Veröffentlichungen

Inhalt


MEFORM-Konferenz

JahrKonferenz-Titel
2018Resource efficient materials and forming technologies
2017New developments in wire production and processing
2016Production and further processing of flat products
2015Light Metals – Forming Technologies and Further Processing
2014Production and Processing of Clad Materials and Metal Matrix Composites
2013Simulation von Umformprozessen
2012Werkstofftechnologie und Massivumformung
2011Werkstoffkennwerte für die Simulation von Umformprozessen
201080 Jahre Walzwerks- und Werkstofftechnologie in Freiberg
2009Herstellung und Weiterverarbeitung von Flachprodukten
2008Simulation von Umformprozessen
2007Innovation Draht
2006Herstellungs- und Verarbeitungstechnologien für Magnesium- und Aluminiumknetwerkstoffe
2005Neue Entwicklungen beim Gesenk- und Freiformschmieden
2004Technologie der Werkstoffverbundherstellung durch Umformen
200375 Jahre Metallformung in Freiberg
2002Herstellung von Stabstahl und Draht
2001Herstellung von Rohren und Profilen
2000Herstellung von Bändern und Blechen
1999Teilfertigung durch Umformen
1998Modellierung von Umformprozessen
1997On-line Qualitätsüberwachung und –kontrolle bei der Umformung
1996Schmierung bei den Prozessen der Warm- und Kaltumformung
1995Umformwerkzeuge – Beanspruchung und Verschleiß

2019

Amir H. Motaman, S.; Prahl, Ulrich: Microstructural constitutive model for polycrystal viscoplasticity in cold and warm regimes based on continuum dislocation dynamics, Journal of the Mechanics and Physics of Solids, DOI: 10.1016/j.jmps.2018.09.002 

Darvishi Kamachali, Reza; Schwarze, Christian; Lin, Mingxuan; Diehl, Martin; Shanthraj, Pratheek; Prahl, Ulrich; Steinbach, Ingo; Raabe, Dierk: Numerical Benchmark of Phase-Field Simulations with Elastic Strains: Precipitation in the Presence of Chemo-Mechanical Coupling, Computational Materials Science, DOI: 10.1016/j.commatsci.2018.09.011 

Farivar, H.; Deepu, M. J.; Hans, M.; Phanikumar, G.; Bleck, W.; Prahl, Ulrich: Influence of post-carburizing heat treatment on the core microstructural evolution and the resulting mechanical properties in case-hardened steel components, Materials Science and Engineering: A, DOI: 10.1016/j.msea.2018.12.061 

Farivar, H.; Prahl, Ulrich; Hans, M.; Bleck, W.: Microstructural adjustment of carburized steel components towards reducing the quenching-induced distortion, Journal of Materials Processing Technology, DOI: 10.1016/j.jmatprotec.2018.08.040

Hunkel, Martin; Kagathara, Jwalant; Prahl, Ulrich: The Influence of Segregations after Forming on the Heat Treatment Result of Bevel Gears, steel research int. (steel research international), DOI: 10.1002/srin.201800427 

Sheng, Zhendong; Altenbach, Christoph; Prahl, Ulrich; Zander, Daniela; Bleck, Wolfgang: Effect of cutting method on hydrogen embrittlement of high-Mn TWIP steel, Materials Science and Engineering: A, DOI: 10.1016/j.msea.2018.11.128

Ullmann, M.; Kittner, Kristina; Henseler, T.; Stöcker, A.; Prahl, Ulrich; Kawalla, R.: Development of new alloy systems and innovative processing technologies for the production of magnesium flat products with excellent property profile, Procedia Manufacturing, DOI: 10.1016/j.promfg.2018.12.065

 

2018 

Darvishi Kamachali, Reza; Schwarze, Christian; Lin, Mingxuan; Diehl, Martin; Shanthraj, Pratheek; Prahl, Ulrich; Steinbach, Ingo; Raabe, Dierk: Numerical Benchmark of Phase-Field Simulations with Elastic Strains: Precipitation in the Presence of Chemo-Mechanical Coupling, Computational Materials Science, DOI: 10.1016/j.commatsci.2018.09.011 

Kawalla, Rudolf; Stöcker, Anett; Prahl, Ulrich; Wei, Xuefei; Dierdorf, Jens; Hirt, Gerhard; Heller, Martin; Roggenbuck, Stefan; Korte-Kerzel, Sandra; Alois Weiss, Hannes; Tröber, Philipp; Böhm, Lucas; Volk, Wolfram; Leuning, Nora; Hameyer, Kay: Low-loss FeSi sheet for energy-efficient electrical drives, AIMS Materials Science, DOI: 10.3934/matersci.2018.6.1184

Li, Xiaoxiao; Ramazani, Ali; Prahl, Ulrich; Bleck, Wolfgang: Quantification of complex-phase steel microstructure by using combined EBSD and EPMA measurements, Materials Characterization, DOI: 10.1016/j.matchar.2018.05.038 

Madivala, Manjunatha; Schwedt, Alexander; Prahl, Ulrich; Bleck, Wolfgang: Anisotropy and strain rate effects on the failure behavior of TWIP steel: A multiscale experimental study, International Journal of Plasticity, DOI: 10.1016/j.ijplas.2018.11.015 

Madivala, Manjunatha; Schwedt, Alexander; Wong, Su Leen; Roters, Franz; Prahl, Ulrich; Bleck, Wolfgang: Temperature dependent strain hardening and fracture behavior of TWIP steel, International Journal of Plasticity, DOI: 10.1016/j.ijplas.2018.02.001 

Motaman, A. H.; Komerla, K.; Storms, T.; Prahl, Ulrich; Brecher, C.; Bleck, W.: Experimental and numerical investigation of dual phase steels formability during laser-assisted hole-flanging, DOI: 10.1063/1.5034894 

Qayyum, Faisal; Guk, Sergey; Kawalla, Rudolf; Prahl, Ulrich: Experimental Investigations and Multiscale Modeling to Study the Effect of Sulfur Content on Formability of 16MnCr5 Alloy Steel, steel research int. (steel research international), DOI: 10.1002/srin.201800369 

Rautenstrauch, Anja; Luft, Johannes; Birnbaum, Peter; Baumann, Markus; Ullmann, M.; Kräusel, Verena; Landgrebe, Dirk; Kawalla, Rudolf; Prahl, Ulrich: Improving the formability of magnesium by cushion-ram-pulsation, MATEC Web Conf. (MATEC Web of Conferences), DOI: 10.1051/matecconf/201819012003 

Santillana, Begoña; Paruchuri, Vamsi; Kripak, Viktor; Prahl, Ulrich; Horn, Carel ten: Assessment of Shell Strength During Solidification in the Mold Cracking Simulator (MCS) Test, Metallurgical and Materials Transactions A, DOI: 10.1007/s11661-018-4958-8 

Schneider, Jürgen; Franke, Armin; Stöcker, Anett; Kawalla, Rudolf: Quantification of the effect of texture on the magnetization behavior, Journal of Electrical Engineering, S. 458-460, DOI: 10.2478/jee-2018-0074 

Song, Wenwen; Prahl, Ulrich; Ma, Yan; Bleck, Wolfgang: Multiphase-Field Simulation of Cementite Precipitation during Isothermal Lower Bainitic Transformation, steel research int. (steel research international), DOI: 10.1002/srin.201800028 

Bleck, W.; Brecher, C.; Herty, M.; Hirt, G.; Hopmann, C.; Klocke, F.; Borchmann, N.; Dierdorf, J.; Farivar, H.; Fayek, P.; Häck, A.; Kripak, V.; Krömer, M.; Laschet, G.; Prahl, Ulrich; Rüngeler, M.; Schmitz, G. J.; Spekowius, M.; Springer, P.; Teixeira, A. M.: Integrated computational materials and production engineering (ICMPE), Integrative Production Technology: Theory and Applications, DOI: 10.1007/978-3-319-47452-6\textunderscore 

Farivar, H.; Richter, S.; Hans, M.; Schwedt, A.; Prahl, U.; Bleck, W. (2018): Experimental quantification of carbon gradients in martensite and its multi-scale effects in a DP steel. In: Materials Science and Engineering: A 718, S. 250–259. DOI: 10.1016/j.msea.2018.01.106.

Kawalla, Claudia; Teuber, Marie; Höck, Michael (2018): Empirical Examination of the Formation of Mechanical Properties of Heated Twin-Roll -Cast Magnesium Strips. In: Dmytro Orlov, Vineet Joshi, Kiran N. Solanki und Neale R. Neelameggham (Hg.): Magnesium Technology 2018. Cham: Springer International Publishing, S. 129–135. 

Kawalla, R.; Hermann, Harti; Stöcker, A.; Schneider, J. (2018): Research & Development of Non-Oriented Electrical Steel at the Institute of Metal Forming Freiberg - Technologies for Optimized Properties. In: WMM'18. 8th International Conference on Magnetism and Metallurgy : Dresden, Germany, June 12th to 14th, 2018 : proceedings. Freiberg: Universitätsverlag, S. 1–19.

Kawalla, R.; Stöcker, A.; Prahl, U.; Wei, X.; Dierdorf, J.; Hirt, G. et al. (2018): Low-loss FeSi sheet for energy-efficient electrical drives. In: AIMS Materials Science 5 (6), S. 1184-1198. DOI: 10.3934/matersci.2018.6.1184. www.aimspress.com/article/10.3934/matersci.2018.6.1184

Leuning, N.; Steentjes, Simon; Stöcker, A.; Kawalla, R.; Wei, X.; Dierdorf, J. et al. (2018): Impact of the interaction of material production and mechanical processing on the magnetic properties of non-oriented electrical steel. In: AIP Advances 8 (4), S. 47601. DOI: 10.1063/1.4994143. https://doi.org/10.1063/1.4994143

Moses, Marie; Kawalla, Claudia; Kawalla, R.; Höck, Michael (2018): Development of an Innovative and Quality-Focused Production Technology for Magnesium Wire. In: MSF 918, S. 34–39. DOI: 10.4028 www.scientific.net/MSF.918.34.

Nam, Alexander; Prüfert, Uwe; Pietrzyk, Maciej; Kawalla, Rudolf (2018): Coil model for magnesium alloy strips and its heat transfer analysis. In: Procedia Manufacturing 15, S. 185–192. DOI: 10.1016/j.promfg.2018.07.193.

Nam, Alexander; Turdimatov, Murodjon; Kawalla, Rudolf; Prahl, Ulrich (2018): Inter-Pass Softening Behavior of Fe-16Cr- x Mn-4Ni-0.05C-0.17N Steel. In: Advanced Engineering Materials 39, S. 1371. DOI: 10.1002/adem.201800692.

Neh, Kristina; Ullmann, Madlen; Kawalla, R. (2018): Mechanical Properties and Microstructure of the Magnesium Alloy Mg-6.8Y-2.5Zn-0.5Al Produced by Casting and Hot Rolling. In: MSF 918, S. 3–12. DOI: 10.4028 www.scientific.net/MSF.918.3.

Orlov, Dmytro; Joshi, Vineet; Solanki, Kiran N.; Neelameggham, Neale R. (Hg.) (2018): Magnesium Technology 2018. Cham: Springer International Publishing.

Schneider, J.; Stöcker, A.; Franke, A.; Kawalla, R. (2018): Effects by the microstructure after hot and cold rolling on the texture and grain size after final annealing of ferritic non-oriented FeSi electrical steel. In: AIP Advances 8 (4), S. 47606. DOI: 10.1063/1.4993526.

Song, Wenwen; Prahl, Ulrich; Ma, Yan; Bleck, Wolfgang (2018): Multiphase-Field Simulation of Cementite Precipitation during Isothermal Lower Bainitic Transformation. In: steel research int. 21, S. 1800028. DOI: 10.1002/srin.201800028.

Springer, P.; Prahl, U. (2018): Pinning effect of strain induced Nb(C,N) on case hardening steel under warm forging conditions. In: Journal of Materials Processing Technology 253, S. 121–133. DOI: 10.1016/j.jmatprotec.2017.11.008.

Technische Universität Bergakademie Freiberg (2018): WMM'18. 8th International Conference on Magnetism and Metallurgy : Dresden, Germany, June 12th to 14th, 2018 : proceedings. Freiberg: Universitätsverlag.

Wemme, H.; Moses, M.; Oswald, M.; Ullmann, M.; Kawalla, R.; Prahl, U. (2018): Anwendung des innovativen Gießwalzver-fahrens zur wirtschaftlichen Herstellung von Magnesium-Langprodukten. In: Tagungsband 10. Ranshofener Leichtmetalltage.

Wemme, Heike; Krbetschek, Christina; Ullmann, Madlen; Freigang, Anna; Plach, Stefan; Kawalla, R. (2018): Determination of the Hot Cracking Tendency of a Twin-Roll Cast AZ31 Magnesium Alloy by Means of Gleeble Tests. In: MSF 918, S. 40–47. DOI: 10.4028 www.scientific.net/MSF.918.40.

 

2017

Abouridouane, M.; Laschet, G.; Kripak, V.; Texeira, A.; Dierdorf, J.; Prahl, U.; Klocke, F. (2017): Cutting Simulations of Two Gear Steels with Microstructure Dependent Material Laws. In: Procedia CIRP 58. DOI: 10.1016/j.procir.2017.03.332.

Aryshensky, E. V. (2017): Study of texture evolution in aluminum low alloyed sheets during its hot rolling in industrial continuous mills. Dissertation. Technische Universität Bergakademie Freiberg, Freiberg. Institut für Metallformung.

Bleck, W.; Brecher, C.; Herty, M.; Hirt, G.; Hopmann, C.; Klocke, F. et al. (2017): Integrated computational materials and production engineering (ICMPE). In: Integrative Production Technology: Theory and Applications. DOI: 10.1007/978-3-319-47452-6.

Brecher, C.; Bleck, W.; Feldhusen, J.; Hirt, G.; Klocke, F.; Reisgen, U. et al. (2017): Multi-technology platforms (MTPs). In: Integrative Production Technology: Theory and Applications. DOI: 10.1007/978-3-319-47452-6.

Deepu, M. J.; Farivar, H.; Prahl, U.; Phanikumar, G. (2017): Microstructure based simulations for prediction of flow curves and selection of process parameters for inter-critical annealing in DP steel. In: IOP Conference Series: Materials Science and Engineering 192 (1). DOI: 10.1088/1757-899X/192/1/012010.

Farivar, H.; Rothenbucher, G.; Prahl, U.; Bernhardt, R. (2017): ICME-Based Process and Alloy Design for Vacuum Carburized Steel Components with High Potential of Reduced Distortion. In: Proceedings of the 4th World Congress on Integrated Computational Materials Engineering (ICME 2017): Springer, S. 133–144.

Haase, C.; Bültmann, J.; Hof, J.; Ziegler, S.; Bremen, S.; Hinke, C. et al. (2017): Exploiting process-related advantages of selective laser melting for the production of high-manganese steel. In: Materials 10 (1). DOI: 10.3390/ma10010056.

Henseler, Thorsten; Ullmann, Madlen; Kawalla, R.; Berge, Franz (2017): Influence of the Sheet Manufacturing Process on the Forming Limit Behaviour of Twin-Roll Cast, Rolled and Heat-Treated AZ31. In: KEM 746, S. 154–160. DOI: 10.4028 www.scientific.net/KEM.746.154.

Henseler, Thorsten; Ullmann, Madlen; Korpała, G.; Klimaszewska, K.; Kawalla, R.; Berge, Franz (2017): Influence of deformation controlled strain rate on tensile and compression behaviour of magnesium and steel wire. In: Materials Science Forum 892 MSF, S. 89–96. DOI: 10.4028 www.scientific.net/MSF.892.89.

Hüter, C.; Neugebauer, J.; Boussinot, G.; Svendsen, B.; Prahl, U.; Spatschek, R. (2017): Modelling of grain boundary dynamics using amplitude equations. In: Continuum Mechanics and Thermodynamics 29 (4), S. 895–911. DOI: 10.1007/s00161-015-0424-7.

Jain, Praveen Kumar; Lamirel, Jean-Charles; Babbar, Parveen (Hg.) (2017): Trends in bibliometrics and scientometrics studies. COLLNET Meeting. London, London: Athena Academic.

Jeschke, S.; Bleck, W.; Richert, A.; Schuh, G.; Schulz, W.; Ziefle, M. et al. (2017): Scientific cooperation engineering. In: Integrative Production Technology: Theory and Applications. DOI: 10.1007/978-3-319-47452-6.

John, D. M.; Farivar, H.; Rothenbucher, G.; Kumar, R.; Zagade, P.; Khan, D. et al. (2017): An Attempt to integrate Software Tools at Microscale and above towards an ICME Approach for Heat Treatment of a DP Steel Gear with Reduced Distortion. In: Proceedings of the 4th World Congress on Integrated Computational Materials Engineering (ICME 2017): Springer, S. 3–13.

Komerla, K.; Naumov, A.; Mertin, C.; Prahl, U.; Bleck, W. (2017): Investigation of microstructure and mechanical properties of friction stir welded AA6016-T4 and DC04 alloy joints. In: International Journal of Advanced Manufacturing Technology, S. 1–11. DOI: 10.1007/s00170-017-1022-6.

Korpała, G.; Hoffmann, Frank; Kawalla, R. (2017): Development of a procedure for low-temperature testing of wire materials and basic research into the behaviour of materials in the temperature range of -50 to -80 °C. In: Materials Science Forum 892 MSF, S. 82–88. DOI: 10.4028 www.scientific.net/MSF.892.82.

Korpała, G.; Ullmann, M.; Graf, M.; Wester, H.; Bouguecha, A.; Awiszus, B. et al. (2017): Modelling the influence of carbon content on material behavior during forging. In:. PROCEEDINGS OF THE INTERNATIONAL CONFERENCE OF GLOBAL NETWORK FOR INNOVATIVE TECHNOLOGY AND AWAM INTERNATIONAL CONFERENCE IN CIVIL ENGINEERING (IGNITE-AICCE’17): Sustainable Technology And Practice For Infrastructure and Community Resilience. Penang, Malaysia, 8–9 August 2017: Author(s) (AIP Conference Proceedings), S. 190013.

Nam, Alexander; Kawalla, Rudolf; Zinoviev, Aleksandr; Erisov, Yaroslav A.; Prüfert, Uwe; Eiermann, Michael (2017): Temperature Validation of 3D Model for the Reversing Hot Rolling in Connection with a Coil Model. In: KEM 746, S. 132–137. DOI: 10.4028 www.scientific.net/KEM.746.132.

Oswald, Anja; Schmidtchen, Rosita; Šimek, D.; Rafaja, D.; Kawalla, R.; Lehmann, Gunter (2017): Advanced possibilities of fast quality check in wire production processes by means of fast microstructure analysis. In: Materials Science Forum 892 MSF, S. 73–81. DOI: 10.4028 www.scientific.net/MSF.892.73.

Poprawe, R.; Bleck, W.; Piller, F. T.; Schuh, G.; Barg, S.; Bohl, A. et al. (2017): Direct, mold-less production systems. In: Integrative Production Technology: Theory and Applications. DOI: 10.1007/978-3-319-47452-6\textunderscore.

Prahl, U.; Lin, M.; Weikamp, M.; Hueter, C.; Schicchi, D.; Hunkel, M.; Spatschek, R. (2017): Multiscale, Coupled Chemo-mechanical Modeling of Bainitic Transformation during Press Hardening. In: Proceedings of the 4th World Congress on Integrated Computational Materials Engineering (ICME 2017): Springer, S. 335–343.

Ramazani, A.; Serafeim, A.; Prahl, U. (2017): Towards a micromechanical based description for strength increase in dual phase steels during bake-hardening process. In: Materials Science and Engineering A 702, S. 386–397. DOI: 10.1016/j.msea.2017.07.017.

Schacht, K.; Motaman, A. H.; Prahl, U.; Bleck, W. (2017): A unified dislocation density-dependent physical-based constitutive model for cold metal forming. In: AIP Conference Proceedings 1896. DOI: 10.1063/1.5008195.

Schmidtchen, Matthias; Adamyanets, Pavel; Kawalla, R. (2017): Model approaches for simulation of processes in rod and wire production. In: Materials Science Forum 892 MSF, S. 34–43. DOI: 10.4028/www.scientific.net/MSF.892.34.

Schmitz, G. J.; Farivar, H.; Prahl, U. (2017): Scenario for Data Exchange at the Microstructure Scale. In: Integrating Materials and Manufacturing Innovation 6 (1), S. 127–133.

Schneider, J.; Stöcker, A.; Kawalla, R.; Franke, Armin (2017): Evolution of Optimum Grain Size for Low Loss Ferritic FeSi Steels. In: Steel Research International, S. 1700201. DOI: 10.1002/srin.201700201.

Sharma, M.; Dahmen, K.; Prahl, U.; Bleck, W. (2017): Productivity in Science, and Team Diversity: An expolratory study. In: Praveen Kumar Jain, Jean-Charles Lamirel und Parveen Babbar (Hg.): Trends in bibliometrics and scientometrics studies. London, London: Athena Academic, S. 27–41.

Sharma, M.; Richter, S.; Prahl, U.; Bleck, W. (2017): Characterization of Nb-Microsegregation and Eutectic Carbide in As-Cast Nb-Microalloyed Al-Free Case Hardening Steel. In: Steel Research International 88 (10). DOI: 10.1002/srin.201700092.

Stöcker, A.; Schmidtchen, Matthias; Kawalla, R. (2017): Hot rolling simulation for non-oriented electrical steel. In: AIP Conference Proceedings, 190021-1 bis 190021-6. DOI: 10.1063/1.5008234.

Suwanpinij, P.; Li, X.; Prahl, U.; Bleck, W. (2017): Modeling Bainite Transformation and Retained Austenite in Hot Rolled TRIP Steel by Instantaneous Carbon Enrichment. In: Steel Research International 88 (12). DOI: 10.1002/srin.201700122.

Weikamp, M.; Hüter, C.; Lin, M.; Prahl, U.; Schicchi, D.; Hunkel, M.; Spatschek, R. (2017): Scale bridging simulations of large elastic deformations and bainitic transformations. In: Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics) 10164 LNCS, S. 125–138. DOI: 10.1007/978-3-319-53862-4.

Berge, F.; Teuber, M.; Kawalla, R.; Ullmann, M.: Influence of heat-treatment and rolling conditions on the mechanical warm forming properties of twin-roll cast AZ31,. Key Engineering Materials 746 (2017), S. 184-191.

Henseler, T., Ullmann, M., Korpala, G., Klimaszewska, K., Kawalla, R. u. Berge, F.: Influence of deformation controlled strain rate on tensile and compression behaviour of magnesium and steel wire. Materials Science Forum 892 MSF (2017), S. 89–96

Korpala, G., Hoffmann, F. u. Kawalla, R.: Development of a procedure for low-temperature testing of wire materials and basic research into the behaviour of materials in the temperature range of -50 to -80 °C. Materials Science Forum 892 MSF (2017), S. 82–88

Oswald, A., Schmidtchen, R., Šimek, D., Rafaja, D., Kawalla, R. u. Lehmann, G.: Advanced possibilities of fast quality check in wire production processes by means of fast microstructure analysis. Materials Science Forum 892 MSF (2017), S. 73–81

Schmidtchen, M., Adamyanets, P. u. Kawalla, R.: Model approaches for simulation of processes in rod and wire production. Materials Science Forum 892 MSF (2017), S. 34–43

 

2016

Schmidtchen, M. u. Kawalla, R.: Fast Numerical Simulation of Symmetric Flat Rolling Processes for Inhomogeneous Materials Using a Layer Model − Part I. Basic Theory. Steel Research International 87 (2016) 8, S. 1065–1081

Neh, K., Ullmann, M. u. Kawalla, R.: Substitution of Rare Earth Elements in Hot Rolled Magnesium Alloys with Improved Mechanical Properties. Materials Science Forum 854 (2016), S. 57–64

Neh, K., Ullmann, M. u. Kawalla, R.: Microstructural Evolution of the Magnesium Alloy AZ31 with and without SiC Particles during Ultrasonic Melt Treatment. Key: Engineering Materials 716 (2016), S. 345–351

Nam, A., Prüfert, U., Eiermann, M. u. Kawalla, R.: Modelling the temperature evolution during hot reversing strip rolling of magnesium alloys. In: Materials Science Forum. 2016, S. 140–145

Liu, Hai-Tao; Schneider, J.; Stöcker, Anett; Franke, A.; Gao, F.; Song, Hong-Yu et al. (2016): Microstructure and Texture Evolution in Non-oriented Electrical Steels Along Novel Strip Casting Route and Conventional Route. In: Steel Research International 87 (5), S. 589–598. DOI: 10.1002/srin.201500145

Schmidtchen, M., Rimnac, A., Warczok, P., Kozeschnik, E., Bernhard, C., Bragin, S., Kawalla, R. u. Linzer, B.: Investigation of the influence of the chemical composition of HSLA steel grades on the microstructure homogeneity during hot rolling in continuous rolling mills using a fast layer model. IOP Conference Series: Materials Science and Engineering 119 (2016)

Schneider, J., Franke, A., Stöcker, A., Liu, H.-T., Wang, G.-D. u. Kawalla, R.: Evolution and Interaction of the Microstructure and Texture at the Different Processing Steps for Ferritic Nonoriented Electrical Steels. IEEE Transactions on Magnetics 52 (2016) 5, S. 1–6

Shimanov, M., Korpała, G., Terzic, A. u. Kawalla, R.: Bainitic steels, their characteristics and applications. In: Key Engineering Materials. 2016, S. 104–110

Pranke, Katja; Guk, S. (2016): Material Flow in Mg-PSZ Particle Reinforced TRIP-Matrix-Composites due to Hot-Rolling. In: Key Engineering Materials 684, S. 97–103. DOI: 10.4028/www.scientific.net/KEM.684.97.

Steentjes, S., Leuning, N., Dierdorf, J., Wei, X., Hirt, G., Weiss, H. A., Volk, W., Roggenbuck, S., Korte-Kerzel, S., Stöcker, A., Kawalla, R. u. Hameyer, K.: Effect of the Interdependence of Cold Rolling Strategies and Subsequent Punching on Magnetic Properties of NO Steel Sheets. IEEE Transactions on Magnetics 52 (2016) 5, S. 1–4

Stöcker, A., Franke, A., Hermann, H. u. Kawalla, R.: Influence of hot rolling condition on the final microstructure of nonoriented electrical steel Fe-3.2 wt.% Si. In: Materials Science Forum. 2016, S. 16–21

Ullmann, Madlen; Saleh, Haitham; Neh, Kristina; Krbetschek, Christina; Henseler, Thorsten; Berge, Franz; Kawalla, Rudolf (2016): Umformtechnisch erzeugte hybride Werkstoffpaarungen auf Basis von AZ31-Gießwalzband. In: Alexander Brosius (Hg.): Den Eigenschaften Form geben. Tagungsband : 23. Sächsische Fachtagung Umformtechnik : Dresden, 7.-8. Dezember 2016. Dresden: TU Dresden, S. 194–203.

Rushchits, S., Aryshenskii, E., Kawalla, R. u. Serebryany, V.: Investigation of texture structure and mechanical properties evolution during hot deformation of 1565 aluminum alloy. In: Materials Science Forum. 2016, S. 73–78

Wenzel, Claudia; Aneziris, Christos G.; Pranke, Katja (2016): Metal-Matrix Composites Prepared by Paper-Manufacturing Technology. In: Metall and Mat Trans A 47 (1), S. 160–169. DOI: 10.1007/s11661-015-2819-2.

Yashin, V. V., Aryshensky, E. V., Kawalla, R., Serebryany, V. N. u. Rushchits, S. V.: Investigation impact of stressed state conditions and thermomechanical parameters on the texture and structure evolution in 1565ph aluminium alloy. IOP Conference Series: Materials Science and Engineering 156 (2016) 1

Leinenbach, C., Czaderski, C., Michels, J., Graf, M. u. Kawalla, R.: Development of rolling technology for an iron-based shape-memory-alloy. In: Materials Science Forum. 2016, S. 79–86

Kittner, K., Wiesner, J. u. Kawalla, R.: A new approach for void closure in bulk metal forming. In: Key Engineering Materials. 2016, S. 595–604

Kawalla, R., Stöcker, A., Grigoleit, J., Wei, X., Dierdorf, J., Hirt, G., Roggenbuck, S., Korte-Kerzel, S., Weiss, H. A., Volk, W., Leuning, N., Steentjes, S. u. Hameyer, K.: Low-loss FeSi sheet for energy-efficient electrical drives. WMM'16 (2016), S. 177–188

Guk, S.; Milisova, Diana; Pranke, Katja (2016): Influence of Deformation Conditions on the Microstructure and Formability of Sintered Mg-PSZ Reinforced TRIP-Matrix-Composites. In: Key Engineering Materials 684, S. 86–96. DOI: 10.4028/ www.scientific.net/KEM.684.86.

Evgenii, A., Kawalla, R., Vladimir, A. u. Christian, S. (2016): Investigation of texture and structure evolution during hot rolling of 1070, 3104 and 8011 aluminum alloys in continuous finishing mill. TMP 2016 - 5th International Conference on ThermoMechanical Processing, Advance Programme

Baytekin-Gerngross, M.; Gerngross, M. D.; Carstensen, J.; Adelung, R. (2016): Making metal surfaces strong, resistant, and multifunctional by nanoscale-sculpturing. In: Nanoscale Horiz, S. -. DOI: 10.1039/C6NH00140H.

Adamyanets, P., Schmidtchen, M. u. Kawalla, R.: Extension of the Freiberger model of spread for the calculation of material flow during rolling of long products to a new material group of mg alloys AZ31, AZ81, WE43. In: Key Engineering Materials. 2016, S. 677–684

Berge, F.; Henseler, T.; Krbetschek, C.; Ullmann, M.; Kawalla, R.: Influence of temperature and loading rate on the forming limit behaviour of twin-roll cast, rolled and heat-treated AZ31 as a function of the stress state, Key Engineering Materials 684 (2016), S. 67-73

Berge, F.; Winderlich, H.; Krbetschek, C.; Ullmann, M.; Kawalla, R.: The effect of sheet thickness, loading rate and punch diameter on the deformation behaviour of AZ31 during 3-point bending, Materials Science Forum 854 (2016), S. 65-72.

Berge, F.; Wollschläger, M.; Krbetschek, C.; Ullmann, M.: Influence of temperature, strain rate, and sheet thickness on the deformation behaviour of twin-roll cast, rolled and heat-treated AZ31 under uniaxial loading, Key Engineering Materials 684 (2016), S. 29-34.

Dembinska, J.; Graf, M.; Ullmann, M.; Neh, K.; Awiszus, B.; Kawalla, R.: Property oriented wire rolling technology for Mg-Al alloys, Key Engineering Materials 684 (2016), S. 42-56.

Krbetschek, C.; Berge, F.; Oswald, O.; Ullmann, M.; Kawalla, R.: Microstructure investigations of inverse segregations in twin-roll cast AZ31 strips, Magnesium Technology (2016), S. 369-374.

Schneider, J.; Franke, A.; Stöcker, A.; Kawalla, R.: Deformation structure and recrystallization of ferritic FeSi steels, Steel Research International 87 (2016), S. 1-11.

 

2015

Berge, F.; Krüger, L.; Ouaziz, H.; Ullrich, C.: Influence of temperature and strain rate on the flow stress behavior of twin-roll cast, rolled and heat-treated AZ31 magnesium alloy, Transactions of Nonferrous Metals Society of China 25 (2015), S. 1-13.

Berge, F.; Krüger, L.; Ullmann, M.; Krbetschek, C.; Kawalla, R.: Anisotropy of the mechanical properties of twin-roll cast, rolled and heat-treated AZ31 as a function of temperature and strain rate, Materials Today: Proceedings 2 (2015), S. 233-241.

Graf, M.; Ullmann, M.; Kawalla, R.: Property-oriented Production of Forged Magnesium Components, Materials Today: Proceedings 2 (2015), S. 74-84.

Kittner, K.; Feuerhack, A.; Förster, W.; Binotsch, C.; Graf, M.: Recent Developments for the Production of Al-Mg Compounds, Materials Today: Proceedings 2 (2015), S. 225-232.

Liu, H.-T.; Schneider, J.; Stöcker, A.; Franke, A.; Gao, F.; Song, H.-Y.; Liu, Z.-Y.; Kawalla, R.; Wang, G.-D.: Microstructure and Texture Evolution in Non-oriented Electrical Steels Along Novel Strip Casting Route and Conventional Route, Steel Research International 86 (2015), S. 1-10.

Nam, A.; Prüfert, U.; Eiermann, M.; Kawalla, R.: Numerical Modeling of Thermal Evolution in Hot Strip Rolling of Magnesium Alloy, Key Engineering Materials 651-653 (2015), S. 207-212.

Neh, K.; Ullmann, M.; Kawalla, R.: Effect of Grain refining Additives on Microstructure and Mechanical Properties of the Commercial Available Magnesium alloys AZ31 and AM50, Materials Today: Proceedings 2 (2015), S. 219-224.

Neh K.; Ullmann M.; Oswald M.; Berge F.; Kawalla R.: Twin Roll Casting and Strip Rolling of Several Magnesium Alloys, Materials Today: Proceedings 2 (2015), S. 45-52.

Pranke, K.; Wendler, M.; Weidner, A.; Guk, S.; Weiß, A.; Kawalla, R.: Formability of strong metastable Fe-15Cr-3Mn-3Ni-0.2C-0.1N austenitic TRIP/(TWIP) steel - A comparison of different base materials, Journal of Alloys and Compounds 648 (2015), S. 783-793.

Stöcker, A.; Schneider, J.; Scholze, T.; Franke, A.; Hermann, H.; Kawalla, R.: Influence of cubic texture intensity of hot rolled ferritic non-oriented electrical steels on the microstructure and texture in the final processed material, IOP Conference Series: Materials Science and Engineering 82 (2015), S. 12070.

Szczepanik, S.; Nikiel, P.; Mitchell, S. C.; Kawalla, R.: Microstructure evolution in warm forged sintered ultrahigh carbon steel, Archives of Civil and Mechanical Engineering 15 (2015), S. 301-307.

Ullmann M.; Berge F.; Neh K.; Kawalla R.: Development of a rolling technology for twin-roll cast magnesium strips, Metalurgija 54 (2015), S. 711-714.

Ullmann, M.; Graf, M.; Kawalla, R.: Static Recrystallization Kinetics of a Twin-roll Cast AZ31 alloy, Materials Today: Proceedings 2 (2015), S. 212-218.

Kawalla, R.; Ullmann, M.; Neh, K.; Berge, F.: Magnesium - An Old Lightweight Material with a New Properties Profile: 5th International Conference on Accuracy in Forming Technology, 22nd Saxon Conference on Forming Technology SFU 2015. In: Landgrebe, D.: Drossel, W.-G.; Putz, M., Verlag Wissenschaftliche Scripten, 2015, S. 441-457.


2014

Berge, F.; Krüger, L.; Ullrich, C.: Forming limit diagrams of twin-roll cast, rolled and heat-treated AZ31 as a function of temperature and loading rate, Materials Science and Engineering: A 614 (2014), S. 27-35

Bittner, F.; Yin, S.; Kauffmann, A.; Freudenberger, J.; Klauß, H.; Korpala, G.; Kawalla, R.; Schillinger, W.; Schultz, L.: Dynamic recrystallisation and precipitation behaviour of high strength and highly conducting Cu-Ag-Zr-alloys, Materials Science and Engineering A 597 (2014), S. 139-147

Gorelova, S.; Schaeben, H.; Kawalla, R.: Quantifying texture evolution during hot rolling of magnesium twin roll cast strip, Materials Science and Engineering A 602 (2014), S. 134-142

Graf, M.; Kawalla, R.: Scale development on steel during hot strip rolling, Metallurgia Italiana 106 (2014), S. 43-49.

Graf, M.; Kawalla, R.: Approaches for a fast analysis system for hot rolling processes, Steel Research International 85 (2014), S. 1364-1368.

Graf, M.; Ullmann, M.; Kawalla, R.: Influence of Initial State on Forgeability and Microstructure Development of Magnesium Alloys, Procedia Engineering (2014), S. 546-551.

Jabłońska, M.; Niewielski, G.; Kawalla, R.: High manganese TWIP steel - Technological plasticity and selected properties, Trans Tech Publications Ltd, Katowice, 2014

Kawalla, R.: Fast algorithms for material specific process chain design and analysis in metal forming, Steel Research 85 (2014), S. 1326-1327.

Neh, K.; Kawalla, R.: Effect of SiC addition on the mechanical properties of twin-roll-cast AZ31 sheet, Key Engineering Materials 623-623 (2014), S. 575-580

Neh, K.; Ullmann, M.; Kawalla, R.: Twin-roll-casting and hot rolling of magnesium alloy WE43, Procedia Engineering 81 (2014), S. 1553-1558

Rafaja, D.; Krbetschek, C.; Ullrich, C.; Martin, S.: Stacking fault energy in austenitic steels determined by using in situ X-ray diffraction during bending, Journal of Applied Crystallography 47 (2014), S. 936-947.

Reichelt, S.; Saleh, H.; Schmidtchen, M.; Kawalla, R.: On the bonding strength of Mg-Mg and Mg-Al material compounds, Trans Tech Publications, Las Vegas, NV, 2014

Saleh, H.; Reichelt, S.; Schmidtchen, M.; Schwarz, F.; Kawalla, R.; Krüger, L.: Effect of inter-metallic phases on the bonding strength and forming properties of Al/Mg sandwiched composite: Key Engineering Materials (2014), S. 467-475.

Saleh, H.; Weling, T.; Seidel, J.; Schmidtchen, M.; Kawalla, R.; Mertens, F.; Vogt, H.-P.: An XPS study of native oxide and isothermal oxidation kinetics at 300°C of AZ31 Twin Roll Cast magnesium alloy, Oxidation of Metals 81 (2014), S. 529-548.

Schmidt, C.; Kawalla, R.: Method for the depletion of the basal texture in rolled AZ31 magnesium sheets, Materials Science Forum 783-789 (2013), S. 478-484.

Schmidtchen, M.; Kawalla, R.; Rimnac, A.: Simulation of inhomogeneous materials evolution in hot rolling using a layer model, Materials Science Forum 783-786 (2014), S. 2194-2200

Tataru, A. S.; Potemkin, V. K.; Kawalla, R.; Lukin, A. S.; Dolgov, A. V.: Production of auto-body dual-phase steel with single-step cooling on the output conveyer of the 2000 continuous broad-strip mill at OAO NLMK, Steel in Translation 44 (2014), S. 491-497

Ullmann, M.; Kawalla, R.; Vogt, H.-P.: Deformation behaviour and microstructure development of Twin Roll Cast AZ31 strips, Metallurgia Italiana 106 (2014), S. 35-42.

Ullmann, M.; Schmidtchen, M.; Kawalla, R.: Dynamic recrystallization behaviour of Twin Roll Cast AZ31 strips during hot deformation, Key Engineering Materials 622-623 (2014), S. 569-574

Ullmann, M.; Graf, M.; Schmidtchen, M.; Kawalla, R.: Metadynamic recrystallization kinetics of twin roll cast AZ31 alloy during hot deformation, Procedia Engineering 81 (2014), S. 1559-1564

Kawalla, R.: Fast algorithms for material specific process chain design and analysis in metal forming, 12th International Conference on Metal Forming, METAL FORMING 2008 85 (2014), S. 1326-1327.

Kawalla, R.: AutoMetForm - SFU 2014: New materials for vehicle components; November 3rd to 5th 2014, Freiberg, Saxony; Conference Proceedings, Inst. für Metallformung, Freiberg, 2014.

Khmelevskaya, I. Y.; Kawalla, R.; Prokoshkin, S. D.; Komarov, V. S.: Effect of multiaxial deformation Max-strain on the structure and properties of Ti-Ni alloy, 6th International Conference on Nanomaterials by Severe Plastic Deformation, Metz, 2014.

Ullmann, M.; Berge, F.; Neh, K.; Kawalla, R.; Vogt, H.-P.: Application of magnesium sheets and strips in vehicle construction. In: Kawalla, R.: AutoMetForm - SFU 2014: New materials for vehicle components; November 3rd to 5th 2014, Freiberg, Saxony; conference proceedings, Inst. für Metallformung, Freiberg, 2014, S. 37-45.

 

2013

Dedov, S.; Lehmann, G.; Kawalla, R.: Application of Combined Casting-Forging Process for Production of Durable Lightweight Aluminum Parts, Key Engineering Materials 554-557 (2013), S. 264-273.

Gorelova, S.; Ullmann, M.; Oswald, M.; Kawalla, R.: Effect of different finish-rolling parameters on the microstructure and mechanical properties of twin-roll-cast (TRC) AZ31 strips, Key Engineering Materials 554-557 (2013), S. 274-279.

Kawalla, R.; Schmidtchen, M.: Numerical simulation of hot rolling, Materials Science Forum 762 (2013), S. 22-30.

Li, G. Q.; Zhou, B. W.; Schneider, J.; Kawalla, R.: Effect of Thermal Treatment after Hot Rolling on the Microstructure of Fe-2.4wt.%Si, Materials Science Forum 762 (2013), S. 741-746.

Rafaja, D.; Krbetschek, C.; Borisova, D.; Schreiber, G.; Klemm, V.: In situ X-ray diffraction study of stacking fault formation in the near-surface region of transformation induced plasticity steels, Thin Solid Films 530 (2013), S. 105-112.

Rodriguez-Calvillo, P.; Perez-Sine, M.; Schneider, J.; Hermann, H.; Cabrera, J. M.; Kawalla, R.: Effect of the Si and Al Content in Ferritic Electrical Steels on the Flow Behaviour and Dynamic Softening in Hot Rolling, Materials Science Forum 762 (2013), S. 747-752.

Schwarz, F.; Lange, K.; Krüger, L.; Kawalla, R.; Reichelt, S.: Microstructural and mechanical characterization of ARB AZ31, Materials Science Forum 765 (2013), S. 403-407.

Terzic, A.; Calcagnotto, M.; Guk, S.; Schulz, T.; Kawalla, R.: Influence of Boron on transformation behavior during continuous cooling of low alloyed steels, Materials Science and Engineering A 584 (2013), S. 32-40.

Ullmann, M.; Saleh, H.; Schmitdchen, M.; Kawalla, R.; Vogt, H.-P.: Improvement of ductility for Twin Roll Cast and rolled AZ31 strips by use of Taguchi method, Archives of Civil and Mechanical Engineering 13 (2013), S. 1-6.

Ullmann, M.; Oswald, M.; Kawalla, R.; Vogt, H.-P.: Magnesium strip for automotive lightweight construction: 70th International Magnesium Association Annual World Magnesium Conference, Xi’an, 2013.

 

2012

Graf, M.; Kawalla, R.: Characterization of multilayered oxide scale, Steel Research International (2012), S. 979-982.

Graf, M.; Kawalla, R.: Scale Behaviour and Deformation Properties of Oxide Scale during Hot Rolling of Steel, Key Engineering Materials 504-506 (2012), S. 199-204.

Hagemann, P.; Kawalla, R.; Korpała, G.; Schmidtchen, M.: The influence of the initial state on the softening and precipitation kinetics in hot metal forming, Materials Science Forum 706-709 (2012), S. 1397-1402.

Liu, J.; Kawalla, R.: Influence of asymmetric hot rolling on microstructure and rolling force with austenitic steel, Transactions of Nonferrous Metals Society of China 22 (2012), S. 504-511.

Schneider, J.; Reichelt, S.; Stöcker, A.; Fachmann, B.; Kawalla, R.: Frequency dependence of magnetization behavior for FeSi materials with different thickness, IEEE Transactions on Magnetics 48 (2012), S. 1429-1432.

Schneider, J.; Jungnickel, W.; Müller, W.; Hermann, H.; Kawalla, R.: Hot Rolling of FeSi Steels – Effects by Hot Rolling in the Two Phase Region, Materials Science Forum 704–705 (2012), S. 1161-1166.

Suwanpinij, P.; Prahl, U.; Bleck, W.; Kawalla, R.: Fast algorithms for phase transformations in dual phase steels on a hot strip mill run-out table (ROT), Archives of Civil and Mechanical Engineering 12 (2012), S. 305-311.

Ullmann, M.; Oswald, M.; Gorelova, S.; Kawalla, R.; Vogt, H.-P.: Strip rolling technology of magnesium alloys, Steel Research International (2012), S. 855-858

Dembińska, J.; Kawalla, R.: The microstructure and mechanical properties of twin roll cast AZ31 sheets after pre-straining or/and heat treatment, 14th International Conference on Metal Forming, METAL FORMING 2012 SPL. ISSUE (2012), S. 1087-1090.

Reichelt, S.; Schmidtchen, M.; Kawalla, R.: The problem of proper surface preparation and various influences on resulting bonding strength for the accumulative roll-bonding of twin roll cast AZ31 Mg-sheet, 14th International Conference on Metal Forming, METAL FORMING 2012 SPL. ISSUE (2012), S. 867-870.

 

2011

Kawalla, R.; Ullmann, M.; Schmidt, C.; Dembińska, J.; Vogt, H. P.: Properties of Magnesium Strips Produced by Twin-Roll-Casting and Hot Rolling, Materials Science Forum 690 (2011), S. 21-24.

Weidner, A.; Yanina, A.; Guk, S.; Kawalla, R.; Biermann, H.: Microstructure and Local Strain Fields in a High-Alloyed Austenitic Cast Steel and a Steel-Matrix Composite Material after in situ Tensile and Cyclic Deformation, Steel Research International 82 (2011), S. 990-997.

Yanina, A.; Guk, S.; Müller, W.; Kawalla, R.; Weigelt, C.: Dynamic and Static Softening of Sintered MgO-PSZ / TRIP-matrix Composites with up to 10 vol.-% ZrO2, Steel Research International 82 (2011), S. 1158-1165.

Graf, M.; Kawalla, R.: Deformation behaviour and mechanical properties of oxide scales during hot metal forming processes: 10th International Conference on Technology of Plasticity (ICTP), Aachen, 2011, S. 78-81.

Hagemann, P.; Schmidtchen, M.; Rafaja, D.; Kawalla, R.: Investigation of production technologies for sub-microcrystalline materials with a special emphasis on accumulative roll bonding (ARB): 10th International Conference on Technology of Plasticity (ICTP), 2011, S. 713-718.

Schäberle, P.; Roll, K.; Kawalla, R.; Stilz, M.: Material characterization of AHSS for typical forming conditions: 10th International Conference on Technology of Plasticity (ICTP), Aachen, 2011, S. 1224-1229.

Szeliga, D.; Graf, M.; Kawalla, R.; Pietrzyk, M.: Identification of material properties based on rolling process at 4-stand laboratory mill: AIP Conference Proceedings, 2011, Volume 1353, S. 391-397.

Tomaszewska, A.; Jabłońska, M.; Hadasik, E.; Niewielski, G.; Kawalla, R.: Research of selected properties of two types of high manganese steel wires: IOP Conference Series: Materials Science and Engineering, 22nd ed, 2011, Volume 1.

 

2010

Kawalla, R.; Graf, M.; Tokmakov, K.: Simulation system of multistage hot rolling process of flat products, Metalurgija 49 (2010), S. 175-179.

Kawalla, R.; Müller, W.; Jungnickel, W.: Physical Simulation at Hot Deformation, Materials Science Forum 638-642 (2010), S. 2591-2597.

Mandziej, S. T.; Waengler, S.; Noack, J.; Kawalla, R.: Simulation of Evolution of Dual-Phase Microstructure, Materials Science Forum 638-642 (2010), S. 2652-2657.

Müller, W.; Schneider, J.; Jungnickel, W.; Hermann, H.; Kawalla, R.: Softening behaviour at hot rolling of FeSi alloys with phase transformation, Metallurgia Italiana 102 (2010), S. 3-7.

Guk, S.; Yanina, A.; Müller, W.; Kawalla, R.: Mathematical-physical model of resistance sintering with current conducting electrode punches of steel ceramic composites, Materialwissenschaft und Werkstofftechnik 41 (2010), S. 33-38.

Waengler, S.; Kawalla, R.; Kruse, J.: Bainitic steels for cold heading applications, Konstruktion (2010), S. IW4-IW5.

Kawalla, R.; Goldhahn, G.; Perez Melguizdo, C.; Hartmann, K.; Llanos, J.: In-line quality control of hot wire steel, Proceeding of the 10th International Conference on Steel Rolling, Beijing, China, 2010.

Neubauer, M.; Schmidtchen, M.; Kawalla, R.: Scratch brushing of metallic surfaces as a surface treatment and its influence on the bonding quality of a steel-aluminium clad, Proceeding of the 10th International Conference on Steel Rolling, Beijing, China, 2010.

Suwanpinij, P.; Mukherjee, K.; Graf, M.; Prahl, U.; Bleck, W.; Kawala, R.: Towards modelling of phase transformation and mechanical properties in hot rolled dual phase steel, Proc. TMS Annual Meeting, 14.-18. Februar, Seattle, USA, 2010.

 

2009

Maity, S. K.; Ballal, N. B.; Goldhahn, G.; Kawalla, R.: Development of ultrahigh strength low alloy steel through electroslag refining process, ISIJ International 49 (2009), S. 902-910.

Pupke, F.; Ouchanin, S.; Kawalla, R.; Jost, N.; Ziiiy, A.: Development and fatigue testing of dropper conductors of overhead contact lines, eb - Elektrische Bahnen 107 (2009), S. 77-82.

 

2008

Kawalla, R.; Lehmann, G.; Ullmann, M.; Vogt, H.-P.: Magnesium semi-finished products for vehicle construction, Archives of Civil and Mechanical Engineering 8 (2008), S. 93-101.

Kawalla, R.; Oswald, M.; Schmidt, C.; Ullmann, M.; Vogt, H.-P.; Cuong, N. D.: Development of a strip-rolling technology for Mg alloys based on the twin-roll-casting process, Magnesium Technology (2008), S. 177-182.

Kawalla, R.; Oswald, M.; Schmidt, C.; Ullmann, M.; Vogt, H.-P.; Cuong, N. D.: New technology for the production of magnesium strips and sheets, Metalurgija 47 (2008), S. 195-198.

Kawalla, R.; Krause, G.; Kaufmann, C.: Development of simulation software for the analysis of multi-stage hot rolling of strip and wire rod, Steel Research International 79 (2008), S. 738-744.

Kuziak, R.; Kawalla, R.; Waengler, S.: Advanced high strength steels for automotive industry: A review, Archives of Civil and Mechanical Engineering 8 (2008), S. 103-117.

Maity, S. K.; Ballal, N. B.; Goldhahn, G.; Kawalla, R.: Development of low alloy ultrahigh strength steel, Ironmaking and Steelmaking 35 (2008), S. 228-240.

Maity, S. K.; Ballal, N. B.; Goldhahn, G.; Kawalla, R.: Development of low alloy titanium and niobium microalloyed ultrahigh strength steel through electroslag refining, Ironmaking and Steelmaking 35 (2008), S. 379-386.

Schindler, I.; Kawalla, R.; Plura, J.; Kubina, T.; Rusz, S.; Hadasik, E.; Jurko, V.: Model of mean flow stress of Ti-IF steel considering effect of phase transformations, Steel Research 79 (2008), S. 758-764.

Siodlak, D.; Lotter, U.; Kawalla, R.; Paul, G.: Determination and modelling of the influence of cooling in the coil on the mechanical properties of hot strip steels with bainite, Steel Research 76 (2005), S. 815-821.

Siodlak, D.; Lotter, U.; Kawalla, R.; Schwich, V.: Modelling of the mechanical properties of low alloyed multiphase steels with retained austenite taking into account strain-induced transformation, Steel Research 79 (2008), S. 776-783.

Waengler, S.; Kawalla, R.; Kuziak, R.: High strength - high toughness bainitic steels alloyed with niobium for long products, Steel Research 79 (2008), S. 273-279.