Science, Austenitic TRIP/TWIP Steels and Steel-Zirconia Composites, 298 (2020), pp. 557-584, Hrsg.: Horst Biermann, Christos C. G. Aneziris, Verlag: Springer Nature Switzerland AG, Cham, Switzerland, ISBN 978-3-030-42602-6, ISBN 978-3-030-42603-3 (eBook), DOI: 10.1007/978-3-030-42603-3
  • Mandel, M., Kietov, V., Wendler, M., Krüger, L.
    The Influence of H2SO4-NaCl Electrolyte Composition to the Electrochemical Noise Behaviour of a High-Alloy Cast Steel, Defect and Diffusion Forum, (2020) 400, pp. 75-81, ISSN: 1662-9507
  • Oppelt, M., Aneziris, C. G.
    Slurry-Based Fabrication of Spherical Structures with Zirconium Dioxide and TRIP Steel, Interceram, 69 (2020) 3, pp. 28-32
  • Prüger, S., Kiefer, B.
    A comparative study of integration algorithms for finite single crystal (visco-)plasticity, International Journal of Mechanical Sciences, 2020, pp. 1-47, DOI: 10.1016/j.ijmecsci.2020.105740
  • Prüger, S., Kiefer, B.
    Towards the Crystal Plasticity Based Modeling of TRIP-Steels—From Material Point to Structural Simulations, Chapter 24, in: Springer Series in Materials Science, Austenitic TRIP/TWIP Steels and Steel-Zirconia Composites, 298 (2020), pp. 793-823, Hrsg.: Horst Biermann, Christos C. G. Aneziris, Verlag: Springer Nature Switzerland AG, Cham, Switzerland, ISBN 978-3-030-42602-6, ISBN 978-3-030-42603-3 (eBook), DOI: 10.1007/978-3-030-42603-3
  • Qayyum, F., Guk, S., Prüger, S., Schmidtchen, M., Saenko, I., Kiefer, B., Kawalla, R., Prahl, U.
    Investigating the local deformation and transformation behavior of sintered X3CrMnNi16-7-6 TRIP steel using a calibrated crystal plasticity-based numerical simulation model, International Journal of Materials Research, 2020, pp. 1-13, DOI: 10.3139/146.111900
  • Rafaja, D., Ullrich, C., Motylenko, M., Martin, S.
    Microstructure Aspects of the Deformation Mechanisms in Metastable Austenitic Steels, Chapter 11, in: Springer Series in Materials Science, Austenitic TRIP/TWIP Steels and Steel-Zirconia Composites, 298 (2020), pp. 325-377, Hrsg.: Horst Biermann, Christos C. G. Aneziris, Verlag: Springer Nature Switzerland AG, Cham, Switzerland, ISBN 978-3-030-42602-6, ISBN 978-3-030-42603-3 (eBook), DOI: 10.1007/978-3-030-42603-3
  • Rähmer, P., Dommaschk, C., Wolf, G.
    Production of Ceramic Steel Composite Castings Through Infiltration, Chapter 4, in: Springer Series in Materials Science, Austenitic TRIP/TWIP Steels and Steel-Zirconia Composites, 298 (2020), pp. 113-137, Hrsg.: Horst Biermann, Christos C. G. Aneziris, Verlag: Springer Nature Switzerland AG, Cham, Switzerland, ISBN 978-3-030-42602-6, ISBN 978-3-030-42603-3 (eBook), DOI: 10.1007/978-3-030-42603-3 
  • Rajendran, M. K., Kuna, M., Budnitzki, M.
    Undercooling versus stress induced martensitic phase transformation: the case of MgO - partially stabilized zirconia, Computational Material Science, 174 (2020) 109460, pp. 1-8
  • Rajendran, M. K., Budnitzki, M., Kuna, M.
    Multi-scale Modeling of Partially Stabilized Zirconia with Applications to TRIP-Matrix Composites, Chapter 21, in: Springer Series in Materials Science, Austenitic TRIP/TWIP Steels and Steel-Zirconia Composites, 298 (2020), pp. 679-721, Hrsg.: Horst Biermann, Christos C. G. Aneziris, Verlag: Springer Nature Switzerland AG, Cham, Switzerland, ISBN 978-3-030-42602-6, ISBN 978-3-030-42603-3 (eBook), DOI: 10.1007/978-3-030-42603-3      
  • Saenko, I., Fabrichnaya, O.
    Heat capacity measurements of the δ-phase Mg2Zr4.2Ti0.8O12 and thermodynamic modelling of the ZrO2–TiO2–MgO system, Journal of the European Ceramic Society, (2020), pp. 1-10, DOI: 10.1016/j.jeurceramsoc.2020.02.047
  • Saenko, I., Fabrichnaya, O.
    Thermodynamic Modelling in the Frames of the TRIP-Matrix-Composite Development, Chapter 19, in: Springer Series in Materials Science, Austenitic TRIP/TWIP Steels and Steel-Zirconia Composites, 298 (2020), pp. 621-649, Hrsg.: Horst Biermann, Christos C. G. Aneziris, Verlag: Springer Nature Switzerland AG, Cham, Switzerland, ISBN 978-3-030-42602-6, ISBN 978-3-030-42603-3 (eBook), DOI: 10.1007/978-3-030-42603-3
  • Sebastian, T., Preisker, T. R., Gorjan, L., Graule, T., Aneziris, C. G., Clemens, F. J.
    Synthesis of hydroxyapatite fibers using electrospinning: A study of phase evolution based on polymer matrix, Journal of the European Ceramic Society, 2020, DOI: 10.1016/j.jeurceramsoc.2020.01.070
  • Seupel, A., Burgold, A., Prüger, S., Budnitzki, M., Kuna, M.
    Modeling of the Thermomechanical Behavior, Damage, and Fracture of High Alloy TRIP-Steel, Chapter 22, in: Springer Series in Materials Science, Austenitic TRIP/TWIP Steels and Steel-Zirconia Composites, 298 (2020), pp. 723-769, Hrsg.: Horst Biermann, Christos C. G. Aneziris, Verlag: Springer Nature Switzerland AG, Cham, Switzerland, ISBN 978-3-030-42602-6, ISBN 978-3-030-42603-3 (eBook), DOI: 10.1007/978-3-030-42603-3
  • Spitzenberger, A., Neumann, S., Heinrich, M., Schwarze, R.
    Particle detection in VOF-simulations with OpenFOAM, SoftwareX, 11 (2020) 100382
  • Strobl, R., Budnitzki, M., Sandfeld, S.
    Properties of Phase Microstructures and Their Interaction with Dislocations in the Context of TRIP Steel Systems, Chapter 23, in: Springer Series in Materials Science, Austenitic TRIP/TWIP Steels and Steel-Zirconia Composites, 298 (2020), pp. 771-792, Hrsg.: Horst Biermann, Christos C. G. Aneziris, Verlag: Springer Nature Switzerland AG, Cham, Switzerland, ISBN 978-3-030-42602-6, ISBN 978-3-030-42603-3 (eBook), DOI: 10.1007/978-3-030-42603-3
  • Weidner, A.
    Deformation processes in TRIP/TWIP steels: In situ characterization techniques, Springer Series in Materials Science, Verlag: SpringerNatur, 2020, ISBN 978-3-030-37148-7
  • Weidner, A., Lehnert, R., Biermann, H.
    Scanning Electron Microscopy and Complementary In Situ Characterization Techniques for Characterization of Deformation and Damage Processes, Chapter 15, in: Springer Series in Materials Science, Austenitic TRIP/TWIP Steels and Steel-Zirconia Composites, 298 (2020), pp. 485-527, Hrsg.: Horst Biermann, Christos C. G. Aneziris, Verlag: Springer Nature Switzerland AG, Cham, Switzerland, ISBN 978-3-030-42602-6, ISBN 978-3-030-42603-3 (eBook), DOI: 10.1007/978-3-030-42603-3
  • Weidner, A., Fischer, K., Biermann, H. 
    Ultrafine-grained CrMnNi steels: Lueders phenomenon and texture inheritance, Materials Science & Engineering A, 799 (2021) 140197, pp. 1-17, DOI: 10.1016/j.msea.2020.140197
  • Weigelt, C., Oppelt, M., Aneziris, C. G.
    Ceramic Extrusion Technologies for Fine Grained TRIP Matrix Composite Materials, Chapter 5, in: Springer Series in Materials Science, Austenitic TRIP/TWIP Steels and Steel-Zirconia Composites, 298 (2020), pp. 139-166, Hrsg.: Horst Biermann, Christos C. G. Aneziris, Verlag: Springer Nature Switzerland AG, Cham, Switzerland, ISBN 978-3-030-42602-6, ISBN 978-3-030-42603-3 (eBook), DOI: 10.1007/978-3-030-42603-3
  • Wolf, C. H., Burgold, A., Henkel, S., Kuna, M., Biermann, H.
    Crack growth behaviour in biaxial stress fields: calculation of K-factors for cruciform specimens, Theoretical and Applied Fracture Mechanics, 107 (2020), p. 102521
  • Wolf, C. H., Henkel, S., Burgold, A., Qiu, Y., Kuna, M., Biermann, H.
    Kreuzproben zur Untersuchung des Risswachstums bei ein- und mehrachsiger Ermüdungsbeanspruchung, 52. Tagung des DVM Arbeitskreises Bruchmechanik und Bauteilsicherheit, 18.-19.02.2020, DVM-Bericht 252 (2020), pp. 41-50 ISSN 2366-4797
  • Wolf, C. H., Henkel, S., Biermann, H.
    Behaviour of Metastable and Stable Austenitic Stainless Steels Under Planar-Biaxial Load, Chapter 14, in: Springer Series in Materials Science, Austenitic TRIP/TWIP Steels and Steel-Zirconia Composites, 298 (2020), pp. 451-483, Hrsg.: Horst Biermann, Christos C. G. Aneziris, Verlag: Springer Nature Switzerland AG, Cham, Switzerland, ISBN 978-3-030-42602-6, ISBN 978-3-030-42603-3 (eBook), DOI: 10.1007/978-3-030-42603-3

2019

  • Baumgart, C., Weigelt, C., Wendler, M., Saenko, I., Aneziris, C. G., Volkova, O., Krüger, L.
    Challenges in Pressureless Sintering of Interstitially Alloyed TRIP Steel and Resulting Mechanical Properties, Adv. Eng. Mater., 21 (2019) 5, pp. 1-8, DOI: 10.1002/adem.201800700
  • Biermann, H.
    Editorial - TRIP-Matrix-Composites, Adv. Eng. Mater., (2019) 1900126, pp. 1-1, DOI: 10.1002/adem.201900126
  • Borrmann, S., Kratzsch, C., Halbauer, L., Buchwalder, A., Biermann, H., Saenko, I., Chattopadhyay, K., Schwarze, R.
    Electron beam welding of CrMnNi-steels: CFD-modeling with temperature sensitive thermophysical properties, International Journal of Heat and Mass Transfer, 139 (2019), pp. 442–455
    DOI: 10.1016/j.ijheatmasstransfer.2019.04.125
  • Borrmann, S., Asad, A., Halbauer, L., Buchwalder, A., Biermann, H., Schwarze, R.
    Numerical Simulation of the Particle Displacement during Electron Beam Welding of a Dissimilar Weld Joint with TRIP-Matrix-Composite, Adv. Eng. Mater., 21 (2019) 5, pp. 1-9, DOI: 10.1002/adem.201800741
  • Borrmann, S., Schwarze, R.
    A CFD Model for Simulating the Electron Beam Welding of TRIP-Matrix-Composites, Appl. Math. Mech., PAMM (Proc.), (2019) 19:e201900249, pp. 1-2, DOI: 10.1002/pamm.201900249
  • Decker, S., Krüger, L.
    Influence of high-energy ball milling on Mg-PSZ-reinforced TRIP steel-matrix composites synthesized by FAST/SPS, Materials Science and Engineering A, 761 (2019), 137974, pp. 1-8, DOI: 10.1016/j.msea.2019.05.104
  • Droste, M., Wendler, M., Volkova, O., Biermann, H.
    Cyclic Deformation Behavior of an Ultra-High Strength Austenitic-Martensitic Steel Treated by Novel Q&P Processing, Adv. Eng. Mater., 21 (2019) 5, pp. 1-10, DOI: 10.1002/adem.201800732
  • Eckner, R., Krüger, L., Ullrich, C., Wendler, M., Volkova, O. 
    Fracture toughness of high-alloy austenitic-martensitic TRIP steels after Q&P processing, International Journal of Fracture, (2019) 215, pp. 139-151, ISSN: 0376-9429, DOI: 10.1007/s10704-018-0332-5
  • Halbauer, L., Laubstein, R., Radajewski, M., Buchwalder, A., Krüger, L., Biermann, H.
    Electron Beam Welding and Characterization of Dissimilar Joints with TWIP Matrix Composites, Adv. Eng. Mater., 21 (2019) 5, pp. 1-10, DOI: 10.1002/adem.201800586
  • Hauser, M., Wendler, M., Weiß, A., Volkova, O., Mola, J.
    On the Critical Driving Force for Deformation-Induced α'-Martensite Formation in Austenitic Cr–Mn–Ni Steels, Adv. Eng. Mater., 21 (2019) 5, pp. 1-6,
    DOI: 10.1002/adem.201800676
  • Kietov, V., Mandel, M., Krüger, L.
    Combination of Electrochemical Noise and Acoustic Emission for Analysis of the Pitting Corrosion Behavior of an Austenitic Stainless Cast Steel, Adv. Eng. Mater., 21 (2019) 5, pp. 1-6, DOI: 10.1002/adem.201800682
  • Kirschner, M., Guk, S., Kawalla, R., Prahl, U.
    Further Development of Process Maps for TRIP Matrix Composites during Powder Forging, Materials Science Forum, 949 (2019), pp. 15-23, ISSN: 1662-9752, DOI: 10.4028/www.scientific.net/MSF.949.15
     
  • Kirschner, M., Eckner, R., Guk, S., Krüger, L., Kawalla, R., Prahl, U.
    Deformation Behavior of Particle Reinforced TRIP Steel/MgPSZ Composite at Hot Working Temperatures, steel research int., 90 (2019) 1800334, pp. 1-6, DOI: 10.1002/srin.201800334
  • Korobeinikov, I., Perminov, A., Heller, H.-P., Volkova, O.
    Inert Gas Atomization of High-Nitrogen TRIP-Steels, Adv. Eng. Mater., 21 (2019) 5, pp. 1-7, DOI: 10.1002/adem.201800753
  • Krause, D., Eckner, R., Krüger, L.
    Influence of Work-Hardening and Lower Temperatures on the Yield Stress of Austenitic Stainless Steel X2CrNi18-10 under Combined Tension-Torsion Loading, Adv. Eng. Mater., 21 (2019) 5, pp. 1-8, DOI: 10.1002/adem.201800663
  • Laubstein, R., Halbauer, L., Martin, S., Klemm, V., Zenker, R., Buchwalder, A., Biermann, H.
    Quality of dissimilar welded particle-reinforced TRIP/TWIP steels generated by electron beam braze-welding, Welding in the World, (2019) DOI:10.1007/s40194-019-00780-7
  • Lehnert, R., Weidner, A., Motylenko, M., Biermann, H.
    Strain Hardening of Phases in High-Alloy CrMnNi Steel as a Consequence of Pre-Deformation Studied by Nanoindentation, Adv. Eng. Mater., (2019) 1800801, pp. 1-14, DOI: 10.1002/adem.201800801
  • Lehnert, R., Weidner. A., Schimpf, C., Wendler, M., Biermann, H.
    Martensite formation during tensile deformation of high-alloy TRIP steel after quenching and partitioning route investigated by digital image correlation, Materialia, 8 (2019) 100498, pp. 1-13 
  • Mandel, M., Kietov, V., Krüger, L.
    Discrete Wavelet Analysis of Electrochemical Current Noise of a High-Alloy Cast Steel in Sulfuric Acid and Sodium Chloride Solution, Diffusion Foundations, 22 (2019), pp. 48-54, ISSN: 2296-3642, doi:10.4028/www.scientific.net/DF.22.48
  • Mukhamedov, B. O., Saenko, I., Ponomareva, A. V., Kriegel, M. J., Chugreev, A., Udovsky, A., Fabrichnaya, O., Abrikosov, I. A.
    Thermodynamic and physical properties of Zr3Fe and ZrFe2 intermetallic compounds, Intermetallics, (2019), DOI:10.1016/j.intermet.2019.01.018
  • Nam, A., Turdimatov, M., Kawalla, R., Prahl, U.
    Inter-Pass Softening Behavior of Fe–16Cr–xMn–4Ni–0.05C–0.17N Steel, Adv. Eng. Mater., 21 (2019) 5, pp. 1-8, DOI: 10.1002/adem.201800692
  • Oppelt, M., Leißner, T., Berek, H., Baumgart, C., Krüger, L., Peuker, U., Aneziris, C. G.
    Processing and Characterization of Beads with Graded Layer Compositions Based on Zirconia and TRIP-Steel, Adv. Eng. Mater., 21 (2019) 5, pp. 1-9, DOI: 10.1002/adem.201800615
  • Prüger, S., Kiefer, B.
    On the robustness of stress integration algorithms for finite single crystal (visco)-plasticity, Appl. Math. Mech., PAMM-Proc., 2019, 19:e201900129, pp. 1-2, DOI: 10.1002/pamm.201900129
  • Qiu, Y., Kaden, N., Schmidtchen, M., Prahl, U., Biermann, H., Weidner, A.
    Laminated TRIP/TWIP Steel Composites Produced by Roll Bonding, Metals, 9 (2019) 195, pp. 1-18, DOI: 10.3390/met9020195
  • Radajewski, M., Eckner, R., Decker, S., Wendler, M., Krüger, L.
    Influence of Temperature and Strain Rate during Thermomechanical Treatment of a Metastable Austenitic TRIP Steel Compacted by SPS/FAST, Adv. Eng. Mater., 21 (2019) 5, pp. 1-9, DOI: 10.1002/adem.201800617
  • Radajewski, M., Decker, S., Krüger, L.
    Direct temperature measurement via thermocouples within an SPS/FAST graphite tool, Measurement, 147 (2019) 106863, pp. 1-7, DOI: 10.1016/j.measurement.2019.106863
  • Rahimi, R., Volkova, O., Biermann, H., Mola, J.
    Thermal Analysis of the Formation and Dissolution of Cr-Rich Carbides in Al-Alloyed Stainless Steels, Adv. Eng. Mater., 21 (2019) 5, pp. 1-7, DOI: 10.1002/adem.201800658
  • Saenko, I., Tsukrenko, V., Ilatovskaia, M., Pavlyuchkov, D., Savinykh, G., Fabrichnaya, O.
    Experimental Investigation of Phase Equilibria in the ZrO2–TiO2–MgO System, Adv. Eng. Mater., 21 (2019) 5, pp. 1-17, DOI: 10.1002/adem.201800655
  • Saenko, I., Kuprava, A., Udovsky, A., Fabrichnaya, O.
    Heat capacity measurement of Zr2Fe and thermodynamic re-assessment of the Fe–Zr system, Calphad, 66 (2019) 101625, DOI:10.1016/j.calphad.2019.05.002
  • Seupel, A., Kuna, M.
    A gradient-enhanced damage model motivated by engineering approaches to ductile failure of steels, International Journal of Damage Mechanics, (2019), DOI: 10.1177/1056789518823879
  • Seupel, A., Hütter, G., Kuna, M.
    On the identification and uniqueness of constitutive parameters for a non-local GTN-model, Engineering Fracture Mechanics, 2019, pp. 1-19, DOI: 10.1016/j.engfracmech.2019.106817
  • Turdimatov, M., Nam, A., Kawalla, R., Prahl, U.
    Modeling of Microstructural Evolution in the Hot Rolling Process of Fe-16Cr-4Mn-4Ni-0.05C-0.17N Austenitic Stainless Steel, Materials Science Forum, 949 (2019), pp. 93-100, ISSN: 1662-9752,
    DOI: 10.4028/www.scientific.net/MSF.949.93
     
  • Ullrich, C., Martin, S., Schimpf, C., Stark, A., Schell, N., Rafaja, D.
    Deformation Mechanisms in Metastable Austenitic TRIP/TWIP Steels under Compressive Load Studied by in situ Synchrotron Radiation Diffraction, Adv. Eng. Mater., 21 (2019) 5, pp. 1-9, DOI: 10.1002/adem.201801101
  • Weiß, A.
    Verfahren zur Herstellung eines hochfesten bzw. höchstfesten Formteils aus härtbarem Stahl, Patentschrift DE11 2014 004 087.8, 2019
  • Wendler, M., Hauser, M., Motylenko, M., Mola, J., Krüger, L., Volkova, O.
    Ultra High Strength Stainless Steels Obtained by Quenching-Deformation-Partitioning (QDP) Processing, Adv. Eng. Mater., 21 (2019) 5, pp. 1-12, DOI: 10.1002/adem.201800571
  • Weiß, A.
    Verfahren zur Herstellung eines hochfesten bzw. höchstfesten Formteils aus härtbarem Stahl, Patentschrift DE11 2014 004 087.8, 2019
  • Wolf, C. H., Henkel, S., Burgold, A., Qiu, Y., Kuna, M., Biermann, H.
    Fatigue Crack Growth in Austenitic Stainless Steel: Effects of Phase Shifted Loading and Crack Paths, Adv. Eng. Mater., 21 (2019) 5, pp. 1-12, DOI: 10.1002/adem.201800861
  • Wolf, C. H., Henkel, S., Burgold, A., Qiu, Y., Kuna, M., Biermann, H.
    Investigation of fatigue crack growth under in-phase loading as well as phase-shifted loading using cruciform specimens, International Journal of Fatigue, 124 (2019), pp. 595-614, DOI: 10.1016/j.ijfatigue.2019.03.011
  • Wolf, C. H., Burgold, A., Henkel, S., Kuna, M., Biermann, B.
    Cruciform specimens for the determination of crack growth behaviour in biaxial stress fields: calculation of K-factors, MATEC Web of Conferences, EDP Sciences, 300 (2019) 11008, pp. 1-9, DOI: 10.1051/matecconf/201930011008 

2018

  • Baumgart, C., Halle, T., Weigelt, C., Krüger, L., Aneziris, C. G.
    Effect of honeycomb cell geometry on compressive properties: Finite element analysis and experimental verification, Science and Technology of Materials, 30 (2018), pp. 35–42, DOI: 10.1016/j.stmat.2018.02.001
     
  • Baumgart, C., Weigelt, C., Aneziris, C. G., Krüger, L.
    Mechanical properties of high-density TRIP steel honeycomb structures with varying cell profiles under different loading conditions, EPJ Web of Conferences, 183 (2018), DYMAT 2018, pp. 1-6, DOI: 10.1051/epjconf/201818303014
     
  • Baumgart, C., Weigelt, C., Wendler, M., Saenko, I., Aneziris, C. G., Volkova, O., Krüger, L.
    Challenges in Pressureless Sintering of Interstitially Alloyed TRIP Steel and Resulting Mechanical Properties, Adv. Eng. Mater., (2018) 1800700, pp. 1-8, DOI: 10.1002/adem.201800700 
  • Berek, H., Aneziris, C. G.
    Effect of focused ion beam sample preparation on the phase composition of zirconia, Ceramics International, (2018), pp. 1-12, DOI: 10.1016/j.ceramint.2018.06.226
  • Borrmann, S., Asad, A., Halbauer, L., Buchwalder, A., Biermann, H., Schwarze, R.
    Numerical Simulation of the Particle Displacement during Electron Beam Welding of a Dissimilar Weld Joint with TRIP-Matrix-Composite, Adv. Eng. Mater., (2018) 1800741, pp. 1-9, DOI: 10.1002/adem.201800741
  • Burgold, A., Henkel, S., Roth, S., Kuna, M., Biermann, H.
    Fracture mechanics testing and crack growth simulation of highly ductile austenitic steel, Materials Testing, 60 (2018) 4, pp. 341-348, DOI 10.3139/120.111156, ISSN 0025-5300
  • Burgold, A., Henkel, S., Roth, S., Kuna, M., Biermann, H.
    Experimentelle und numerische Untersuchung eines hochduktilen austenitischen Gussstahles, In: 50. Tagung Arbeitskreis Bruchvorgänge, DVM-Bericht, 250 (2018), pp. 217-226, ISSN 2366-4797
  • Burgold, A., Roth, S., Kuna, M.
    Cohesive Zone Modeling of Stable Crack Propagation in Highly Ductile Steel, Key Engineering Materials, 774 (2018), pp. 167-172, ISSN: 1662-9795, DOI:10.4028/www.scientific.net/KEM.774.167
     
  • Droste, M., Ullrich, C., Motylenko, M., Fleischer, M., Weidner, A., Freudenberger, J., Rafaja, D., Biermann, H.
    Fatigue behavior of an ultrafine-grained metastable CrMnNi steel tested under total strain control, International Journal of Fatigue, 106 (2018), pp. 143–152, DOI: 10.1016/j.ijfatigue.2017.10.001
  • Droste, M., Günther, J., Kotzem, D., Walther, F., Niendorf, T., Biermann, H.
    Cyclic deformation behavior of a damage tolerant CrMnNi TRIP steel produced by electron beam melting, International Journal of Fatigue, 114 (2018), pp. 262-271, DOI: 10.1016/j.ijfatigue.2018.05.031
  • Droste, M., Wendler, M., Volkova, O., Biermann, H.
    Cyclic Deformation Behavior of an Ultra-High Strength Austenitic-Martensitic Steel Treated by Novel Q&P Processing, Adv. Eng. Mater., (2018) 1800732, pp. 1-10, DOI: 10.1002/adem.201800732
  • Eckner, R., Krüger, L., Motylenko, M., Savinykh, A. S., Razorenov, S. V., Garkushin, G. V.
    Deformation mechanisms and microplasticity of austenitic TRIP/TWIP steel under flyer plate impact, EPJ Web of Conferences, 183 (2018), DYMAT 2018, pp. 1-6, DOI: 10.1051/epjconf/201818303007
     
  • Ehinger, D., Weise, J., Baumeister, J., Funk, A., Waske, A., Krüger, L., Martin, U.
    Microstructure and Deformation Response of TRIP-Steel Syntactic Foams to Quasi-Static and Dynamic Compressive Loads, Materials, 656 (2018) 11, pp. 1-22, DOI:10.3390/ma11050656 
  • Güler, S., Schymura, M., Fischer, A., Droste, M., Biermann, H.
    The influence of the nitrogen/nickel-ratio on the cyclic behavior of austenitic high strength steels with twinning-induced plasticity and transformation-induced plasticity effects, Mat.-wiss. u. Werkstofftech., 49 (2018), pp. 61–72, DOI: 10.1002/mawe.201700107
  • Günther, J., Brenne, F., Droste, M., Wendler, M., Volkova, O., Biermann, H., Niendorf, T.
    Design of novel materials for additive manufacturing - Isotropic microstructure and high defect tolerance, Scientific Reports, (2018), pp. 1-14, DOI:10.1038/s41598-018-19376-0
  • Halbauer, L., Proksch, P., Buchwalder, A., Zenker, R., Biermann, H.
    Joining of TWIP-matrix composites by electron beam brazing, Weld World, 62 (2018), pp. 19-27 
  • Halbauer, L., Laubstein, R., Radajewski, M., Buchwalder, A., Krüger, L., Biermann, H.
    Electron Beam Welding and Characterization of Dissimilar Joints with TWIP Matrix Composites, Adv. Eng. Mater., (2018) 1800586, pp. 1-10, DOI: 10.1002/adem.201800586
  • Hauser, M., Wendler, M., Weiß, A., Volkova, O., Mola, J.
    On the Critical Driving Force for Deformation-Induced α'-Martensite Formation in Austenitic Cr–Mn–Ni Steels, Adv. Eng. Mater., (2018) 1800676, pp. 1-6, DOI: 10.1002/adem.201800676
  • Henkel, S., Wolf, C. H., Biermann, H.
    Cruciform specimens as a tool to investigate fatigue crack growth behavior of metals, Proceedings of the 6th International Conference on CRACK PATHS, Conference USB flash drive, 2018, pp. 311-316
  • Kietov, V., Mandel, M., Krüger, L. 
    Combination of Electrochemical Noise and Acoustic Emission for Analysis of the Pitting Corrosion Behavior of an Austenitic Stainless Cast Steel, Adv. Eng. Mater., (2018) 1800682, pp. 1-6, DOI: 10.1002/adem.201800682
  • Korobeinikov, I., Perminov, A., Heller, H.-P., Volkova, O.
    Inert Gas Atomization of High-Nitrogen TRIP-Steels, Adv. Eng. Mater., (2018) 1800753, pp. 1-7, DOI: 10.1002/adem.201800753
  • Krause, D., Eckner, R., Krüger, L. 
    Influence of Work-Hardening and Lower Temperatures on the Yield Stress of Austenitic Stainless Steel X2CrNi18-10 under Combined Tension-Torsion Loading, Adv. Eng. Mater., (2018) 800663, pp. 1-8, DOI: 10.1002/adem.201800663
  • Linderov, M. L., Segel, C., Weidner, A., Biermann, B., Vinogradov, A. Yu. Study of Deformation Phenomena in TRIP/TWIP Steels by Acoustic Emission and Scanning Electron Microscopy, PHYSICS OF METALS AND METALLOGRAPHY, 119 (2018) 4, pp. 388-395, ISSN 0031-918X Mirzajanzadeh, M., Canadinc, D., Niendorf, T., Weidner, A.A Novel Approach for Monitoring Plastic Flow Localization during In-Situ Sem Testing of Small-Scale Samples, Exp Tech, (2018) 42, pp. 177–189, DOI 10.1007/s40799-017-0212-3 
  • Nam, A., Turdimatov, M., Kawalla, R., Prahl, U.
    The Kinetics of Dynamic Recrystallization of Fe–16Cr–xMn–4Ni–0.05C–0.17N Steel, steel research int., (2018) 1800309; pp. 1-7, DOI: 10.1002/srin.201800309 Nam, A., Turdimatov, M., Kawalla, R., Prahl, U.
    Inter-Pass Softening Behavior of Fe–16Cr–xMn–4Ni–0.05C–0.17N Steel, Adv. Eng. Mater., (2018) 1800692, pp. 1-8, DOI: 10.1002/adem.201800692
  • Oppelt, M., Leißner, T., Berek, H., Baumgart, C., Krüger, L., Peuker, U., Aneziris, C. G.
    Processing and Characterization of Beads with Graded Layer Compositions Based on Zirconia and TRIP-Steel, Adv. Eng. Mater., (2018) 201800615, pp. 1-9, DOI: 10.1002/adem.201800615
  • Radajewski, M., Eckner, R., Decker, S., Wendler, M., Krüger, L.
    Influence of Temperature and Strain Rate during Thermomechanical Treatment of a Metastable Austenitic TRIP Steel Compacted by SPS/FAST, Adv. Eng. Mater., (2018) 1800617, pp. 1-9, DOI: 10.1002/adem.201800617
  • Saenko, I., Ilatovskaia, M., Savinykh, G., Fabrichnaya, O.
    Experimental investigation of phase relations and thermodynamic properties in the ZrO2–TiO2 system, Journal of American Ceramic Society, 101 (2018), 386-399. DOI: 10.1111/jace.15176
  • Saenko, I., Tsukrenko, V., Ilatovskaia, M., Pavlyuchkov, D., Savinykh, G., Fabrichnaya, O.
    Experimental Investigation of Phase Equilibria in the ZrO2–TiO2–MgO System, Adv. Eng. Mater., (2018) 1800655, pp. 1-17, DOI: 10.1002/adem.201800655
  • Sandig, E. F., Hauser, M., Wendler, M., Prutchykova, V. V., Weiß, A.Magnetic measurement of strain-induced martensite formation in Fe–30Nisteel, Materials Science and Technology, pp. 1-9, DOI: 10.1080/02670836.2018.1465507
  • Schröder, C., Weiß, A., Volkova, O. Development of a new stainless austenitic CrMnNi steel using TRIP/TWIP effect for a high cold formability, Materialwiss. Werkstofftech., (2018) 49, pp. 577–590, DOI 10.1002/mawe.201700278
  • Seupel, A., Hütter, G., Kuna, M.
    An efficient FE-implementation of implicit gradient-enhanced damage models to simulate ductile failure, Engineering Fracture Mechanics, (2018), DOI: https://doi.org/10.1016/j.engfracmech.2018.01.022
  • Ullrich, C., Martin, S., Schimpf, C., Stark, A., Schell, N., Rafaja, D. 
    Deformation Mechanisms in Metastable Austenitic TRIP/TWIP Steels under Compressive Load Studied by in situ Synchrotron Radiation Diffraction, Adv. Eng. Mater., (2018) 1801101, pp. 1-9, DOI: 10.1002/adem.201801101 
  • Wendler, M., Hauser, M., Sandig, E. F., Volkova, O. Estimation of the Temperature-Dependent Nitrogen Solubility in Stainless Fe-Cr-Mn-Ni-Si-C Steel Melts During Processing, METALLURGICAL AND MATERIALS TRANSACTIONS B, (2017), DOI: 10.1007/s11663-017-1165-8
  • Wendler, M., Eckner, R., Baumgart, C., Biermann, C., Oppelt, M., Weigelt, C., Michel, P.
    Leichtbau durch Verbundwerkstoffe, dialog - Materialwissenschaft und Werkstofftechnik, 1 (2018), pp. 90-97, Hrsg.: DGM Deutsche Gesellschaft für Materialkunde e.V., Dr.-Ing. Frank O. R. Fischer, ALPHA Informationsgesellschaft mbH, ISSN 2193-3383
  • Wendler, M., Hauser, M., Motylenko, M., Mola, J., Krüger, L., Volkova, O.
    Ultra High Strength Stainless Steels Obtained by Quenching-Deformation-Partitioning (QDP) Processing, Adv. Eng. Mater., (2018) 1800571, pp. 1-12, DOI: 10.1002/adem.201800571
  • Wolf, C. H., Henkel, S., Qiu, Y., Ackermann, S., Biermann, H., Burgold, A., Kuna, M.
    Fatigue crack growth under in-phase loading as well as 180°  phase-shifted loading of austenitic stainless steel, Proceedings of the 6th International Conference on CRACK PATHS, Conference USB flash drive, 2018, pp. 341-346 
  • Wolf, C. H., Henkel, S., Burgold, A., Qiu, Y., Kuna, M., Biermann, H.
    Fatigue Crack Growth in Austenitic Stainless Steel: Effects of Phase Shifted Loading and Crack Paths, Adv. Eng. Mater., (2018) 1800861, pp. 1-12, DOI: 10.1002/adem.201800861 
     

2017

  • Aneziris, C., Scheller, P., Biermann, H. 
    Verbundwerkstoff aus Metall und Keramik, Verfahren zu dessen Herstellung, seine Verwendung sowie Energieabsorptionsbauteil, Patentschrift DE 11 2007 000 923 B4, Deutsches Patent- und Markenamt, München, 2017
  • Biermann, H., Michel, P., Jahn, A., Wendler, M., Kirmse, C., Weigelt, C., Hauser, M., Yanina, A., Decker, S., Oppelt, M., Saenko, I., Pranke, K., Weider, M., Acker, R., Klostermann, J., Buchwalder, A., Ullrich, C., Prüger, S., Martin, S., Glage, A., Weidner, A., Mantel, M.
    Visionen aus Stahl und Keramik, ACAMONTA, 24 (2017), S. 17-32, Hrsg.: Freunde und Förderer der TU Bergakademie Freiberg e. V., Rektor der TU Bergakademie Freiberg, ISSN: 2193-309X
  • Decker, S., Krüger, L. 
    Mechanical properties of a CrMnNi steel/Mg-PSZ-FGM processed by asymmetric Spark Plasma Sintering, Materials and Design, 115 (2017), pp. 8-16, DOI: 10.1016/j.matdes.2016.11.046
  • Decker, S., Krüger, L.
    Dynamic flow stress behavior of a 5 vol.% Mg-PSZ reinforced TRIP matrix composite at ambient temperature and −40 °C, Materials and Design, 114 (2017), pp. 47–54, DOI: 10.1016/j.matdes.2016.10.045
  • Dilner, D., Pavlyuchkov, D., Zienert, T., Kjellqvist, L., Fabrichnaya, O.
    Thermodynamics of the Mg-Mn-O system—modeling and heat capacity measurements, J. Am. Ceram. Soc., 2017, pp. 1-12, DOI: 10.1111/jace.14686
  • Droste, M., Ullrich, C., Motylenko, M., Fleischer, M., Weidner, A., Freudenberger, J., Rafaja, D., Biermann, H.
    Fatigue behavior of an ultrafine-grained metastable CrMnNi steel tested under total strain control, International Journal of Fatigue, 106 (2018), pp. 143–152, DOI: 10.1016/j.ijfatigue.2017.10.001 
  • Eckner, R., Krüger, L. 
    High strain rate compression testing of hot-pressed TRIP/TWIP-Matrix-Composites, Key Engineering Materials 742 (2017), S. 113-120, DOI: 10.4028/www.scientific.net/KEM.742.113 
  • Härtel, M., Pfeiffer, S., Schmaltz, S., Söhngen, B., Kulawinski, D., Willner, K., Henkel, S., Biermann, H., Wagner, M. F.-X.
    On the identification of an effective cross section for a cruciform specimen, Strain, (2017) e12257, pp. 1-12, DOI:10.1111/str.12257
  • Mandel, M., Kietov, V., Dubberstein, T., Krüger, L.
    The Potentiodynamic Polarisation of a High-Alloy Steel—An Analysis by Acoustic Emission Testing and Long-Distance Microscopy, Electrochimica Acta, 240 (2017), pp. 350–360, DOI: 10.1016/j.electacta.2017.04.091
  • Martin, S., Reichel, B., Motylenko, M., Ullrich, C., Wendler, M., Hauser, M., Mola, J., Rafaja, D.
    The influence of interstitial solid solution strengthening and (V, Cr)N precipitation on work hardening in metastable austenitic CrMnNi TRIP steels, Proceedings of the 38th Ris0 International Symposium on Materials Science, pp. 330-340, 2017, Roskilde Denmark, Hrsg.: S. Dhar, S. Fcester, A. Godfrey, N. Hansen, C. Hong, X. Huang, D. Juul Jensen, O. V. Mishin, T. Yu, Y. Zhang, Department of Wind Energy Technical University of Denmark, ISBN 978-87-93549-17-3, ISSN 0907-0079
  • Michel, P.
    Stahl-Keramik-Verbundwerkstoffe, Ingenieurnachrichten, 06 (2017), S. 27 
  • Mirzajanzadeh, M., Canadinc, D., Niendorf, T., Weidner, A.
    A Novel Approach for Monitoring Plastic Flow Localization during In-Situ Sem Testing of Small-Scale Samples, Exp Tech, 2017, DOI: 10.1007/s40799-017-
    0212-3 
  • Mola, J.
    Considerations in the Design of Formable Austenitic Stainless Steels Based on Deformation-Induced Processes, in: Austenitic Stainless Steels - New Aspects, 2017, pp. 7-28, InTech, DOI: 10.5772/intechopen.70939
     
  • Seupel, A., Kuna, M.
    Phenomenological modeling of strain hardening, phase transformation and damage effects of TRIP-steels, XIV International Conference on Computational Plasticity. Fundamentals and Applications. COMPLAS XIV. 2017, pp. 576-587, ISBN: 978-84-946909-6-9 
  • Tuchscheerer, F., Krüger, L. 
    Influence of Cold Deformation and Phase Transformation on the Electrochemical Corrosion Behavior of Nitrogen-Alloyed Stainless Steel in Chloride Solution, steel research int., 87 (2017) 5, DOI: 10.1002/srin.201600510
  • Ullrich, C., Martin, S., Schimpf, C., Stark, A., Schell, N., Rafaja, D.
    In-situ synchrotron radiation studies of the deformation mechanisms in metastable austenitic TRIP/TWIP steels, Advanced Metallic Materials by Microstructural Design - Proceedings of the 38th Ris0 International Symposium on Materials Science, pp. 399-406, 2017, Roskilde, Denmark, Hrsg.: S. Dhar, S. Fcester, A. Godfrey, N. Hansen, C. Hong, X. Huang, D. Juul Jensen, O. V. Mishin, T. Yu, Y. Zhang, Department of Wind Energy Technical University of Denmark, ISBN 978-87-93549-17-3, ISSN 0907-0079
  • Wendler, M., Ullrich, C., Hauser, M., Krüger, L., Volkova, O., Weiß, A., Mola, J. 
    Quenching and partitioning (Q&P) processing of fully austenitic stainless steels, Acta Materialia, 133 (2017), pp. 346-355, DOI: 10.1016/j.actamat.2017.05.049
  • Wendler, M., Hauser, M., Weiss, A., Volkova, O., Krüger, L., Mola, J.
    Ultrahochfeste CrMnNi-C-N-Stahlgusslegierungen mit erhöhter Plastizität, 24.Sächsische Fachtagung für Umformtechnik: Werkstoffe und Komponenten für den Fahrzeugbau, 2017, Freiberg, Hrsg.: TU Bergakademie Freiberg, Institut für Metallformung,  ACATRAIN e.V., S. 56-63
  • Wendler, M., Michel, P.
    Von hochduktil bis ultrahochfest – neue austenitische CrMnNi-Stähle des SFB 799, Dresdner Transferbrief, 25 (2017) 02, S. 32

     

2016

  • Ackermann, S., Martin, S., Schwarz, M. R., Schimpf, C., Kulawinski, D., Lathe, C., Henkel, S., Rafaja, D., Biermann, H., Weidner, A.
    Investigation of Phase Transformations in High-Alloy Austenitic TRIP Steel Under High Pressure (up to 18 GPa) by In Situ Synchrotron X-ray Diffraction and Scanning Electron Microscopy, Met. Mat. Trans. A, 47 (2016), pp. 95-111, DOI: 10.1007/s11661-015-3082-2
  • Ackermann, S., Glage, A., Henkel, S., Biermann, H.
    Ermüdungsverhalten von metastabilen austenitischen Stählen unter ein- und zweiachsiger Beanspruchung, in: Jubiläumsband "Glanzlichter der Forschung an der Technischen Universität Bergakademie Freiberg“, Chemnitzer Verlag, Hrsg.: Groß, U., TU Bergakademie Freiberg, 2016, S. 226-236, ISBN: 978-3-944509-26-6
  • Asad, A., Kratzsch, C., Schwarze, R.
    Numerical Investigation of the Free Surface in a Model Mold, steel research int., 87 (2016) 2, pp. 181-190, DOI: 10.1002/srin.201400600
  • Baumgart, C., Ehinger, D., Weigelt, C., Krüger, L., Aneziris, C. G.
    Comparative study of TRIP/TWIP assisted high density composite honeycomb structures under compressive load, Composite Structures, 136 (2016), pp. 297–304, DOI: 10.1016/j.compstruct.2015.09.053
  • Baumgart, C., Weigelt, C., Krüger, L., Aneziris, C. G.
    Investigations on the sintering response of steel-ceramic Composites, Materials Science and Engineering, 139 (2016) 012013, DOI: 10.1088/1757-899X/139/1/012013
  • Biermann, H., Glage, A., Droste, M.
    Influence of Temperature on Fatigue-Induced Martensitic Phase Transformation in a Metastable CrMnNi-Steel, Met. Mat. Trans. A, 47 (2016), pp. 84-94, DOI: 10.1007/s11661-014-2723-1
  • Biermann, H., Aneziris, C. G.
    Foreword CRC 799 Contribution, Met. Mat. Trans. A, 47 (2016), p. 48
  • Chaves, H., Kirmse, C., Heller, H.-P., Dubberstein, T.
    Vorrichtung und Verfahren zum Zerstäuben von Schmelzen, Offenlegungsschrift DE 10 2015107 876A1 2016.11.24, 2016, Hrsg.: Deutsches Patent- und Markenamt
  • Chebykin, D., Dubberstein, T., Heller, H.-P., Volkova, O.
    Viscosity of iron and iron base alloys at high temperatures, Freiberger Forschungshefte, Metallurgisches Kolloquium zu Ehren von Prof. Dieter Janke, 67. Berg- und Hütten­männischer Tag 2016, S. 124-130, Hrsg.: Olena Volkova, TU Bergakademie Freiberg, ISBN 978-3-86012-530-4
  • Decker, S., Martin, S., Krüger, L.
    Influence of Powder Particle Size on the Compaction Behavior and Mechanical Properties of a High-Alloy Austenitic CrMnNi TRIP Steel During Spark Plasma Sintering, Met. Mat. Trans. A, 47 (2016), pp. 170-177, DOI: 10.1007/s11661-015-2861-0
  • Decker, S., Krüger, L.
    Improved mechanical properties by high-energy milling and Spark Plasma Sintering of a TRIP-matrix composite, Journal of Composite Materials, 50 (2016) 13, pp. 1829–1836, DOI: 10.1177/0021998315597482
  • Dubberstein, T., Schürmann, M., Heller, H.-P., Chaves, H.
    Verfahren zur Bestimmung der Viskosität von Fluiden im Hochtemperaturbereich mittels eines Vibrationskörperviskosimeters und zugehöriges Vibrationviskosimeters, Patentschrift DE 10 2014 015 301 B3 vom 25.02.2016
  • Dubberstein, T., Chebykin, D., Heller, H.-P., Volkova, O.
    Thermophysical Properties of Cr-Mn-Ni Steel Relevant to Powder Metallurgy, Freiberger Forschungshefte, Metallur­gisches Kolloquium zu Ehren von Prof. Dieter Janke, 67. Berg- und Hüttenmännischer Tag 2016, S. 33-41, Hrsg.: Olena Volkova, TU Bergakademie Freiberg, ISBN 978-3-86012-530-4
  • Dubberstein, T., Schürmann, M., Chaves, H., Heller, H.-P. Aneziris, C. G.
    A Novel Vibrating Finger Viscometer for High-Temperature Measurements in Liquid Metals and Alloys, Int. J. Thermophys., 37 (2016), pp. 1–12, doi: 10.1007/s10765-016-2104-7
  • Eckner, R., Reichel, B., Savinykh, A. S., Krüger, L., Razorenov, S. V., Garkushin, G. V.
    Microstructure of CrMnNi Cast Steel After Explosive-Driven Flyer-Plate Impact at Room Temperature and Below, Met. Mat. Trans. A, 47 (2016), pp. 75-83, DOI: 10.1007/s11661-015-3222-8
  • Eckner, R., Krampf, M., Segel, C., Krüger, L.
    Strength and fracture behavior of a particle-reinforced transformation-thoughened TRIP steel/ZrO2 composite, Mechanics of Composite Materials, 51 (2016) 6, pp. 707-720, DOI: 10.1007/s11029-016-9541-z
  • Eckner, R., Krüger, L., Ullrich, C., Rafaja, D., Schlothauer, T., Heide, G. Microstructure and Mechanical Properties After Shock Wave Loading of Cast CrMnNi TRIP Steel, Metallurgical and Materials Transactions A, 2016, DOI: 10.1007/s11661-016-3688-z, ISSN: 1073-5623
  • Fabrichnaya, O., Pavlyuchkov, D.
    Assessment of Experimental Data and Thermodynamic Modeling in the Zr-Fe-O System, Met. Mat. Trans. A., 47 (2016), pp. 152-159, DOI: 10.1007/s11661-015-2805-8
  • Fabrichnaya, O., Ullrich, C., Wendler, M., Savinykh, G., Rafaja, D.
    High-temperature phase transformations in strongly metastable austenitic-martensitic CrMnNi N C cast steels, Journal of Alloys and Compounds, 2016, DOI: 10.1016/j.jallcom.2016.06.026
  • Halbauer, L., Buchwalder, A., Zenker, R., Biermann, H.
    The influence of dilution on dissimilar weld joints with high-alloy TRIP/TWIP steels, Welding in the World, ISSN: 0043-2288, DOI: 10.1007/s40194-016-0324-x
  • Halbauer, L., Eckner, R., Wendler, M., Fabrichnaya, O., Buchwalder, A., Krüger, L., Zenker, R., Biermann, H.
    Tensile Behavior of Cast and Electron Beam Welded Interstitially Strengthened High-Alloy TRIP Steel, steel research int., 87 (2016), DOI: 10.1002/srin.201600028
  • Hauser, M., Wendler, M., Weiß, A., Volkova, O., Mola, J.
    Temperature dependent mechanical properties and defor­mation mechanisms of an austenitic Fe-Cr-Mn-Ni-C-N steel with TRIP/TWIP effect, Freiberger Forschungshefte, Metallur­gisches Kolloquium zu Ehren von Prof. Dieter Janke, 67. Berg- und Hüttenmännischer Tag 2016, S. 26-31, Hrsg.: Olena Volkova, TU Bergakademie Freiberg, ISBN 978-3-86012-530-4
  • Hauser, M., Wendler, M., Fabrichnaya, O., Volkova, O., Mola, J.
    Anomalous stabilization of austenitic stainless Steels at cryogenic temperatures, Materials Science & Engineering A, 675 (2016), pp. 415-420, DOI: 10.1016/j.msea.2016.08.080
  • Heinze, D., Buchwalder, A., Jung, A., Weidner, A., Segel, C., Müller, A., Zenker, R., Biermann, H.
    Functionally Graded High-Alloy CrMnNi TRIP Steel Produced by Local Heat Treatment Using High-Energy Electron Beam, Met. Mat. Trans. A, 47 (2016), pp. 123-138, DOI: 10.1007/s11661-015-3017-y
  • Kirmse, C., Chaves, H.
    Measurements of the Velocity of Drops in a Melt Atomization Process Using Particle Image Velocimetry, steel research int., 87 (2016) 10, pp. 1295-1301, DOI: 10.1002/srin.201500360
  • Krüger, L., Ehinger, D., Henschel, S.
    Festigkeits-, Verformungs- und Versagensverhalten ausgewählter Werkstoffe bei unterschiedlichen Beanspruchungsgeschwindigkeiten, in: Glanzlichter der Forschung an der TU Bergakademie Freiberg 250 Jahre nach ihrer Gründung, Chemnitzer Verlag, Freiberg, 2016, Hrsg.: Ulrich Groß, TU Bergakademie Freiberg, S. 55-63, ISBN: 978-3-944509-26-6
  • Mandel, M., Böhme, F., Hauser, M., Wendler, M., Tuchscheerer, F., Krüger, L.
    The Influence of Plastic Deformation on the Corrosion Behavior of a Cast High-Alloy CrMnNi TRIP Steel, steel research int., 87 (2016), DOI: 10.1002/srin.201500406
  • Mandel, M., Kietov, W., Krüger, L.
    Corrosion monitoring of the active/passive/transpassive state of a high-alloy CrMnNi steel by means of acoustic emissions, Defect and Diffusion Forum, 367 (2016), pp. 42-51, ISSN: 1662-9507,
    DOI: 10.4028/www.scientific.net/DDF.367.42
  • Mandel, M., Hoffmann, J., Halbauer, L., Krüger, L., Buchwalder, A.,
    Zenker, R.

    Electrochemical degradation behaviour and FEM analysis of an electron beam-welded steel cast alloy in sodium chloride and in sulphuric acid solution, conference proceedings, EUROCORR 2016, Montpellier, Editor: Les Editions d’Astorg, PRINTCORP, Paris
  • Martin, S., Wolf, S., Martin, U., Krüger, L., Rafaja, D.
    Deformation Mechanisms in Austenitic TRIP/TWIP Steel as a Function of Temperature, Met. Mat. Trans. A, 47 (2016), pp. 49-58, DOI: 10.1007/s11661-014-2684-4
  • Mola, J.
    Design of high-interstitial stainless steels with austenitic and martensitic austenitic microstructures, Freiberger Forschungshefte, Metallurgisches Kolloquium zu Ehren von Prof. Dieter Janke, 67. Berg- und Hütten­männi­scher Tag 2016, S. 57-69, Hrsg.: Olena Volkova, TU Bergakademie Freiberg, ISBN 978-3-86012-530-4
  • Müller, A., Segel, C., Linderov, M., Vinogradov, A., Weidner, A., Biermann, H.
    The Portevin–Le Châtelier Effect in a Metastable Austenitic Stainless Steel, Met. Mat. Trans. A, 47 (2016), pp. 59-74, DOI: 10.1007/s11661-015-2953-x
  • Pavlyuchkov, D., Dilner, D., Savinykh, G., Fabrichnaya, O.
    Phase Equilibria in the ZrO2–MgO–MnOx System, J. Am. Ceram. Soc., 99 (2016) 9, pp. 3136–3145, DOI: 10.1111/jace.14327
  • Sandig, E. F., Hauser, M., Volkova, O., Weiß, A.
    Untersuchung der verformungsinduzierten Martensitbildung in einem hoch legierten Stahl mit 30% Nickel, Freiberger Forschungshefte, Metallurgisches Kolloquium zu Ehren von Prof. Dieter Janke, 67. Berg- und Hüttenmännischer Tag 2016, S. 131-138, Hrsg.: Olena Volkova, TU Bergakademie Freiberg, ISBN 978-3-86012-530-4
  • Schröder, C., Weiß, A.
    Industrielle Fertigung von Feinband aus einem neu entwickelten korrosionsbeständigen CrMnNi-Stahl mit TRIP/TWIP-Effekt, Freiberger Forschungshefte, Metallurgisches Kolloquium zu Ehren von Prof. Dieter Janke, 67. Berg- und Hüttenmännischer Tag 2016, S. 43-55, Hrsg.: Olena Volkova, TU Bergakademie Freiberg, ISBN 978-3-86012-530-4
  • Seupel, A., Eckner, R., Burgold, A., Kuna, M., Krüger, L.
    Experimental characterization and damage modeling of a particle reinforced TWIP-steel matrix composite, Materials Science & Engineering A, 662 (2016), pp. 342–355,
    DOI: 10.1016/j.msea.2016.03.056
  • Ullrich, C., Eckner, R., Krüger, L., Martin, S., Klemm, V., Rafaja, D.
    Interplay of microstructure defects in austenitic steel with medium stacking fault energy, Materials Science & Engineering A, 649 (2016), pp. 390-399, DOI: 10.1016/j.msea.2015.10.021
  • Weigelt, C., Aneziris, C. G., Eckner, R., Krüger, L.: TRIP Steel/Zirconia Composite Materials for Advanced Load Applications, Conference Proceedings, World PM2016, Hamburg
  • Weigelt, C., Schmidt, G., Aneziris, C. G., Eckner, R., Ehinger, D., Krüger, L.: Ullrich, C.; Rafaja, D.: Compressive and tensile deformation behaviour of TRIP steel-matrix composite materials with reinforcing additions of zirconia and/or aluminium titanate, Journal of Alloys and Compounds, (2016,
    DOI 10.1016/j.jallcom.2016.10.176
  • Weiß, A., Gutte, H., Mola, J.
    Contributions of
    ε and α′ TRIP Effects to the Strength and Ductility of AISI 304 (X5CrNi18-10) Austenitic Stainless Steel, Met. Mat. Trans. A, 47 (2016), pp. 112-122, DOI: 10.1007/s11661-014-2726-y
  • Weiß, A., Wendler, M.
    Hochfeste und gleichzeitig zähe Halbzeuge und Bauteile aus hochlegiertem Stahl, Verfahren zu ihrer Herstellung und Verwendung, Veröffentlichungsschrift zum internationalen Patent WO2016/020519 A1
  • Wendler, M., Reichel, B., Eckner, R., Fabrichnaya, O., Krüger, L., Weiß, A., Mola, J.
    Effect of Vanadium Nitride Precipitation on Martensitic Transformation and Mechanical Properties of CrMnNi Cast Austenitic Steels, Met. Mat. Trans. A, 47 (2016), pp. 139-151, DOI: 10.1007/s11661-014-2716-0
  • Wendler, M., Hauser, M., Eckner, R., Weiß, A., Volkova, O., Mola, J.
    Design neuartiger ultrahochfester CrMnNi-C-N-Stahlgusslegierungen mit erhöhter Plastizität, Freiberger Forschungshefte, Metallurgisches Kolloquium zu Ehren von Prof. Dieter Janke, 67. Berg- und Hüttenmännischer Tag 2016, S. 17-25, Hrsg.: Olena Volkova, TU Bergakademie Freiberg, ISBN 978-3-86012-530-4
  • Wenzel, C., Aneziris, C. G., Pranke, K.
    Metal-Matrix Composites Prepared by Paper-Manufacturing Technology, Met. Mat. Trans. A, 47 (2016) pp. 160-169, DOI: 10.1007/s11661-015-2819-2


2015

  • Acker, R., Weider, M.
    Herstellung von Metal-Matrix-Composites im Vakuum-Druckinfiltrationsofen, Giesserei-Praxis, (2015) 3, S. 90-92
  • Ackermann, S., Lippmann, T., Henkel, S., Biermann. H.
    Biaxial fatigue behavior of a powder metallurgical TRIP steel, Frattura ed Integrità Strutturale, 34 (2015) pp. 580-589; DOI: 10.3221/IGF-ESIS.34.64
  • Aneziris, C. G., Dudczig. S., Weigelt, C.
    Verwendung eines duktilen Verbundwerkstoffes aus Metall und einer Titanverbindungen enthaltenden Keramik für Bauteile, die in direktem Kontakt mit Aluminiumschmelzen stehen, Empfangsbestätigung zur Patentanmeldung, AZ: DE 10 2014 019 422.1, 2015
  • Becker, H., Martin, S., Reichel, B., Decker, S., Krüger, L., Rafaja, D.
    Orientation dependence of the martensitic transformation in (Zr,Mg)O2 embedded in a TRIP steel matrix, International Conference on Martensitic Transformations, ICOMAT-2014, Mater. Today: Proc., 28 (2015), pp. S727-S730
  • Berek, H., Ballaschka, U., Aneziris, C. G., Losch, K., Schladitz, K.
    The correlation of local deformation and stress-assisted local phase transformations in MMC foams, Materials Characterization, 107 (2015), pp. 139-148, doi: 10.1016/j.matchar.2015.06.020
  • Biermann, H., Michel, P.
    SFB 799 – Die Hochzeit von Stahl und Keramik, 250 JAHRE TU Bergakademie Freiberg, 2015, S. 166-167
  • Burgold, A., Kuna, M.
    Beanspruchungsanalyse von Rissen in TRIP-Stählen und der Einfluss der Phasenumwandlung, DVM Bericht, 247 (2015), S. 209-218, ISSN 1616-4687
  • Burgold, A., Kuna, M., Prüger, S.
    Crack tip fields in ductile materials with martensitic phase transformation – A numerical 2D study, Engineering Fracture Mechanics, 138 (2015), pp. 169–184, http://dx.doi.org/10.1016/j.engfracmech.2015.03.002
  • Chaves, H., Kirmse, C., Heller, H.-P., Dubberstein, T.
    Vorrichtung und Verfahren zum Zerstäuben von Schmelzen, Patentanmeldung AZ 10 2015 107 876.7 DPMA (26.05.2015)