Scientific Publications

2020

  • Alsultan, S., Quitzke, C., Cheng, Z., Krüger, L., Volkova, O., Wendler, M.
    Strain-Induced Martensite Formation and Mechanical Properties of Fe–19Cr–4Ni–3Mn–0.15N–0.15C Austenitic Stainless Steel at Cryogenic Temperature, steel research int., (2021) 2000611, DOI: 10.1002/srin.202000611
  • Baumgart, C., Weigelt, C., Lißner, A., Martin, S., Aneziris, C. G., Krüger L.
    Processing of 17Cr7Mn6Ni TRIP Steel Powder by Extrusion at Room Temperature and Pressureless Sintering, Adv. Eng. Mater., (2020) 2000019, pp. 1-10, DOI: 10.1002/adem.202000019
  • Biermann, H., Droste, M.
    Cyclic Deformation and Fatigue Behavior of Metastable Austenitic Steels and Steel-Matrix-Composites, Chapter 13, in: Springer Series in Materials Science, Austenitic TRIP/TWIP Steels and Steel-Zirconia Composites, 298 (2020), pp. 413-449, Hrsg.: Horst Biermann, Christos C. G. Aneziris, Verlag: Springer Nature Switzerland AG, Cham, Switzerland, ISBN 978-3-030-42602-6, ISBN 978-3-030-42603-3 (eBook), DOI: 10.1007/978-3-030-42603-3
  • Berek, H., Oppelt, M., Aneziris, C. G.
    X-Ray Computer Tomography for Three-Dimensional Characterization of Deformation and Damage Processes, Chapter 16, in: Springer Series in Materials Science, Austenitic TRIP/TWIP Steels and Steel-Zirconia Composites, 298 (2020), pp. 512-556, Hrsg.: Horst Biermann, Christos C. G. Aneziris, Verlag: Springer Nature Switzerland AG, Cham, Switzerland, ISBN 978-3-030-42602-6, ISBN 978-3-030-42603-3 (eBook), DOI: 10.1007/978-3-030-42603-3
  • Borrmann, S., Neumann, S., Schwarze, R.
    CFD Analysis of the Particle and Melt Flow Behavior During Fabrication and Processing of TRIP-Matrix-Composites, Chapter 18, in: Springer Series in Materials Science, Austenitic TRIP/TWIP Steels and Steel-Zirconia Composites, 298 (2020), pp. 585-619, Hrsg.: Horst Biermann, Christos C. G. Aneziris, Verlag: Springer Nature Switzerland AG, Cham, Switzerland, ISBN 978-3-030-42602-6, ISBN 978-3-030-42603-3 (eBook), DOI: 10.1007/978-3-030-42603-3
  • Brachhold, N., Berek, H., Fruhstorfer, J., Aneziris, C. G.
    Focused Ion Beam (FIB) Parameters for the Preparation of Oxidic Ceramic Materials, (2020) 2001235, Adv. Eng. Mater., DOI: 10.1002/adem.202001235
  • Burgold, A., Droste, M., Seupel, A., Budnitzki, M., Biermann, H., Kuna, M. Modeling of the cyclic deformation behavior of austenitic TRIP-steels, International Journal of Plasticity, 133 (2020) 102792, pp. 1-14, DOI: 10.1016/j.ijplas.2020.102792
  • Burkhardt, C., Wagner, R., Baumgart, C., Günther, J., Krüger, L., Biermann, H.
    Microstructural and Mechanical Characterization of Square-Celled TRIP Steel Honeycomb Structures Producedby Electron Beam Melting, Adv. Eng. Mater., (2020) 2000037, pp. 1-10, DOI: 10.1002/adem.202000037
  • Decker, S., Baumgart, C., Krüger, L., Schumacher, A.
    Electron Beam Melting of various structures and their quasi-static compression behavior, Materials Science & Engineering A, 793 (2020) 139849, pp. 1-9, DOI: 10.1016/j.msea.2020.139849
  • Decker, S., Radajewski, M., Krüger, L.
    Synthesis of TRIP Matrix Composites by Field Assisted Sintering Technology—Challenges and Results, Chapter 9, in: Springer Series in Materials Science, Austenitic TRIP/TWIP Steels and Steel-Zirconia Composites, 298 (2020), pp. 257-282, Hrsg.: Horst Biermann, Christos C. G. Aneziris, Verlag: Springer Nature Switzerland AG, Cham, Switzerland, ISBN 978-3-030-42602-6, ISBN 978-3-030-42603-3 (eBook), DOI: 10.1007/978-3-030-42603-3
  • Droste, M., Järvenpää, A., Jaskari, M., Motylenko, M., Weidner, A., Karjalainen, P., Biermann, H.

    The role of grain size in static and cyclic deformation behaviour of a laser reversion annealed metastable austenitic steel, Fatigue Fract Eng Mater Struct., (2021) 44. pp. 43–62, DOI: 10.1111/ffe.13326
  • Eckner, R., Baumgart, C., Krüger, L.
    Investigations on the Influence of Strain Rate, Temperature and Reinforcement on Strength and Deformation Behavior of CrMnNi-Steels, Chapter 12, in: Springer Series in Materials Science, Austenitic TRIP/TWIP Steels and Steel-Zirconia Composites, 298 (2020), pp. 379-412, Hrsg.: Horst Biermann, Christos C. G. Aneziris, Verlag: Springer Nature Switzerland AG, Cham, Switzerland, ISBN 978-3-030-42602-6, ISBN 978-3-030-42603-3 (eBook), DOI: 10.1007/978-3-030-42603-3
  • Guk, S., Kawalla, R., Prahl, U.
    Understanding of Processing, Microstructure and Property Correlations During Different Sintering Treatments of TRIP-Matrix-Composites, Chapter 6, in: Springer Series in Materials Science, Austenitic TRIP/TWIP Steels and Steel-Zirconia Composites, 298 (2020), pp. 167-196, Hrsg.: Horst Biermann, Christos C. G. Aneziris, Verlag: Springer Nature Switzerland AG, Cham, Switzerland, ISBN 978-3-030-42602-6, ISBN 978-3-030-42603-3 (eBook), DOI: 10.1007/978-3-030-42603-3
  • Guk, S., Kawalla, R., Prahl, U.
    Understanding of Processing, Microstructure and Property Correlations for Flat Rolling of Presintered TRIP-Matrix Composites, Chapter 7, in: Springer Series in Materials Science, Austenitic TRIP/TWIP Steels and Steel-Zirconia Composites, 298 (2020), pp. 197-222, Hrsg.: Horst Biermann, Christos C. G. Aneziris, Verlag: Springer Nature Switzerland AG, Cham, Switzerland, ISBN 978-3-030-42602-6, ISBN 978-3-030-42603-3 (eBook), DOI: 10.1007/978-3-030-42603-3
  • Halbauer, L., Buchwalder, A., Biermann, H.
    Electron Beam Technologies for the Joining of High Alloy TRIP/TWIP Steels and Steel-Matrix Composites, Chapter 10, in: Springer Series in Materials Science, Austenitic TRIP/TWIP Steels and Steel-Zirconia Composites, 298 (2020), pp. 283-323, Hrsg.: Horst Biermann, Christos C. G. Aneziris, Verlag: Springer Nature Switzerland AG, Cham, Switzerland, ISBN 978-3-030-42602-6, ISBN 978-3-030-42603-3 (eBook), DOI: 10.1007/978-3-030-42603-3
  • Hauser, M., Wendler, M., Mola, J., Fabrichnaya, O., Volkova, O., Weiß, A. Thermodynamic-Mechanical Modelingof Metastable High Alloy AusteniticCrMnNi Steels, Chapter 20, in: Springer Series in Materials Science, Austenitic TRIP/TWIP Steels and Steel-Zirconia Composites, 298 (2020), pp. 651-678, Hrsg.: Horst Biermann, Christos C. G. Aneziris, Verlag: Springer Nature Switzerland AG, Cham, Switzerland, ISBN 978-3-030-42602-6, ISBN 978-3-030-42603-3 (eBook), DOI: 10.1007/978-3-030-42603-3
  • Heinrich, M., Schwarze, R.
    3D-coupling of Volume-of-Fluid and Lagrangian particle tracking for spray atomization simulation in OpenFOAM, SoftwareX, 11 (2020) 100483, pp. 1-7, DOI: 10.1016/j.softx.2020.100483
  • Heuer, C., Oppelt, M., Aneziris, C. G.
    Ceramic Casting Technologies for Fine and Coarse Grained TRIP-Matrix-Composites, Chapter 1, in: Springer Series in Materials Science, Austenitic TRIP/TWIP Steels and Steel-Zirconia Composites, 298 (2020), pp. 1-40, Hrsg.: Horst Biermann, Christos C. G. Aneziris, Verlag: Springer Nature Switzerland AG, Cham, Switzerland, ISBN 978-3-030-42602-6, ISBN 978-3-030-42603-3 (eBook), DOI: 10.1007/978-3-030-42603-3
  • Heuer, C., Brachhold, N., Aneziris, C. G.
    Zirconia Fiber Containing TRIP-Matrix Composites Prepared via Paper-Manufacturing Technology, Adv. Eng. Mater., (2020) 2001154, pp. 1-8, DOI: 10.1002/adem.202001154
  • Huang, Q., Wendler, M., Mola, J., Weiß, A., Krüger, L., Volkova, O.
    Design of High Alloy Austenitic CrMnNi Steels Exhibiting TRIP/TWIP Properties, Chapter 2, in: Springer Series in Materials Science, Austenitic TRIP/TWIP Steels and Steel-Zirconia Composites, 298 (2020), pp. 41-75, Hrsg.: Horst Biermann, Christos C. G. Aneziris, Verlag: Springer Nature Switzerland AG, Cham, Switzerland, ISBN 978-3-030-42602-6, ISBN 978-3-030-42603-3 (eBook), DOI: 10.1007/978-3-030-42603-3
  • Kirschner, M., Guk, S., Kawalla, R., Prahl, U.
    Powder Forging of Presintered TRIP-Matrix Composites, Chapter 8, in: Springer Series in Materials Science, Austenitic TRIP/TWIP Steels and Steel-Zirconia Composites, 298 (2020), pp. 223-255, Hrsg.: Horst Biermann, Christos C. G. Aneziris, Verlag: Springer Nature Switzerland AG, Cham, Switzerland, ISBN 978-3-030-42602-6, ISBN 978-3-030-42603-3 (eBook), DOI: 10.1007/978-3-030-42603-3
  • Korobeinikov, I., Chaves, H., Volkova, O.
    Tailoring of Thermophysical Properties of New TRIP/TWIP Steel Alloys to Optimize Gas Atomization, Chapter 3, in: Springer Series in Materials Science, Austenitic TRIP/TWIP Steels and Steel-Zirconia Composites, 298 (2020), pp. 77-112, Hrsg.: Horst Biermann, Christos C. G. Aneziris, Verlag: Springer Nature Switzerland AG, Cham, Switzerland, ISBN 978-3-030-42602-6, ISBN 978-3-030-42603-3 (eBook), DOI: 10.1007/978-3-030-42603-3
  • Korobeinikov, I., Chebykin, D., Seetharaman, S., Volkova, O.
    Effect of Boron Micro‑alloying on the Surface Tension of Liquid Iron and Steel Alloys, International Journal of Thermophysics, 12th Asian Thermophysical Properties Conference, 41 (2020) 56, pp. 1-14, DOI: 10.1007/s10765-020-02628-5
  • Krause, D., Krüger, L.
    Determination of subsequent yield loci by combined tension-torsion-loading and influence of state of stress on the TRIP effect of hot pressed metastable austenitic steel grade CrMnNi16-7-3, Materials Science & Engineering A, 769 (2020) 138493, pp. 1-6, DOI: 10.1016/j.msea.2019.138493
  • Kuprava, A., Saenko, I., Fabrichnaya, O.
    Heat capacity measurement ofC14-ZrMn2 and thermodynamic re-assessment of the Mn–Zr system, CALPHAD, 68 (2020), DOI:10.1016/j.calphad.2020.101745
  • Lehnert, R., Wagner, R., Burkhardt, C., Clausnitzer; P., Weidner, A., Wendler, M., Volkova, O., Biermann, H.
    Microstructural and mechanical characterization of high-alloy quenching and partitioning TRIP steel manufactured by electron beam melting, Materials Science & Engineering A, 794 (2020) 139684, DOI: 10.1016/j.msea.2020.139684
  • Mandel, M., Kietov, V., Krüger, L.
    The Corrosion Behavior of High-Alloy CrMnNi Steels—A Research Work on Electrochemical Degradation in Saltand Acid-Containing Environments, Chapter 17, in: Springer Series in Materials Science, Austenitic TRIP/TWIP Steels and Steel-Zirconia Composites, 298 (2020), pp. 557-584, Hrsg.: Horst Biermann, Christos C. G. Aneziris, Verlag: Springer Nature Switzerland AG, Cham, Switzerland, ISBN 978-3-030-42602-6, ISBN 978-3-030-42603-3 (eBook), DOI: 10.1007/978-3-030-42603-3
  • Mandel, M., Kietov, V., Wendler, M., Krüger, L.
    The Influence of H2SO4-NaCl Electrolyte Composition to the Electrochemical Noise Behaviour of a High-Alloy Cast Steel, Defect and Diffusion Forum, (2020) 400, pp. 75-81, ISSN: 1662-9507
  • Oppelt, M., Aneziris, C. G.
    Slurry-Based Fabrication of Spherical Structures with Zirconium Dioxide and TRIP Steel, Interceram, 69 (2020) 3, pp. 28-32
  • Oppelt, M., Heuer, C., Brachhold, N., Aneziris, C. G.
    Powder Metallurgical Processing of MMC Pressure Springs Based on Zirconia and TRIP Steel, Adv. Eng. Mater., (2020) 2000971, pp. 1-8, DOI: 10.1002/adem.202000971
  • Oppelt, M., Aneziris, C.G.

    Schlickerbasierte Herstellung von Kugelstrukturen auf Basis von Zirkoniumdioxid und TRIP-Stahl, Keramische Zeitschrift, 72 (2020) 3, S. 46-51
  • Prüger, S., Kiefer, B.
    A comparative study of integration algorithms for finite single crystal (visco-)plasticity, International Journal of Mechanical Sciences, 2020, pp. 1-47, DOI: 10.1016/j.ijmecsci.2020.105740
  • Prüger, S., Kiefer, B.
    Towards the Crystal Plasticity Based Modeling of TRIP-Steels—From Material Point to Structural Simulations, Chapter 24, in: Springer Series in Materials Science, Austenitic TRIP/TWIP Steels and Steel-Zirconia Composites, 298 (2020), pp. 793-823, Hrsg.: Horst Biermann, Christos C. G. Aneziris, Verlag: Springer Nature Switzerland AG, Cham, Switzerland, ISBN 978-3-030-42602-6, ISBN 978-3-030-42603-3 (eBook), DOI: 10.1007/978-3-030-42603-3
  • Prüger, S., Kiefer, B.
    Mean-field homogenization based constitutive modeling of austenitic TRIP-steels at the single crystal scale, PAMM · Proc. Appl. Math. Mech., (2020) 20, pp. 1-3, DOI: 10.1002/pamm.202000246
  • Qayyum, F., Guk, S., Prüger, S., Schmidtchen, M., Saenko, I., Kiefer, B., Kawalla, R., Prahl, U.
    Investigating the local deformation and transformation behavior of sintered X3CrMnNi16-7-6 TRIP steel usinga calibrated crystal plasticity-based numerical simulation model, International Journal of Materials Research, 2020, pp. 1-13, DOI: 10.3139/146.111900
  • Radajewski, M, Decker, S., Wendler, M., Krüger, L.
    Influence of solution annealing on microstructure and mechanical properties of a quenched and partitioned steel matrix composite processed by SPS, Materials Science & Engineering A, 799 (2021) 140277, pp. 1-8, DOI: 10.1016/j.msea.2020.140277
  • Rafaja, D., Ullrich, C., Motylenko, M., Martin, S.
    Microstructure Aspects of the Deformation Mechanisms in Metastable Austenitic Steels, Chapter 11, in: Springer Series in Materials Science, Austenitic TRIP/TWIP Steels and Steel-Zirconia Composites, 298 (2020), pp. 325-377, Hrsg.: Horst Biermann, Christos C. G. Aneziris, Verlag: Springer Nature Switzerland AG, Cham, Switzerland, ISBN 978-3-030-42602-6, ISBN 978-3-030-42603-3 (eBook), DOI: 10.1007/978-3-030-42603-3
  • Rähmer, P., Dommaschk, C., Wolf, G.
    Production of Ceramic Steel Composite Castings Through Infiltration, Chapter 4, in: Springer Series in Materials Science, Austenitic TRIP/TWIP Steels and Steel-Zirconia Composites, 298 (2020), pp. 113-137, Hrsg.: Horst Biermann, Christos C. G. Aneziris, Verlag: Springer Nature Switzerland AG, Cham, Switzerland, ISBN 978-3-030-42602-6, ISBN 978-3-030-42603-3 (eBook), DOI: 10.1007/978-3-030-42603-3 
  • Rajendran, M. K., Kuna, M., Budnitzki, M.
    Undercooling versus stress induced martensitic phase transformation: the case of MgO - partially stabilized zirconia, Computational Material Science, 174 (2020) 109460, pp. 1-8
  • Rajendran, M. K., Budnitzki, M., Kuna, M.
    Multi-scale Modeling of Partially Stabilized Zirconia with Applications to TRIP-Matrix Composites, Chapter 21, in: Springer Series in Materials Science, Austenitic TRIP/TWIP Steels and Steel-Zirconia Composites, 298 (2020), pp. 679-721, Hrsg.: Horst Biermann, Christos C. G. Aneziris, Verlag: Springer Nature Switzerland AG, Cham, Switzerland, ISBN 978-3-030-42602-6, ISBN 978-3-030-42603-3 (eBook), DOI: 10.1007/978-3-030-42603-3      
  • Saenko, I., Fabrichnaya, O.
    Heat capacity measurements of the δ-phase Mg2Zr4.2Ti0.8O12 and thermodynamic modelling of the ZrO2–TiO2–MgO system, Journal of the European Ceramic Society, (2020), pp. 1-10, DOI: 10.1016/j.jeurceramsoc.2020.02.047
  • Saenko, I., Fabrichnaya, O.
    Thermodynamic Modelling in the Frames of the TRIP-Matrix-Composite Development, Chapter 19, in: Springer Series in Materials Science, Austenitic TRIP/TWIP Steels and Steel-Zirconia Composites, 298 (2020), pp. 621-649, Hrsg.: Horst Biermann, Christos C. G. Aneziris, Verlag: Springer Nature Switzerland AG, Cham, Switzerland, ISBN 978-3-030-42602-6, ISBN 978-3-030-42603-3 (eBook), DOI: 10.1007/978-3-030-42603-3
  • Sebastian, T., Preisker, T. R., Gorjan, L., Graule, T., Aneziris, C. G., Clemens, F. J.
    Synthesis of hydroxyapatite fibers using electrospinning: A study of phase evolution based on polymer matrix, Journal of the European Ceramic Society, 2020, DOI: 10.1016/j.jeurceramsoc.2020.01.070
  • Seupel, A., Burgold, A., Prüger, S., Budnitzki, M., Kuna, M.
    Modeling of the Thermomechanical Behavior, Damage, and Fracture of High Alloy TRIP-Steel, Chapter 22, in: Springer Series in Materials Science, Austenitic TRIP/TWIP Steels and Steel-Zirconia Composites, 298 (2020), pp. 723-769, Hrsg.: Horst Biermann, Christos C. G. Aneziris, Verlag: Springer Nature Switzerland AG, Cham, Switzerland, ISBN 978-3-030-42602-6, ISBN 978-3-030-42603-3 (eBook), DOI: 10.1007/978-3-030-42603-3
  • Spitzenberger, A., Neumann, S., Heinrich, M., Schwarze, R.
    Particle detection in VOF-simulations with OpenFOAM, SoftwareX, 11 (2020) 100382
  • Strobl, R., Budnitzki, M., Sandfeld, S.
    Properties of Phase Microstructures and Their Interaction with Dislocations in the Context of TRIP Steel Systems, Chapter 23, in: Springer Series in Materials Science, Austenitic TRIP/TWIP Steels and Steel-Zirconia Composites, 298 (2020), pp. 771-792, Hrsg.: Horst Biermann, Christos C. G. Aneziris, Verlag: Springer Nature Switzerland AG, Cham, Switzerland, ISBN 978-3-030-42602-6, ISBN 978-3-030-42603-3 (eBook), DOI: 10.1007/978-3-030-42603-3
  • Weidner, A.
    Deformation processes in TRIP/TWIP steels: In situ characterization techniques, Springer Series in Materials Science, Verlag: SpringerNatur, 2020, ISBN 978-3-030-37148-7
  • Weidner, A., Lehnert, R., Biermann, H.
    Scanning Electron Microscopy and Complementary In Situ Characterization Techniques for Characterization of Deformation and Damage Processes, Chapter 15, in: Springer Series in Materials Science, Austenitic TRIP/TWIP Steels and Steel-Zirconia Composites, 298 (2020), pp. 485-527, Hrsg.: Horst Biermann, Christos C. G. Aneziris, Verlag: Springer Nature Switzerland AG, Cham, Switzerland, ISBN 978-3-030-42602-6, ISBN 978-3-030-42603-3 (eBook), DOI: 10.1007/978-3-030-42603-3
  • Weidner, A., Fischer, K., Biermann, H. 
    Ultrafine-grained CrMnNi steels: Lueders phenomenon and texture inheritance, Materials Science & Engineering A, 799 (2021) 140197, pp. 1-17, DOI: 10.1016/j.msea.2020.140197
  • Weidner, A., Biermann, H.
    Review on Strain Localization Phenomena Studied by High-Resolution Digital Image Correlation, Adv. Eng. Mater., (2021) 2001409, pp. 1-27, DOI: 10.1002/adem.202001409
  • Weigelt, C., Oppelt, M., Aneziris, C. G.
    Ceramic Extrusion Technologies for Fine Grained TRIP Matrix Composite Materials, Chapter 5, in: Springer Series in Materials Science, Austenitic TRIP/TWIP Steels and Steel-Zirconia Composites, 298 (2020), pp. 139-166, Hrsg.: Horst Biermann, Christos C. G. Aneziris, Verlag: Springer Nature Switzerland AG, Cham, Switzerland, ISBN 978-3-030-42602-6, ISBN 978-3-030-42603-3 (eBook), DOI: 10.1007/978-3-030-42603-3
  • Weigelt, C., Kerber, F., Baumgart, C., Krüger, L., Aneziris, C. G.

    Investigations on Oxide Particles Formed during Sintering of CrMnNi-Transformation-Induced Plasticity (TRIP) Steel Powder Metallurgically Materials Using Automatic Feature Analysis, Adv. Eng. Mater., (2020) 2001215, pp. 1-11, DOI: 10.1002/adem.202001215
  • Wolf, C. H., Burgold, A., Henkel, S., Kuna, M., Biermann, H.
    Crack growth behaviour in biaxial stress fields: calculation of K-factors for cruciform specimens, Theoretical and Applied Fracture Mechanics, 107 (2020), p. 102521
  • Wolf, C. H., Henkel, S., Burgold, A., Qiu, Y., Kuna, M., Biermann, H.
    Kreuzproben zur Untersuchung des Risswachstums bei ein- und mehrachsiger Ermüdungsbeanspruchung, 52. Tagung des DVM Arbeitskreises Bruchmechanik und Bauteilsicherheit, 18.-19.02.2020, DVM-Bericht 252 (2020), pp. 41-50 ISSN 2366-4797
  • Wolf, C. H., Henkel, S., Biermann, H.
    Behaviour of Metastable and Stable Austenitic Stainless Steels Under Planar-Biaxial Load, Chapter 14, in: Springer Series in Materials Science, Austenitic TRIP/TWIP Steels and Steel-Zirconia Composites, 298 (2020), pp. 451-483, Hrsg.: Horst Biermann, Christos C. G. Aneziris, Verlag: Springer Nature Switzerland AG, Cham, Switzerland, ISBN 978-3-030-42602-6, ISBN 978-3-030-42603-3 (eBook), DOI: 10.1007/978-3-030-42603-3

2019

  • Baumgart, C., Weigelt, C., Wendler, M., Saenko, I., Aneziris, C. G., Volkova, O., Krüger, L.
    Challenges in Pressureless Sintering of Interstitially Alloyed TRIP Steel and Resulting Mechanical Properties, Adv. Eng. Mater., 21 (2019) 5, pp. 1-8, DOI: 10.1002/adem.201800700
  • Biermann, H.
    Editorial - TRIP-Matrix-Composites, Adv. Eng. Mater., (2019) 1900126, pp. 1-1, DOI: 10.1002/adem.201900126
  • Borrmann, S., Kratzsch, C., Halbauer, L., Buchwalder, A., Biermann, H., Saenko, I., Chattopadhyay, K., Schwarze, R.
    Electron beam welding of CrMnNi-steels: CFD-modeling with temperature sensitive thermophysical properties, International Journal of Heat and Mass Transfer, 139 (2019), pp. 442–455
    DOI: 10.1016/j.ijheatmasstransfer.2019.04.125
  • Borrmann, S., Asad, A., Halbauer, L., Buchwalder, A., Biermann, H., Schwarze, R.
    Numerical Simulation of the Particle Displacement during Electron Beam Welding of a Dissimilar Weld Joint with TRIP-Matrix-Composite, Adv. Eng. Mater., 21 (2019) 5, pp. 1-9, DOI: 10.1002/adem.201800741
  • Decker, S., Krüger, L.
    Influence of high-energy ball milling on Mg-PSZ-reinforced TRIP steel-matrix composites synthesized by FAST/SPS, Materials Science and Engineering A, 761 (2019), 137974, pp. 1-8, DOI: 10.1016/j.msea.2019.05.104
  • Droste, M., Wendler, M., Volkova, O., Biermann, H.
    Cyclic Deformation Behavior of an Ultra-High Strength Austenitic-Martensitic Steel Treated by Novel Q&P Processing, Adv. Eng. Mater., 21 (2019) 5, pp. 1-10, DOI: 10.1002/adem.201800732
  • Eckner, R., Krüger, L., Ullrich, C., Wendler, M., Volkova, O. 
    Fracture toughness of high-alloy austenitic-martensitic TRIP steels after Q&P processing, International Journal of Fracture, (2019) 215, pp. 139-151, ISSN: 0376-9429, DOI: 10.1007/s10704-018-0332-5
  • Halbauer, L., Laubstein, R., Radajewski, M., Buchwalder, A., Krüger, L., Biermann, H.
    Electron Beam Welding and Characterization of Dissimilar Joints with TWIP Matrix Composites, Adv. Eng. Mater., 21 (2019) 5, pp. 1-10, DOI: 10.1002/adem.201800586
  • Hauser, M., Wendler, M., Weiß, A., Volkova, O., Mola, J.
    On the Critical Driving Force for Deformation-Induced α'-Martensite Formation in Austenitic Cr–Mn–Ni Steels, Adv. Eng. Mater., 21 (2019) 5, pp. 1-6,
    DOI: 10.1002/adem.201800676
  • Kietov, V., Mandel, M., Krüger, L.
    Combination of Electrochemical Noise and Acoustic Emission for Analysis of the Pitting Corrosion Behavior of an Austenitic Stainless Cast Steel, Adv. Eng. Mater., 21 (2019) 5, pp. 1-6, DOI: 10.1002/adem.201800682
  • Kirschner, M., Guk, S., Kawalla, R., Prahl, U.
    Further Development of Process Maps for TRIP Matrix Composites during Powder Forging, Materials Science Forum, 949 (2019), pp. 15-23, ISSN: 1662-9752, DOI: 10.4028/www.scientific.net/MSF.949.15
     
  • Kirschner, M., Eckner, R., Guk, S., Krüger, L., Kawalla, R., Prahl, U.
    Deformation Behavior of Particle Reinforced TRIP Steel/MgPSZ Composite at Hot Working Temperatures, steel research int., 90 (2019) 1800334, pp. 1-6, DOI: 10.1002/srin.201800334
  • Korobeinikov, I., Perminov, A., Heller, H.-P., Volkova, O.
    Inert Gas Atomization of High-Nitrogen TRIP-Steels, Adv. Eng. Mater., 21 (2019) 5, pp. 1-7, DOI: 10.1002/adem.201800753
  • Krause, D., Eckner, R., Krüger, L.
    Influence of Work-Hardening and Lower Temperatures on the Yield Stress of Austenitic Stainless Steel X2CrNi18-10 under Combined Tension-Torsion Loading, Adv. Eng. Mater., 21 (2019) 5, pp. 1-8, DOI: 10.1002/adem.201800663
  • Laubstein, R., Halbauer, L., Martin, S., Klemm, V., Zenker, R., Buchwalder, A., Biermann, H.
    Quality of dissimilar welded particle-reinforced TRIP/TWIP steels generated by electron beam braze-welding, Welding in the World, (2019) DOI:10.1007/s40194-019-00780-7
  • Lehnert, R., Weidner, A., Motylenko, M., Biermann, H.
    Strain Hardening of Phases in High-Alloy CrMnNi Steel as a Consequence of Pre-Deformation Studied by Nanoindentation, Adv. Eng. Mater., (2019) 1800801, pp. 1-14, DOI: 10.1002/adem.201800801
  • Lehnert, R., Weidner. A., Schimpf, C., Wendler, M., Biermann, H.
    Martensite formation during tensile deformation of high-alloy TRIP steel after quenching and partitioning route investigated by digital image correlation, Materialia, 8 (2019) 100498, pp. 1-13 
  • Mandel, M., Kietov, V., Krüger, L.
    Discrete Wavelet Analysis of Electrochemical Current Noise of a High-Alloy Cast Steel in Sulfuric Acid and Sodium Chloride Solution, Diffusion Foundations, 22 (2019), pp. 48-54, ISSN: 2296-3642, doi:10.4028/www.scientific.net/DF.22.48
  • Mukhamedov, B. O., Saenko, I., Ponomareva, A. V., Kriegel, M. J., Chugreev, A., Udovsky, A., Fabrichnaya, O., Abrikosov, I. A.
    Thermodynamic and physical properties of Zr3Fe and ZrFe2 intermetallic compounds, Intermetallics, (2019), DOI:10.1016/j.intermet.2019.01.018
  • Nam, A., Turdimatov, M., Kawalla, R., Prahl, U.
    Inter-Pass Softening Behavior of Fe–16Cr–xMn–4Ni–0.05C–0.17N Steel, Adv. Eng. Mater., 21 (2019) 5, pp. 1-8, DOI: 10.1002/adem.201800692
  • Oppelt, M., Leißner, T., Berek, H., Baumgart, C., Krüger, L., Peuker, U., Aneziris, C. G.
    Processing and Characterization of Beads with Graded Layer Compositions Based on Zirconia and TRIP-Steel, Adv. Eng. Mater., 21 (2019) 5, pp. 1-9, DOI: 10.1002/adem.201800615
  • Qiu, Y., Kaden, N., Schmidtchen, M., Prahl, U., Biermann, H., Weidner, A.
    Laminated TRIP/TWIP Steel Composites Produced by Roll Bonding, Metals, 9 (2019) 195, pp. 1-18, DOI: 10.3390/met9020195
  • Radajewski, M., Eckner, R., Decker, S., Wendler, M., Krüger, L.
    Influence of Temperature and Strain Rate during Thermomechanical Treatment of a Metastable Austenitic TRIP Steel Compacted by SPS/FAST, Adv. Eng. Mater., 21 (2019) 5, pp. 1-9, DOI: 10.1002/adem.201800617
  • Radajewski, M., Decker, S., Krüger, L.
    Direct temperature measurement via thermocouples within an SPS/FAST graphite tool, Measurement, 147 (2019) 106863, pp. 1-7, DOI: 10.1016/j.measurement.2019.106863
  • Rahimi, R., Volkova, O., Biermann, H., Mola, J.
    Thermal Analysis of the Formation and Dissolution of Cr-Rich Carbides in Al-Alloyed Stainless Steels, Adv. Eng. Mater., 21 (2019) 5, pp. 1-7, DOI: 10.1002/adem.201800658
  • Saenko, I., Tsukrenko, V., Ilatovskaia, M., Pavlyuchkov, D., Savinykh, G., Fabrichnaya, O.
    Experimental Investigation of Phase Equilibria in the ZrO2–TiO2–MgO System, Adv. Eng. Mater., 21 (2019) 5, pp. 1-17, DOI: 10.1002/adem.201800655
  • Saenko, I., Kuprava, A., Udovsky, A., Fabrichnaya, O.
    Heat capacity measurement of Zr2Fe and thermodynamic re-assessment of the Fe–Zr system, Calphad, 66 (2019) 101625, DOI:10.1016/j.calphad.2019.05.002
  • Seupel, A., Kuna, M.
    A gradient-enhanced damage model motivated by engineering approaches to ductile failure of steels, International Journal of Damage Mechanics, (2019), DOI: 10.1177/1056789518823879
  • Turdimatov, M., Nam, A., Kawalla, R., Prahl, U.
    Modeling of Microstructural Evolution in the Hot Rolling Process of Fe-16Cr-4Mn-4Ni-0.05C-0.17N Austenitic Stainless Steel, Materials Science Forum, 949 (2019), pp. 93-100, ISSN: 1662-9752,
    DOI: 10.4028/www.scientific.net/MSF.949.93
     
  • Ullrich, C., Martin, S., Schimpf, C., Stark, A., Schell, N., Rafaja, D.
    Deformation Mechanisms in Metastable Austenitic TRIP/TWIP Steels under Compressive Load Studied by in situ Synchrotron Radiation Diffraction, Adv. Eng. Mater., 21 (2019) 5, pp. 1-9, DOI: 10.1002/adem.201801101
  • Weiß, A.
    Verfahren zur Herstellung eines hochfesten bzw. höchstfesten Formteils aus härtbarem Stahl, Patentschrift DE11 2014 004 087.8, 2019
  • Wendler, M., Hauser, M., Motylenko, M., Mola, J., Krüger, L., Volkova, O.
    Ultra High Strength Stainless Steels Obtained by Quenching-Deformation-Partitioning (QDP) Processing, Adv. Eng. Mater., 21 (2019) 5, pp. 1-12, DOI: 10.1002/adem.201800571
  • Wolf, C. H., Henkel, S., Burgold, A., Qiu, Y., Kuna, M., Biermann, H.
    Fatigue Crack Growth in Austenitic Stainless Steel: Effects of Phase Shifted Loading and Crack Paths, Adv. Eng. Mater., 21 (2019) 5, pp. 1-12, DOI: 10.1002/adem.201800861
  • Wolf, C. H., Henkel, S., Burgold, A., Qiu, Y., Kuna, M., Biermann, H.
    Investigation of fatigue crack growth under in-phase loading as well as phase-shifted loading using cruciform specimens, International Journal of Fatigue, 124 (2019), pp. 595-614, DOI: 10.1016/j.ijfatigue.2019.03.011

2018

  • Baumgart, C., Halle, T., Weigelt, C., Krüger, L., Aneziris, C. G.
    Effect of honeycomb cell geometry on compressive properties: Finite element analysis and experimental verification, Science and Technology of Materials, 30 (2018), pp. 35–42, DOI: 10.1016/j.stmat.2018.02.001
     
  • Baumgart, C., Weigelt, C., Aneziris, C. G., Krüger, L.
    Mechanical properties of high-density TRIP steel honeycomb structures with varying cell profiles under different loading conditions, EPJ Web of Conferences, 183 (2018), DYMAT 2018, pp. 1-6, DOI: 10.1051/epjconf/201818303014
     
  • Baumgart, C., Weigelt, C., Wendler, M., Saenko, I., Aneziris, C. G., Volkova, O., Krüger, L.
    Challenges in Pressureless Sintering of Interstitially Alloyed TRIP Steel and Resulting Mechanical Properties, Adv. Eng. Mater., (2018) 1800700, pp. 1-8, DOI: 10.1002/adem.201800700 

  • Berek, H., Aneziris, C. G.
    Effect of focused ion beam sample preparation on the phase composition of zirconia, Ceramics International, (2018), pp. 1-12, DOI: 10.1016/j.ceramint.2018.06.226
  • Borrmann, S., Asad, A., Halbauer, L., Buchwalder, A., Biermann, H., Schwarze, R.
    Numerical Simulation of the Particle Displacement during Electron Beam Welding of a Dissimilar Weld Joint with TRIP-Matrix-Composite, Adv. Eng. Mater., (2018) 1800741, pp. 1-9, DOI: 10.1002/adem.201800741
  • Burgold, A., Henkel, S., Roth, S., Kuna, M., Biermann, H.
    Fracture mechanics testing and crack growth simulation of highly ductile austenitic steel, Materials Testing, 60 (2018) 4, pp. 341-348, DOI 10.3139/120.111156, ISSN 0025-5300
  • Burgold, A., Henkel, S., Roth, S., Kuna, M., Biermann, H.
    Experimentelle und numerische Untersuchung eines hochduktilen austenitischen Gussstahles, In: 50. Tagung Arbeitskreis Bruchvorgänge, DVM-Bericht, 250 (2018), pp. 217-226, ISSN 2366-4797
  • Burgold, A., Roth, S., Kuna, M.
    Cohesive Zone Modeling of Stable Crack Propagation in Highly Ductile Steel, Key Engineering Materials, 774 (2018), pp. 167-172, ISSN: 1662-9795, DOI:10.4028/www.scientific.net/KEM.774.167
     
  • Droste, M., Ullrich, C., Motylenko, M., Fleischer, M., Weidner, A., Freudenberger, J., Rafaja, D., Biermann, H.
    Fatigue behavior of an ultrafine-grained metastable CrMnNi steel tested under total strain control, International Journal of Fatigue, 106 (2018), pp. 143–152, DOI: 10.1016/j.ijfatigue.2017.10.001
  • Droste, M., Günther, J., Kotzem, D., Walther, F., Niendorf, T., Biermann, H.
    Cyclic deformation behavior of a damage tolerant CrMnNi TRIP steel produced by electron beam melting, International Journal of Fatigue, 114 (2018), pp. 262-271, DOI: 10.1016/j.ijfatigue.2018.05.031
  • Droste, M., Wendler, M., Volkova, O., Biermann, H.
    Cyclic Deformation Behavior of an Ultra-High Strength Austenitic-Martensitic Steel Treated by Novel Q&P Processing, Adv. Eng. Mater., (2018) 1800732, pp. 1-10, DOI: 10.1002/adem.201800732
  • Eckner, R., Krüger, L., Motylenko, M., Savinykh, A. S., Razorenov, S. V., Garkushin, G. V.
    Deformation mechanisms and microplasticity of austenitic TRIP/TWIP steel under flyer plate impact, EPJ Web of Conferences, 183 (2018), DYMAT 2018, pp. 1-6, DOI: 10.1051/epjconf/201818303007 
  • Ehinger, D., Weise, J., Baumeister, J., Funk, A., Waske, A., Krüger, L., Martin, U.
    Microstructure and Deformation Response of TRIP-Steel Syntactic Foams to Quasi-Static and Dynamic Compressive Loads, Materials, 656 (2018) 11, pp. 1-22, DOI:10.3390/ma11050656
  • Güler, S., Schymura, M., Fischer, A., Droste, M., Biermann, H.
    The influence of the nitrogen/nickel-ratio on the cyclic behavior of austenitic high strength steels with twinning-induced plasticity and transformation-induced plasticity effects, Mat.-wiss. u. Werkstofftech., 49 (2018), pp. 61–72, DOI: 10.1002/mawe.201700107
    Günther, J., Brenne, F., Droste, M., Wendler, M., Volkova, O., Biermann, H., Niendorf, T.
    Design of novel materials for additive manufacturing - Isotropic microstructure and high defect tolerance, Scientific Reports, (2018), pp. 1-14, DOI:10.1038/s41598-018-19376-0
  • Halbauer, L., Proksch, P., Buchwalder, A., Zenker, R., Biermann, H.
    Joining of TWIP-matrix composites by electron beam brazing, Weld World, 62 (2018), pp. 19-27
  • Halbauer, L., Laubstein, R., Radajewski, M., Buchwalder, A., Krüger, L., Biermann, H.
    Electron Beam Welding and Characterization of Dissimilar Joints with TWIP Matrix Composites, Adv. Eng. Mater., (2018) 1800586, pp. 1-10, DOI: 10.1002/adem.201800586
  • Hauser, M., Wendler, M., Weiß, A., Volkova, O., Mola, J.
    On the Critical Driving Force for Deformation-Induced α'-Martensite Formation in Austenitic Cr–Mn–Ni Steels, Adv. Eng. Mater., (2018) 1800676, pp. 1-6, DOI: 10.1002/adem.201800676
  • Henkel, S., Wolf, C. H., Biermann, H.
    Cruciform specimens as a tool to investigate fatigue crack growth behavior of metals, Proceedings of the 6th International Conference on CRACK PATHS, Conference USB flash drive, 2018, pp. 311-316
  • Kietov, V., Mandel, M., Krüger, L. 
    Combination of Electrochemical Noise and Acoustic Emission for Analysis of the Pitting Corrosion Behavior of an Austenitic Stainless Cast Steel, Adv. Eng. Mater., (2018) 1800682, pp. 1-6, DOI: 10.1002/adem.201800682
  • Korobeinikov, I., Perminov, A., Heller, H.-P., Volkova, O.
    Inert Gas Atomization of High-Nitrogen TRIP-Steels, Adv. Eng. Mater., (2018) 1800753, pp. 1-7, DOI: 10.1002/adem.201800753
  • Krause, D., Eckner, R., Krüger, L. 
    Influence of Work-Hardening and Lower Temperatures on the Yield Stress of Austenitic Stainless Steel X2CrNi18-10 under Combined Tension-Torsion Loading, Adv. Eng. Mater., (2018) 800663, pp. 1-8, DOI: 10.1002/adem.201800663
  • Linderov, M. L., Segel, C., Weidner, A., Biermann, B., Vinogradov, A. Yu.
    Study of Deformation Phenomena in TRIP/TWIP Steels by Acoustic Emission and Scanning Electron Microscopy, PHYSICS OF METALS AND METALLOGRAPHY, 119 (2018) 4, pp. 388-395, ISSN 0031-918X 
  • Mirzajanzadeh, M., Canadinc, D., Niendorf, T., Weidner, A.
    A Novel Approach for Monitoring Plastic Flow Localization during In-Situ Sem Testing of Small-Scale Samples, Exp Tech, (2018) 42, pp. 177–189, DOI 10.1007/s40799-017-0212-3 
  • Nam, A., Turdimatov, M., Kawalla, R., Prahl, U.
    The Kinetics of Dynamic Recrystallization of Fe–16Cr–xMn–4Ni–0.05C–0.17N Steel, steel research int., (2018) 1800309; pp. 1-7, DOI: 10.1002/srin.201800309
  • Nam, A., Turdimatov, M., Kawalla, R., Prahl, U.
    Inter-Pass Softening Behavior of Fe–16Cr–xMn–4Ni–0.05C–0.17N Steel, Adv. Eng. Mater., (2018) 1800692, pp. 1-8, DOI: 10.1002/adem.201800692
  • Oppelt, M., Leißner, T., Berek, H., Baumgart, C., Krüger, L., Peuker, U., Aneziris, C. G.
    Processing and Characterization of Beads with Graded Layer Compositions Based on Zirconia and TRIP-Steel, Adv. Eng. Mater., (2018) 201800615, pp. 1-9, DOI: 10.1002/adem.201800615
  • Radajewski, M., Eckner, R., Decker, S., Wendler, M., Krüger, L.
    Influence of Temperature and Strain Rate during Thermomechanical Treatment of a Metastable Austenitic TRIP Steel Compacted by SPS/FAST, Adv. Eng. Mater., (2018) 1800617, pp. 1-9, DOI: 10.1002/adem.201800617
  • Saenko, I., Ilatovskaia, M., Savinykh, G., Fabrichnaya, O.
    Experimental investigation of phase relations and thermodynamic properties in the ZrO2–TiO2 system, Journal of American Ceramic Society, 101 (2018), 386-399. DOI: 10.1111/jace.15176
  • Sandig, E. F., Hauser, M., Wendler, M., Prutchykova, V. V., Weiß, A.
    Magnetic measurement of strain-induced martensite formation in Fe–30Nisteel, Materials Science and Technology, pp. 1-9, DOI: 10.1080/02670836.2018.1465507
  • Schröder, C., Weiß, A., Volkova, O.
    Development of a new stainless austenitic CrMnNi steel using TRIP/TWIP effect for a high cold formability, Materialwiss. Werkstofftech., (2018) 49, pp. 577–590, DOI 10.1002/mawe.201700278
  • Seupel, A., Hütter, G., Kuna, M.
    An efficient FE-implementation of implicit gradient-enhanced damage models to simulate ductile failure, Engineering Fracture Mechanics, (2018), DOI: https://doi.org/10.1016/j.engfracmech.2018.01.022
  • Ullrich, C., Martin, S., Schimpf, C., Stark, A., Schell, N., Rafaja, D. 
    Deformation Mechanisms in Metastable Austenitic TRIP/TWIP Steels under Compressive Load Studied by in situ Synchrotron Radiation Diffraction, Adv. Eng. Mater., (2018) 1801101, pp. 1-9, DOI: 10.1002/adem.201801101
  • Wendler, M., Hauser, M., Sandig, E. F., Volkova, O.
    Estimation of the Temperature-Dependent Nitrogen Solubility in Stainless Fe-Cr-Mn-Ni-Si-C Steel Melts During Processing, METALLURGICAL AND MATERIALS TRANSACTIONS B, (2017), DOI: 10.1007/s11663-017-1165-8
  • Wendler, M., Eckner, R., Baumgart, C., Biermann, C., Oppelt, M., Weigelt, C., Michel, P.
    Leichtbau durch Verbundwerkstoffe, dialog - Materialwissenschaft und Werkstofftechnik, 1 (2018), pp. 90-97, Hrsg.: DGM Deutsche Gesellschaft für Materialkunde e.V., Dr.-Ing. Frank O. R. Fischer, ALPHA Informationsgesellschaft mbH, ISSN 2193-3383
  • Wendler, M., Hauser, M., Motylenko, M., Mola, J., Krüger, L., Volkova, O.
    Ultra High Strength Stainless Steels Obtained by Quenching-Deformation-Partitioning (QDP) Processing, Adv. Eng. Mater., (2018) 1800571, pp. 1-12, DOI: 10.1002/adem.201800571
  • Wolf, C. H., Henkel, S., Qiu, Y., Ackermann, S., Biermann, H., Burgold, A., Kuna, M.
    Fatigue crack growth under in-phase loading as well as 180°  phase-shifted loading of austenitic stainless steel, Proceedings of the 6th International Conference on CRACK PATHS, Conference USB flash drive, 2018, pp. 341-346 
  • Wolf, C. H., Henkel, S., Burgold, A., Qiu, Y., Kuna, M., Biermann, H.
    Fatigue Crack Growth in Austenitic Stainless Steel: Effects of Phase Shifted Loading and Crack Paths, Adv. Eng. Mater., (2018) 1800861, pp. 1-12, DOI: 10.1002/adem.201800861

2017

  • Aneziris, C., Scheller, P., Biermann, H.
    Verbundwerkstoff aus Metall und Keramik, Verfahren zu dessen Herstellung, seineVerwendung sowie Energieabsorptionsbauteil, Patentschrift DE 11 2007 000 923 B4, Deutsches Patent- und Markenamt, München, 2017
  • Biermann, H., Michel, P., Jahn, A., Wendler, M., Kirmse, C., Weigelt, C., Hauser, M., Yanina, A., Decker, S., Oppelt, M., Saenko, I., Pranke, K., Weider, M., Acker, R., Klostermann, J., Buchwalder, A., Ullrich, C., Prüger, S., Martin, S., Glage, A., Weidner, A., Mantel, M.
    Visionen aus Stahl und Keramik, ACAMONTA, 24 (2017), S. 17-32, Hrsg.: Freunde und Förderer der TU Bergakademie Freiberg e. V., Rektor der TU Bergakademie Freiberg, ISSN: 2193-309X
  • Decker, S., Krüger, L.
    Mechanical properties of a CrMnNi steel/Mg-PSZ-FGM processed by asymmetric Spark Plasma Sintering, Materials and Design, 115 (2017), pp. 8-16, DOI: 10.1016/j.matdes.2016.11.046
  • Decker, S., Krüger, L.
    Dynamic flow stress behavior of a 5 vol.% Mg-PSZ reinforced TRIP matrix composite at ambient temperature and −40 °C, Materials and Design, 114 (2017), pp. 47–54, DOI: 10.1016/j.matdes.2016.10.045
  • Dilner, D., Pavlyuchkov, D., Zienert, T., Kjellqvist, L., Fabrichnaya, O.
    Thermodynamics of the Mg-Mn-O system—modeling and heat capacity measurements, J. Am. Ceram. Soc., 2017, pp. 1-12, DOI: 10.1111/jace.14686
  • Droste, M., Ullrich, C., Motylenko, M., Fleischer, M., Weidner, A. Freudenberger, J., Rafaja, D., Biermann, H.: Fatigue behavior of an ultrafine-grained metastable CrMnNi steel tested under total strain control, International Journal of Fatigue, 106 (2018), pp. 143–152, DOI: 10.1016/j.ijfatigue.2017.10.001
  • Eckner, R., Krüger, L. 
    High strain rate compression testing of hot-pressed TRIP/TWIP-Matrix-Composites, Key Engineering Materials 742 (2017), S. 113-120, DOI: 10.4028/www.scientific.net/KEM.742.113
  • Härtel, M., Pfeiffer, S., Schmaltz, S., Söhngen, B., Kulawinski, D., Willner, K., Henkel, S., Biermann, H., Wagner, M. F.-X.
    On the identification of an effective cross section for a cruciform specimen, Strain, (2017) e12257, pp. 1-12, DOI:10.1111/str.12257 
  • Mandel, M., Kietov, V., Dubberstein, T., Krüger, L.
    The Potentiodynamic Polarisation of a High-Alloy Steel—An Analysis by Acoustic Emission Testing and Long-Distance Microscopy, Electrochimica Acta, 240 (2017), pp. 350–360, DOI: 10.1016/j.electacta.2017.04.091
  • Martin, S., Reichel, B., Motylenko, M., Ullrich, C., Wendler, M., Hauser, M., Mola, J., Rafaja, D.
    The influence of interstitial solid solution strengthening and (V, Cr)N precipitation on work hardening in metastable austenitic CrMnNi TRIP steels, Proceedings of the 38th Ris0 International Symposium on Materials Science, pp. 330-340, 2017, Roskilde Denmark, Hrsg.: S. Dhar, S. Fcester, A. Godfrey, N. Hansen, C. Hong, X. Huang, D. Juul Jensen, O. V. Mishin, T. Yu, Y. Zhang, Department of Wind Energy Technical University of Denmark, ISBN 978-87-93549-17-3, ISSN 0907-0079
  • Michel, P.
    Stahl-Keramik-Verbundwerkstoffe, Ingenieurnachrichten, 06 (2017), S. 27 
  • Mirzajanzadeh, M., Canadinc, D., Niendorf, T., Weidner, A.
    A Novel Approach for Monitoring Plastic Flow Localization during In-Situ Sem Testing of Small-Scale Samples, Exp Tech, 2017, DOI: 10.1007/s40799-017-0212-3 
  • Mola, J.
    Considerations in the Design of Formable Austenitic Stainless Steels Based on Deformation-Induced Processes, in: Austenitic Stainless Steels - New Aspects, 2017, pp. 7-28, InTech, DOI: 10.5772/intechopen.70939
  • Seupel, A., Kuna, M.
    Phenomenological modeling of strain hardening, phase transformation and damage effects of TRIP-steels, XIV International Conference on Computational Plasticity. Fundamentals and Applications. COMPLAS XIV. 2017, pp. 576-587, ISBN: 978-84-946909-6-9
  • Tuchscheerer, F., Krüger, L.
    Influence of Cold Deformation and Phase Transformation on the Electrochemical Corrosion Behavior of Nitrogen-Alloyed Stainless Steel in Chloride Solution, steel research int., 87 (2017) 5, DOI: 10.1002/srin.201600510
  • Ullrich, C., Martin, S., Schimpf, C., Stark, A., Schell, N., Rafaja, D.
    In-situ synchrotron radiation studies of the deformation mechanisms in metastable austenitic TRIP/TWIP steels, Advanced Metallic Materials by Microstructural Design - Proceedings of the 38th Ris0 International Symposium on Materials Science, pp. 399-406, 2017, Roskilde, Denmark, Hrsg.: S. Dhar, S. Fcester, A. Godfrey, N. Hansen, C. Hong, X. Huang, D. Juul Jensen, O. V. Mishin, T. Yu, Y. Zhang, Department of Wind Energy Technical University of Denmark, ISBN 978-87-93549-17-3, ISSN 0907-0079
  • Wendler, M., Ullrich, C., Hauser, M., Krüger, L., Volkova, O., Weiß, A., Mola, J.
    Quenching and partitioning (Q&P) processing of fully austenitic stainless steels, Acta Materialia, 133 (2017), pp. 346-355, DOI: 10.1016/j.actamat.2017.05.049
  • Wendler, M., Hauser, M., Weiss, A., Volkova, O., Krüger, L., Mola, J.
    Ultrahochfeste CrMnNi-C-N-Stahlgusslegierungen mit erhöhter Plastizität, 24.Sächsische Fachtagung für Umformtechnik: Werkstoffe und Komponenten für den Fahrzeugbau, 2017, Freiberg, Hrsg.: TU Bergakademie Freiberg, Institut für Metallformung,  ACATRAIN e.V., S. 56-63
  • Wendler, M., Michel, P.
    Von hochduktil bis ultrahochfest – neue austenitische CrMnNi-Stähle des SFB 799, Dresdner Transferbrief, 25 (2017) 02, S. 32

2016

  • Ackermann, S., Martin, S., Schwarz, M. R., Schimpf, C., Kulawinski, D., Lathe, C., Henkel, S., Rafaja, D., Biermann, H., Weidner, A.
    Investigation of Phase Transformations in High-Alloy Austenitic TRIP Steel Under High Pressure (up to 18 GPa) by In Situ Synchrotron X-ray Diffraction and Scanning Electron Microscopy, Met. Mat. Trans. A, 47 (2016), pp. 95-111, DOI: 10.1007/s11661-015-3082-2
  • Ackermann, S., Glage, A., Henkel, S., Biermann, H.
    Ermüdungsverhalten von metastabilen austenitischen Stählen unter ein- und zweiachsiger Beanspruchung, in: Jubiläumsband "Glanzlichter der Forschung an der Technischen Universität Bergakademie Freiberg“, Chemnitzer Verlag, Hrsg.: Groß, U., TU Bergakademie Freiberg, 2016, S. 226-236, ISBN: 978-3-944509-26-6
  • Asad, A., Kratzsch, C., Schwarze, R.
    Numerical Investigation of the Free Surface in a Model Mold, steel research int., 87 (2016) 2, pp. 181-190, DOI: 10.1002/srin.201400600
  • Baumgart, C., Ehinger, D., Weigelt, C., Krüger, L., Aneziris, C. G.
    Comparative study of TRIP/TWIP assisted high density composite honeycomb structures under compressive load, Composite Structures, 136 (2016), pp. 297–304
  • Baumgart, C., Weigelt, C., Krüger, L., Aneziris, C. G.
    Investigations on the sintering response of steel-ceramic Composites, Materials Science and Engineering, 139 (2016) 012013, DOI: 10.1088/1757-899X/139/1/012013
  • Biermann, H., Glage, A., Droste, M.
    Influence of Temperature on Fatigue-Induced Martensitic Phase Transformation in a Metastable CrMnNi-Steel, Met. Mat. Trans. A, 47 (2016), pp. 84-94, DOI: 10.1007/s11661-014-2723-1
  • Biermann, H., Aneziris, C. G.
    Foreword CRC 799 Contribution, Met. Mat. Trans. A, 47 (2016), p. 48
  • Chaves, H., Kirmse, C., Heller, H.-P., Dubberstein, T.
    Vorrichtung und Verfahren zum Zerstäuben von Schmelzen, Offenlegungsschrift DE 10 2015107 876A1 2016.11.24, 2016, Hrsg.: Deutsches Patent- und Markenamt
  • Chebykin, D., Dubberstein, T., Heller, H.-P., Volkova, O.
    Viscosity of iron and iron base alloys at high temperatures, Freiberger Forschungshefte, Metallurgisches Kolloquium zu Ehren von Prof. Dieter Janke, 67. Berg- und Hütten­männischer Tag 2016, S. 124-130, Hrsg.: Olena Volkova, TU Bergakademie Freiberg, ISBN 978-3-86012-530-4
  • Decker, S., Martin, S., Krüger, L.
    Influence of Powder Particle Size on the Compaction Behavior and Mechanical Properties of a High-Alloy Austenitic CrMnNi TRIP Steel During Spark Plasma Sintering, Met. Mat. Trans. A, 47 (2016), pp. 170-177, DOI: 10.1007/s11661-015-2861-0
  • Decker, S., Krüger, L.
    Improved mechanical properties by high-energy milling and Spark Plasma Sintering of a TRIP-matrix composite, Journal of Composite Materials, 50 (2016) 13, pp. 1829–1836, DOI: 10.1177/0021998315597482
  • Dubberstein, T., Schürmann, M., Heller, H.-P., Chaves, H.
    Verfahren zur Bestimmung der Viskosität von Fluiden im Hochtemperaturbereich mittels eines Vibrationskörperviskosimeters und zugehöriges Vibrationviskosimeters, Patentschrift DE 10 2014 015 301 B3 vom 25.02.2016
  • Dubberstein, T., Chebykin, D., Heller, H.-P., Volkova, O.
    Thermophysical Properties of Cr-Mn-Ni Steel Relevant to Powder Metallurgy, Freiberger Forschungshefte, Metallur­gisches Kolloquium zu Ehren von Prof. Dieter Janke, 67. Berg- und Hüttenmännischer Tag 2016, S. 33-41, Hrsg.: Olena Volkova, TU Bergakademie Freiberg, ISBN 978-3-86012-530-4
  • Dubberstein, T., Schürmann, M., Chaves, H., Heller, H.-P. Aneziris, C. G.
    A Novel Vibrating Finger Viscometer for High-Temperature Measurements in Liquid Metals and Alloys, Int. J. Thermophys., 37 (2016), pp. 1–12, doi: 10.1007/s10765-016-2104-7
  • Eckner, R., Reichel, B., Savinykh, A. S., Krüger, L., Razorenov, S. V., Garkushin, G. V.
    Microstructure of CrMnNi Cast Steel After Explosive-Driven Flyer-Plate Impact at Room Temperature and Below, Met. Mat. Trans. A, 47 (2016), pp. 75-83, DOI: 10.1007/s11661-015-3222-8
  • Eckner, R., Krampf, M., Segel, C., Krüger, L.
    Strength and fracture behavior of a particle-reinforced transformation-thoughened TRIP steel/ZrO2 composite, Mechanics of Composite Materials, 51 (2016) 6, pp. 707-720
  • Eckner, R., Krüger, L., Ullrich, C., Rafaja, D., Schlothauer, T., Heide, G.
    Microstructure and Mechanical Properties After Shock Wave Loading of Cast CrMnNi TRIP Steel, Metallurgical and Materials Transactions A, 2016, DOI: 10.1007/s11661-016-3688-z, ISSN: 1073-5623
  • Fabrichnaya, O., Pavlyuchkov, D.
    Assessment of Experimental Data and Thermodynamic Modeling in the Zr-Fe-O System, Met. Mat. Trans. A., 47 (2016), pp. 152-159, DOI: 10.1007/s11661-015-2805-8
  • Fabrichnaya, O., Ullrich, C., Wendler, M., Savinykh, G., Rafaja, D.
    High-temperature phase transformations in strongly metastable austenitic-martensitic CrMnNi N C cast steels, Journal of Alloys and Compounds, 2016, DOI: 10.1016/j.jallcom.2016.06.026
  • Halbauer, L., Buchwalder, A., Zenker, R., Biermann, H.
    The influence of dilution on dissimilar weld joints with high-alloy TRIP/TWIP steels, Welding in the World, ISSN: 0043-2288, DOI: 10.1007/s40194-016-0324-x
  • Halbauer, L., Eckner, R., Wendler, M., Fabrichnaya, O., Buchwalder, A., Krüger, L., Zenker, R., Biermann, H.
    Tensile Behavior of Cast and Electron Beam Welded Interstitially Strengthened High-Alloy TRIP Steel, steel research int., 87 (2016), DOI: 10.1002/srin.201600028
  • Hauser, M., Wendler, M., Weiß, A., Volkova, O., Mola, J.
    Temperature dependent mechanical properties and defor­mation mechanisms of an austenitic Fe-Cr-Mn-Ni-C-N steel with TRIP/TWIP effect, Freiberger Forschungshefte, Metallur­gisches Kolloquium zu Ehren von Prof. Dieter Janke, 67. Berg- und Hüttenmännischer Tag 2016, S. 26-31, Hrsg.: Olena Volkova, TU Bergakademie Freiberg, ISBN 978-3-86012-530-4
  • Hauser, M., Wendler, M., Fabrichnaya, O., Volkova, O., Mola, J.
    Anomalous stabilization of austenitic stainless Steels at cryogenic temperatures, Materials Science & Engineering A, 675 (2016), pp. 415-420, DOI: 10.1016/j.msea.2016.08.080
  • Heinze, D., Buchwalder, A., Jung, A., Weidner, A., Segel, C., Müller, A., Zenker, R., Biermann, H.
    Functionally Graded High-Alloy CrMnNi TRIP Steel Produced by Local Heat Treatment Using High-Energy Electron Beam, Met. Mat. Trans. A, 47 (2016), pp. 123-138, DOI: 10.1007/s11661-015-3017-y
  • Kirmse, C., Chaves, H.
    Measurements of the Velocity of Drops in a Melt Atomization Process Using ParticleImage Velocimetry, steel research int., 87 (2016), DOI: 10.1002/srin.201500360
  • Krüger, L., Ehinger, D., Henschel, S.
    Festigkeits-, Verformungs- und Versagensverhalten ausgewählter Werkstoffe bei unterschiedlichen Beanspruchungsgeschwindigkeiten, in: Glanzlichter der Forschung an der TU Bergakademie Freiberg 250 Jahre nach ihrer Gründung, Chemnitzer Verlag, Freiberg, 2016, Hrsg.: Ulrich Groß, TU Bergakademie Freiberg, S. 55-63, ISBN: 978-3-944509-26-6
  • Mandel, M., Böhme, F., Hauser, M., Wendler, M., Tuchscheerer, F., Krüger, L.
    The Influence of Plastic Deformation on the Corrosion Behavior of a Cast High-Alloy CrMnNi TRIP Steel, steel research int., 87 (2016), DOI: 10.1002/srin.201500406
  • Mandel, M., Kietov, W., Krüger, L.
    Corrosion monitoring of the active/passive/transpassive state of a high-alloy CrMnNi steel by means of acoustic emissions, Defect and Diffusion Forum, 367 (2016), pp. 42-51, ISSN: 1662-9507,
    DOI: 10.4028/www.scientific.net/DDF.367.42
  • Mandel, M., Hoffmann, J., Halbauer, L., Krüger, L., Buchwalder, A., Zenker, R.
    Electrochemical degradation behaviour and FEM analysis of an electron beam-welded steel cast alloy in sodium chloride and in sulphuric acid solution, conference proceedings, EUROCORR 2016, Montpellier, Editor: Les Editions d’Astorg, PRINTCORP, Paris
  • Martin, S., Wolf, S., Martin, U., Krüger, L., Rafaja, D.
    Deformation Mechanisms in Austenitic TRIP/TWIP Steel as a Function of Temperature, Met. Mat. Trans. A, 47 (2016), pp. 49-58, DOI: 10.1007/s11661-014-2684-4
  • Mola, J.
    Design of high-interstitial stainless steels with austenitic and martensitic austenitic microstructures, Freiberger Forschungshefte, Metallurgisches Kolloquium zu Ehren von Prof. Dieter Janke, 67. Berg- und Hütten­männi­scher Tag 2016, S. 57-69, Hrsg.: Olena Volkova, TU Bergakademie Freiberg, ISBN 978-3-86012-530-4
  • Müller, A., Segel, C., Linderov, M., Vinogradov, A., Weidner, A., Biermann, H.
    The Portevin–Le Châtelier Effect in a Metastable Austenitic Stainless Steel, Met. Mat. Trans. A, 47 (2016), pp. 59-74, DOI: 10.1007/s11661-015-2953-x
  • Pavlyuchkov, D., Dilner, D., Savinykh, G., Fabrichnaya, O.
    Phase Equilibria in the ZrO2–MgO–MnOx System, J. Am. Ceram. Soc., 99 (2016) 9, pp. 3136–3145, DOI: 10.1111/jace.14327
  • Sandig, E. F., Hauser, M., Volkova, O., Weiß, A.
    Untersuchung der verformungsinduzierten Martensitbildung in einem hoch legierten Stahl mit 30% Nickel, Freiberger Forschungshefte, Metallurgisches Kolloquium zu Ehren von Prof. Dieter Janke, 67. Berg- und Hüttenmännischer Tag 2016, S. 131-138, Hrsg.: Olena Volkova, TU Bergakademie Freiberg, ISBN 978-3-86012-530-4
  • Schröder, C., Weiß, A.
    Industrielle Fertigung von Feinband aus einem neu entwickelten korrosionsbeständigen CrMnNi-Stahl mit TRIP/TWIP-Effekt, Freiberger Forschungshefte, Metallurgisches Kolloquium zu Ehren von Prof. Dieter Janke, 67. Berg- und Hüttenmännischer Tag 2016, S. 43-55, Hrsg.: Olena Volkova, TU Bergakademie Freiberg, ISBN 978-3-86012-530-4
  • Seupel, A., Eckner, R., Burgold, A., Kuna, M., Krüger, L.
    Experimental characterization and damage modeling of a particle reinforced TWIP-steel matrix composite, Materials Science & Engineering A, 662 (2016), pp. 342–355,
    DOI: 10.1016/j.msea.2016.03.056
  • Ullrich, C., Eckner, R., Krüger, L., Martin, S., Klemm, V., Rafaja, D.
    Interplay of microstructure defects in austenitic steel with medium stacking fault energy, Materials Science & Engineering A, 649 (2016), pp. 390-399, DOI: 10.1016/j.msea.2015.10.021
  • Weigelt, C., Aneziris, C. G., Eckner, R., Krüger, L.: TRIP Steel/Zirconia Composite Materials for Advanced Load Applications, Conference Proceedings, World PM2016, Hamburg
  • Weigelt, C., Schmidt, G., Aneziris, C. G., Eckner, R., Ehinger, D., Krüger, L.: Ullrich, C.; Rafaja, D.: Compressive and tensile deformation behaviour of TRIP steel-matrix composite materials with reinforcing additions of zirconia and/or aluminium titanate, Journal of Alloys and Compounds, (2016,
    DOI 10.1016/j.jallcom.2016.10.176
  • Weiß, A., Gutte, H., Mola, J.
    Contributions of
    ε and α′ TRIP Effects to the Strength and Ductility of AISI 304 (X5CrNi18-10) Austenitic Stainless Steel, Met. Mat. Trans. A, 47 (2016), pp. 112-122, DOI: 10.1007/s11661-014-2726-y
  • Weiß, A., Wendler, M.
    Hochfeste und gleichzeitig zähe Halbzeuge und Bauteile aus hochlegiertem Stahl, Verfahren zu ihrer Herstellung und Verwendung, Veröffentlichungsschrift zum internationalen Patent WO2016/020519 A1
  • Wendler, M., Reichel, B., Eckner, R., Fabrichnaya, O., Krüger, L., Weiß, A., Mola, J.
    Effect of Vanadium Nitride Precipitation on Martensitic Transformation and Mechanical Properties of CrMnNi Cast Austenitic Steels, Met. Mat. Trans. A, 47 (2016), pp. 139-151, DOI: 10.1007/s11661-014-2716-0
  • Wendler, M., Hauser, M., Eckner, R., Weiß, A., Volkova, O., Mola, J.
    Design neuartiger ultrahochfester CrMnNi-C-N-Stahlgusslegierungen mit erhöhter Plastizität, Freiberger Forschungshefte, Metallurgisches Kolloquium zu Ehren von Prof. Dieter Janke, 67. Berg- und Hüttenmännischer Tag 2016, S. 17-25, Hrsg.: Olena Volkova, TU Bergakademie Freiberg, ISBN 978-3-86012-530-4
  • Wenzel, C., Aneziris, C. G., Pranke, K.
    Metal-Matrix Composites Prepared by Paper-Manufacturing Technology, Met. Mat. Trans. A, 47 (2016) pp. 160-169, DOI: 10.1007/s11661-015-2819-2

2015

  • Acker, R., Weider, M.
    Herstellung von Metal-Matrix-Composites im Vakuum-Druckinfiltrationsofen, Giesserei-Praxis, (2015) 3, S. 90-92
  • Ackermann, S., Lippmann, T., Henkel, S., Biermann. H.
    Biaxial fatigue behavior of a powder metallurgical TRIP steel, Frattura ed Integrità Strutturale, 34 (2015) pp. 580-589; DOI: 10.3221/IGF-ESIS.34.64
  • Aneziris, C. G., Dudczig. S., Weigelt, C.
    Verwendung eines duktilen Verbundwerkstoffes aus Metall und einer Titanverbindungen enthaltenden Keramik für Bauteile, die in direktem Kontakt mit Aluminiumschmelzen stehen, Empfangsbestätigung zur Patentanmeldung, AZ: DE 10 2014 019 422.1, 2015
  • Becker, H., Martin, S., Reichel, B., Decker, S., Krüger, L., Rafaja, D.
    Orientation dependence of the martensitic transformation in (Zr,Mg)O2 embedded in a TRIP steel matrix, International Conference on Martensitic Transformations, ICOMAT-2014, Mater. Today: Proc., 28 (2015), pp. S727-S730
  • Berek, H., Ballaschka, U., Aneziris, C. G., Losch, K., Schladitz, K.
    The correlation of local deformation and stress-assisted local phase transformations in MMC foams, Materials Characterization, 107 (2015), pp. 139-148, doi: 10.1016/j.matchar.2015.06.020
  • Biermann, H., Michel, P.
    SFB 799 – Die Hochzeit von Stahl und Keramik, 250 JAHRE TU Bergakademie Freiberg, 2015, S. 166-167
  • Burgold, A., Kuna, M.
    Beanspruchungsanalyse von Rissen in TRIP-Stählen und der Einfluss der Phasenumwandlung, DVM Bericht, 247 (2015), S. 209-218, ISSN 1616-4687
  • Burgold, A., Kuna, M., Prüger, S.
    Crack tip fields in ductile materials with martensitic phase transformation – A numerical 2D study, Engineering Fracture Mechanics, 138 (2015), pp. 169–184, http://dx.doi.org/10.1016/j.engfracmech.2015.03.002
  • Chaves, H., Kirmse, C., Heller, H.-P., Dubberstein, T.
    Vorrichtung und Verfahren zum Zerstäuben von Schmelzen, Patentanmeldung AZ 10 2015 107 876.7 DPMA (26.05.2015)
  • Decker, S., Lange, K., Krüger, L., Dubberstein, T.
    Influence of the Sulfur Content on the Sintering Behavior and the Mechanical Properties of a CrMnNi
    TWIPSteel, steel research int., 86 (2015) 5, pp. 544-549
  • Decker, S., Lange, K., Dubberstein, T., Krüger, L.
    Influence of the Sulfur Content on the Mechanical Properties of a TRIP/TWIP-Matrix Composite Reinforcedwith 10 vol% Mg-PSZ, Advanced Engineering Materials, 17 (2015) 9, pp. 1251-1356, DOI: 10.1002/adem.201400548
  • Droste, M., Biermann, H.
    Influence of Mg-PSZ particle size on the fatigue behaviour of a high alloy steel matrix composite, Materials Science Forum, 825-826 (2015), pp.
    176-181, DOI: 10.4028/www.scientific.net/MSF.85-826.176
  • Dubberstein, T., Heller, H.-P., Klostermann, J., Schwarze, R., Brillo, J.
    Surface tension and density data for Fe-Cr-Mo, Fe-Cr-Ni and Fe-Cr-Mn-Ni steels, Journal of Material Science, (2015) 50, pp. 7227–7237, DOI 10.1007/s10853-015-9277-5
  • Dubberstein, T., Heller, H. P.
    High temperature investigation of viscosity for FeCrMnNi as-cast steel, 6th Int. Symp. High-Temp. Metall. Process., Hrsg.: TMS (The Minerals, Metals &
    Materials Society), John Wiley & Sons, Inc., 2015, pp. 203-210
  • Eckner, R., Illgen, A., Radajewski, R., Krüger, L.
    Fracture mechanics characterization of sintered 30 vol.-% Al2O3/TRIP steel composites using SENB miniature samples, Materials Science Forum, 825-826 (2015), pp. 899-906
  • Ehinger, D., Krüger, L., Martin, U., Weigelt, C., Aneziris, C. G.
    Buckling and crush resistance of high-density TRIP-steel and TRIP-matrix composite honeycombs to out-of-plane compressive load, International Journal of Solids and Structures, 66 (2015), pp. 207–217
  • Ehinger, D., Krüger, L.
    Dynamische Werkstoffprüfung, in: Moderne Methoden der Werkstoffprüfung, pp. 181-215, Hrsg.: Biermann,H., Krüger, L., Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim, 2015, ISBN: 978-3-527-33413-1
  • Greifzu, F., Kratzsch, C., Forgber, T., Lindner, F., Schwarze, R.
    Assessment of Particle-Tracking Models for Disperse Particle-Laden Flows Implemented in OpenFOAM and ANSYS FLUENT, Engineering Applications of Computational Fluid Mechanics, 10 (2015) 1, pp. 30-43, doi: 10.1080/19942060.2015.1104266
  • Halbauer, L., Zenker, R., Weidner, A., Buchwalder, A., Biermann, H.
    Electron Beam Welding of Cold Rolled High-Alloy TRIP/TWIP Steel Sheets, steel research int., 86 (2015), doi: 10.1002/srin.201500086
  • Halbauer, L., Buchwalder, A., Zenker, R., Biermann, H.
    Influence of EB Parameters on the Microstructure and Mechanical Properties of Dissimilar Welded Joints in High Alloy TRIP/TWIP Steels, JOM 2015, Conference paper, pp. 1-7
  • Hauser, M., Wendler, M., Ghosh Chowdhury, S., Weiß, A., Mola, J.
    Quantification of deformation induced α’-martensite in Fe-19Cr-3Mn-4Ni-0·15C-0·15N austenitic steel by in situ magnetic measurements, Mat. Sci. & Tech., 31 (2015) 12, pp. 1473-1478, doi: 10.1179/1743284714Y. 0000000731
  • Hauser, M., Wendler, M., Weiß, A., Mola, J.
    Quantification of deformation-induced α’-martensite content in Fe-19Cr-3Mn-4Ni-0.15C-0.17N austenitic stainless steel by in-situ magnetic measurements, conference proceedings, 8th European stainless steel conference, Graz, 2015, pp. 51-58
  • Hauser, M., Wendler, M., Weiß, A., Mola, J.
    Modeling of deformation mechanisms in Fe-19Cr-3Mn-4Ni-0.15N-0.17C cast austenitic steel with TRIP/TWIP effects, conference proceedings, Asia steel international conference, 2015, Yokohama, pp. 100-101
  • Heinrich, M., Schwarze, R.
    Density-Based Solver for all Mach Number Flows, Progress in Computational Fluid Dynamics, accepted: 23.03.2015
  • Henkel, S., Kulawinski, D, Ackermann, S., Biermann, H.
    Mehrachsige Werkstoffeigenschaften, in: Moderne Methoden der Werkstoffprüfung, pp. 121-157, Hrsg.: Biermann,H., Krüger, L., Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim, 2015, ISBN: 978-3-527-33413-1
  • Hensl, T., Mühlich, U., Budnitzki, M., Kuna, M.
    An eigenstrain approach to predict phase transformation and self-accommodation in partially stabilized zirconia, Acta Materialia, 86 (2015), pp. 361–373, http://dx.doi.org/10.1016/j.actamat.2014.12.032
  • Kirmse, C., Chaves, H.
    Measurement of the Average Two-Dimensional Surface Temperature Distribution of Drops in a Melt Atomization Process, Journal of Thermal Spray Technology, 24 (2015) 4, pp. 690-695, DOI: 10.1007/s11666-015-0217-3
  • Krüger, L., Grützner, S., Decker, S., Schneider, I.
    Spark Plasma Sintering and Strength Behavior under Compressive Loading of Mg-PSZ/Al2O3-TRIP-Steel Composites, Materials Science Forum, 825-826 (2015), pp. 182-188, doi: 10.4028/www.scientific.net/MSF.825-826.182
  • Kulawinski, D., Ackermann, S., Seupel, A., Lippmann, A., Henkel, S., Kuna, M., Weidner, A., Biermann, H.
    Deformation and strain hardening behavior of powder metallurgical TRIP steel under quasi-static biaxial-planar loading, Materials Science and Engineering: A, 642 (2015), pp. 317-329, doi: 10.1016/j.msea.2015.06.083
  • Kuna, M., Burgold, A., Prüger, S.
    Stress analysis and configurational forces for cracksin TRIP-steels, International Journal of Fracture, 193 (2015), pp. 171–187, doi: 10.1007/s10704-015-0027-0
  • Mandel, M., Krüger, L., Decker, S.
    Electrochemical corrosion studies of spark plasma sintered zirconiaparticle-reinforced high-alloy steel at different temperatures, Corrosion Science 90 (2015), pp. 323–330, http://dx.doi.org/10.1016/j.corsci.2014.10.029
  • Mandel, M., Krüger, L., Decker, S.
    Electrochemical corrosion behaviour of zirconia particle-reinforced high alloyed steel, Materials and Corrosion, 2015, DOI: 10.1002/maco.201508249
  • Mandel, M., Krüger, L., Decker, S.
    Comparative corrosion studies of zirconia particle-reinforced high-alloy steel by potentiodynamic polarisation and one year outdoor exposure, Materialwiss. Werkstofftech., 46 (2015), pp. 1039-1045, DOI: 10.1002/mawe.201500388
  • Mandel, M., Krüger, L.
    Elektrochemische Korrosion, In: Moderne Methoden der Werkstoffprüfung, Hrsg.: Biermann H., Krüger L., WILEY-VCH, Weinheim, 2014, S. 387-412, ISBN: 978-3-527-33413-1
  • Martin, S., Wolf, S., Decker, S., Krüger, L., Martin, U.
    Deformation Bands in High-Alloy Austenitic 16Cr6Mn6Ni TRIP Steel: Phase Transformation and Its Consequences on Strain Hardening at Room Temperature, steel research int., 86 (2015), DOI: 10.1002/srin.201500005
  • Martin, S., Fabrichnaya, O., Rafaja, D.
    Prediction of the local deformation mechanisms in metastable austenitic steels from the local concentration of the mainalloying elements, Materials Letters, 159 (2015), pp. 484–488, DOI: 10.1016/j.matlet.2015.06.087
  • Martin, S., Wolf, S., Martin, U., Krüger, L., Rafaja, D.
    Deformation Mechanisms in Austenitic TRIP/TWIP Steel as a Function of Temperature, Metallurgical and Materials Transaction A, 2014, DOI: 10.1007/s11661-014-2684-4
  • Mola, J., Wendler, M., Weiß, A., Reichel, B., De Cooman, B. C. Segregation-Induced Enhancement of Low-Temperature Tensile Ductility in a Cast High-Nitrogen Austenitic Stainless Steel Exhibiting Deformation-Induced α´ Martensite Formation, Metallurgical and Materials Transactions A, 46A (2015), pp. 1450-1454, DOI: 10.1007/s11661-015-2782-y
  • Moritz, K., Aneziris, C.G., Wenzel, C., Gerlach, N.
    Druckschlickergießverfahren für deagglomerierte Schlicker auf der Basis keramischer, metallokeramischer oder metallischer Pulver mit Teilchengrößen im Bereich von 20 nm bis 50 µm, Patentschrift DE 10 2011 117 764 B4, 2015
  • Mühlich, U., Ballani, F., Stoyan, D.
    Influence of randomness intopology,geometry and material properties on the mechanical response of elastic central-force networks, Probabilistic Engineering Mechanics, 40(2015), pp. 36–41
  • Oppelt, M., Aneziris, C. G.
    Analysis and evaluation of different influencing factors in processing of hollow and full beads based on TRIP steel, Journal of Alloys and Compounds, 634 (2015), pp. 43-49, DOI: http://dx.doi.org/10.1016/j.jallcom.2015.01.264
  • Oppelt, M., Aneziris, C. G.
    Analysis and evaluation of different influencing factorsin processing of hollow and full beads by alginate gelationbased on zirconia and TRIP steel, Materials Science Forum, 825-826 (2015), pp. 158-166
  • Pavlyuchkov, D., Savinykh, G., Fabrichnaya, O.
    Experimental investigation and thermodynamic modeling of the ZrO2–MnOx system, Journal of the European Ceramic Society, 2015, doi: 10.1016/j.jeurceramsoc.2015.06.005
  • Pavlyuchkov, D., Martin, S., Reichel, B., Weigelt, C., Fabrichnaya, O.
    Thermal Stability of the Commercial Mg-PSZ Powders, Advanced Engineering Materials, 2015, DOI:10.1002/adem.201400521
  • Pranke, K., Wendler, M., Weidner, A., Guk, S., Weiß,A., Kawalla, R.
    Formability of strong metastable Fe-15Cr-3Mn-3Ni-0.2C-0.1N austenitic TRIP/(TWIP) steel - A comparison of different base materials, Journal of Alloys and Compounds, 648 (2015), pp. 783-793, DOI: 10.1016/j.jallcom.2015.06.205
  • Pranke, K., Schmidtchen, M., Guk, S., Kawalla, R.
    Walzkonzept für die Kalt- und Warmumformung neuer metastabiler Stähle auf der Flachbahn, Werkstoffwoche, Dresden (2015), pp. 1-29, in: Bauer, H. (Hrsg.): Walzen von Flachprodukten, Springer-Verlag, Berlin, 2016
  • Schwarze, R., Klostermann, J.
    Computational Fluid Dynamic (CFD) Simulations of Liquid Steel Infiltration in Porous Ceramic Structures: Dynamics of the Penetrating Melt Surface, steel research international, 86 (2015), doi: 10.1002/srin.201500095
  • Seupel, A., Kuna, M.
    Application of a Local Damage Model to Porous TRIP-Steel, Applied Mechanics and Materials, 784 (2015), pp. 484-491,
    doi: 10.4028/www.scientific.net/AMM.784.484
  • Seupel, A., Kuna, M.
    Erweiterung eines duktilen Schädigungsmodells zur Beschreibung von TRIP-Stählen, DVM Bericht, 247(2015), S. 83-92, ISSN 1616-4687
  • Weidner, A., Segel, C., Biermann, H.
    Magnitude of shear of deformation-induced
    α'-martensite in high-alloy metastable steel, Materials Letters 143(2015)155–158, http://dx.doi.org/10.1016/j.matlet.2014.12.098
  • Weidner, A., Fischer, K., Segel, C., Schreiber, G., Biermann, H.
    Texture evolution of cold rolled and reversion annealed metastable austenitic CrMnNi steels, Materials Science and Engineering 82 (2015) 012069, 17th International Conference on Textures of Materials (ICOTOM 17), IOP Publishing, doi:10.1088/1757-899X/82/1/012069
  • Weidner, A., Müller, A., Biermann, H.
    Portevin Le Chatelier effect in a metastable austenitic CrMnNi steel, ICOMAT, Materials Today: Proceedings, 2S3, 2015, doi:10.1016/j.matpr.2015.07.361, pp. 623-626
  • Weidner, A., Biermann, H.
    Combination of Different In Situ Characterization Techniques and Scanning Electron Microscopy Investigations for a Comprehensive Description of the Tensile Deformation Behavior of a CrMnNi TRIP/TWIP Steel, JOM, 67 (2015) 8, pp. 1729-1747, DOI: 10.1007/s11837-015-1456-y
  • Weidner, A., Biermann, H.
    Moderne Methoden der Rasterelektronenmikroskopie, in: Moderne Methoden der Werkstoffprüfung, pp. 217-254, Hrsg.: Biermann,H., Krüger, L., Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim, 2014, ISBN: 978-3-527-33413-1
  • Weigelt, C., Aneziris, C. G., Ehinger, D., Eckner, R., Krüger, L., Ullrich, C., Rafaja, D.
    Effect of zirconia and aluminium titanate on the mechanical properties of transformation-induced plasticity-matrixcomposite materials, Journal of Composite Materials, DOI: 10.1177/0021998314567698
  • Weigelt, C., Jahn, E., Berek, H., Aneziris, C. G., Eckner, R., Krüger, L.
    Joining of Zirconia Reinforced Metal–Matrix Composites by a Ceramics-Derived Technology, Advanced Engineering Materials, 2015, DOI: 10.1002/adem.201400559
  • Weigelt, C., Berek, H., Aneziris, C. G., Eckner, R., Krüger, L.
    Joining of Zirconia Reinforced Metal-Matrix Composites, Materials Science Forum, 825-826 (2015), pp. 498-505, DOI: 10.4028/www.scientific.net/MSF.825-826.498
  • Weigelt, C., Aneziris, C. G.
    Verbundwerkstoffe aus Stahl und Keramik – Hochbelastbare Materialien mit Leichtbaupotential, Keramische Zeitschrift, (2015) 4, S. 216-218
  • Weigelt, C., Berek, H., Aneziris, C. G., Wolf, S., Eckner, R., Krüger, L.
    Effect of minor titanium additions on the phase composition of TRIP steel/magnesia partially stabilised zirconia composite materials; Ceramics International, 41 (2015), pp. 2328–2335, doi: 10.1016/j.ceramint.2014.10.040
  • Weiß, A.
    Verfahren zur Herstellung eines hochfesten bzw. höchstfesten Formteiles aus härtbarem Stahl, WO 2015/032907 A1, Offenlegungsschrift, 2015, Weltorganisation für geistiges Eigentum (WIPO)
  • Weiß, A.
    Verfahren zur Herstellung dünnwandiger Stahlgussteile aus hoch legierten Stählen mit TRIP/TWIP-Eigenschaften, Deutsche Patentanmeldung Nr. 10 2015 210 313.7, 2015
  • Weiß, A., Schröder, Ch., Schubert, V., Bönkendorf, M., Giesel, S.
    Nichtrostender austenitischer Stahl, daraus hergestelltes Feinblech und dessen Verwendung, Patentanmeldung 1020155005742.1, Schreiben mit Kennzeichen: P99340MAMRsli
  • Weiß, A., Sandig, F.
    Hochfeste Formteile aus härtbarem Stahl, Konstruktion, (2015) 7/8, S. IW 14- IW 15
  • Wendler, M., Weiß, A.
    Neue Generation von ultrahochfesten Stählen, Konstruktion, 1/2 (2015), S. IW4-IW5
  • Wendler, M., Hauser, M., Fabrichnaya, O., Krüger, L., Weiß, A., Mola, J.
    Thermal and deformation-induced phase transformation behavior of Fe-15Cr-3Mn-3Ni-0.1N-(0.05-0.25)C austenitic and austenitic-martensitic cast stainless steels, Materials Science & Engineering A, DOI: 10.1016/j.msea.2015.07.084

2014

  • Acker, R., Weider, M., Dommaschk, C.
    MMC-Infiltration of high alloyed CrMnNi-TRIP steels in new developed vacuum-pressure furnace, Conference Proceedings, HNS 2014, 12th International Conference, Hamburg, 2014, pp. 130-133, Hrsg.: Energietechnik Essen GmbH

  • Ackermann, S., Kulawinski, D., Henkel, S., Biermann, H.
    Biaxial in-phase and out-of-phase cyclic deformation and fatigue behavior of an austenitic TRIP steel, Int. J. Fatigue, (2014), http://dx.doi.org/10.1016/j.ijfatigue.2014.02.007, article in press
  • Aneziris, C. G., Weigelt, C., Biermann, H.
    TRIP-Matrix-Verbundwerkstoffe mittels der bildsamen Formgebung, in: Neue Horizonte in der Pulvermetallurgie - Werkstoffe, Produkte und Verfahren, Pulvermetallurgie in Wissenschaft und Praxis,Band 30, pp. 131-147, Tagungsband Hagener Symposiums 27./28. November 2014, Hagen, Heimdall Verlag, ISBN 978-3-939935-85-8, Hrsg. H. Danninger, H. Kestler; H. Kolaska
  • Berek, H., Hubalkova, J., C. G. Aneziris
    Röntgen-Tomografie, in: Moderne Methoden der Werkstoffprüfung, pp. 353-385, Hrsg.: Biermann,H., Krüger, L., Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim, 2014, ISBN: 978-3-527-33413-1
  • Burgold, A., Kuna, M., Prüger, S.
    Material forces in consideration of phase transformation in TRIP-steel, Procedia Materials Science, 3 (2014), pp. 461 – 466, doi: 10.1016/j.mspro.2014.06.077
  • Dubberstein, T., Heller, H.-P.
    Determination of Surface Tension for FeCrMnNi Alloy with Varying Sulfur and Phosphorous Relevant to Gas Atomization, in: 5th Int. Symp. High-Temp. Metall. Process., John Wiley & Sons, Inc., 2014, pp. 161–168, http://dx.doi.org/10.1002/9781118887998.ch21, ISBN: 9781118887998
  • Dubberstein, T., Heller, H.-P.
    Vacuum Inert Gas Atomisation of Cr-Mn-Ni austenitic steel alloys, Advanced Materials Research, Vols. 875-877 (2014), pp. 1265-1269, doi: 10.4028/www.scientific.net/AMR.875-877.1265
  • Dubberstein, T., Jahn, A., Lange, M., Heller, H.-P., Scheller, P. R.
    Interfacial Reaction between Iron‐Based Alloys and Polycrystalline α‐Al2O3, steel research int., 85 (2014) 9999, pp. 1-9, doi: 10.1002/srin.201300445
  • Fabrichnaya, O., Pavlyuchkov D.
    Numerical data and functional relationships in science and technology. Ed. In Chief W. Martienssen. Group IV Physical Chemistry 19. Thermodynamic properties of inorganic materials compiled by SGTE, subvolume C. Ternary steel systems phase diagrams and phase transition data. Part 2 Ternary systems from Cr-Mn-N to Ni-Si-Ti, Landolt-Börnstein, 2014
  • Geissler, D., Freudenberger, J., Kauffmann, A., Martin, S., Rafaja, D.
    Assessment of the thermodynamic dimension of the stacking fault energy, Philosophical Magazine, 94 (2014)26, pp. 2967–2979, http://dx.doi.org/10.1080/14786435.2014.944606
  • Glage, A., Weigelt, C., Räthel, J., Biermann, H.,
    Fatigue behaviour of hot pressed austenitic TWIP steel and TWIPsteel/Mg-PSZ composite materials, International Journal of Fatigue, 65 (2014), pp. 9-14, doi: http://dx.doi.org/10.1016/j.ijfatigue.2013.11.025
  • Glage, A.
    Zyklisches Verformungsverhalten von partikelverstärktenVerbundwerkstoffen mit metastabiler austenitischer Matrix, Dissertation, 2014
  • Guk, S., Pranke, K., Müller, W., Yanina, A.
    Development of High-Strength TRIP-Matrix-Composite Materials, MEFORM 2014, Conference Proceedings, Altenberg, Herausg.: ACATRAIN e.V., Verein für Weiterbildung an der TU Bergakademie Freiberg, Institut für Metallformung
  • Guk, S., Yanina, A., Kawalla, R., Berek, H., Räthel, J.
    Densification and properties of an Mg-PSZ reinforced TRIP-Matrix-Composite produced by hot pressing: Comparison with other powder metallurgy techniques, OMD-2014, International Science & Technology Congress, pp.364-369, Hrsg.: MISIS, Moskau, ISBN: 978-5-905714-27-6
  • Guk, S., Müller, W., Pranke, K., Kawalla, R.
    Mechanical Behaviour Modelling of an Mg-Stabilized Zirconia Reinforced TRIP-Matrix-Composite under Cold Working Conditions. Materials Sciences and Applications, (2014) 5, pp. 812-822, http://dx.doi.org/10.4236/msa.2014.511081
  • Guk, S., Pranke, K., Müller, W.
    Flow Curve Modelling of an Mg-PSZ Reinforced TRIP-matrix-composite, ISIJ International, 54 (2014) 10, pp. 2416–2420
  • Hauser, M., Weiss, A., and Mola, J.
    Thermodynamic-Mechanical Modeling of Martensite Formation in Fe-19Cr-3Mn-4Ni-0.15N-0.2C Austenitic Cast Steel, Conference Proceedings, 2nd International Conference High Manganese Steel HMnS 2014, Aachen, pp. 117-120
  • Jahn, A., Steinhoff, K.-P., Dubberstein, T., Franke, P., Weider, M., Wolf, S., Kovalev, A., Glage, A., Weiß, A., Schärfl, W., Eigenfeld, K., Krüger, L., Scheller, P. R.
    Phosphor Alloyed Cr–Mn–Ni Austenitic As‐cast Stainless Steel with TRIP/TWIP Effect, steel research int., 85 (2014) 3, pp. 477-485, DOI: 10.1002/srin.201300114
  • Linderov, M.,  Segel, C., Weidner, A., Biermann, H., Vinogradov, A.
    Deformation mechanisms in austenitic TRIP/TWIP steels at room and elevated temperature investigated by acoustic emission and scanning electron microscopy, Materials Science & Engineering A, 597 (2014), pp. 183-193, doi: http://dx.doi.org/10.1016/j.msea.2013.12.09
  • Losch,K., Schladitz, K., Ballaschk, U., Berek, H., Aneziris, C. G.
    Interrupted in-situ compressive experiments on MMC foams in an XCT: Experiments and estimation of displacement fields, Image Analysis & Stereology, 2014, accepted
  • Martin, S., Wolf, S., Martin, U., Krüger, L., Rafaja, D.
    Develeopment of deformation bands in highly alloyed austenitic CrMnNi TRIP steel: phase transformation and consequences an strain hardening, Tagungsband, HMnS 2014, Aachen, pp. 423-426, Hrsg.: IEHK Steel Institute, RWTH Aachen University and Max-Planck-Institut für Eisenforschung (MPIE), Wolfgang Bleck, Dierk Raabe, Verlag: RWTH Aachen
  • Oppelt, M., Wenzel, C., Aneziris, C. G., Berek, H.
    Processing and Characterization of MMC Beads Based on Zirconia and TRIP Steel, Metallurgical an Materials Transactions B, 2014, doi: 10.1007/s11663-014-0151-7
  • Ostmann, S., Chaves, H., Brücker, C.
    3D path tracking of particles in a swirling flow using a light-field camera, 17th International Symposium on Applications of Laser Techniques to Fluid Mechanics, 07-10 July, 2014, Lisbon, Portugal
  • Pavlyuchkov, D., Savinykh, G., Fabrichnaya, O.
    Experimental investigation and thermodynamic modeling of the ZrO2–MgO–Al2O3 system, Journal of the European Ceramic Society, 34 (2014), pp. 1397–1408
  • Prüger, S., Seupel, A., Kuna, M.
    A thermomechanically coupled material model for TRIP steel, International Journal of Plasticity,  55 (2014), pp. 182-197, doi: http://dx.doi.org/10.1016/j.ijplas.2013.10.005
  • Rafaja, D. , Krbetschek, C. , Ullrich, C., Martin, S.,
    Stacking fault energy in austenitic steels determined by using in situ X-ray diffraction during bending, J. Appl. Cryst. (2014) 47, pp. 936–947, doi:10.1107/S1600576714007109
  • Reichel, B., Böhme, S., Eckner, R., Wendler, M., Krüger, L., Rafaja, D.
    Microstructure development during the deformation of precipitation strengthened metastable austenitic steels, Conference Proceedings, 2nd Int.
    Conf. on High Mangenese Steel 2014, Aachen, pp. 463-466, Hrsg.: IEHK Steel Institute, RWTH Aachen University and Max-Planck-Institut für Eisenforschung (MPIE), Wolfgang Bleck, Dierk Raabe, Verlag: RWTH Aachen
  • Ullrich, C., Eckner, R., Krüger, L., Rafaja, D.
    Relationship between the deformation mechanism and the hardening behavior of the TRIP/TWIP-16-7-9 CrMnNi steel, 2nd International Conference on High Manganese Steel (HMnS2014), proceedings, pp. 431-434, Aachen,
    Hrsg.: IEHK Steel Institute, RWTH Aachen University and Max-Planck-Institut für Eisenforschung (MPIE), Wolfgang Bleck, Dierk Raabe, Verlag: RWTH Aachen
  • Weidner, A., Vinogradov, A., Lazarev, A., Biermann, H.
    Kinetics of deformation processes in a high-alloy cast TWIP steeldetermined by acoustic emission and scanning electron microscopy, Key Engineering Materials, 592-593, (2014), pp. 489-492, doi:10.4028/www.scientific.net/KEM.592-593.489
  • Weidner, A., Hangen, U., Biermann H.
    Nanoindentation measurements on deformation-induced α’-martensite in a metastable austenitic high-alloy CrMnNi steel, Philosophical Magazine Letters, 94 (2014) 8, pp. 522-530, http://dx.doi.org/10.1080/09500839.2014.941027
  • Weidner, A., Biermann H.
    Case studies on the application of high-resolution electronchannelling contrast imaging – investigation of defects and defectarrangements in metallic materials, Philosophical Magazine, 95 (2015) 7, pp. 759-793, DOI: 10.1080/14786435.2015.1006296
  • Weidner, A., Biermann, H.
    Moderne Methoden der Rasterelektronenmikroskopie, in: Moderne Methoden der Werkstoffprüfung, pp. 217-254, Hrsg.: Biermann,H., Krüger, L., Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim, 2014, ISBN: 978-3-527-33413-1
  • Weise, J., Baumeister, J., Ehinger, D., Krüger, L., Martin, U., Pacheco, J. B. jun.
    Investigation of Processing, Microstructure and Mechanical Behaviour of 304L TRIP Steel Foams Produced by Injection Moulding, Procedia Materials Science, 4 (2014), pp. 63-67, doi: 10.1016/j.mspro.2014.07.596
  • Weiß, A., Wendler, M.
    Hochfeste und gleichzeitig zähe Halbzeuge und Leichtbauteile aus hochfestem Stahl zur Herstellung und Verwendung, Empfangsbestätigung zur Patentanmeldung, AZ: 10 2014 011 759.6 v. 13.08.2014
  • Wendler, M., Mola, J., Reichel, B., Krüger, L., Weiß, A.
    Temperature dependence of properties in an Fe-19Cr-4Ni-3Mn-0,15Ni-0,2C-austenitic cast steel, Proceedings, 2nd Int.
    Conf. on High Mangenese Steel 2014, pp. 407-410, Hrsg.: IEHK Steel Institute, RWTH Aachen University and Max-Planck-Institut für Eisenforschung (MPIE), Wolfgang Bleck, Dierk Raabe, Verlag: RWTH Aachen
  • Wendler, M., Reichel, B., Weiß, A., Krüger, L., Mola, J.
    Influene of Carbon on the microstructure and mechanical properties of cast austenitic Fe-19Cr-4Ni-3Mn-0,15N steels, Conference Proceedings, HNS 2014, 12th International Conference, Hamburg, 2014, pp. 154-161, Hrsg.: Energietechnik Essen GmbH
  • Wendler, M., Reichel, B., Eckner, R., Fabrichnaya, O., Krüger, L., Weiß, A., Mola, J.
    Effect of Vanadium Nitride Precipitation on Martensitic Transformation and Mechanical Properties of CrMnNi Cast Austenitic Steels, Metallurgical and Materials Transactions A, 2014, ISSN: 1073-5623, DOI: 10.1007/s11661-014-2716-0
  • Wolf, S., Martin, S.,Krüger, L., Martin, U.
    Constitutive modelling of the rate dependent flow stress of cast high-alloyed metastable austenitic TRIP/TWIP steel, Materials Science & Engineering A, 594 (2014), pp. 72–81

2013

  • Ackermann, S., Kulawinski, D., Henkel, S. und Biermann, H. 
    Low cycle fatigue of an austenitic TRIP steel under various biaxial-planar stress states, In: Konferenz-CD zur ICMFF10, 2013
  • Ballaschk, U.; Berek, H.; Ehinger, D.; Aneziris, C. G.; Krüger, L.
    Mg-PSZ Reinforced TRIP-Steel MMCs – In Situ CT Investigations of Cruciform Samples under Compressive Loading, ADVANCED ENGINEERING MATERIALS, 15 (2013) 7, pp. 590-599.
  • Borisova, D.; Klemm, V.; Martin, S.; Wolf, S.; Rafaja, D. 
    Microstructure Defects Contributing to the Energy Absorption in CrMnNi TRIP Steels, ADVANCED ENGINEERING MATERIALS, 15 (2013) 7, pp. 571-582.
  • Buchwalder, A.; Rüthrich, K.; Zenker, R.; Biermann, H.  
    Electron Beam Welding of High Alloy CrMnNi Cast Steelswith TRIP/TWIP Effect, ADVANCED ENGINEERING MATERIALS, 15 (2013) 7, pp. 566-570
  • Decker, S., Krüger, L., Schneider, I.
    Influence of steel and Mg-PSZ additions on the compressive deformation behavior of an Al2O3 reinforced TRIP/TWIP-matrix-composite, Tagungsband Euro PM, International Powder Metallurgy Congress and Exhibition, (2013), pp. 113-118, ISBN: 978-1-899072-43-9
  • Dubberstein, T.; Heller, H.-P.
    The Thermophysical Properties of Liquid TRIP/TWIP-Steel Alloys Using the Maximum Bubble Pressure Method, ADVANCED ENGINEERING MATERIALS, 15 (2013) 7, pp. 583-589.
  • Dubberstein, T.; Heller, H.-P.  
    Effect of Surface Tension on Gas Atomization of a CrMnNi Steel Alloy, Steel Res. Int., 84 (2013) 9, pp. 845-851, DOI: 10.1002/srin.201200321
  • Chaves, H.
    A New Method for the Highly Reproducible on Demand Production of Single Droplets, ILASS – Europe 2013, 25th European Conference on Liquid Atomization and Spray Systems, Chania, Greece, 1-4 September 2013
  • Ehinger, D.; Krüger, L.; Martin, U.; Weigelt, C.; Aneziris, C.G.
    Temperature Effects on the Deformation Behavior of High-Density TRIP Steel and Particle-Reinforced TRIP Steel/Zirconia Honeycombs Under Quasi-Static Compressive Loading, ADVANCED ENGINEERING MATERIALS 15 (2013) 7, pp.646-657.
  • Gerlach, N. Wenzel, C., Aneziris, C. G.
    Verwendung eines Gemisches aus Konjakmehl und Welan Gum als Binder für die keramische und pulvermetallurgische Formgebung, Patentschrift DE 10 2012 017 822, 2012
  • Glage, A.; Biermann, H.
    Ermüdungsverhalten von Mg-PSZ partikelverstärkten TRIP/TWIP-Stahl-Matrix-Verbundwerkstoffen, Tagungsband, 19. Symposium Verbundwerkstoffe und Werkstoffverbunde, 2013, S. 197-206, Hrsg.: A. Wanner, K. A. Weidenmann, Karlsruhe, ISBN: 978-3-00-042309-3
  • Glage, A.; Weigelt, C.; Räthel, J.; Biermann, H. 
    Influence of Matrix Strength and Volume Fraction of Mg-PSZ on the Cyclic Deformation Behavior of Hot Pressed TRIP/TWIP-Matrix Composite Materials, ADVANCED ENGINEERING MATERIALS, 15 (2013) 7, pp. 550-557
  • Glage, A., Maurer, M., Weigelt, C., Räthel, J., Biermann, H.
    INFLUENCE OF MG-PSZ PARTICLE SIZE ON THE LOW CYCLE FATIGUEBEHAVIOUR OF STEEL MATRIX COMPOSITES, Seventh International Conference on Low Cycle Fatigue, Aachen, 2013,pp. 345-350, Deutscher Verband für Materialforschung und -prüfung e. V., Berlin, ISBN: 978-3-9814516-2-7
  • Jahn, A.; Steinhoff, K.‐Ph.; Dubberstein, T.; Franke, P.; Weider, M.; Wolf, S.; Kovalev, A.; Glage, A.; Weiß, A.; Schärfl, W.; Eigenfeld, K.; Krüger, L.; Scheller, P. R.
    Phosphor Alloyed Cr–Mn–Ni Austenitic As‐cast Stainless Steel with TRIP/TWIP Effect, steel research int., 84 (2013), DOI: 10.1002/srin.201300114.
  • Klostermann, J., Schwarze, R., Brücker, Ch.
    Meshing of Porous Foam Structures on the Micro-Scale, Eng. Comp., 29 (2013) 1, pp. 95-101, DOI: 10.1007/s00366-011-0247-5.
  • Klostermann, J., Schaake, K., Schwarze, R.
    Numerical simulation of a single rising bubble by VOF with surface compression, Int. J. Numer. Meth. Fluids, 71 (2013), pp. 960-982, DOI: 10.1002/fld.3692
  • Kovalev, A.; Wendler, M.; Jahn, A.; Weiß, A.; Biermann, H.
    Thermodynamic-Mechanical Modeling of Strain-Induced α'-Martensite Formation in Austenitic Cr–Mn–Ni As-Cast Steel, ADVANCED ENGINEERING MATERIALS 15 (2013) 7, pp. 609-617
  • Linderov, M., Segel, C., Vinogradov, A., Weidner, A., Biermann, H.
    Effect of temperature on microstracture evolution in TRIP/TWIP-steels during tensile deformation, Conference proceedings, pp. 665-672, The 12th International Conference of the Slovenian Society of non-destructive testing in engineering, 2013, Slovenian Society of non-destructive testing, Ljubljana, ISBN: 978-961-93537-0-7
  • Martin, S.; Decker, S.; Krüger, L.; Martin, U.; Rafaja, D. 
    Microstructure Changes in TRIP Steel/Mg-PSZ Composites Induced by Low Compressive Deformation, ADVANCED ENGINEERING MATERIALS, 15 (2013) 7, pp. 600-608.
  • Martin, S.; Rafaja, D.
    Mikrostrukturentwicklung in 5 Vol.-% Mg-PSZ verstärkten TRIP-Matrix-Compositen als Funktion der Verformungstemperatur, Tagungsband, 19. Symposium Verbundwerkstoffe und Werkstoffverbunde, 2013, S. 240-249, Hrsg.: A. Wanner, K. A. Weidenmann, Karlsruhe, ISBN: 978-3-00-042309-3
  • S. Martin,S. Richter, A. Poklad, H. Berek, S. Decker, U. Martin, L. Krüger, D. Rafaja
    Orientation relationships between phases arising during compression testing in ZrO2–TRIP-steel composites, Journal of Alloys and Compounds, 577S (2013) pp. 578-582, 10.1016/j.jallcom.2012.02.014
  • Mehlhorn, L.; Mühlich, U.; Kuna, M.
    A Material Model of Particle Size Dependent Transformation Plasticity of PSZ Ceramics under Thermomechanical Loading, ADVANCED ENGINEERING MATERIALS 15 (2013) 7, pp. 638-654.
  • Michel, P.; Jahn, A.; Weigelt, C.; Martin, S.   
    In Kombination mit Keramik gewinnt Stahl an Belastbarkeit, MM MaschinenMarkt, 14 (2013), S. 45-47.
  • Michel, P.; Wolf, S.; Ehinger, D.; Glage, A.      
    Keramikstrukturen in Stahlmatrix inspirieren den Leichtbau, MM MaschinenMarkt, 17 (2013), S. 58-61.
  • Pavlyuchkov, D.; Savinykh, G.; Fabrichnaya, O.
    Experimental Investigation and Thermodynamic Modelingof the ZrO2–MgO System, ADVANCED ENGINEERING MATERIALS, 15 (2013) 7, pp. 618-626.
  • Poklad, A.; Motylenko, M.; Klemm, V.; Schreiber, G.; Martin, S.; Decker, S.; Abendroth, B.; Haverkamp, M.; Rafaja, D.
    Interface Phenomena Responsible for Bonding between TRIP Steel and Partially Stabilised Zirconia as Revealed by TEM, ADVANCED ENGINEERING MATERIALS, 15 (2013) 7, pp. 627-637.
  • Prüger, S.; Mehlhorn, L.; Mühlich, U.; Kuna, M. 
    Study of Reinforcing Mechanisms in TRIP Matrix Composites under Compressive Loading by Means of Micromechanical Simulations, ADVANCED ENGINEERING MATERIALS 15 (2013) 7, pp. 542-549, DOI: 201200323.
  • Rafaja, D.; Krbetschek, Ch.; Borisova, D.; Schreiber, G.; Klemm, V.
    In situ X-ray diffraction study of stacking fault formation in the near-surface region of transformation induced plasticity steels, Thin Solid Films, 530 (2013), pp. 105–112
  • Segel, C.; Weidner, A.; Biermann, H.
    In situ Mikrostrukturuntersuchung eines TRIP-Matrix-Verbundwerkstoffes im Rasterelektronenmikros-kop, Tagungsband, 19. Symposium Verbund-werkstoffe und Werkstoffverbunde, 2013, S. 197-206, Hrsg.: A. Wanner, K. A. Weidenmann, Karlsruhe, ISBN: 978-3-00-042309-3
  • Tranta. F., Weiß, A.,
    The effect of heat tretatment and deformation on the martensitic transformation of FeMn(Cr) steels, Materials Science Forum, (2013) 729, pp. 132-137
  • Vinogradov, H.; Lazarev, A.; Linderov, M.; Weidner, A.; Biermann, H.
    Kinetics of deformation processes in high-alloyed cast transformation-induced plasticity/twinning-induced plasticity steels determined by acoustic emission and scanning electron microscopy: Influence of austenite stability on deformation mechanisms, Acta Materialia 61(2013), pp. 2434–2449, http://dx.doi.org/10.1016/j.actamat.2013.01.016.
  • Weidner, A.; Berek, H.; Segel, C.; Aneziris, C. G.; Biermann, H.
    In situ tensile deformation of TRIP steel / Mg-PSZ composites, Materials Science Forum, 738-739 (2013), pp. 77-81
  • Weidner, A.; Müller, A.; Weiss, A.; Biermann, H.
    Ultrafine grained high-alloyed austenitic TRIP steel, Materials Science & Engineering A, 571 (2013), pp.68-76,  http://dx.doi.org/10.1016/j.msea.2013.02.008
  • Weiß, A.         
    VERFAHREN ZUR HERSTELLUNG HOCHFESTER FORMTEILE AUS HOCHKOHLENSTOFF- UND HOCHMANGANHALTIGEM AUSTENITISCHEM STAHLGUSS MIT TRIP/TWIP-EIGENSCHAFTEN, Empfangsbescheinigung - Anmeldenummer PCT/EP2013/053312, 20. Februar 2013, Europäisches Patentamt.
  • Weiß, A.
    Verfahren zur Herstellung hochfester Formteile aus Stahlguss und TRIP-Effekt mit austenitisch-martensitischem Gefüge, Patentschrift zum Patent DE 10 2012 003 791.0, Deutsches Patent- und Markenamt, München, 2013.
  • Weiß, A.
    Verfahren zur Herstellung eines hochfesten bzw. höchstfesten Formteils aus härtbarem Stahl, Offenlegungsschrift DE 10 2013 014 814 A1 2015.03.05, Deutsches Patent und Markenamt, München
  • Weiß, A.; Wendler, M.        
    Verfahren zur Herstellung hochfester Formteile aus hochkohlenstoff- und hochmanganhaltigem austenitischem Stahlguss mit TRIP-/TWIP-Eigenschaften, Patentanmeldung WO 2013/124283 A1, Weltorganisation für geistiges Eigentum, 2013.
  • Weiß, A.; Wendler, M.; Gutte, H.; Biermann, H.
    High-strength cold-formable austenitic cast steel with TRIP/TWIP properties, International Foundry Research, 65 (2013) 4, pp. 2-9
  • Weiß, A., Wendler, M., Gutte, H., Biermann, H.,
    Hochfester und kalt umformbarer austenitischer Stahlguss mit TRIP/TWIP-Eigenschaften, Giesserei, 4 (2013), S. 54-65
  • Weiß, A.
    Method for producing high-strenght components from cast steel having TRIP/TWIP properties and use of the manufactured components, patent specification, WO 2013/064698 A3, 10.05.2013
  • Wendler, M.; Weiß, A.; Krüger, L.; Mola, J.; Franke, A.; Kovalev, A.; Wolf, S.
    Effect of Manganese on Microstructure and Mechanical Properties of Cast High Alloyed CrMnNi-N Steels, ADVANCED ENGINEERING MATERIALS 15 (2013) 7, pp. 558-565, DOI: 10.1002/adem.201200318.
  • Wendler, M., Mola, J., Krüger, L., Weiß, A.
    Experimental Quantification of the Austenite
    Stabilizing Effect of Mn in CrMnNi AsCast Stainless Steels, steel research int., 85 (2013) 5, pp. 803-810, DOI: 10.1002/srin.201300271

2012

  • Ackermann, S.; Kulawinski, D.; Henkel, S.; Biermann, H.
    Low cycle Fatigue behavior of a high alloyed TRIP-steel under in-phase and out-of-phase biaxial-planar loading, International Colloquium Mechanical Fatigue of Metal, 2012, Brno, Czech Republic, Conference proceedings, pp.135-142.
  • Ackermann, S.; Kulawinski, D.; Henkel, S.; Biermann, H.
    Charakterisierung eines austenitischen TRIP-Stahls unter biaxial-planarer LCF-Beanspruchung, Fortschritte in der Werkstoffprüfung für Forschung und Praxis, Tagung „Werkstoffprüfung“, 2012, Bad Neuenahr, S. 225-230, Hrsg.: Michael Borsutzki, Günther Moninger, Verlag Stahleisen GmbH, Düsseldorf, ISBN: 978-3-514-00794-9
  • Berek, H., Ballaschk, U., Aneziris, C. G., Hahn, S.
    Investigation of phase transformations in TRIP-steel/Mg-PSZ MMC honeycomb structures under compressive load by in situ X-ray computed tomography (XCT) and electron back scatter diffraction (EBSD), CELLMAT 2012, CD.
  • Biermann, H.; Bleck, W.
    Editorial. steel research int. 83 (2012) No. 6, S. 511, DOI: 10.1002/srin.201200064.
  • Biermann, H.; Solarek, J.; Weidner, A.
    SEM Investigation of High-Alloyed Austenitic Stainless Cast Steels With Varying Austenite Stability at Room Temperature and 100°C. steel research int. 83 (2012) No. 6, S. 512-520, DOI: 10.1002/srin.201100293.
  • Buchwalder, A., Rüthrich, K., Zenker, R., Biermann, H.
    Elektronenstrahlschweißen von TRIP/TWIP-Stahlgusswerkstoffen, in: Schriftenreihe Werkstoffe und werkstofftechnische Anwendungen, Band 47, S. 377-382, Hrsg.: B. Wielage, Chemnitz, 2012, ISBN 978-3-00-039358-7.
  • Decker, S.; Krüger, L.; Richter, S.; Martin, S.; Martin, U.
    Strain-Rate-Dependent Flow Stress and Failure of an Mg-PSZ Reinforced TRIP Matrix Composite Produced by Spark Plasma Sintering. steel research int. 83 (2012) No. 6, S. 521-528, DOI: 10.1002/srin.201100313.
  • Dubberstein,T., Heller, H. P., Scheller, P. R.
    Determination of thermophysical properties for molten slags by maximum bubble pressure method, Molten 2012, IX International Conference on Molten Slags, Fluxes and Salts, Proceedings, Beijing, CN, May 27-30, 2012.
  • Ehinger, D.; Krüger, L.; Martin, U.; Weigelt, C.; Aneziris, C. G.
    Deformation Mechanisms and Martensitic Phase Transformation in TRIP-Steel/Zirconia Honeycombs. steel research int. 83 (2012), No. 6, S. 565-575, DOI: 10.1002/srin.201100302.
  • Ehinger, D., Krüger, L., Martin, U., Weigelt, C., Aneziris, C. G.
    Crush and bending resistance of square-celled TRIP-steel/zirconia honeycomb structures at different loading rates, CELLMAT 2012, CD.
  • Ehinger, D., Krüger, L., Krause, S., Martin, U., Weigelt, C., Aneziris, C. G.
    Dynamic impact response of high-density square honeycombs made of TRIP steel and TRIP matrix composite material, DYMAT 2012, EPJ Web of Conferences 26, 01056 (2012), published by EDP Sciences, DOI: 10.1051/epjconf/20122601056.
  • Glage, A.; Martin, S.; Decker, S.; Weigelt, C.; Junghanns, M.; Aneziris, C. G.; Martin, U.; Krüger, L.; Biermann, H.
    Cyclic Deformation of Powder Metallurgy Stainless Steel/Mg-PSZ Composite Materials. steel research int. 83 (2012), No. 6, S. 554-564, DOI: 10.1002/srin.201100288.
  • Glage, A., Weigelt, C., Räthel, J., Biermann, H.
    Low cycle fatique behaviour of hot pressed austenitic steel/Mg-PSZ composite materials, XVI International Colloquium Mechanical Fatigue of Metals, 2012, pp. 119-126, Brno/Czech Republic.
  • Geigenmüller, A., Biermann, H.
    Material- und Energieeffizienz durch innovative Verbundwerkstoffe aus Stahl und Keramik, Ingenieurwissenschaften im Fokus-Werkstofftechnologien, Jahresmagazin 2012, S. 32-35, ALPHA Informationsgesellschaft mbH, Lampertheim, ISSN-Nr. 1618-8357.
  • Geigenmüller, A., Biermann, H., Stelter, M.
    Werkstoffe und Technologien für das Energiezeitalter - Studienangebote der TU Bergakademie Freiberg, Ingenieurwissenschaften im Fokus Werkstofftechnologien, Jahresmagazin 2012, S. 38-41, ALPHA Informationsgesellschaft mbH, Lampertheim, ISSN-Nr. 1618-8357.
  • Klostermann, J., Schwarze, R., Brücker, Ch.
    Meshing of Porous Foam Structures on the Micro-Scale, Eng. Comp., (2012), DOI: 10.1007/s00366-011-0247-5.
  • Klostermann, J., Schaake, K., Schwarze, R.
    Numerical simulation of a single rising bubble by VOF with surface compression, Int. J. Numer. Meth. Fluids 2012; 00:1–29, Published online in Wiley InterScience (www.interscience.wiley.com). DOI: 10.1002/fld.
  • Kovalev, A.; Jahn, A.; Weiß, A.; Wolf, S.; Scheller, P. R.
    STT and DTT Diagrams of Austenitic Cr–Mn–Ni As-Cast Steels and Crucial Thermodynamic Aspects of γ → α′ Transformation. steel research int. 83 (2012), No. 6, S. 576-583, DOI: 10.1002/srin.201100267.
  • Kreyßig, A., Geißler, W., Kröger, M.
    Geometrieoptimierung für biegebeanspruchte Karosseriebauteile, in: Schriftenreihe Werkstoffe und werkstofftechnische Anwendungen, Band 47, S. 383-391, Hrsg.: B. Wielage, Chemnitz, 2012, ISBN 978-3-00-039358-7.
  • Kutzner, J., Rafaja, D., Kortus, J.
    On the possibility of a hetero-epitaxial Fe/ZrO2 interface: A density-functional-theory point of view, Modelling and Simulation in Materials Science and Engineering, 20 (2012) 045011, doi: 10.1088/0965-0393/20/4/045011.
  • Lee, S. J.; Mola, J.; Cooman, B. C.
    Conversation Model for the Martensitic Transformation of Banded Austenite in a Ferrite Matrix, METALLURGICAL AND MATERIALS TRANSACTIONS A, 43 (2012), pp. 4921-4925, DOI: 10.1007/s11661-012-1471-3.
  • Mandel, M., Krüger, L.
    Einfluss der Korngröße von zwei durch SPS hergestellten CrMnNi-TRIP-Stählen auf das elektrochemische Korrosionsverhalten, in: Schriftenreihe Werkstoffe und werkstofftechnische Anwendungen, Band 47, S. 370-376, Hrsg.: B. Wielage, Chemnitz, 2012, ISBN 978-3-00-039358-7.
  • Martin, S., Richter, S., Poklad, A., Berek, H., Decker, S., Martin, U., Krüger, L., Rafaja, D.
    Orientation relationships between phases arising during compression testing in ZrO2–TRIP-steel composites, Journal of Alloys and Compounds, 2012, in press, doi:10.1016/j.jallcom.2012.02.014.
  • Prüger, S., Mehlhorn, L., Soltysiak, S., Kuna, M.
    Influence of material and interface properties on the transformation behaviour of particle reinforced TRIP-matrix composites, Computational Materials Science, 64 (2012), pp. 273–277.
  • Prüger, S., Mehlhorn, L., Mühlich, U., Kuna, M.
    Untersuchung des Verstärkungsmechanismus in partikelverstärkten TRIP-Matrix-Compositen, in: Schriftenreihe Werkstoffe und werkstofftechnische Anwendungen, Band 47, S. 363-369, Hrsg.: B. Wielage, Chemnitz, 2012, ISBN 978-3-00-039358-7.
  • Schafföner, S., Aneziris, C. G.
    Pressure slip casting of coarse grain oxide ceramics, Ceramics International 38 (2012) S. 417–422.
  • Sieber, T., Mühlich, U., Liedke, T., Ballani, F.
    Simulation des Zugverhaltens von irregulären, offenzelligen Schäumen mit variierender Zellgeometrie, in: Schriftenreihe Werkstoffe und werkstofftechnische Anwendungen, Band 47, S. 357-362, Hrsg.: B. Wielage, Chemnitz, 2012, ISBN 978-3-00-039358-7.
  • Weider, M., Polzin, H., Göttert, M., Eigenfeld, K., Schärfl, W.
    Thermische Wechselwirkungen zwischen hochlegiertem TRIPStahlguss und wasserglasgebundenen Formstoffsystemen, GIESSEREI-PRAXIS, (2012) 5, S. 187-191.
  • Weigelt, C., Aneziris, C. G., Berek, H.
    Zirconia phase transformations in MMC composed of CrMnNi-TRIP-steel and ZrO2-ceramic, CELLMAT 2012, CD.
  • Weider, M.; Eigenfeld, K.
    Charakterisierung der Infiltration von TRIP-Stahl in ZrO2-Keramiken, Tagungsband zum Leder-Kolloquium,  2012, Freiberg, S. 41-44.
  • Wolf, S.
    Temperatur- und dehnratenabhängiges Werkstoffverhalten einer hochlegierten CrMnNi-TRIP/TWIP-Stahlgusslegierung unter einsinniger Zug- und Druckbeanspruchung, Dissertation, 2012, Shaker Verlag, ISBN: 978-3-8440-1530-0, ISSN: 0945-1056

2011

  • Berek, H.; Aneziris, C. G.; Hasterok, M.; Biermann, H.; Wolf, S.; Krüger, L.
    Stress Induced Phase Transformation in TRIP-Steel / Mg-PSZ Composites, Solid State Phenomena, Vol. 172-174 (2011), S. 709-714, DOI: 10.4028/www.scientific.net/SSP.172-174.709, Trans Tech Publications, Switzerland.
  • Berek, H.; Aneziris, C. G.; Wenzel, C.; Westphal, T.; Schärfl, W.
    Thermal Induced Phase Transformations in Mg-PSZ Fine-grain Ceramics Investigated by XRD and EBSD, refractories WORLDFORUM, Vol. 3 (2011) No 3, S. 123-128.
  • Berek, H.; Aneziris, C. G.; Hasterok, M.; Biermann, H.; Wolf, S.; Krüger, L.
    Investigation of Stress Induced Phase Transformation in TRIP-steel / Mg-PSZ Composites Using EBSD, Advanced Engineering Materials, Vol. 13 (2011), DOI: 10.1002/adem.201100014.
  • Berek, H.; Ballaschk, U.; Aneziris, C. G.
    In situ characterization of internal damage in TRIP-steel/Mg-PSZ composites under compressive stress using X-ray computed tomography, Advanced Engineering Materials, Vol. 13 (2011), No. 10, DOI: 10.1002/adem.201100117.
  • Berek, H.; Yanina, A.; Weigelt, C.; Aneziris, C. G.
    Determination of the Phase Distribution in Sintered TRIP-Matrix / Mg-PSZ Composites using EBSD, steel research int., 82 (2011) No. 9, S. 1094–1100, DOI: 10.1002/srin.201100064, Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.
  • Biermann; H.
    Editorial: TRIP-Matrix Composites, steel research int., 82 (2011) No. 1, S. 5, DOI: 10.1002/srin.201000296, Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.
  • Biermann, H.
    Preisträger des bundesweiten Schülerwettbewerbs zu Verbundwerkstoffen nominiert, DGM AKTUELL,13 (2011) No. 7, S. 10.
  • Borisova, D.; Klemm, V.; Rafaja, D.; Biermann, H.; Petrov, Y.; Gavriljuk, V.
    Nachweis von Keimstellen der Phasentransformation im CrMnNi­TRIP-Stahl mittels TEM, in WERKSTOFFE UND WERKSTOFFTECHNISCHE ANWENDUNGEN, Band 43, S. S. 302-313, Chemnitz, 2011, Hrsg.: B. Wielage, TU Chemnitz, Fakultät für Maschinenbau, Institut für Werkstoffwissenschaft und Werkstofftechnik, ISBN: 978-3-00-035177-8.
  • Borisova, D.; Klemm, V.; Schreiber, G.; Rafaja, D.
    In-Situ Study of the Microstructure Development in a CrMnNi TRIP Steel During Plastic, steel research int., 82 (2011) No. 9, S. 998-1003, DOI: 10.1002/srin.201100088, Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.
  • Dubberstein, T.; Hötzel, M.; Hagemann, R.; Heller, P.; Scheller, P. R.
    Some Thermophysical Properties of Liquid Cr-Mn-Ni-Steels, steel research int., 82 (2011) No. 9, S. 1122–1128, DOI: 10.1002/srin.201100096, Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.
  • Dubberstein, T.; Scheller, P. R.
    Bestimmung von Dichte und Oberflächenspannung hochmanganhaltiger Stähle in der Flüssigphase, in WERKSTOFFE UND WERKSTOFFTECHNISCHE ANWENDUNGEN, Band 43, S. S. 326-332, TU Chemnitz, Fakultät für Maschinenbau, Institut für Werkstoffwissenschaft und Werkstofftechnik, Eigenverlag, Chemnitz, August 2011, ISBN: 978-3-00-035177-8, Hrsg.: Univ.-Prof. Dr.-Ing. habil. B. Wielage.
  • Dubberstein, T.; Scheller, P. R.
    Determination of Surface Tension and Density for Liquid Steel by Maximum Bubble Pressure Method (MBP), in: Scientific Reports on Ressource Issues, Vol. 1, 2011, Hrsg.: C. Drebenstedt, TU Bergakademie Freiberg.
  • Ehinger, D.; Krüger, L.; Martin, U.; Weigelt, C.; Aneziris, C.G.
    Strain Rate Effect on Material Behavior of TRIP-Steel/Zirconia Honeycomb Structures, steel research int., 82 (2011) No. 9, S. 1048-1056, DOI: 10.1002/srin.201100076, Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.
  • Ehinger, D.; Krüger, L.; Martin, U.; Weigelt, C.; Aneziris, C.G.
    Verformungs- und Strukturverhalten von partikelverstärkten TRIPMatrix/Mg-PSZ-Composite-Wabenstrukturen, in Tagungsband zum 18. Symposium: Verbundwerkstoffe und Werkstoffverbunde in Chemnitz 2011, S. 58-63, Herausgegeben von Bernhard Wielage, ISBN 978-3-00-033801-4, ISSN 1439-1597.
  • Franke, P.; Ksyta, M.; Seifert, H. J.
    Interfacial Reactions in TRIP-Steel/ZrO2 Composites, steel research int., 82 (2011) No. 9, S. 1149–1157, DOI: 10.1002/srin.201100132, Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.
  • Geigenmüller, A.
    Social Capital and Relationship Effectiveness in University-Firm Cooperation, 2011 AMA Summer Marketing Educators’ Conference, August 5-8, San Francisco/USA.
  • Geigenmüller, A.; Biermann, H.
    Editorial: TRIP-Matrix Composites, steel research int., 82 (2011) No. 9, S. 983-984, DOI: 10.1002/srin.201100196, Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.
  • Glage, A.; Biermann, H.; Weider, M.; Eigenfeld, K.; Hasterok, M.; Aneziris, C. G.
    Verhalten von Stahl-Matrix-Verbundwerkstoffen mit Durchdringungsgefüge unter Druck- und Ermüdungsbeanspruchung, Schriftenreihe Werkstoffe und werkstofftechnische Anwendungen, Band 41, Hrsg.: B. Wielage, Chemnitz, 2011, S. 145-150, ISBN: 978-3-00-033801-4.
  • Glage, A.; Weider, M.; Hasterok, M.; Weidner, A.; Eigenfeld, K.; Aneziris, C.G.; Biermann, H.
    Mechanical properties of metal matrix composites based on TRIP steel and ZrO2 ceramic foams, Procedia Engineering 10 (2011) 548–555, 1877–7058, doi: 10.1016/j.proeng.2011.04.092, 2011, Published by Elsevier Ltd.
  • Glage, A.; Weidner, A.; Biermann, H.
    Cyclic Deformation Behaviour of Three Austenitic Cast CrMnNi TRIP/TWIP Steels with Various Ni Content, steel research int., 82 (2011) No. 9, S. 1040-1047, DOI: 10.1002/srin.201100080, Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.
  • Hasterok, M.; Wenzel, C.; Aneziris, C. G.; Ballaschk, U.; Berek, H.
    Processing of Ceramic Preforms for TRIP-Matrix-Composites, steel research int., 82 (2011) No. 9, S. 1032-1039, DOI: 10.1002/srin.201100079, Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.
  • Jahn, A.; Kovalev, A.; Weiß, A.; Scheller, P. R.
    Influence of Manganese and Nickel on the a´ Martensite Transformation Temperatures of High Alloyed Cr-Mn-Ni Steels, steel research int., 82 (2011) No. 9, S. 1108–1112, DOI: 10.1002/srin.201100063, Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.
  • Jahn, A.; Kovalev, A.; Weiß, A.; Wolf, S.; Krüger, L.; Scheller, P. R.
    Temperature Depending Influence of the Martensite Formation on the Mechanical Properties of High-Alloyed Cr-Mn-Ni As-Cast Steels, steel research international 82 (2011) No. 1, S. 39-44, Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim, DOI: 10.1002/srin.201000228.
  • Klostermann, J.; Schwarze, R.; Weider, M.; Brücker, Ch.
    Computational Fluid Dynamic (CFD) Simulations of Liquid Steel Infiltration in Ceramic Foam Structures. Part II: Application to Laboratory-Scale Experiments, steel research int., 82 (2011) No. 9, S. 1113–1121, DOI: 10.1002/srin.201100093, Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.
  • Kovalev, A.; Jahn, A.; Weiß, A.; Scheller, P. R.
    Characterization of the TRIP/TWIP effect in austenitic stainless steels using Stress-Temperature-Transformation (STT) and Deformation-Temperature-Transformation (DTT) Diagrams, steel research international 82 (2011) No. 1, S. 45-50, Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim, DOI: 10.1002/srin.201000245.
  • Kovalev, A.; Jahn, A.; Weiß, A.; Wolf, S.; Scheller, P. R.
    Stress-Temperature-Transformation and Deformation-Temperature-Transformation Diagrams for an Austenitic CrMnNi as-cast Steel, steel research int., 82 (2011) No. 9, S. 1101–1107, DOI: 110.1002/srin.201100065, 2011 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.
  • Krüger, L.; Decker, S.; Martin, S.; Martin, U.; Ehinger, D.; Ohser-Wiedemann, R.; Seifert, H. J.
    Dehnratenverhalten mittels Spark Plasma Sintering erzeugter Mg-PSZ-partikelverstärkter TRIP-Matrix-Composite, in: Schriftenreihe Werkstoffe und werkstofftechnische Anwendungen, Band 041, Hrsg.: B. Wielage, Chemnitz, 2011, S. 64-69, ISBN 978-3-00-033801-4, ISSN 1439-1597.
  • Krüger, L.; Decker, S.; Ohser-Wiedemann, R.; Ehinger, D.; Martin, S.; Martin, U.; Seifert, H. J.
    Strength and Failure Behaviour of Spark Plasma Sintered Steel-Zirconia Composites Under Compressive Loading, steel research int., 82 (2011) No. 9, S. 1017-1021, DOI: 10.1002/srin.201100082, Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.
  • Krüger, L.; Wolf, S.; Martin, S.; Martin, U.; Jahn, A.; Weiß, A.; Scheller, P. R.
    Strain Rate Dependent Flow Stress and Energy Absorption Behaviour of Cast CrMnNi TRIP/TWIP Steels, steel research int., 82 (2011) No. 9, S. 1087–1093, DOI: 10.1002/srin.201100067, Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.
  • Kulawinski, D.; Nagel, K.; Henkel, S.; Hübner, P.; Fischer, H.; Kuna, M.; Biermann, H.
    Characterization of stress–strain behavior of a cast TRIP steel under different biaxial planar load ratios, Engineering Fracture Mechanics, 78 (2011) 8, S. 1684–1695, DOI: 10.1016/j.engfracmech.2011.02.021.
  • Kulawinski, D.; Ackermann, S.; Glage, A.; Henkel, S.; Biermann, H.
    Biaxial Low Cycle Fatigue Behavior and Martensite Formation of a Metastable Austenitic Cast TRIP Steel Under Proportional Loading, steel research int., 82 (2011) No. 9, S. 1141-11148, DOI: 10.1002/srin.201100111, Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.
  • Kutzner, J.; Kortus, J.
    Einfluss der Legierung auf die elastischen Eigenschaften von austenitischen Eisenmischkristallen, Schriftenreihe Werkstoffe und werkstofftechnische Anwendungen, Band 043, Hrsg.: B. Wielage, Chemnitz, 2011, S. 314-318, ISBN 978-3-00-035177-8.
  • Lamowski, S.; Schmerler, S.; Kutzner, J.; Kortus, J.
    First Principles Calculation of the Thermal Volume Expansion Coeffi cient of Tetragonal Zircon Dioxide, steel research int., 82 (2011) No. 9, S. 1129-1132, DOI: 10.1002/srin.201100100, Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.
  • Man, J.; Obrtlík, K.; Petrenec, M.; Beran, P.; Smaga, M.; Weidner, A.; Dluhoš, J.; Kruml, T.; Biermann, H.; Eifler, D.; Polák, J.
    Stability of austenitic 316L steel against martensite formation during cyclic straining, Procedia Engineering 10 (2011), 1279–1284, doi: 10.1016/j.proeng.2011.04.213, Published by Elsevier Ltd. Selection and peer-review under responsibility of ICM11.
  • Martin, S.; Richter, S.; Decker, S.; Martin, U.; Krüger, L.; Rafaja, D.
    Reinforcing Mechanism of Mg-PSZ Particles in Highly-Alloyed TRIP Steel, steel research int., 82 (2011) No. 9, S. 1133-1140, DOI: 10.1002/srin.201100099, Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.
  • Martin, S.; Richter, S.; Rafaja, D.; Seifert, H. J.; Martin, U.; Decker, S.; Krüger, L.
    Mikrostrukturentwicklung von SPS gesinterten, partikelverstärkten TRIP-Stahl/MgO-PSZ-Kompositen durch Druckverformung, in: Schriftenreihe Werkstoffe und werkstofftechnische Anwendungen, Band 041, Hrsg.: B. Wielage, Chemnitz, 2011, S. 52-57, ISBN 978-3-00-033801-4, ISSN 1439-1597.
  • Martin, S.; Ullrich, C.; Simek, D.; Martin, U.; Rafaja, D.
    Stacking fault model of α´-martensite and its DIFFaX implementation, J. Appl. Cryst., 44 (2011), S. 779-787, ISSN 0021-8898, DOI: 10.1107/S0021889811019558.
  • Martin, S.; Wolf, S.; Martin, U.; Krüger, L.
    Influence of temperature on phase transformation and deformation mechanisms of cast CrMnNi-TRIP/TWIP steel, PTM, 2010, Avignon, Solid State Phenomena Vols. 172-174 (2011) S. 172-177, doi: 10.4028/www.scientific.net/SSP.172-174.172.
  • Mehlhorn, L.; Prüger, S.; Soltysiak, S.; Mühlich, U.; Kuna, M.
    Influence of Material and Interface Properties on the Overall Behaviour of Particle Reinforced Steel with Focus on the Phase Transformation Capabilities of the Individual Components, steel research int., 82 (2011) No. 9, S. 1022-1031, DOI: 10.1002/srin.201100083, 2011 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.
  • Poklad, A.; Klemm, V.; Schreiber, G.; Rafaja, D.; Abendroth, B.; Haverkamp, M.
    Orientation Relationship between the TRIP Steel Substrate and the ZrO2 thin Film, steel research int., 82 (2011) No. 9, S. 985-989, DOI: 10.1002/srin.201100086, Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.
  • Prüger, S.; Kuna, M.; Wolf, S.; Krüger, L.
    A Material Model for TRIP-Steels and its Application to a CrMnNi Cast Alloy, steel research int., 82 (2011) No. 9, S. 1070–1079, DOI: 10.1002/srin.201100072, 2011 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.
  • Schärfl, W.; Berek., H.; Aneziris, C. G.; Weider, M.; Yanina, A.
    Phase Composition of Mg-PSZ in Manganese Alloyed TRIP-Steel MMC Processed via Steel Casting and Conductive Sintering, ADVANCED ENGINEERING MATERIALS, 13 (6), S. 480-486, DOI: 10.1002/adem.201000373.
  • Schwarze, R.; Brücker, C.; Klostermann, J.
    Computational Fluid Dynamic (CFD) Simulations of Liquid Steel Infiltration in Ceramic Foam Structures. Part I: Fundamentals and Validation, steel research int. 82 (2011) No. 1, S. 56-62, DOI: 10.1002/srin.201000231.
  • Sieber, T.; Mühlich, U.; Liedke, T.; Ballaschk, U.; Berek, H.; Aneziris, C. G.; Ehinger, D.; Wolf, S.; Krüger, L.
    Deformation and Failure of Open-Cell Foams Made of TRIP-Steel-ZrO2-Composite Materials: Experimental Observations Versus Numerical Simulations, steel research int., 82 (2011) No. 9, S. 1004-1016, DOI: 10.1002/srin.201100089, 2011 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.
  • Sieber, T.; Mühlich, U.; Liedke, T.; Kuna, M.
    Simulation des mechanischen Verhaltens irregulärer, offenzelliger MMC-Schäume mit Hilfe von Balkennetzwerken generiert aus Laguerre-Mosaiken, in: Schriftenreihe Werkstoffe und werkstofftechnische Anwendungen, Band 43, S. 319-324, Hrsg.: B. Wielage, Chemnitz, 2011, ISBN 978-3-00-035177-8.
  • Weider, M.; Polzin, H.; Eigenfeld, K.; Schärfl, W.
    Thermal Interactions between Casted High-alloyed TRIP Steel and Sodium Silicate Bonded Moulding Systems, refractories WORLDFORUM 3 (2011) [4].
  • Weider, M.; Eigenfeld, K.
    Manufacturing of Austenitic Stainless Steel-Zirconia Composites by Infiltration, steel research int., 82 (2011) No. 9, S. 1064-1069, DOI: 10.1002/srin.201100071, Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.
  • Weidner, A.; Biermann, H.
    Microstructure evolution and phase transformation in a novel highalloyed TRIP steel observed during in-situ tensile and cyclic deformation, Key Engineering Materials Vol. 465, S. 350-353. DOI: 10.4028/www.scientific.net/KEM.465.350.
  • Weidner, A.; Biermann, H.; Yanina, A.; Guk, S.; Kawalla, R.; Berek, H.; Aneziris, C. G.
    In-situ Charakterisierung der Mikrostrukturentwicklung in einem TRIP-Matrix-Verbundwerkstoff, in Tagungsband zum 18. Symposium: Verbundwerkstoffe und Werkstoffverbunde in Chemnitz 2011, S. 70-77, Hrsg.:B. Wielage, ISBN 978-3-00-033801-4, ISSN 1439-1597.
  • Weidner, A.; Glage, A.; Sperling, L.; Biermann, H.
    Observation of stacking faults in a scanning electron microscope by electron channelling contrast imaging. International Journal of Materials Research (formerly Zeitschrift für METALLKUNDE) 102 (1), S. 3-5. DOI: 10.3139/146.110448.
  • Weidner, A.; Martin, S.; Klemm, V.; Martin, U.; Biermann, H.
    Stacking faults in high-alloyed metastable austenitic cast steel observed by electron channelling contrast imaging. Scripta Materiala, 64, S. 513-516. DOI: 10.1016/j.scriptamat.2010.11.028.
  • Weidner, A.; Yanina, A.; Guk, S.; Kawalla, R.; Biermann, H.
    Microstructure and Local Strain Fields in a High-Alloyed Austenitic Cast Steel and a Steel-Matrix Composite Material after in situ Tensile and Cyclic Deformation, steel research int., 82 (2011) No. 9, S. 990-997, DOI: 10.1002/srin.201100087, 2011 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.
  • Weigelt, C.; Aneziris, C. G.; Yanina, A.; Guk, S.
    Ceramic Processing for TRIP-Steel/Mg-PSZ Composite Materials for Mechanical Applications, steel research int., 82 (2011) No. 9, S. 1080–1086, DOI: 10.1002/srin.201100073, Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.
  • Weigelt, C.; Aneziris, C. G.; Berek, H.; Ehinger, D.; Martin, U.
    Martensitic Phase Transformation in TRIP-Steel/Mg-PSZ Honeycomb Composite Materials on Mechanical Load, Advanced Engineering Materials, 13 (2011) No. 10, DOI: 10.1002/adem.201100126, WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.
  • Wenzel, C.; Aneziris, C.G.
    Ceramic matrix composites based on Mg-PSZ with Cr–Ni-steel-additions with improved thermo-mechanical properties, Materials Science and Engineering B 176 (2011) S. 32–40, doi: 10.1016/j.mseb.2010.08.008.
  • Wenzel, C.; Aneziris, C.G.
    Development of Porous Ceramic Preforms Based on Magnesia Partially Stabilised Zirconia with Additions of MgAl2O4, MgO, Al2O3 and Ti, steel research int., 82 (2011) No. 9, S. 1057-1063, DOI: 10.1002/srin.201100070, Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.
  • Wenzel, C.; Weigelt, C.; Aneziris, C. G.
    Verbundwerkstoffe aus Stahl und Keramik mit verbesserten mechanischen Eigenschaften, in: Schriftenreihe Werkstoffe und werkstofftechnische Anwendungen, Band 041, Hrsg.: B. Wielage, Chemnitz, 2011, S. 46-51, ISBN: 978-3-00-033801-4, ISSN 1439-1597.
  • Yanina, A.; Guk, S.; Müller, W.; Kawalla, R.; Weigelt, C.
    Dynamic and Static Softening of Sintered MgO-PSZ/TRIP-matrix Composites with up to 10 vol.-% ZrO2, steel research int., 82 (2011) No. 9, S. 1158-1165, DOI: 10.1002/srin.2011001491, Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

2010

  • Aneziris, C. G.; Berek, H.; Hasterok, M.; Biermann, H.; Wolf, S.; Krüger, L.
    Novel TRIP-steel/Mg-PSZ composite-open cell foam structures for energy absorption, Adv. Eng. Mater ADVANCED ENGINEERING MATERIALS 12 (2010), S. 197-204. DOI: 10.1002/adem.200900273.
  • Aneziris, C. G.; Dudczig, S.; Gerlach, N.; Berek, H.; Veres, D.
    Thermal Shock Performance of Fine Grained Al2O3 ceramics with TiO2 and ZrO2 additions for Refractory Applications, ADVANCED ENGINEERING MATERIALS, 12 (6), S. 478–485. DOI: 10.1002/adem.201000037.
  • Berek, H.; Aneziris, C. G.; Hasterok, M.; Weigelt, C.
    Nachweis von spannungsinduzierten Phasenumwandlungen in TRIP-Matrix-Verbundwerkstoffen mittels EBSD, in WERKSTOFFE UND WERKSTOFFTECHNISCHE ANWENDUNGEN Band 37, Chemnitz, ISBN: 978-3-00-032471-0, S. 278-284.
  • Biermann, H.
    Visions made of steel and ceramics, Public Service Review: Science & Technology: issue 8, 2010, S. 38-39.
  • Biermann, H.; Martin, U.; Aneziris, C. G.; Kolbe, A.; Müller, A.; Schärfl, W.; Herrmann, M.
    Microstructure and compression strength of novel TRIP- steel/Mg-PSZ composites, 15th International Conference on the Strength of Materials (ICSMA-15), Journal of Physics: Conference Series 240 (2010) 012099, IOP Publishing, DOI:10.1088/1742-6596/240/1/012099.
  • Biermann, H.; Martin, U.; Aneziris, C. G.; Kolbe, A.; Müller, A.; Schärfl, W.; Herrmann, W.
    Microstructure and Compression Strength of Novel TRIP-Steel/Mg-PSZ Composites. In ADVANCED ENGINEERING MATERIALS 2009, 11, No. 12, S. 1000 -1006.
  • Borisova, D.; Schimpf, C.; Jahn, A.; Klemm, V.; Schreiber, G.; Simek, D.; Rafaja, D.
    Microstructure investigations of the phase boundaries in the Bridgman TRIP steel crystal, Solid State Phenomena Vol. 160 (2010), pp 211-216, DOI: 10.4028/www.scientific.net/Spp.10.211, Trans Tech Publications Ltd, Switzerland.
  • Decker, S.; Krüger, L.; Martin, U.; Ehinger, D.; Ohser-Wiedemann, R.; Seifert, H.-J.
    Dehnratenabhängigkeit Spark Plasma gesinterter TRIP-Matrix-Composite, in WERKSTOFFE UND WERKSTOFFTECHNISCHE ANWENDUNGEN, Band 37, Chemnitz, ISBN: 978-3-00-032471-0, S. 217-222.
  • Ehinger, D.; Aneziris, C. G.; Martin, U.; Krüger, L.; Weigelt, C.; Herrmann, M.
    Compressive deformation behavior and microstructure of extruded multi-cell TRIP-steel/Mg-PSZ columns, Cellular Materials(CELLMAT 2010),Dresden, 27.-29.10.2010, Fraunhofer Institut of Manufacturing Technology and Advanced Material IFAM Dresden, Edited by Stephani, Hipke, Scheffler & Adler, S. 365-370.
  • Ehinger, D.; Krüger, L.; Martin, U.; Weigelt, C.; Aneziris, C. G.
    Fließ- und Verfestigungsverhalten von TRIP-Matrix-Composite-Hohlstrukturen in Abhängigkeit von der Partikelverstärkung, in WERKSTOFFE UND WERKSTOFFTECHNISCHE ANWENDUNGEN, Band 37, Chemnitz, ISBN: 978-3-00-032471-0, S. 244-250.
  • Ehinger, D.; Weigelt, C.; Krüger, L.; Martin, U.; Aneziris, C. G.
    Charakterisierung partikelverstärkter TRIP-Matrix-Composite-Hohlstrukturen hinsichtlich ihrer Struktur- und Materialeigenschaften unter Out-of-Plane-Druckbeanspruchung, Tagungsband Werkstoffprüfung 2010 „Konstruktion, Werkstoffentwicklung und Schadensanalyse“, 02.-03.12.2010, Neu-Ulm.
  • Franke, P.; Seifert, H.-J.
    The influence of magnetic and chemical ordering on the phase diagram of Cr–Fe–Ni, In CALPHAD: Computer Coupling of Phase Diagrams and Thermochemistry. DOI:10.1016/j.calphad.2010.10.006.
  • Geigenmüller, A.; Biermann, H.
    Wege zur Promotion in Materialwissenschaft und Werkstofftechnik, DGM AKTUELL, 12 (2010) No. 10, S. 4-7.
  • Glage, A.; Biermann, H.
    Ermüdungsverhalten einer austenitischen Stahlgusslegierung, in WERKSTOFFE UND WERKSTOFFTECHNISCHE ANWENDUNGEN, Band 37, Chemnitz, ISBN: 978-3-00-032471-0, S. 257-263.
  • Glage, A.; Weidner, A.; Biermann, H.
    Effect of austenite stability on the low cycle fatigue behavior and microstructure of high alloyed metastable austenitic cast TRIP-steels. In Proc. Fatigue 2010, Procedia Engineering 2 (2010), 2085-2094, DOI:10.1016/j.proeng.2010.03.224, 2010 Published by Elsevier Ltd.
  • Guk, S.; Yanina, A.; Müller, W.; Kawalla, R.
    Mathematisch-physikalisches Modell zum konduktiven Sintern mit Strom zuleitenden Elektrodenstempeln eines Stahl-Keramik-Composites, Materialwissenschaft und Werkstofftechnik, Vol. 41, 2010, No. 1, 33-38, DOI: 10.1002/mawe.200900541, WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.
  • Guk. S.; Yanina, A.; Kawalla, R.; Weigelt, Ch.; Schärfl, W.; Aneziris, C. G.
    Bewertung und Vorhersage von mechanischen Eigenschaften und Porosität von Metall-Keramik-Compositen mit Zirkoniumdioxid (ОЦЕНКА МЕХАНИЧЕСКИХ СВОЙСТВ И ПОРИСТОСТИ ЦИРКОНИЕВОЙ МЕТАЛЛОКЕРАМИКИ), ВТОРАЯ МЕЖДУНАРОДНАЯ НАУЧНО-ТЕХНИЧЕСКАЯ КОНФЕРЕНЦИЯ, ИМЕТ РАН, 26-27 октября 2010 года, Москва.
  • Gutte, H.; Radtke, M.; Weiß, A.; Scheller, P. R.
    Stainless, austenitic cast steel with a TRIP effect, Giessereiforschung 62 (2010) No. 1, Giesserei-Verlag GmbH, Düsseldorf.
  • Henkel, S.; Holländer, D.; Wünsche, M.; Theilig, H.; Hübner, P.; Biermann, H.; Mehringer, S.
    Crack observation methods, their application and simulation of curved fatigue crack growth, Engineering Fracture Mechanics, Ms. Ref. No.: EFM-D-09-00426R1, DOI:10.10.16/j.engfracmech.2010.04.013, accepted.
  • Jahn, A.; Kovalev, A.; Wolf, S.; Weiss, A.; Krüger, L.; Scheller, P. R.
    Properties of high alloyed CrMnNi steels with strain induced α’ martensite formation, Inzynieria Materialowa Nr. 3/2010, S. 238-242.
  • Jahn, A.; Kovalev, A.; Weiß, A.; Scheller, P. R.; Wolf, S.; Krüger, L.
    Temperaturabhängigkeit der mechanischen Eigenschaften von hochlegierten gegossenen und warm gewalzten CrMnNi-TRIP/TWIP-Stählen, in WERKSTOFFE UND WERKSTOFFTECHNISCHE ANWENDUNGEN, Band 37, Chemnitz, ISBN: 978-3-00-032471-0, S. 251-256.
  • Klippel, U.; Aneziris, C. G.; Metzger, A. J.
    Shaped Coarse Grained Refractories by Pressure Slip Casting, Advanced Engineering Materials, 13 (2010) No. 1-2, S. 68-76, DOI: 10.1002/adem.201000215.
  • Klostermann, J.; Brücker, Ch.; Schwarze, R.
    Stahlinfiltration in poröse Keramikmatrizen: Numerische und experimentelle Modellierung des Prozesses auf der Porenskala, in WERKSTOFFE UND WERKSTOFFTECHNISCHE ANWENDUNGEN, Band 37, Chemnitz, ISBN: 978-3-00-032471-0, S. 229-235.
  • Kovalev, A.; Weiß, A.; Scheller, P. R.
    Einfluss der isothermischen α'-Martensitbildung auf mechanische Eigenschaften und Korrosionsbeständigkeit von hochlegierten CrMnNi-Stahlgusslegierungen, in: "Bote der staatlichen technischen Universität Perm. Maschinenbau, Werkstoffkunde", Nr. 5, Band 12, 2010, S. 7-14, ISSN 2072-0831.
  • Kreyßig, A.; Kröger, M.
    Auslegungsansätze für Wabenstrukturen in Crashbauteilen, in: WERKSTOFFE UND WERKSTOFFTECHNISCHE ANWENDUNGEN, Band 37, S. 333-337, Chemnitz, 2010, Hrsg.: B. Wielage, TU Chemnitz, Fakultät für Maschinenbau, Institut für Werkstoffwissenschaft und Werkstofftechnik.
  • Krüger, L.; Berge, F.; Wolf, S.; Martin, U.; Martin, S.
    Modellierung des temperatur- und dehnratenabhängigen Werkstoffverhaltens des austenitischen Stahles X2CrNiMo18-14-3, in WERKSTOFFE UND WERKSTOFFTECHNISCHE ANWENDUNGEN, Band 37, Chemnitz, ISBN: 978-3-00-032471-0. S. 264-270.
  • Krüger, L.; Ehinger, D.; Martin, U.; Martin, S.; Weigelt, Ch.; Aneziris, C. G.
    Microstructure and mechanical properties of cold extruded, cellular TRIP-matrix composite structures under quasi-static and dynamic compression, in WIT Transaction on The Built Environment, 112 (2010), Tallinn, S. 39-49, www.witpress.com, ISSN 1743-3509 (online).
  • Krüger, L.; Wolf, S.; Martin, U.; Martin, S.; Scheller, P. R.; Jahn, A.; Weiß, A.
    The influence of martensitic transformation on mechanical properties of cast high alloyed CrMnNi-steel under various strain rates and temperatures, 15th International Conference on the Strength of Materials (ICSMA-15), In Journal of Physics: Conference Series 240 (2010) 012098. DOI: 10.1088/1742-6596/240/1/012098, IOP Publishing.
  • Krüger, L.; Wolf, S.; Martin, S.; Rüssel, M.; Martin, U.; Jahn, A.; Weiß, A.; Scheller, P. R.
    Werkstoffverhalten einer TRIP/TWIP-fähigen CrMnNi-Stahlgusslegierung bis zu hohen Dehnraten. In MP Materials Testing 09/2010, Seite 588-595,Carl Hanser Verlag, 2010.
  • Kulawinski, D.; Nagel, K.; Henkel, S. Biermann; H.
    Charakterisierung des Fließverhaltens an einem TRIP-Stahlguss unter verschiedenen planar biaxialen Lastverhältnissen, in WERKSTOFFE UND WERKSTOFFTECHNISCHE ANWENDUNGEN, Band 37, Chemnitz, ISBN: 978-3-00-032471-0, S. 285-291.
  • Kutzner, J.
    Stability and properties of Fe/ZrO2 interfaces, (MM 43.2) Spring Meeting of the Condensed Matter Section, Regensburg, March 21 -26, 2010, Verhandlung DPG 45 (2010) 522.
  • Kutzner, J.; Kortus, J.
    DFT calculations on the Fe/ZrO2 system, (MM 5.2) Spring Meeting of the Condensed Matter Section, Dresden, March 22-27, 2009, Verhandlung. DPG 45 (2010) 408.
  • Martin, U.; Ehinger, D.; Krüger, L.; Martin, S.; Mottitschka, Th.; Weigelt, Ch.; Aneziris, C. G.; Herrmann, M.
    Cellular Energy Absorbing TRIP-Steel/Mg-PSZ Composite: Honeycomb Structures Fabricated by a New Extrusion Powder Technology, in Advances in Materials Science and Engineering, Volume 2010, Article ID 269537, Hindawi Publishing Corporation, DOI:10.1155/2010/269537.
  • Mehlhorn, L.; Prüger, S.
    Modellierung des Werkstoffverhaltens von TRIP-Stahlguss und ZrO2-Keramik, in WERKSTOFFE UND WERKSTOFFTECHNISCHE ANWENDUNGEN, Band 37, Chemnitz, ISBN: 978-3-00-032471-0, S. S. 292-300.
  • Nagel, K.; Kulawinski, D.; Henkel, S.; Hübner, P.; Biermann, H.
    Experimental investigation of stress-strain curves in a cast TRIP steel under biaxial planar loading, Proceedings of the 9th International Conference on Biaxial/Multiaxial Fatigue and Fracture, Parma, Italy, 2010, S. 227-234.
  • Poklad,, A.; Klemm, V.; Schreiber, G.; Wüstefeld, C.; Rafaja, D.
    Microstructure investigation of the PVD thin films of TRIP steels, Solid State Phenomena Vol. 160 (2010), pp 273-279, DOI: 10.4028/www.scientific.net/SSP.160.273, Trans Tech Publication Ltd, Switzerland.
  • Schärfl, W.; Jahn, A.; Weider, M.; Aneziris, C. G.
    Refractory Materials for Casting Manganese Alloyed, TRIP Steels, refractories WORLDFORUM 2 (3), S. 81-86.
  • Weider, M.; Eigenfeld, K.
    Einfluss der Prozessparameter auf die Herstellbarkeit von Stahl-Keramik-Verbundwerkstoffen, in WERKSTOFFE UND WERKSTOFFTECHNISCHE ANWENDUNGEN, Band 37, Chemnitz, ISBN: 978-3-00-032471-0, S. 223-228.
  • Weidner, A.; Biermann, H.
    Bestimmung lokaler Dehnungsfelder in einem TRIP-Stahl durch in-situ Verformungsexperimente im Rasterelektronenmikroskop, in WERKSTOFFE UND WERKSTOFFTECHNISCHE ANWENDUNGEN, Band 37, Chemnitz, ISBN: 978-3-00-032471-0, S. 271-277.
  • Weidner, A.; Glage, A.; Biermann, H.
    In-situ Characterization of the Microstructure Evolution during Cyclic Deformation of Novel TRIP Steel. In Proc. Fatigue 2010, Procedia Engineering 2 (2010), 1961-1971, DOI: 10.1016/j.proeng.2010.03.211, 2010 Published by Elsevier Ltd.
  • Weigelt, C.; Giersberg, S.; Wenzel, C.; Aneziris, C. G.
    Screening of the Interactions Between Mg-PSZ and TRIP-Steel and Its Alloys During Sintering, Advanced Engineering Materials, 12 (6), S. 486–492.
  • Weiß, A.; Tranta, F.; Scheller, P.R.; Kovalev, A.
    Beitrag zum γ↔ε- Umwandlungsverhalten austenitisch-martensitischer FeMn(Cr)-Stähle, Sonderbände der Praktischen Metallographie, 42 (2010), S. 283-288.
  • Yanina, A.; Guk, S.; Müller, W.; Kawalla, R.
    Einfluss der Sinterparameter auf die mechanischen Eigenschaften von TRIP-Matrix-Composit-Werkstoffen, in WERKSTOFFE UND WERKSTOFFTECHNISCHE ANWENDUNGEN, Band 37, Chemnitz, ISBN: 978-3-00-032471-0, S. 236-243.
  • Yanina, A.; Guk, S.; Müller, W.; Kawalla, R.; Weigelt, Ch.; Schärfl, W.; Aneziris, C. G.
    Einfluss der Sinterparameter auf die Sinterkinetik und mechanischen Eigenschaften von MMC (ВЛИЯНИЕ ТЕХНОЛОГИЧЕСКИХ ПАРАМЕТРОВ СПЕКАНИЯ ПОРОШКОВЫХ ЗАГОТОВОК ИЗ МЕТАЛЛОКЕРАМИКИ НА СРАЩИВАНИЕ И МЕХАНИЧЕСКИЕ СВОЙСТВА ПОЛУЧАЕМЫХ МАТЕРИАЛОВ), ВТОРАЯ МЕЖДУНАРОДНАЯ НАУЧНО-ТЕХНИЧЕСКАЯ КОНФЕРЕНЦИЯ, ИМЕТ РАН, 26-27 октября 2010 года, Москва.

2009

  • Aneziris, C. G.; Biermann, H.; Schärfl, W.; Ballaschk, U.; Martin, U.
    MMC aus TRIP-Stahl und MgO teilstabilisiertem ZrO2 durch bildsame Formgebung. In Verbundwerkstoffe 17. Symposium Verbundwerkstoffe und Werkstoffverbunde, 2009, S. 147-154, ISBN: 978-3-527-32615-0.
  • Aneziris, C. G.; Biermann, H.; Schärfl, W.; Ballaschk, U.; Martin, U.
    Verbundwerkstoffe aus TRIP-Stahl und MgO-teilstabilisiertem ZrO2 durch bildsame Formgebung, “, in Zeitschrift für Freunde und Förderer der Technischen Universität Bergakademie Freiberg, 16. Jahrgang 2009, S. 37-39, Freunde und Förderer der TU Bergakademie Freiberg e. V., Technische Universität Bergakademie Freiberg.
  • Aneziris, C. G.; Schärfl, W.; Biermann, H.; Martin, U.
    Energy-Absorbing TRIP-Steel/Mg-PSZ Composite Honeycomb Structures Based on Ceramic Extrusion at Room Temperature. In Int. J. Appl. Ceram. Technol., 6 [6] 727–735 (2009), DOI: 10.1111/j.1744-7402.2008.02321.x.
  • Biermann, H.; Aneziris, C. G.; Kuna, M.
    Sonderforschungsbereich TRIP-Matrix-Composite. In Verbundwerkstoffe, 17. Symposium Verbundwerkstoffe und Werkstoffverbunde, 2009, S. 39-45, DGM Deutsche Gesellschaft für Materialkunde e. V., WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.
  • Biermann, H.; Aneziris, C. G.; Kuna, M.
    Collaborative Research Centre TRIP-Matrix-Composite, in ESOMAT 2009-The 8th European Symposium on Martensitic Transformations, 05002, 2009, edited by P. Šittner, L. Heller and V. Paidar, published by EDP Sciences (www.esomat.org), DOI: 10.1051/esomat/200905002.
  • Biermann, H.; Martin, U.; Aneziris, C. G.; Kolbe, A.; Müller, A.; Schärfl, W.; Herrmann, W.
    Microstructure and Compression Strength of Novel TRIP-Steel/Mg-PSZ Composites. In ADVANCED ENGINEERING MATERIALS 2009, 11, No. 12, S. 1000 -1006, WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.
  • Dommaschk, C.; Eigenfeld, K.; Weider, M.
    Stahl in Keramik – neue Verbundwerkstoffe. In Deutscher Gießereitag 2009 am 14./15. Mai in Berlin-Tagungsband, S. 31 – 32.
  • Geigenmüller, A.
    Visionen aus Stahl und Keramik: Der Sonderforschungsbereich 799 „TRIP-Matrix Composite“, in Zeitschrift für Freunde und Förderer der Technischen Universität Bergakademie Freiberg, 16. Jahrgang 2009, S. 34-36, Freunde und Förderer der TU Bergakademie Freiberg e. V., Technische Universität Bergakademie Freiberg.
  • Glage, A.; Weidner, A.; Richter, T.; Trubitz, P.; Biermann, H.
    Low cycle fatigue behavior and microstructure of a high alloyed metastable austenitic cast TRIP-steel, in ESOMAT 2009-The 8th European Symposium on Martensitic Transformations, 05007, 2009, edited by P. Šittner, L. Heller and V. Paidar, published by EDP Sciences (www.esomat.org), DOI: 10.1051/esomat/200905007.
  • Jahn, A.; Kovalev, A.; Weiß, A.; Scheller, P. R.; Wolf, S.; Krüger, L.; Martin, S.; Martin, U.
    Mechanical properties of high alloyed cast and rolled CrMnNi TRIP steels with varying Ni contents, in ESOMAT 2009-The 8th European Symposium on Martensitic Transformations, 05013, 2009, edited by P. Šittner, L. Heller and V. Paidar, published by EDP Sciences (www.esomat.org), DOI: 10.105.1051/esomat/200905013.
  • Jahn, A.; Weiß, A.; Scheller, P. R.
    Stähle für höchste Beanspruchungen, In stahl und eisen 129 (2009) Nr. 11, S. 92-100.
  • Klostermann, J.; Brücker, Ch.; Schwarze, R.
    Multi-scale two-phase flow simulations of steel infiltration in a porous ceramic matrix, STEELSIM2009 3rd International Conference Simulation and Modelling of Metallurgical Processes in Steelmaking, 8.-10. September, 2009, Leoben, S. 280-286.
  • Krüger, L.; Wolf, S.; Martin, U.; Scheller, P. R.; Jahn, A.; Weiß, A.
    Strain rate and temperature effects on stress-strain behaviour of cast high alloyed CrMnNi-steel, “Dymat” 9th International Conference on the Mechanical and Physical Behaviour of Materials under Dynamic Loading 06.-11.09. 2009, Brüssel, In DYMAT 2009, S. 1069-1074, DOI: 10.1051/dymat/2009149, EDP Sciences.
  • Krüger, L.; Wolf, S.; Rüssel, M.; Martin, S.; Martin, U.; Jahn, A.; Weiß, A.; Scheller, P. R.
    Fließspannungsverhalten und Mikrostrukturentwicklung einer TRIP-Stahlgusslegierung bei hohen Dehnraten, Tagung Werkstoffprüfung 2009, 3.+4. Dezember 2009, Bad Neuenahr. In Fortschritte der Kennwertermittlung für Forschung und Praxis, S. 35-40, ISBN: 978-3-514-00769-7, M. Borsutzki und S. Geisler Verlag Stahleisen GmbH Düsseldorf, 2009.
  • Kutzner, J.; Kortus, J.
    DFT calculations on the Fe/ZrO2 system, (MM 5.3) Spring Meeting of the Condensed Matter Section, Dresden, March 22-27, 2009, Verhandlung. DPG 45 (2010) 408.
  • Martin, U.; Aneziris, C. G.; Biermann, H.; Müller, A.; Kolbe, A.; Schärfl, W.
    Mikrostruktur und Druckfestigkeit von neuen TRIP-Stahl/Zirkonoxid Verbundwerkstoffen. In Sonderbände der Praktischen Metallographie 41 (2009), Fortschritte in der Metallographie, S. 253-258, Werkstoff-Informationsgesellschaft mbH.
  • Martin, S.; Müller, A.; Martin, U.
    Gefügeinterpretation von verformten, hochlegierten CrMnNi-TRIP-Stahlguss mittels EBSD. In Sonderbände der Praktischen Metallographie 41 (2009), Fortschritte in der Metallographie, S.127-132, Werkstoff-Informationsgesellschaft mbH.
  • Martin, S.; Wolf, S.; Martin, U.; Krüger, L.; Jahn, A.
    Investigations on martensite formation in CrMnNi-TRIP steels, in ESOMAT 2009-The 8th European Symposium on Martensitic Transformations, 05022, 2009, edited by P. Šittner, L. Heller and V. Paidar, published by EDP Sciences (www.esomat.org), EDP Sciences, DOI: 10.1051/esomat/200905022.
  • Schöpe, T.; Geigenmüller, A.; Enke, M.; Biermann, H.
    Ingenieurmangel fordert Schülerwerbung - neue Formate und Kooperationspartner, DGM AKTUELL, 11 (2009) No. 5, S. 4-7.
  • Weiß, A.; Gutte, H.; Jahn, A.; Scheller, P. R.
    Nichtrostende Stähle mit TRIP/TWIP/SBIP Effekt, in Materialwissenschaft und Werkstofftechnik, 40, 2009, No.6, 606-611, DOI: 10.1002/mawe.200800361, WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.
  • Yanina, A.; Guk, S.
    Die Besonderheiten des Sinterns von TRIP-Matrix-Compositen auf der Basis von Stahl und Keramik durch konduktives Erwärmen (Osobennosti processa spekanija kompozitnogo TRIPmateriala na osnove stali I keramiki metodom kodyktivnogo nagreva), In Fortschrittliche Technologien zur Plastischen Deformation (Progressivnie technologii Plastitcheskoj deformacii), 21.-26. September 2009, MISIS, Moskau, ISBN 9785- 87623-278-6.